LUNT LS50FHa/B1200d2 H-alpha solar filter

Embark on a voyage of discovery through our solar system and beyond using the BRESSER Spica-II reflector telescope. You can start straight away with your new hobby, because this complete astronomy set already comes with everything you need for exciting observations: an astronomical reflector telescope with 130 mm aperture and 1000 mm focal length, an equatorial mount, a tripod and extensive accessories. Perfect for the astro-novice: the system is very easy to use. So look forward to fascinating sights especially of the Moon, the planets and the Sun. Perfect combination of mirror and lens – the telescope Using the Spica-II you’ll start your celestial exploration tour with a classic reflecting telescope of the "Newton" type with an additional lens inside the focuser. This combination of mirror and lens is called "catadioptric". It’s immediately noticeable with this type of telescope that you do not look in at the back, but at the front and laterally. What is the advantage? Even if the telescope is pointed vertically into the sky, you can observe the beauties of the night sky in a comfortable posture. In addition, catadioptric telescopes impress with their transportability, because despite the long focal length, the tube is comparatively short. With its 130 mm aperture, the Spica-II already collects a lot of light from celestial objects. In addition, 130 mm aperture and 1000 mm focal length result in a focal ratio (ratio of aperture to focal length) of 1 to 7.7 (F/7.7). This means you can enjoy an image with good contrast even at high magnifications. Thus, the telescope is well suited for observing the planets and details on the Moon. Even some deep sky objects are worth looking at through this entry-level telescope: admire open star clusters and globular clusters as well as bright so-called planetary nebulae such as the Ring Nebula M57 in the constellation Lyra. And how big will the nocturnal highlights appear? The 130 mm aperture achieves a resolution that allows magnifications of up to about 260x with sharp images. Technically, even more is possible – theoretically up to 750x with the included accessories. However, as the magnification increases, the sharpness of the image may slowly decrease. In addition, as is so often the case in astronomy, you are also dependent on the prevailing conditions. For example, the air turbulence in the atmosphere (seeing conditions) always plays a role in your magnification possibilities. Note for nature lovers: If you choose a Newtonian telescope like the Spica-II reflector telescope, you can look forward to a specialist in astronomical observation. However, the image is always displayed laterally reversed as well as upside down, which makes no difference when observing the sky. However, this type of telescope is less suitable for nature and landscape observation during the day. Would you like to use your new telescope for exciting nature discoveries as well? Then we recommend that you choose one of the BRESSER refractor telescopes. A good foundation for your astro-start – mount and tripod If you want to look up at the sky, you need a solid base on the ground. That's why you will find a robust height-adjustable aluminium tripod and an equatorial mount in your telescope set. The special advantage of this type of mount: unlike an azimuthal model, the movement of the celestial bodies is compensated for only on one axis instead of two. For this purpose, one axis of the equatorial mount is aligned parallel to the Earth's axis in the course of the so-called "alignment". This is easily done by pointing it approximately at Polaris. Perfect for convenient adjustment and tracking of the entry-level telescope: the axes can be moved precisely via the two flexible shafts with fine adjustment. And if you simply place smartphone adapter, eyepieces etc. on the convenient storage plate between the tripod legs, you will have the equipment you need quickly at hand.Keep track of things automatically: For this telescope’s equatorial EQ-3 mount, the tracking motor with item number 4951400 is available as an optional accessory. This eliminates the need to manually track a celestial object set in the telescope. When this motor is installed at the mount, it automatically tracks the celestial object, keeping it in the field of view of the eyepiece. This makes observing the night sky even more comfortable! Everything for the astro-beginner – the accessoriesFor your start into the wonderful world of astronomy, the Spica-II beginner's telescope comes with lots of accessories. The LED viewfinder, for example, is great for orientation in the night sky. You simply install the direction finder parallel to the actual telescope. It projects a red dot onto a small ground-glass screen that appears to float in front of the sky when you look through it. In this way, it shows you where the telescope is pointing. A great help for the exact alignment of the telescope and the easy location of celestial objects before you gaze at them with higher magnifications. You determine how detailed you observe your discoveries by using one of the two eyepieces, each of which provides a different magnification. They are fitted with standard 1.25-inch (31.7 mm) diameter sockets which allow them to be easily inserted into the eyepiece focuser of the entry-level telescope. Would you like to look even closer? Then grab the 3x barlow lens, which triples the magnification of the eyepieces in no time. Explore the astronomical highlight of the daytime sky: With the safe solar filter you can examine sunspots as well as granulation on the Sun. CAUTION: Never point the telescope at the Sun without the solar filter! There is also a suitable accessory for your first steps in astrophotography: with the smartphone adapter, you can use your mobile phone as a camera on the telescope. First snapshots of the Moon or Sun made easy! FEATURES Reflector telescope with 130 mm aperture and 1000 mm focal length Reflector type catadioptric Well suited for observing the Sun, Moon and planets Height-adjustable tripod with equatorial EQ3 mount Precise adjustment through flexible shafts and fine adjustment in both axes Easy to use, very good for beginners Focal ratio F/7.7, therefore good for observing the planets and details on the Moon 1.25-inch focuser (31.7 mm) Two eyepieces and one barlow lens with 1.25-inch (31.7 mm) sockets for different magnifications Safe solar observation with the included solar filter First steps in astrophotography with smartphone camera adapter SCOPE OF DELIVERY Telescope Aluminium tripod Equatorial EQ3 mount Eyepieces: 4 mm and 20 mm (1.25-inch sockets) Barlow lens 3x (1.25-inch socket) LED illuminated viewfinder Solar filter Smartphone camera adapter Accessory tray Astronomy software as download Instruction manual

This transport case is suitable for all 50mm telescopes of the LS50THa series, and also for all 40mm telescopes of the LS40THa series.Foam not included! The foam of the LS50THa or LS40THa telescope boxes falls into place to this transport case.FEATURESTransport case dimensions: 48 x 28 x 18 cmSCOPE OF DELIVERYTransport Case for LS50THa and LS40THa telescopes(Telescope and foam not included!)

NOTE: This item is a used or returned product. This means: The item may show slight signs of use and the packaging may differ from the original packaging. Please note that refurbished items generally come with a 12-month warranty.

Blocking-filter in 90° zenith mirror diagonal, for telescopes up to 1080mm focal length, and with 1.25 inch (31.7mm) focuser. Can only be used together with a LUNT H-alpha filter, or with a LUNT H-alpha telescope!Lunt Solar Systems offers blocking-filters in different sizes, and alternatively in 90° star-diagonal housings or straight extension tubes. You can choose what blocking-filter you will use at your LUNT H-alpha Etalon system.The B1200d1 is installed in a 90° star-diagonal housing, for 1.25 inch (31.7mm) focuser on the telescope side, and with T2 thread and 1.25 inch eyepiece connection on the eyepiece side. The B1200d1 can be used at LUNT H-alpha systems, if the used telescope has a 1.25 inch focuser and up to 1080mm focal length.The blocking-filter can not be used without additional H-alpha filter system from Lunt Solar Systems! Blocking-filters are absolutely required for the safety and performance of H-alpha telescopes for solar observing. Lunt Solar Systems blocking-filters contain a unique filter system. We can only warranty safety or performance, if blocking-filter is paired with a H-alpha filter or H-alpha telescope of Lunt Solar Systems.At the tab "Accessories" you will find H-Alpha telescopes and filters with which this blocking filter can be combined.FEATURESBlocking-filter only usable at additional H-alpha filter systemFilter diameter: 12mmUsable at telescopes up to 1080mm focal90° star-diagonal housing1.25 inch slide tube for 1.25 inch focuserConnection for 1.25 inch eyepiecesT2 thread for camera connectionSCOPE OF DELIVERYBlocking-filter B1200d1 in 90° star-diagonal for 1.25 inch focuser

The three-lens design of the EXPLORE SCIENTIFIC ED-Apochromats provides everything an amateur astronomer desires - at a reasonable price. The construction with Hoya FCD-1 ED glass has two air spaces and provides a level of correction so superior to the two-lens constructions, that are common in this price class, that you will see the difference immediately. This excellent optical performance teams up with a high precision mechanics - the result is a telescope on a level that is setting a new standard in it´s price class. Astrophotographers will love this telescope - a optional field flattner is available and makes the telescope perfect even for cameras with a large chip format.These very popular EXPLORE SCIENTIFIC Triplet ED APO Refractors we do offer in 3 different product lines:Essential Line: HOYA FCD-1 Glass lens, AL-Tube, 2.0" Rack&Pinion Focusser with 1:10, 2.0" Star Diagonal 99% Reflectivity (see Part No. 0112084(AL), 0112106(AL), 0112132(AL)), 0112155(CF + 3"FT)) Professional Line: HOYA FCD-100 Glas lens, AL/CF-Tube, 2.5" HEXAFOC Focusser with 1:10, 2.0" Star Diagonal 99% Reflectivity (see Part No. 0112086(AL), 0112108(AL), 0112109(CF), 0112134(AL), 0112135(CF))High-End Line: OHARA FPL-53 Glass lens, Carbon(CF) Tube, 3.0" Feather-Touch Focusser with 1:10, 2.0" Star Diagonal 99% Reflectivity (see Part No. 0112165(CF))FEATURESthree lens air-spaced ED-apochromatHoya FCD01-ED glasspolystrehl of above 0.9weight: 2,6kgbackfocus: 165mm above 2" adaptorSCOPE OF DELIVERYOptics with dovetail plate and finder slot 2" Star Diagonal 99% reflectivityDust caps for front-lens and focuser

Modular designed multipurpose telescope, both for observing the sun in the H-alpha wavelength, as well as for night sky observations. Easy conversion between the different applications with a few simple steps. 3-lens apochromatic telescope with FPL-53 glass, 100 mm aperture and 714 mm focal length - excellent image quality for H-Alpha solar observation and also for observing the starry sky at night. With innovative air pressure tuning system, good 2 inch (50.8 mm) R&P focuser, and B3400 blocking filter. Solar observation in H-alpha: The LS100MT/B3400 is a complete telescope for observing the sun in H-alpha light, with 100 mm free aperture (no central obstruction) and 714 mm focal length. The H-alpha wavelength is the most impressive way to observe the sun, showing protuberances at the sun's edge, filaments and flares on the surface, and much more. An internal Etalon filter achieves a bandwidth of <0.7 Angstrom with the innovative air pressure tuning system Pressure-Tuner. Tuning is done by slightly changing the air pressure in a pressure chamber inside the telescope. This changes the refractive index of the air, making it easy to tune to the H-alpha line. The pressure tuner guarantees a homogeneous image, without central obstruction, and a permanently protected Etalon without erosion. A set of collimating lenses installed in the telescope ensures best performance. Fine adjustment is achieved with a solid 2 inch R&P focuser with 10:1 reduction. Blocking filter is the B3400. The B3400 is good for solar imaging by cameras with very large sensor chips and can also be used for visual solar observing. The B3400 blocking filter is permanently installed inside the 2 inch R&P focuser. Common 2 inch star diagonals or other 2 inch accessories can be used. Observing the starry night sky: The H-Alpha Etalon system can be removed from the telescope in a few easy steps thanks to its modular design. With the additionally available conversion kit (item number 0551430) the 3-lens apochromatic refractor can then be used as a normal telescope with 100 mm aperture and 714 mm focal length for observation and photography of the night sky. The FPL-53 triplet lens offers an outstandingly low colour aberration image. Common 2 inch star diagonals can be used at the high quality R&P focuser of the conversion kit 0551430. Please note that the optionally available conversion kit 0551430 is absolutely necessary if the telescope should be used at night. More applications: With additionally available accessories the LS100MT offers even more possibilities! - Double-Stack The LS100MT telescope can optionally be upgraded with the additionally available double-stack module DSII/SFPT (item number 0551395). The DSII system is an internal double-stack module. Thereby a bandwidth of <0.5 Angstrom is achieved for H-alpha solar observation. Thus much more details on the solar surface will become visible. - Solar observing in White-Light If the H-alpha unit has been removed, of course either a sun filter to be installed in front of the objective, or a Herschel-wedge at the focuser can be used to observe the sunspots in White-Light. - Solar observing in Ca-K wavelength Certainly, the Ca-K filter modules from LUNT Solar Systems can also be used at the LS100MT to observe and photograph super-granulation and other effects visible in this wavelength on the sun. This makes the LS100MT a completely universal usable apochromatic telescope of the highest quality! FEATURES 3-lens APO refractor, FPL-53 Aperture: 100 mm (no central obstruction) Focal length: 714 mm Bandwidth: internal Etalon with <0.7 Angstrom Tuning: air pressure tuning system Pressure-Tuner Blocking filter: B3400 with 2 inch connection Focuser: R&P with 10:1 reduction Two tube-ring with handle Sol-Searcher installed inside handle Dovetail bar at GP-level for astronomical mounts Weight: 6.8 kg Length with dew-shield: 78 cm Length with removed dew-shield: 65 cm SCOPE OF DELIVERY LS100MT Multipurpose Telescope Pressure-Tuner B3400 blocking filter installed inside focuser 2 inch R&P focuser with 10:1 reduction Tube rings with dovetail bar Transport case (78 x 33 x 23 cm) Instruction manual Conversion kit for observation of the starry night sky (0551430) not included!