LUNT LS12CaKMDs2 Ca-K filter in extension tube

Calcium-K module in star diagonal, for using normal astronomical telescopes up to 100mm aperture and up to 540mm focal length as Ca-K solar telescopes.This Calcium-K module transforms your normal astronomical refractor telescope into a Ca-K solar telescope. It will be very easy: Put the Ca-K module into the 2" focuser of your telescope, and you are ready for solar observing in the light of the Calcium-K wavelength.Internal narrowband filters allow for a <2.4 Angstrom bandwidth. For refractor telescopes up to 100mm aperture and up to 540mm focal length. For imaging it will be better to use a bigger Ca-K module.The Ca-K module is in a 90° star diagonal, for 2" focuser on the telescope side, and with T2 thread and 1.25" eyepiece connection on the eyepiece side.All needed filter parts are integrated inside the compact module. There are no additional filters needed.The Ca-K wavelength is at the edge of the visible light spectrum for human eyes, so for many people visual observing is difficult. However, all details could be captured photographically. Therefore the Ca-K Module is optimized primarily for imaging.FEATURESBandwidth <2.4 AngstromUsable at telescopes up to 100mm aperture and 540mm focal90° star-diagonal housing2" slide tube for 2" focuserConnection for 1.25" eyepiecesT2 thread for camera connectionSCOPE OF DELIVERYCa-K module in 90° star diagonal for 2" focuserIntegrated blocking filter B600 for telescopes up to 540mm focal lengthInstruction manual

Calcium-K module in star diagonal, for using normal astronomical telescopes up to 100mm aperture and up to 1620mm focal length as Ca-K solar telescopes.This Calcium-K module transforms your normal astronomical refractor telescope into a Ca-K solar telescope. It will be very easy: Put the Ca-K module into the 2" focuser of your telescope, and you are ready for solar observing in the light of the Calcium-K wavelength.Internal narrowband filters allow for a <2.4 Angstrom bandwidth. For refractor telescopes up to 100mm aperture and up to 1620mm focal length. For imaging it will be better to use a bigger Ca-K module.The Ca-K module is in a 90° star diagonal, for 2" focuser on the telescope side, and with T2 thread and 1.25" eyepiece connection on the eyepiece side.All needed filter parts are integrated inside the compact module. There are no additional filters needed.The Ca-K wavelength is at the edge of the visible light spectrum for human eyes, so for many people visual observing is difficult. However, all details could be captured photographically. Therefore the Ca-K Module is optimized primarily for imaging.FEATURESBandwidth <2.4 AngstromUsable at telescopes up to 100mm aperture and 1620mm focal90° star-diagonal housing2" slide tube for 2" focuserConnection for 1.25" eyepiecesT2 thread for camera connectionSCOPE OF DELIVERYCa-K module in 90° star diagonal for 2" focuserIntegrated blocking filter B1800 for telescopes up to 1620mm focal lengthInstruction manual

Modular designed multipurpose telescope, both for observing the sun in the H-alpha wavelength, as well as for night sky observations. Easy conversion between the different applications with a few simple steps. Excellent image quality due to 2-lens ED optics with 70mm aperture for night sky observation, and 60mm usable aperture for H-alpha solar observation.With innovative air pressure tuning system and high-quality 2 inch (50.8mm) Rack&Pinion (R&P) focuser. Delivered without blocking filter, use for H-Alpha sun observation only possible with additional blocking filter!This telescope is supplied without blocking filter. We offer a wide range of additionally available blocking filters in different sizes, either mounted in a 90° star-diagonal housing or in a straight extension tube. These are all usable with this telescope.ATTENTION: Without such an additional blocking filter you cannot use this telescope for H-alpha solar observation!Solar observing in H-alpha:The LS60MT is a telescope for observing the sun in H-alpha light, with 60mm free aperture (no central obstruction) and 420mm focal length. The H-alpha wavelength is the most impressive way to observe the sun, showing protuberances at the sun's edge, filaments and flares on the surface, and much more. An internal Etalon filter achieves a bandwidth of <0.7 Angstrom with the innovative air pressure tuning system Pressure-Tuner. Tuning is done by slightly changing the air pressure in a pressure chamber inside the telescope. This changes the refractive index of the air, making it easy to tune to the H-alpha line. The pressure tuner guarantees a homogeneous image, without central obstruction, and a permanently protected Etalon without erosion. A set of collimating lenses installed in the telescope ensures best performance.Fine adjustment is achieved with a solid 2 inch Rack&Pinion focuser with 10:1 reduction.This version of the LS60MT is delivered without blocking filter. Therefore an additional blocking filter is required to use the telescope for solar observation in the H-alpha wavelength. You can choose from the wide range of Lunt Solar Systems blocking filters and decide for example if you want a blocking filter in a 90° star-diagonal housing or one in a straight extension tube.Observing the starry night sky:The H-alpha Etalon system can be removed from the telescope in a few easy steps thanks to its modular design. The 2-lens ED refractor can then be used as a normal telescope with 70mm aperture and 420mm focal length for observation and photography of the night sky. The ED Doublet lens will offer an excellent image. It can be used with a standard 2 inch zenith mirror or other accessories at the R&P focuser, the back focus is 135mm.With an additional Amici prism, the telescope can of course also be used during the day for nature and landscape observations.This makes the LS60MT, with its small dimensions and low weight, also an ideal travel telescope for all applications!More applications:With additionally available accessories the LS60MT offers even more possibilities!- Double-StackThe LS60MT telescope can optionally be upgraded with the additionally available double-stack filters LS50FHa or LS60FHa (part numbers 0550200 and 0550250). These filters will be simply screwed on the front of the LS60MT, no additional adapters are necessary. Thereby a bandwidth of <0.5 Angstrom is achieved for H-alpha solar observation. Therefore much more details on the solar surface will become visible.- Solar observing in White-LightIf the H-alpha unit has been removed, of course either a sun filter to be installed in front of the objective, or a Herschel-wedge at the focuser can be used to observe the sunspots in White-Light.- Solar observing in Ca-K wavelengthCertainly, the Ca-K filter modules from Lunt Solar Systems can also be used at the LS60MT to observe and photograph super-granulation and other effects visible in this wavelength on the sun.This makes the LS60MT a completely universal usable telescope!FEATURES2-lens ED refractor, FPL-51Aperture: 70mmUsable aperture in H-alpha: 60mm (no central obstruction)Focal length: 420mmBandwidth: internal Etalon with <0.7 AngstromTuning: air pressure tuning system Pressure-TunerSupplied without blocking filter, additionally available blocking filter absolutely necessary!Focuser: Rack&Pinion focuser with 10:1 reductionTube-ring with 1/4-20 tapped base (standard thread for photo-tripods)Weight with H-alpha unit: 3.8kgWeight without H-alpha unit: 2.6kgLength with H-alpha unit and blocking filter: 40cmLength without H-alpha unit: 31cmSCOPE OF DELIVERYLS60MT Multipurpose TelescopePressure-Tuner2 inch Rack&Pinion focuserTube ring with 1/4-20 connection for mounting on photo-tripodsTransport case (53x33x17cm)Instruction manual

The Vixen corrector PH is a 3-element Wynne corrector for demanding applications. Designed for the Vixen R200SS Newtonian reflector, but also suitable for other optics with similar specifications.The optical design consists of 3 lenses in 3 groups. The corrector provides excellent correction of system-induced coma of parabolic mirrors and the resulting spherical aberration. The corrected field has a diameter of 44 mm, making it suitable for the 24x36 mm format (full-frame DSLR/CCD cameras). This guarantees razor-shape images across the entire field. The lens surfaces are coated with a cutting-edge 99.9% anti-reflective AS coating, which is also used for Vixen's flagship VSD100F3.8.Turn your Vixen R200SS reflector telescope into the perfect astrograph!FEATURESPremium coma corrector for the R 200SS Newton refelctor 3 lens systems in 3 groups, guarantees absolute colour purity and sharp stars to the edge of the field of viewImage illumination up to 44 mm for full-frame imagesReduces the focal length of the R 200SS from 800 mm to 760 mm 1:3.8Also suitable for visual observations with an eyepiece adapterWeight: 175 gDELIVERY CONTENTComa correctorDust caps on front and back

The Riser Base increases the distance between the TELRAD viewfinder and the telescope tube. This allows a more comfortable view into the viewfinder. FEATURES Increases the distance between TELRAD viewfinder and telescope tube Enables a more comfortable view into the viewfinder Dimensions: 180 x 60 x 102 mm; weight: 120 g SCOPE OF DELIVERY 1x TELRAD Riser Base 102 mm (4")

Explore Scientific 8x50 illuminated finder scopes (available in straight-thru and right angle versions) produce images that are right-side-up and left-to-right corrected views, which makes it easier to find objects in the sky. The Explore 8 X 50 Straight-Thru Erect Image Illuminated Finder Scope, with its scale markings and open Center, not only helps you center objects precisely, but gives a reference of the exact field of view in Degrees. The deep red Illumination can be adjusted to just the right brightness. The eyepiece has comfortable eye relief and produces a 6,97 degrees field of view. Both the eyepiece and the main objective can be focused independently so that you can obtain perfect focus for your eyes. The straight-thru finderscope weights just under a pound (450gr), and measures 216mm" x 63mm" x 58mm". FEATURES High quality 8x50 upright viewfinder With adjustable crosshair lighting with scale markings Perfect image sharpness and good viewing behaviour Large field of view FOV of 6.96 degrees Focusing of lens and crosshair separately possible.  Multi-coated lens surfaces. Power supply by 2 pcs coin battery type LR41.FEATURESHigh quality 8x50 upright viewfinderWith adjustable crosshair illumination and with scale markingsPerfect image sharpness and good viewing behaviourLarge field of view FOV of 6.96 degreesFocusing of lens and crosshair separately possibleMulti-coated lens surfacesSCOPE OF DELIVERYFinder scopeFinder bracket

Adapter plate for mounting a LUNT LS100FHa front-filter at a telescope with 161mm to 180mm front outer diameter.With this adapter you can mount a LS100FHa at your existing astronomical telescope with 161mm to 180mm outer diameter, in order to use this telescope for solar observing in H-alpha. The adapter is plugged onto the front of your telescope, and the filter can be screwed onto the adapter.PLEASE NOTE:This article no. 0557445 gives only the price for a complete range of different adapter-plates of 161mm to 180mm diameter. The real adapter-plate will be manufactured exactly for your telescope. Therefore we need the exact outside diameter of your telescope or the dew shield!When ordering, you will find a field for comments, please note there the appropriate diameter!Then we will manufacture a adapter-plate for the diameter that you have noted. Manufacturing time will be 2 to 3 weeks.If you have any questions, you can contact us by e-mail or telephone.SCOPE OF DELIVERY1x adapter plate manufactured by your specifications(Filter not included)Delivery time 2-3 weeks