LUNT LS130TBP&F conversion kit for LS130MT

Modular designed multipurpose telescope, both for observing the sun in the H-alpha wavelength, as well as for night sky observations. Easy conversion between the different applications with a few simple steps. 3-lens apochromatic telescope with FPL-51 glass, 130mm aperture and 910mm focal length - excellent image quality for H-Alpha solar observation and also for observing the starry sky at night. With innovative air pressure tuning system, good 2 inch (50.8mm) R&P focuser, and B3400 blocking filter. Solar observing in H-alpha: The LS130MT/B3400 is a complete telescope for observing the sun in H-alpha light, with 130mm free aperture (no central obstruction) and 910mm focal length. The H-alpha wavelength is the most impressive way to observe the sun, showing protuberances at the sun's edge, filaments and flares on the surface, and much more. An internal Etalon filter achieves a bandwidth of <0.7 Angstrom with the innovative air pressure tuning system Pressure-Tuner. Tuning is done by slightly changing the air pressure in a pressure chamber inside the telescope. This changes the refractive index of the air, making it easy to tune to the H-alpha line. The pressure tuner guarantees a homogeneous image, without central obstruction, and a permanently protected Etalon without erosion. A set of collimating lenses installed in the telescope ensures best performance. Fine adjustment is achieved with a solid 2 inch R&P focuser with 10:1 reduction. Blocking-filter is the B3400. The B3400 is good for solar imaging by cameras with very large sensor chips, and can also be used for visual observing. The B3400 blocking-filter is fix installed inside the 2 inch R&P focuser. Observing the starry night sky: The H-Alpha Etalon system can be removed from the telescope in a few easy steps thanks to its modular design. Then the 3-lens apochromatic refractor can be used as a normal telescope with 130mm aperture and 910mm focal length for observation and photography of the night sky. The FPL-51 triplet lens offers an outstandingly low colour aberration image. Common 2 inch star diagonals can be used at the R&P focuser of the telescope. Please note that the optionally available conversion kit 0551696 is absolutely necessary for the LS130MT version with B3400 blocking filter if the telescope is also to be used at night. The conversion kit is not required for the versions with B1200 and B1800. More applications: With additionally available accessories the LS130MT offers even more possibilities! - Double-Stack The LS130MT telescope can optionally be upgraded with the additionally available double-stack module LS130MT/DSII (item number 0551690). The DSII system is a internal double-stack module with Pressure-Tuner. Thereby a bandwidth of <0.5 Angstrom is achieved for H-alpha solar observation. Therefore much more details on the solar surface will become visible. - Solar observing in White-Light If the H-alpha unit has been removed, of course either a sun filter can be installed in front of the objective, or a Herschel-wedge at the focuser can be used to observe the sunspots in White-Light. - Solar observing in Ca-K wavelengthThe additionally available "LUNT Ca-K Filter Module for LS130MT" (item number 0551697) can be used on the LS130MT to observe and photograph super-granulation and other effects visible at this wavelength on the sun. This makes the LS130MT a completely universal usable apochromatic telescope of highest quality! FEATURES 3-lens APO refractor, FPL-51 Aperture: 130mm (no central obstruction) Focal length: 910mm Bandwidth: internal Etalon with <0.7 Angstrom Tuning: air pressure tuning system Pressure-Tuner Blocking filter: B3400 with 2 inch connection Focuser: R&P with 10:1 reduction Two tube-ring with handle Sol-Searcher installed inside handle Dovetail bar at GP-level for astronomical mounts Weight: 12.1kg Length with dew-shield: 95cm Length removed dew-shield: 80cm SCOPE OF DELIVERY LS130MT Multipurpose Telescope Pressure-TunerB3400 blocking filter installed inside focuserTube extension for using without H-alpha Etalon 2 inch R&P focuser with 10:1 reduction Tube rings with dovetail bar Transport case (92 x 42 x 35 cm) Instruction manual

Complete H-alpha Solar Telescope with 130mm aperture and <0.7 Angstrom bandwidth. With Feather-Touch focuser, advanced air-pressure tuning system, and B1800 Blocking Filter.The LS130MT is a triplet ED apochromatic refractor with modular design! The telescope can also be used for night sky observations, and with the optional available accessories also for observing the sun in the Ca-K wavelength and in White-Light!The LS130MT/B1800 is a complete telescope for observing the sun in H-alpha light, with 130mm free aperture (no central obstruction) and 910mm focal length. The higher resolution compared to telescopes with smaller aperture allows the observer to dive into the fine details and surface phenomena of our ever-changing Sun. The higher resolution allows higher magnifications, bringing the fine details of the Sun to life in the eyepiece or on the screen.An internal Etalon filter with the innovative air pressure tuning system Pressure Tuner achieves a bandwidth of <0.7 Angstroms. The tuning is done by slightly changing the air pressure in a pressure chamber inside the telescope. This changes the refractive index of the air, making it easy to adjust to the H-alpha line. The pressure tuner guarantees an homogeneous image without central obstruction and a permanently protected etalon without wear. A set of collimating lenses installed in the telescope ensures best performance.Fine adjustment is achieved by a 2" Starlight-Instruments Feather-Touch focuser with 1.5" travel and 10:1 reduction.Blocking-filter is the B1800. The B1800 is good for visual solar observing and also for solar imaging by cameras with small to large CCD chip. We recommend a LS130MT with B3400 blocking-filter by using cameras with very large sized CCD chips.The star diagonal in which the blocking filter is installed, is equipped as standard for 1.25" eyepieces and with a T2 camera connection.Also the LS130MT telescope is upgradeable with the additional available DSII double-stack system (item no. 0551690). The optional DSII system is a internal double stack module with Pressure Tuner, that provides a bandwidth <0.5 Angstrom. More details on the solar surface will become visible by reducing the bandwidth.Modular design:The H-Alpha Etalon system can be easily removed from the telescope. The 3-lens ED Apochromat can be used as a normal telescope for observation and imaging of the night sky.Also available is a Ca-K module (item number 0551697) specially developed for the LS130MT. This also allows to observe the sun in the blue calcium wavelength.A Herschel-wedge (item number 0558201) can also be used for observing the sun in white light.This makes the LS130MT a completely universal usable telescope!FEATURESTriplet ED apochromatic refractor, FPL-51Aperture: 130mm (no central obstruction)Focal length: 910mmBandwidth: internal Etalon with <0.7 AngstromTuning: air-pressure tuning systemBlocking-filter: B1800 with 1.25" and T2 connectionFocuser: Starlight-Instruments Feather-Touch focuser with 10:1 reductionTwo tube rings with carrying handleDove tail bar with GP level for astronomical mountsWeight: 12.1kgLength with blocking-filter and dew-shield: 100cmLength without blocking-filter and removed dew-shield: 80cmSCOPE OF DELIVERYLS130MT multipurpose telescopePressure-Tuner systemB1800 blocking-filter in star-diagonal2" Feather-Touch focuserTube-extension for using without H-alpha EtalonTube rings with dove tail barTransport case (92x42x35cm)Instruction manual

Vixen has developed a new generation of SX mounts for demanding observers and astrophotographers. The SXD2WL mount is simply operated via a Wifi module with a smartphone or tablet. By controlling the mount with your smartphone using the free STAR BOOK Wireless app, you can easily use sky navigation functions such as automatic GoTo panning of celestial objects via your smartphone or tablet. By eliminating the power consumption of the conventional LCD (STAR BOOK TEN), the power consumption on the mount is reduced by up to 20%, thus enabling longer astronomical observation and astrophotography. When the desired celestial object is selected from a list, it is automatically panned into the telescope's field of view and tracking begins. An existing STAR BOOK TEN controller can also be used on this mount without any problems. Equipped with the same precision stepper motors as the top model, the AXD mount, the SXD2WL brings a new standard of performance and precision to the Vixen mount family. With a photographic load capacity of 15 kg, the axis cross of the mount weighs just 9.2 kg making it ideal for mobile observations. In addition, the motors mounted in the lower part of the mount also serve as a counterweight, so the mount requires fewer weights for balancing. The SXD2 mount in detail Precision stepper motors and micro-step motion control system At the heart of the SXD2 are the precision stepper motors, which offer better performance and response than previous models. The micro-step motion control system offers powerful and yet very smooth drive characteristics, which are given both in fine movements and in fast pans. Built-in bearings The bearings of the RA and DEC axes and the worm shafts have been significantly improved to reduce the load on the motors. As a result, the motors move much more smoothly than in previous models. High-precision worm gears High-precision processing technologies eliminate worm gear errors. The edges of the two worms and worm wheels are particularly smooth, enabling very precise tracking. Declination axis as counterweight The solid motor units are installed in the lower part of the declination axis so that the center of gravity of the SXD2 is below the intersection point of the RA and DEC axes. This means you need fewer additional counterweights. Latitude setting The latitude is adjustable between 0 and 70 degrees (divided into 3 zones and adjustable +/- 15 degrees per zone, for high, medium and low latitudes); latitude scale in 2-degree increments; fine adjustment with a tangent screw head, approx. 0.8 degrees per turn. Built-in PFL-II polar finder with illumination The built-in 5x20mm polar finder with 10° field of view has a 3-star alignment system. This eliminates the inconvenience of setting the date and original time. The illuminated reticle with variable brightness and automatic switch-off is adjustable in 8 levels and illuminated in red. The adjustment accuracy is 3 arc minutes. The wireless module in detail The Vixen Wifi adapter for EQ mounts allows you to control your Vixen mount via a smartphone or tablet. With the smartphone app STAR BOOK Wireless (free of charge) you can navigate the sky without any cables. The app turns your smartphone or tablet into a control unit for the equatorial mount in no time at all. The response delay of the mount, which is considered the biggest disadvantage of wireless connections, has been reduced to a level comparable to wired connections. Reduced power consumption compared to conventional controllers with LCD monitor The power consumption of the mount is reduced by up to 20%, allowing longer observations than with conventional wired controllers such as the STAR BOOK TEN. Operation similar to the STAR BOOK TEN controller. The STAR BOOK Wireless app has a similar structure to the STAR BOOK TEN controller. Depending on the star map setting, it contains up to 259,000 celestial objects. Tap on a celestial object in the object list and start the GoTo. The mount will now automatically move to this target and bring it into the telescope's field of view. All the popular features of the STAR BOOK TEN are retained Convenient operation When looking through the telescope operate the mount by swiping on the app's star chart. As there are no buttons, simply slide your finger over the star chart to operate the mount conveniently. Extensive astronomical data included In addition to data on easily observable celestial bodies such as Messier objects, NGC objects and IC objects, this also includes the sun, moon, planets, comets and dwarf planets. High-precision alignment By aligning the mount to one or two stars, you can already achieve fairly precise positioning. By aligning the mount to three or more stars, you can achieve high-precision alignment of the mount for high magnifications. The objects are then approached precisely and centrally in your telescope's field of view. The alignment information is saved and can be retained even when the device is switched off. By leaving the telescope in its current state after completing an observation without moving it, you can start the automatic installation with the same settings for the next observation.  Individual setting options As with the STAR BOOK TEN control unit, the app offers various individual settings, such as gear backlash compensation, night mode in red, autoguider and variable GoTo speed and LED brightness. You can also set the timing of the reversal of the objective tube (meridian flip) as desired. Even if the object moves to the south during tracking, you can prevent the telescope tube from reversing. Important note: Cannot be used on old SX mounts with the old blue Star Book! Technical information about the Wifi module: CPU with 32-bit CISC processor 120 MHz The unit is connected to the mount via a D-SUB 9PIN connector as with the STAR BOOK TEN. It has a 6-pin 6-wire modular plug for external autoguider operation. Supported operating systems are Android 6 or higher, iOS 9.0 or higher, WLAN standard: IEEE 802.11b/g/n. FEATURESRA sprocket: 180 teeth DEC sprocket: 180 teeth Shaft material and diameter: Carbon steel / Decl. 35 mm, RA 40 mm thickness Polar finder scope: 6x20 mm, PFL-II polar finder Fine height adjustment: 0° to 70°, (fine adjustment +/- 15°, height) Backsight rod: 20 mm diameter Azimuth adjustment: worm fine adjustment Power supply: DC12 V; 0.4~1.7 A Maximum load: 15 kg, photographic, without counterweight Counterweight: 1x 1.9 kg and 1x 3.7 kg Tripod connection: 45 mm spigot Dimensions: 36 cm (H) x 12 cm (W) x 36 cm (L) Weight: 8.8 kg (19.4 lb), without counterweight 32-bit CISC processor 120 MHz Operating system: Android 6 or higher, iOS 9.0 or higher Connection: D-SUB 9PIN connector Autoguider input ST4 Power consumption SXD2WL+Wireless unit: DC12V / 0.3-2.0 A (load 10 kg), 0.4-2.2 A (load 15 kg) SCOPE OF DELIVERYSXD2WL EQ mount Wireless unit 2 counterweights: 1.9 kg and 3.7 kg Mounting tools Pole finder PFL-II Cigarette lighter cable

​The LS100MT solar telescopes can be upgraded with this optional conversion kit. This allows the telescopes to be used as 3-lens ED apochromatic refractor for observation and photography of the starry night sky.The H-Alpha system of the LS100MT telescopes can be easily replaced by this conversion kit. The conversion kit offers a very high quality and solid R&P focuser. Even the heaviest cameras or other accessories will be hold without any problems and can be focused sensitively by the integrated 10:1 reduction.Simply loosen three knurled screws holding the H-Alpha unit including the focuser at the LS100MT. Attach here the new focuser, and your LS100MT is transformed into a full 3-lens apochromatic telescope. The new focuser offers 95mm focusing way with backlash- and tilt-free mechanics also when using heavy accessories. A 2 inch ring-clamp is directly at the focuser, and an adapter to 1.25 inch also with ring-clamp is included in delivery.But this is not all: With this conversion kit Herschel-wedges or Ca-K modules can be used at the LS100MT telescopes for solar observation. This makes it possible to observe the sun in H-alpha, in Calcium-K wavelength light, or in White-Light - with one and the same telescope!This conversion kit turns the LS100MT into a real all-round telescope!FEATURESBacklash- and tilt-free mechanics95mm focusing way10:1 reduction2 inch and 1.25 inch ring clampingSCOPE OF DELIVERYHigh quality 2 inch focuser with adapter to LS100MT telescopesAdapter from 2 inch to 1.25 inchInstruction manualLS100MT telescope not included! Can only be used together with a LS100MT solar telescope. This conversion kit is absolutely necessary if a LS100MT telescope should be used for night sky observation.

Want to explore the night sky? With the BRESSER JUNIOR 70/400 refracting telescope with backpack, you can quickly set off on your own astronomical voyage of discovery. With an aperture of 70 mm and a focal length of 400 mm, the telescope has what it takes to show you plenty of impressive celestial objects. So that you can get started quickly, the telescope comes with all accessories you will need: 3 eyepieces, a star diagonal mirror, a 1.5x reverse lens, a finder scope and a smartphone holder. So, grab your backpack, find the perfect observation spot and get going! Off on a nocturnal adventure with the children’s telescope! Put together in just a few steps, the lightweight and compact refracting telescope allows you to quickly see deep into space. The azimuthal mount is very easy to operate, simply swivel the finder scope to the left and right, up and down. Moon, Orion Nebula or Pleiades – with the aid of the 5x24 finder scope, you can enjoy the perfect overview of the night sky ahead of the high magnification, and target what you want to view with ease. With the three eyepieces, you can take a closer look at the moon, planets and stars, one step at a time. These give you three different magnifications: 20x, 33x and 66x. The 1.5x reverse lens increases this by another 1.5x to 30x, 50x and 100x. The star diagonal mirror allows you to look through the telescope with comfort, even when it is pointed vertically into the sky. Get a close up of the sky, day and night, with the telescope for children Want to explore our beautiful earth, in addition to the night sky? Simply use the refracting telescope with the star diagonal mirror during the day. This will make the image appear upright and laterally correct, which is ideal for viewing landscapes and wildlife. Whether it’s the sky or the earth that interests you, you’re guaranteed fascinating views with the telescope. You can easily capture what you see with your smartphone – simply attach your phone to the eyepiece with the smartphone holder, take snapshots of your favourite subjects and share them with friends and family. Once you’ve finished with your observations, put everything back in the sturdy backpack in chic Astro and BRESSER FAMILY design. If you don’t have any experience with astronomical telescopes, we recommend the book ‘Telescope Driving Licence’, which provides an easy introduction to amateur astronomy. And if you want to find out more about the sun, moon, stars and other space objects, we recommend reading the book “Julius researches the universe – Research, discover, and crafting”, which is full of interesting facts, exciting experiments and space-themed handicraft ideas. FEATURES Refracting telescope for young astronomy enthusiasts aged 8 and over With handy BRESSER JUNIOR backpack Easy to use thanks to azimuthal mount Objective lens diameter: 70 mm Focal length: 400 mm Magnification: 20x-100x Star diagonal mirror for comfortable viewing and upright laterally correct image With 1.5x reverse lens  Smartphone holder for first astro photography Size: Tripod: 55-125 x 77 cm Telescope: 77 x 15 x 15 cm Backpack: 45 x 30 x 11 cm Weight: 1.75 kg SCOPE OF DELIVERY Children’s telescope Backpack 5x24 finder scope Star diagonal mirror 3 eyepieces (H20/H12/H6) 1.5x reverse lens Height-adjustable aluminium tripod Smartphone holder Instruction manual

This Ca-K module can be used at the LS130MT/B1200 and LS130MT/B1800 telescopes to observe the Sun also in the Calcium-K line. At the LS130MT/B3400 additionally the conversion kit for the LS130MT is required (item number 0551696).You can use this Ca-K module with your LS130MT telescope to observe and photograph the Sun not only in H-alpha, but also in the blue calcium-K wavelength. Here again completely different phenomena become visible on the Sun than in H-alpha.This Ca-K module was specially designed for the LS130MT H-Alpha telescope. If the H-alpha Etalon unit is removed from the LS130MT, the Ca-K module is simply inserted into the focuser instead of the blocking-filter.The additional conversion kit 0551696 is necessary at the LS130MT/B3400, because at this telescope the blocking filter is fix installed inside the focuser.For human eyes, the calcium-K light is just at the limit of the visible range. Many people have problems with visual observation. However, this does not apply to photography, where the Ca-K module shows everything the Sun has to offer in this wavelength.SCOPE OF DELIVERY2'' Ca-K Module for LS130MT telescopeInstruction manualLS130MT telescope and conversion kit not included! Can only be used together with an LS130MT solar telescope, at LS130MT/B3400 additional conversion kit 0551696 necessary.This Ca-K module is also available for the LS130MT/B3400 as a set together with the required conversion kit (item number 0551695).

The optics of the VMC260L are significantly better than the traditional Schmidt-Cassegrain telescope. Despite its high 3000 mm focal length, it is just 650 mm long. Featuring a large 260 mm aperture, the telescope collects large amounts of light for serious professional observations and photography of the planets and countless deep-sky objects. Thanks to the dielectric mirrors, the VMV260L guarantees razor-sharp images and maximum brightness. The open lens barrels cool the telescope quicker than conventional closed Cassegrain systems. The telescope can be used with an optional 0.62x focal reducer to reduce the aperture ratio to 1:7.1. This shortens the exposure times and allows you to photograph large objects. The telescope comes with a standard dovetail bar and a carry handle that doubles up as a camera holder for night sky photography. The Finder Scope and the Vixen Flip Mirror is not included in this version ! FEATURES Very short cool-down time thanks to open lens barrel Optimised system for photography Very transportable – only 650 mm long Lightweight design – only 12.1 kg Large 260 mm aperture Built-in correction lens in front of the secondary mirror Backfocus without Reducer: 149,4 mmBackfocus with Reducer: 63,5 mmTotal weight: 12.1 kg WHAT’S INCLUDED VMC 260 telescope/lens barrel Carry handle VIXEN standard dovetail barFinder Bracket ShoeEA60 mm to 50.8 mm SX