LUNT LS6CaKMDd2 Ca-K filter in 90° star diagonal

​Modular designed multipurpose telescope, both for observing the sun in the H-alpha wavelength, as well as for night sky observations. Easy conversion between the different applications with a few simple steps. 2-lens ED Apo telescope with FPL-53 glass, 80mm aperture and 560mm focal length - very good image quality for H-Alpha solar observation and also for observing the starry sky at night.With innovative air pressure tuning system, good 2 inch (50.8mm) R&P focuser, and B1200 blocking filter.Solar observing in H-alpha:The LS80MT/B1200 is a complete telescope for observing the sun in H-alpha light, with 80mm free aperture (no central obstruction) and 560mm focal length. The H-alpha wavelength is the most impressive way to observe the sun, showing protuberances at the sun's edge, filaments and flares on the surface, and much more. An internal Etalon filter achieves a bandwidth of <0.7 Angstrom with the innovative air pressure tuning system Pressure-Tuner. Tuning is done by slightly changing the air pressure in a pressure chamber inside the telescope. This changes the refractive index of the air, making it easy to tune to the H-alpha line. The pressure tuner guarantees a homogeneous image, without central obstruction, and a permanently protected Etalon without erosion. A set of collimating lenses installed in the telescope ensures best performance.Fine adjustment is achieved with a solid 2 inch R&P focuser with 10:1 reduction.Blocking-filter is the B1200. The B1200 is good for visual solar observing. Also solar imaging is possible by cameras with small sensor chip. We recommend a LS80MT with B1800 blocking-filter by using cameras with large sized sensor chips.The star diagonal in which the blocking filter is installed, is equipped as standard for 1.25 inch eyepieces and with a T2 camera connection.Observing the starry night sky:The H-Alpha Etalon system can be removed from the telescope in a few easy steps thanks to its modular design. With the additionally available conversion kit (item number 0551330) the 2-lens ED Apo refractor can then be used as a normal telescope with 80mm aperture and 560mm focal length for observation and photography of the night sky. The FPL-53 doublet lens offers an low colour aberration image. Common 2 inch star diagonals can be used at the high quality R&P focuser of the conversion kit 0551330.Please note that the optionally available conversion kit 0551330 is absolutely necessary if the telescope should be used at night.More applications:With additionally available accessories the LS80MT offers even more possibilities!- Double-StackThe LS80MT telescope can optionally be upgraded with the additionally available double-stack module DSII/SFPT (item number 0551395). The DSII system is a internal double-stack module. Thereby a bandwidth of <0.5 Angstrom is achieved for H-alpha solar observation. Therefore much more details on the solar surface will become visible.- Solar observing in White-LightIf the H-alpha unit has been removed, of course either a sun filter to be installed in front of the objective, or a Herschel-wedge at the focuser can be used to observe the sunspots in White-Light.- Solar observing in Ca-K wavelengthCertainly, the Ca-K filter modules from Lunt Solar Systems can also be used at the LS80MT to observe and photograph super-granulation and other effects visible in this wavelength on the sun.This makes the LS80MT a completely universal usable ED Apo telescope of very good quality!FEATURES2-lens ED APO refractor, FPL-53Aperture: 80mm (no central obstruction)Focal length: 560mmBandwidth: internal Etalon with <0.7 AngstromTuning: air pressure tuning system Pressure-TunerBlocking filter: B1200 with 1.25" and T2 connectionFocuser: R&P with 10:1 reductionTwo tube-ring with handleSol-Searcher installed inside handleDovetail bar at GP-level for astronomical mountsWeight: 4.95kgLength with blocking filter and dew-shield: 62cmLength without blocking filter and removed dew-shield: 50cmSCOPE OF DELIVERYLS80MT Multipurpose TelescopePressure-TunerB1200 blocking filter in star-diagonal housing2 inch R&P focuser with 10:1 reductionTube rings with dovetail bar and sol-searcherTransport case (78x33x23cm)Instruction manualConversion kit for observation of the starry night sky (0551330) not included!

The three-lens design of the EXPLORE SCIENTIFIC ED-Apochromats provides everything an amateur astronomer desires - at a reasonable price. The construction with Hoya FCD-1 ED glass has two air spaces and provides a level of correction so superior to the two-lens constructions, that are common in this price class, that you will see the difference immediately. This excellent optical performance teams up with a high precision mechanics - the result is a telescope on a level that is setting a new standard in it´s price class. Astrophotographers will love this telescope - a optional field flattner is available and makes the telescope perfect even for cameras with a large chip format.These very popular EXPLORE SCIENTIFIC Triplet ED APO Refractors we do offer in 3 different product lines:Essential Line: HOYA FCD-1 Glass lens, AL-Tube, 2.0" Rack&Pinion Focusser with 1:10, 2.0" Star Diagonal 99% Reflectivity (see Part No. 0112084(AL), 0112106(AL), 0112132(AL)), 0112155(CF + 3"FT)) Professional Line: HOYA FCD-100 Glas lens, AL/CF-Tube, 2.5" HEXAFOC Focusser with 1:10, 2.0" Star Diagonal 99% Reflectivity (see Part No. 0112086(AL), 0112108(AL), 0112109(CF), 0112134(AL), 0112135(CF))High-End Line: OHARA FPL-53 Glass lens, Carbon(CF) Tube, 3.0" Feather-Touch Focusser with 1:10, 2.0" Star Diagonal 99% Reflectivity (see Part No. 0112165(CF))FEATURESthree lens air-spaced ED-apochromatHoya FCD01-ED glasspolystrehl of above 0.9weight: 2,6kgbackfocus: 165mm above 2" adaptorSCOPE OF DELIVERYOptics with dovetail plate and finder slot 2" Star Diagonal 99% reflectivityDust caps for front-lens and focuser

Powerful mobile power station from BRESSER Never lose power on the go again with this 600 Watt mobile power bank from BRESSER. Whether you’re camping, working in the garden or experiencing a power cut at home, the numerous connection options will allow you to safely charge or power almost all common electrical devices. From laptops to musical instruments, the high-quality 230-V/600-W output with pure sine wave can be used to power sensitive devices thanks to the powerful built-in 576-Wh 40-Ah/14.4-V lithium-ion battery. Unlike power generators with combustion engines, the portable power station offers a quiet, environmentally friendly solution. And with the optional solar panel (not included), you can even harness the power of the sun. The DC input socket can be used for direct charging via an AC adapter or solar panel. Connection options The BRESSER power station can be used to simultaneously charge up to four mobile devices via USB, such as phones, MP3 players, games consoles, cameras, and drones. The device is equipped with two USB-C ports and two USB-A fast charging ports that support Qualcomm Quick Charge 3.0. You can also power up to four 12 V devices with a total power consumption of 10 A via the direct car cigarette lighter socket and the three DC 2.1/5.5-mm sockets. The power station comes with two 5.5/2.1-mm coaxial connector to cigarette lighter adapters, which can be used to connect car/camping devices such as cool boxes, water pumps, mini compressors, and air pumps directly or in parallel. The device is also equipped with two sockets with 230 V and 600 W total continuous output, which is ideal for connecting laptop/tablet/smartphone chargers, cool boxes, and musical instruments, or other electrical devices in this power class. Powerful built-in lithium-ion battery The powerful 576-Wh 40-Ah/14.4-V lithium-ion battery stores energy reliably and can be charged in just 6 hours with the supplied 230 V charger or 12 hours with the supplied 12 V car battery charging cable. In addition, thanks to the built-in solar charging regulator, you can also charge the power station directly via a suitable solar panel (not included). A clear display shows you all the information you need, including the battery charge level, battery charging progress, current consumption and charging power in watts, and the remaining operating time. Operating times with application examples How many hours will the power station power your devices for? You can work out the approximate operating time using the following formula: (Approx.) duration = 576 Wh power station battery x 0.85 / device input power in Watts. Example: Laptop with 45 W input power: 576 Wh x 0.85 / 45 W = operating time in hours; 576 x 0.85 / 45 = approx. operating time of 11 hours. 5 W LED light: approx. 98 hours 10 W LED light: approx. 49 hours 30 W camping cool box: approx. 16 hours 45 W notebook: approx. 11 hours 60 W television: approx. 8 hours Smartphone: 60 full charges Tablet: 35 full charges Camera: 60 full charges Laptop: 6 full charges Comprehensive protection mechanism for all outputs: The power station is protected against short circuits, overvoltage, overcharging and deep discharge of the battery, and overheating. FEATURES Mobile power station with pure sine wave Standalone power supply for outdoor, leisure, and professional use For charging and powering a wide range of electronic devices Power or charge up to 10 devices simultaneously Pure sine wave for both 230 V outputs Displays the battery charge level and output switching status Includes numerous connection options and adapters Environmentally friendly and quiet alternative to generators Convenient carrying handle with non-slip rubber coating Powerful 576 Wh lithium-ion battery Connections: 2x USB-A fast charging ports that support Qualcomm Quick Charge 3.0 2x USB-C, 5–20 V/5.0 A (for latest-generation smartphones and tablets) 3x 12 V DC out 5.5/2.1 mm coaxial connector + 1x cigarette lighter socket 2x 230 V AC out (with total 600 W continuous output, short-term peak of 1200 W [1 s]) Input charging socket: 5–24.5 V/2–5 A (via mains or solar panel) Charging time from 0–100% approx. 6 hours via mains Built-in light: Power: 11 W/880~1320 lm; continuous illumination for up to 52 hours Temperature range: -10°C to +40°C Charging cycles: Up to 800 Dimensions: 25.8 x 21.2 x 24.9 cm / Weight: 6.1 kg SCOPE OF DELIVERY 1x Portable power station 1x power adapter, 24.5 V/4 A 1x Euro mains cable, C7 1x UK mains cable, C7 1x charging cable for cigarette lighter, 12 V 2x UK plug adapter for 230 V connection 2x adapter for cigarette lighter, 5.5/2.1 mm 1x instruction manual

Ultra Light Dobsonian 500mm GENERATION II - telescope mechanics handcrafted in HUNGARY and GERMANY No telescope type has influenced amateur astronomy as radically as the dobsonian telescope. Before the introduction of this telescope type by John Dobson the vast majority of amateur telescopes were small inadequate refractors on shaky mounts - just good enough to show the polar regions on mars or the rings of Saturn. Bigger telescopes, like the Schmidt-Cassegrain telescopes, were restricted to the relatively small group of amateurs that could afford them.The brilliant combination of simple - but effective - mechanics and the largest aperture available led to a worldwide triumph of this concept. No other telescope type offers you so much light for your money as a good dobson. We have taken the motto held together by gravity and driven by yoghurt power and offer a modern version of the classic - designed by amateur astronomers for amateur astronomers. Despite its large aperture the telescope can be transported easily even in small cars and is assembled within minutes without tools. The construction was optimized for maximum rigidity with a minimum of mass. The combination of big altitude wheels and a optimized aluminium-sandwich construction allows for small movements even at high magnifications. The focus position is already positioned to accept our coma-corrector (part No. 0510330) . The ideal workhorse for the deep-sky enthusiast. A telescope with 500mm aperture gathers more than 5100-times more light than the naked eye. Details on planetary surfaces stand out even to unexperienced observers, and countless deep-sky objects show details and some color. Bright globular clusters are resolved down to the core and the view of the lunar terminator will provide a unforgettable experience. The fast 20’’ f3.6 main mirror as well as the large 120mm secondary mirror are made of high quality quartz material, so the cooling time is reduced to a minimum and the Dobson is quickly ready for use. Every main mirror is delivered with an individual optical test certificate, which guarantees the highest capacity. A laser engraved center mark of the main mirror allows easy adjustment. The optical surface has a high-quality aluminum silvering with 94% reflectivity and an extremely resistant quartz protection layer. The mirror overcomes frequently occurring dew fogging and cleanups without any damages and guarantees a long service life. A complete redesign of this Dobson was necessary to ensure the significantly increased requirements to stiffness and load bearing capacity of the optical components. All connections of the tube structure were made in the TIG welding process and no rivets and screws were used. This has made it possible for us to produce this 20’’ light weight Dobson so unbelievably stiff in spite of the low weight - a noticeably good quality which is searching for its match. The production of almost all mechanical components is carried out by our partners in Hungary and the final assembly of the optics and subsequent quality control takes place in Rhede, Germany. The equipment details of the smaller Dobson models, which have been popular for years, have been taken over and even extended considerably. First of all, of course, the very good decomposability and transportability should be mentioned. Set-up and dismantling can be carried out without tools. The main and secondary mirrors are adjustable during the observation and only two adjusting screws have to be moved. Thanks to the use of precision ball-heads in the main mirror cell and a precision hinge for secondary mirror suppport, the adjustment is absolutely easy and guarantees excellent stability. All connecting parts of the tube trusses now consist of CNC machined aluminum and are attached by stainless steel dowel screws. The secondary mirror can now also be adjusted by the adjusting screws in the direction of the optical axis. The tried and tested 2.5’’ HEXAFOC focuser with 1:10 fine adjustment has been used for years - this allows vignetting-free observation despite the fast aperture ratio. A second 40° displaced installed mounting plate with a viewfinder shoe allows the rotation of the tube top in combination with a favorable position of the viewfinder tube or the mounting of an additional TELRAD viewfinder. The 6 supporting feet underneath the rockerbox offer a perfect stability and guarantee a smooth tracking in azimuth. Four smaller fans are installed in the side of the mirror box as well as a large fan is installed under the main mirror. This allows an even quicker adaptation to the ambient temperature and reduces the tube seeing (boundary layer removal). The lateral altitude wheels can now be stowed comfortably in the foam layers of the mirror box. Last but not least another gimmick: The optical tube and the mirror cell are designed to use also on heavy equatorial mounts. Dimensions for mobile use: DIMS total: 680x680x1790mm; Rockerbox 678mmx678mmx347mm; Mirrorbox 590mmx590mmx361mm; Trusses approx. 1084mm; Truss diameter: 25mm; Eyepiece height while pointing at zenith approximately 1,63m; 20’’ Total net weight: 53 kg; 20’’ Mirror Box + Altitude wheels: 35,8kg; 20’’ Secondary Cage: 3,8kg; Rockerbox: 10,6 kg; 20’’ 4 Truss pairs: 2,8kg; 20’’ Primary mirror: 20kg SPECIFICATIONS Truss-Dobsonian telescope in full Aluminium construction Handcrafted in HUNGARY and GERMANY Fast 20’’ f3.6 optics with 1800mm focal length Large 120mm secondary mirror (short axis) Quarz primary- and secondary mirror set Laser engraved central mark on primary mirror Eyepiece height while pointing at zenith approximately 1,63m Full welded rigid telescope structure - no rivets and no screws Telescope tube and rockerbox powder-coated Collimation while observing with the delivered tooling DeLuxe 2,5’’ HEXAFOC focuser with 1:10 gear-reduction 8x50 finder scope with red illuminated reticle Slider bearings made from TEFLON und GRP for smooth and precise movement Improved primary mirror cell with completely redesigned mechanics High precision hinge system for secondary mirror holder Secondary mirror holder with adjustment mechnism along the optical axis 6 larger feet to improve stability Counter-weights (4 x 1.0 kg) included 2 universal finder slots to enable an easy finder position Quick-lock fasteners with new springloaded design for comfortable use Large powder-coated yellow altitude wheels for smooth tracking Altitude wheels can be stored in the mirror box 5 cooling fans are speeding up the cool-down time SCOPE OF DELIVERY Truss Dobsonian Telescope Individual optical test report for primary mirror 8x50 finder with red illuminated reticle Stray light shield for secondary cage Primary mirror collimation tool Battery compartment with bag for fans Extension tube for focuser Reducer 2’’/1.25’’ Manual SHIPPING DIMENSION - truck shipment only in order to guarantee a save transport: BOX1: 600x600x380 approx. 44 kg ; BOX2: 690x690x330 approx. 17 kg ; BOX3: 150x150x1150 approx. 4 kg

Adapter T2 to 2", takes for example 2" eyepieces to Lunt Solar Systems blocking-filters.This adapter offers a T2 female thread at the telescope-side, and a 2" connection at the eyepiece-side.For example you want to use your 2" eyepieces at Lunt Solar Systems telescopes or filters? All you need is this adapter. Simply remove the 1.25" eyepiece tube from your blocking-filter, and thread on this 2" adapter. It takes T2 threading to a 2" eyepiece tube.You can use 2" eyepieces with this adapter at:• LUNT H-alpha telescopes (not at LS35THa!)• the blocking-filters of LUNT H-alpha filter systems• LUNT Ca-K modules• all telescopes/adapter with T2 male threadTechnical data:• Thread at telescope-side: T2 female thread• Eyepiece connection: 2"Delivered by order:• Adapter T2 to 2"(Blocking Filter not included)