LUNT LS60FHa/B3400 H-alpha solar filter

​Modular designed multipurpose telescope, both for observing the sun in the H-alpha wavelength, as well as for night sky observations. Easy conversion between the different applications with a few simple steps. 2-lens ED Apo telescope with FPL-53 glass, 80mm aperture and 560mm focal length - very good image quality for H-Alpha solar observation and also for observing the starry sky at night.With innovative air pressure tuning system, good 2 inch (50.8mm) R&P focuser, and B1200 blocking filter.Solar observing in H-alpha:The LS80MT/B1200 is a complete telescope for observing the sun in H-alpha light, with 80mm free aperture (no central obstruction) and 560mm focal length. The H-alpha wavelength is the most impressive way to observe the sun, showing protuberances at the sun's edge, filaments and flares on the surface, and much more. An internal Etalon filter achieves a bandwidth of <0.7 Angstrom with the innovative air pressure tuning system Pressure-Tuner. Tuning is done by slightly changing the air pressure in a pressure chamber inside the telescope. This changes the refractive index of the air, making it easy to tune to the H-alpha line. The pressure tuner guarantees a homogeneous image, without central obstruction, and a permanently protected Etalon without erosion. A set of collimating lenses installed in the telescope ensures best performance.Fine adjustment is achieved with a solid 2 inch R&P focuser with 10:1 reduction.Blocking-filter is the B1200. The B1200 is good for visual solar observing. Also solar imaging is possible by cameras with small sensor chip. We recommend a LS80MT with B1800 blocking-filter by using cameras with large sized sensor chips.The star diagonal in which the blocking filter is installed, is equipped as standard for 1.25 inch eyepieces and with a T2 camera connection.Observing the starry night sky:The H-Alpha Etalon system can be removed from the telescope in a few easy steps thanks to its modular design. With the additionally available conversion kit (item number 0551330) the 2-lens ED Apo refractor can then be used as a normal telescope with 80mm aperture and 560mm focal length for observation and photography of the night sky. The FPL-53 doublet lens offers an low colour aberration image. Common 2 inch star diagonals can be used at the high quality R&P focuser of the conversion kit 0551330.Please note that the optionally available conversion kit 0551330 is absolutely necessary if the telescope should be used at night.More applications:With additionally available accessories the LS80MT offers even more possibilities!- Double-StackThe LS80MT telescope can optionally be upgraded with the additionally available double-stack module DSII/SFPT (item number 0551395). The DSII system is a internal double-stack module. Thereby a bandwidth of <0.5 Angstrom is achieved for H-alpha solar observation. Therefore much more details on the solar surface will become visible.- Solar observing in White-LightIf the H-alpha unit has been removed, of course either a sun filter to be installed in front of the objective, or a Herschel-wedge at the focuser can be used to observe the sunspots in White-Light.- Solar observing in Ca-K wavelengthCertainly, the Ca-K filter modules from Lunt Solar Systems can also be used at the LS80MT to observe and photograph super-granulation and other effects visible in this wavelength on the sun.This makes the LS80MT a completely universal usable ED Apo telescope of very good quality!FEATURES2-lens ED APO refractor, FPL-53Aperture: 80mm (no central obstruction)Focal length: 560mmBandwidth: internal Etalon with <0.7 AngstromTuning: air pressure tuning system Pressure-TunerBlocking filter: B1200 with 1.25" and T2 connectionFocuser: R&P with 10:1 reductionTwo tube-ring with handleSol-Searcher installed inside handleDovetail bar at GP-level for astronomical mountsWeight: 4.95kgLength with blocking filter and dew-shield: 62cmLength without blocking filter and removed dew-shield: 50cmSCOPE OF DELIVERYLS80MT Multipurpose TelescopePressure-TunerB1200 blocking filter in star-diagonal housing2 inch R&P focuser with 10:1 reductionTube rings with dovetail bar and sol-searcherTransport case (78x33x23cm)Instruction manualConversion kit for observation of the starry night sky (0551330) not included!

The BRESSER Science ETD-201 is a high-quality stereo reflected-light and transmitted-light microscope. It is perfectly qualified for medical applications, the use in agriculture and forestry, in criminology, in academic and scientific institutes and schools, as well as for the assembly and quality assurance of components in precision mechanics and electronic engineering. The extra wide foot with stage and exceptionally tall height range permit observations of large objects. The integrated reflected- and transmitted-light illumination can be used in combination and is dimmable. The angle of incidence can be user-friendly adjusted and locked in position. A continuous range of magnification from 8x to 50x is possible with the exchangeable wide field eyepieces (WF 10x) and the 6.25-times stereo zoom objective lens (0,8x-5x).The interpupillary distance and dioptre compensation can be adjusted individually. The trinocular microscope head is rotatable (360°) and comes with two 45° inclined eyepiece tubes and a separate camera tube for the attachment of a c-mount camera or MikroCam.SCOPE OF DELIVERYMicroscope zoom headMicroscope stand2x eyepiece (WF 10x)Glass platePlastic plate (black & white)Dust coverManual

60mm H-alpha solar filter system with B600 blocking filter, for front mounting at telescopes with 1.25" focuser, and up to 540mm focal length.The LS60FHa H-alpha Etalon filter system with 60mm aperture (no central obstruction) for use on any refractor and many other telescopes. Because the LS60FHa has an estimated bandwidth of <0.75 Angstrom it is capable to providing high contrast views of both solar surface and edge detail (prominences).The system includes the B600 blocking filter, which is usable for telescopes up to 540mm focal length. Larger blocking filters suitable for longer focal length are also optional available. The blocking filter is installed in a 90° star diagonal for 1.25" focuser. This diagonal is equipped with a reception for 1.25" eyepieces and a T2 camera connection.Adding an additional available double-stack Etalon system will reduce the bandwidth to ~<0.55 Angstrom.FEATURESAperture: 60 mmNo central obstructionBandwidth: <0.75 AngstromTuning: tiltable EtalonHousing diameter: 95 mmLength: 85 mmWeight: 0.85 kgFront thread: M90x1 female threadRear thread: M90x1 male threadBlocking filter: B600 in diagonal for 1.25" focuserMaximum focal length of telescope: 540 mmSCOPE OF DELIVERYLS60FHa solar filterB600 Blocking Filter (for 1.25" focuser) in star-diagonalTransport caseInstruction manual

100mm H-alpha solar filter system with B600 blocking filter, for front mounting at telescopes with 2" focuser, and up to 540mm focal length.The LS100FHa H-alpha Etalon filter system with 100mm aperture for use on any refractor and many other telescopes. Because the LS100FHa has an estimated bandwidth of <0.7 Angstrom it is capable to providing high contrast views of both solar surface and edge detail (prominences).The system includes the B600 blocking filter, which is usable for telescopes up to 540mm focal length. Larger blocking filters suitable for longer focal length are also optional available. The blocking filter is installed in a 90° star diagonal for 2" focuser. This diagonal is equipped with a reception for 1.25" eyepieces and a T2 camera connection.Adding an additional available double-stack Etalon system will reduce the bandwidth to ~<0.5 Angstrom.FEATURESAperture: 100 mmBandwidth: <0.7 AngstromTuning: tiltable EtalonHousing diameter: 162 mmLength: 101 mmWeight: 2.75 kgFront thread: M120x1.5 female threadRear thread: M120x1.5 male threadBlocking filter: B600 in diagonal for 2" focuserMaximum focal length of telescope: 540 mmSCOPE OF DELIVERYLS100FHa solar filterB600 Blocking Filter (for 2" focuser) in star-diagonalTransport caseInstruction manual

Set of 5 extension tubes with T2 thread on both sides for exact distances and secure hold of cameras for astrophotography. Also comes with SC to T2 thread adapter.In astrophotography, most cameras are connected to a telescope via a T2 thread (M42x0.75), the most popular international standard. However, in many cases, T2 and T2-ring adapters for connecting telescope focusers to a camera are not sufficient, as specific distances must also be observed. This is especially important when using correctors, reducers or flatteners. This extension tube set, which consists of 5 mm, 7.5 mm, 10 mm, 15 mm and 30 mm tubes, will allow you to obtain almost any distance using the corresponding combination. Each tube has a T2 interior thread on one side and a T2 exterior thread on the other side.Most telescopes either include a T2 thread adapter, or the eyepiece can be used with a simple T2 thread adapter with a 2” plug-in diameter (item no. 0510365).However, Maksutov-Cassegrain, Schmidt-Cassegrain, ACF or Ritchey–Chrétien telescopes may use a so-called SC thread. To allow you to use this extension tube set with these telescopes, the set also includes an SD to T2 thread adapter.FEATURES5 T2 tubes with lengths from 5 mm to 30 mmCombination of tubes allows you to obtain distances of 5 mm to 67.5 mmFor exact camera distances in astrophotographyDELIVERY CONTENT5x T2 extension tubes (5/7.5/10/15/30 mm)1x SC to T2 thread adapter

You see better with two eyesThe BRESSER BinoViewer Deluxe makes it possible to observe astronomical objects in a relaxed way with both eyes and with considerably more detail than using one eye. The images created of the moon, planets and globular clusters are particularly impressive. But also with deep-sky objects such as the Orion Nebula the detection of details is much easier. At the same time this binoviewer is very easy to handle. Thanks to the newly patented optical system you can get into focus with any telescope. All you need is a pair of identical eyepieces to enjoy this dramatic and immersive viewing experience.How to use the BinoViewer? Since the BRESSER BinoViewer Deluxe does not require an additional light path (back focus), it can be used with any telescope - including Newtonians and short focus refracting telescopes, which traditionally suffered when using standard binoviewers. No light path corrector or similar accessory is necessary. If a standard 1.25'' eyepiece can be focused, the binoviewer will also work. The eyepiece focal length and field of view size of the eyepieces used are fully retained. As with binoculars one eyepiece is focused first using the telescope focuser. Then the second eyepiece can be brought into focus using the helical focuser on the binoviewer. The required interpupillary distance is then elegantly adjusted to a range of 58–74mm with the help of a linear sliding mechanism, with graduated marker, to help you find your ideal interocular setting quickly.  Self-centring helical eyepiece grips, rather than side-mounted thumbscrew eyepiece retainers are used, decreasing the chance of offsetting collimation of both eyepiece to each other.  The fact that this design of binoviewer uses a well-engineered linear slide mechanism to adjust interpupillary distance, rather than a cheaper-to-produce traditional hinged design also helps retention of collimation.Which objects can be observed with this accessory?Actually, all objects that were previously observed with the telescope in question, but only monocularly with one eye. Because there is no magnification factor at the binoviewer, even low magnifications can be achieved. This makes not only the moon, planets and globular clusters, but also the brighter deep-sky objects very interesting observation targets. The use of two eyes leads to a more relaxed view than using one eye alone.  Although true depth of field viewing at infinity is a little beyond most telescopes and binoviewers, users will note how the human brain attempts to impose depth of field ("3d-like") effects on stereo views through binoviewers.  The biggest difference that most observers comment upon when comparing views through binoviewers like these, as opposed to single monocular eyepiece views, is the extra detail that can be seen in most observable targets.  Relaxed viewing and extra detail in objects are the two main benefits of binoviewing, which the BRESSER Bino Viewer Deluxe 1.25'' delivers in abundance.Also ideal as an accessory for solar telescopesA very special application is the use of the BRESSER BinoViewer Deluxe in combination with all solar telescopes. The spherical shape of the sun with all its surface details is shown very impressively.  The depth of field effects of seeing filaments silhouetted against the solar surface are particularly enjoyable to observe.Important note: Do not use the BRESSER Binoviwer Deluxe without a suitable solar telescope or a safe solar filter in front of the telescopes objective lens . Otherwise, there is an acute risk of going blind.High-quality mechanics and materialsThe entire BRESSER BinoViewer Deluxe is made of high-quality materials. Except for the outer plastic covers all components are made of anodised aluminium. Particularly remarkable are the low-backlash sliding mechanism for adjusting the interpupillary distance and the precise rotary clamping of both eyepiece adapters. The wide clamping surface holds the eyepieces in place securely and also centres them automatically on the optical axis. The one-sided dioptric adjustment has a backlash-free helical drive and enables the finest corrections. For safe transport a high-quality hard-shell transport case is included in the scope of delivery.Which eyepieces can be used?All eyepieces with a 1.25'' barrel and a field stop of up to 22mm. Depending on the interpupillary distance the outer diameter of the eyepiece housing should not exceed a value of approximately 50 mm.Filter thread 1.25'' availableNo 2nd filter sets are necessary to operate the BRESSER Binocular Approach Deluxe. The desired colour or nebula filter can be screwed directly into the 1.25'' nosepiece. in this configuration, when changing the eyepieces to affect a change in magnification, no swapping of filters is necessary.  Unique mirror-lens system with Ohara (Japan) lanthanum glass material The BRESSER Binocular Viewer Deluxe is equipped with a unique mirror-lens system. This has the advantage of higher light transmission and less color aberration. The resulting image is simply brighter and sharper. To achieve this the exclusive Ohara (Japan) lanthanum glass material has been used and in addition all optical surfaces are equipped with a full multi-layer broadband coating. Finally the beam-splitting mirror has a 99% dielectric coating and completes the excellent optical design.FEATURESEnables binocular observations with all telescopesRelaxed and comfortable viewingThree-dimensional viewing experienceSuitable for all telescopes with 1.25'' eyepiece connectionNo additional light path requiredNo magnification factor at the binocular attachmentEven low magnifications with large fields of view are achievableFor observing moon, planets and deep sky objectsPrecise and robust mechanicsSliding mechanism to adjust the interpupillary distanceDioptric compensation via fine helical driveWide eyepiece rotation clamp with automatic centeringFilter thread 1.25'' (M28.5 x 0.6mm) availableLens and mirror design made of finest Ohara (Japan) lanthanum glass materialAdvanced broadband multilayer coating on all optical surfaces99 % dielectric-coated beam-splitting mirrorHigh-quality hard-shell carrying case includedWHAT'S INCLUDEDBino Viewer DeluxeDust capsCarrying case 

Double-stack filter for LS40THa telescopes. The bandwidth of H-alpha systems can be reduced by so-called "double-stacking". A smaller bandwidth provides much more contrast at the solar surface, thereby many more details will become visible. Double-stacking with a bandwidth of only <0.55 Angstrom is also possible at the LS40THa telescopes. Therefore Lunt Solar Systems has especially designed this LS40FHa double-stack filter in compact housing. FEATURES Aperture: 40 mm Bandwidth: <0.55 Angstrom Tuning: mechanical tilt-tuning Housing diameter: 70mm Length: 60mm Weight: 0,3kg only usable together with a LS40THa telescope! SCOPE OF DELIVERY LS40THa H-alpha double-stack filter Instruction manual