Skip to main content Skip to search Skip to main navigation

NATIONAL GEOGRAPHIC Wi-Fi Colour Weather Station with 7-in-1 Sensor

Download
9080600 Firmware Version V2.06_en
pdf 0.41 MB
Download
9080600 Firmware Version V2.06_de
pdf 0.35 MB

Help & Service for your product

Here you will find quick help, answers to frequently asked questions, and direct access to support.

Service Portal

Please use our product help search to find answers to your questions. Simply enter the article number or EAN to open the appropriate help page directly.

Service Portal

Sensor Form

In rare cases, a sensor may not work correctly. Using our form, you can quickly send your request to our service team and we will take care of a straightforward solution.

Sensor Form

Ratgeber & Tipps

FAQ - Frequently Asked Questions

The symbol flashes when the air pressure drops sharply within a short period of time. This indicates that a storm or strong winds are very likely approaching. As soon as the air pressure stabilizes, the flashing will stop automatically – it therefore serves as a storm warning.
Please proceed as follows:
  1. Remove all batteries from the base station and the outdoor sensor.
  2. Wait at least 3–10 minutes.
  3. Insert the batteries into the base station.
  4. Once the indoor temperature is displayed, insert the batteries into the outdoor sensor.
The signal should now be detected and the outdoor temperature displayed.

Tips:
  • If problems occur, replace all batteries with fresh, non-rechargeable brand batteries. Different battery types or charge levels may cause interference.
  • Do not place the base station near other electronic devices (this may interfere with reception).
  • If necessary, choose a different location for the base station.
If pressing the “DCF” button on the back does not help, reset the station:
  • Briefly press the reset button on the back with a pen
  • If necessary, place the station closer to a window, as reception inside buildings may be limited

Product and safety instructions


Manufacturer: 
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede

Contact: 
www.bresser.de


Warning notes
  • WARNING! Do not swallow the battery, risk of chemical burns. This product contains a button cell/button battery. If swallowed, it can cause severe internal chemical burns within just 2 hours and may lead to death. If the battery compartment cannot be securely closed, do not use the product and keep it away from children.
  • If you believe batteries may have been swallowed or are in any body part, seek immediate medical attention. When disposing of this product, make sure it is collected separately if required.
  • The AC/DC adapter serves as a disconnecting device. - The device’s AC/DC adapter should not be covered OR must be easily accessible during normal use. - To completely interrupt the power supply, the AC/DC adapter of the device must be disconnected from the network.
  • CAUTION - There is a risk of explosion if the battery is not replaced correctly. Replace only with the same or an equivalent type. The battery should not be exposed to extreme temperatures, low air pressure, or high altitudes during use, storage, or transport.
  • Replacing a battery with an incorrect type can lead to an explosion or leakage of flammable liquid or gas. Do not throw the battery into fire or a hot oven, or mechanically crush or cut it. This can lead to an explosion.
  • The presence of a battery in an environment with extremely high temperatures can cause an explosion or leakage of flammable liquids or gases. - A battery exposed to extremely low air pressure can explode, or there may be leakage of flammable liquids or gases.
Skip product gallery

Compatible Sensors

BRESSER Thermo-Hygro Sensor 7 Channel 868 MHz
Remote sensor for measuring of temperature and humidity. Seven channels settable. With extra long radio range of 150 meters on a radio frequency of 868 MHz. Good news for smart home owners: this sensor can be seamlessly integrated into the leading smart home system when paired with a compatible Tuya-enabled weather station.This device is compatible with weather stations with the following article numbers: 15659162691642116427164447002531700254170025717002582700258670026107002620700315070032007003210700322070032307003240700330070034007003500700351070035207003700700380070039007004406700630079025317902541790258079025817902585790258679032007903210790322079032307903300790350079035109080600908070090808007003100000000700311000000070036000000007003100CM30007003100GYE0007003100HZI0007003100QT50007003600CM30007003600GYE0007003600QT5000WSH4102WSX3001000000WSX3001CM3LC1WSX3001CM3LC2 Compatible with the following weather stations, but exclusively with firmware version V1.11 or higher (download available on the product page of the BRESSER homepage): 700258070025817002585WSX1001000000WSX1001CM3LC1WSX1001CM3LC2 FEATURES Temperature measuring Humidity measuring 7 channels settable RC frequency: 868 MHz Extra long radio range of 150 meters! Suitable for smarthome systems by Tuya Powered by battery; 2x AA (LR6) (not included!) SCOPE OF DELIVERY Remote sensor

Available

€34.95*
BRESSER Spa and Pool thermometer
Want to cool off in your pool? This wireless and floating pool thermometer from BRESSER will tell you whether the water is at an optimal temperature. Measurements are shown on the built-in LCD display. You can also connect the pool thermometer to your BRESSER weather centre so that you can check the pool temperature from the comfort of your own home. This device is compatible with weather stations with the following article numbers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loating pool sensor for measuring the water temperature LCD display for displaying the temperature (°C/°F) Wireless frequency: 868 MHz Wireless transmission range of up to 30 m to optional base station 7 available channels Waterproof (IPX7) Powered by 2x AA batteries (not included) DELIVERY CONTENT Pool thermometer Instruction manual

Available

€39.00*
BRESSER 7-in-1 Outdoor Sensor
This high-quality replacement part will quickly get your weather station back in working order.IMPORTANT: Will this part fit your weather station? This replacement part is only compatible with certain weather station models. Below you'll find an overview of all compatible devices. Simply compare the article number on your device with the models shown to ensure the replacement part is suitable. Compatible with the following devices:151971519815199156601642116427164441651170025417002582700258670026107002620700330070033607003400700350070035107004406780001179025417902586790323079033007903500790351090806007003100000000700311000000070036000000007003100CM30007003100GYE0007003100HZI0007003100QT50007003600CM30007003600GYE0007003600QT5000WSX3001000000WSX3001CM3LC1WSX3001CM3LC2FEATURES Replacement wireless sensor, transmits data to the Wi-Fi Comfort weather centre Measures the outdoor temperature and outdoor humidity Measures the wind speed, wind direction and rainfall Measures the UV level and light intensity Transmission range of up to 150 metres Place in an unobstructed location in order to obtain accurate sunlight and rain data Power supply: 3x AA batteries (not included) SCOPE OF DELIVERY Wireless sensor Mounting materials Base station is not included! Instruction manual

Available

€119.00*
BRESSER 7-in-1 Outdoor Sensor with Adjustable Solar Panel
This high-quality replacement part will quickly get your weather station back in working order.IMPORTANT: Will this part fit your weather station? This replacement part is only compatible with certain weather station models. Below you'll find an overview of all compatible devices. Simply compare the article number on your device with the models shown to ensure the replacement part is suitable. Compatible with the following devices:151971519815199156601626916421164271644416511700254170025827002586700261070026207003200700321070032207003230700324070033007003360700340070035007003510700370070038007003900700440679025417902586790320079032107903220790323079033007903500790351090806009080700WSX3001000000WSX3001CM3LC1WSX3001CM3LC2FEATURES Powered via a large movable solar panel In case of insufficient sunlight operation via 3x AA batteries (not included) Measures the temperature and humidity Measures the wind speed, wind direction and rainfall Measures the UV level and light intensityRange: up to 150 m Dimensions: 390 x 174 x 465 mm SCOPE OF DELIVERY Solar-powered outdoor sensor Mounting materials Base station is not included! Instruction manual

Available

€169.00*
BRESSER 7-in-1 Outdoor Sensor with Solar-Assisted Battery Operation
This high-quality replacement part will quickly get your weather station back in working order.IMPORTANT: Will this part fit your weather station? This replacement part is only compatible with certain weather station models. Below you'll find an overview of all compatible devices. Simply compare the article number on your device with the models shown to ensure the replacement part is suitable. Compatible with the following devices:151971519815199156601626916421164271644416511700254170025827002586700261070026207003200700321070032207003230700324070033007003350700336070034007003500700351070037007003800700390070044067902541790258679032007903210790322079032307903300790335079035007903510908060090807007003100000000700311000000070036000000007003100CM30007003100GYE0007003100HZI0007003100QT50007003600CM30007003600GYE0007003600QT5000WSX3001000000WSX3001CM3LC1WSX3001CM3LC2FEATURES Measures the temperature and humidity Measures the wind speed, wind direction and rainfall Measures the UV level and light intensity Solar power for longer battery lifespan Range: up to 150 m Power supply: 3x AA batteries (not included) Dimensions: 420 x 170 x 213 mm SCOPE OF DELIVERY Wireless sensor with installation material Base station not included! Instruction manual

Available

€149.00*
BRESSER Soil Temperature and Moisture Meter
This additional sensor allows you to take two additional practical measurements with your BRESSER weather station. In addition to the soil temperature, the sensor can also measure the soil moisture – ideal for plant lovers and gardeners. Measurements are sent to the base station at 60 second intervals. The soil moisture meter can be positioned up to 150 metres away from the base station. There are also 7 different channels to choose from. And thanks to the weatherproof housing, the wireless sensor is able to withstand adverse weather conditions. This device is compatible with weather stations with the following article numbers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ireless and compact soil sensor Measures the soil humidity Measures the soil temperature Transmission interval: 60 seconds Extra-long range of up to 150 metres Cable length: approx. 140 cm 7 available channels LED indicator for data transmission Weatherproof housing Battery-operated with 2x AA batteries (not included) DELIVERY CONTENT Soil sensor Instruction manual

Available

€39.00*
BRESSER Precision Thermo-Hygro Sensor
This high-performance outdoor temperature and humidity sensor is the perfect extension for your BRESSER weather station. The sensor transmits measurement data over an ultra-long wireless range of to 150 metres at a frequency of 868 MHz. There are seven different wireless channels available to choose from. Thanks to the built-in display, you can also use the precision thermo-hygro sensor as a standalone solution without a weather centre. This device is compatible with weather stations with the following article numbers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emperature measurement function Humidity measurement function 7 available channels Built-in display, can also be used as a standalone solution without a weather centre Temperature range: -20 ~ 60℃ Wireless frequency: 868 MHz Ultra-long range of up to 150 m Battery-operated with 2x AA batteries (not included) DELIVERY CONTENT Outdoor sensor Instruction manual

Available

€34.95*
Skip product gallery

Compatible Base Stations

BRESSER Additional / Spare Base Station for Weather Station 15198
NOTE: This base station is compatible with weather stations with the following item numbers. You’ll find your weather station’s item number printed on the back of the base unit. 1519615197151987002541700258270025867002620 7003100CM3000 7003100GYE000 7003100HZI000 7003100QT50007003200700321070032207003230700324070033007003360700350070035107003520 7003600CM3000 7003600GYE000 7003600QT500070037007003800700390070063009080600908070070031000000007003600000000 WSH4102 WSX3001 WSX3001CM3LC1 WSX3001CM3LC2 WSX3001000000Fancy sharing your personally recorded weather data with your neighbours? Or do you need a replacement base station because yours didn’t quite survive the last house move – or the children’s enthusiastic games of tag? Whether you’re upgrading your setup or replacing a unit, this base station brings all the features of your existing weather station straight back to your screen in no time. FEATURES BASE STATION 24-hour and 14-day local forecasts with temperature highs, lows and rain probability (via ProWeatherLife server) Large 10-inch (25.4 cm) colour display Wi-Fi connection for publishing data to ProWeatherLive and Weathercloud Internet-based visibility and cloud cover Precise measurements from the outdoor sensor (not included) Indoor temperature and humidity with comfort indicator Air pressure display Heat stress index Beaufort scale for wind strength Weather indices: feels-like temperature, heat index, dew point, wind chill Max/min memory Weather alerts via ProWeatherLive Time, date, weekday and moon phase Sunrise/sunset and moonrise/moonset times Backlight with automatic dimmer WSLink app for easy Wi-Fi setup, data calibration and firmware updates Power supply: mains adapter (included), 1x CR2032 backup battery (not included) SCOPE OF DELIVERY Base station Stand Power adapter

Available

€179.00*
BRESSER Additional / Replacement Base Station for Weather Station 7003300 from LOT No. 1605517 onwards
NOTE: This base station is compatible with BRESSER weather stations with item no. 7003300 AND LOT no. 1605517 and higher. You will find the item number and LOT number of your weather station printed on the back of the base station.Want to share your weather data with your immediate neighbours? Or do you need a replacement base station because your device didn’t survive the last house move or a wild game of tag with the kids? Whether as an extension or a spare part – get all the functions of your existing weather station with item number 7002530 back on screen in no time with this base station. FEATURES7.4-inch colour display for detailed time and weather information LC display contrast adjustment for different viewing angles Wi-Fi connection for publishing data on weather platforms such as AWEKAS, Weather Underground and Weathercloud Indoor temperature (°C/°F) and humidity with comfort indicator Display of outdoor temperature (°C/°F) and humidity UV index with UV level indicator Light intensity display Sunburn time display (min.) Wind speed display (gusts or average speed) Beaufort scale level (scale for classifying wind speed) Wind direction display (current and prevailing, based on 16 directions) Rainfall display (hourly, daily, weekly, monthly, total rainfall) Weather forecast (sunny, partly cloudy, cloudy, rainy, stormy, snowy) Air pressure display Feels-like outdoor temperature Weather index for dew point, wind chill factor and heat index Min./max. value memory (up to 24 hours) High/low value alarm with flashing symbol on the display Alarm clock with ice/frost warning Time (internet time synchronisation), date, weekday and moon phase Sunrise and sunset Weather data calibration 3 display brightness levels: High / Low / Off 7 languages for weekday (EN/ DE/ FR/ ES/ IT/ NL/ RU) Supports firmware updates Security type: supports WPA3 encryption Supports one 7-in-1 wireless professional sensor Supports up to 7 additional wireless sensors (7009999, SP60010000000, SM60020000000) Dimensions: 202 x 138 x 38 mm / Weight: 510 g Power supply: mains adapter (included) and 3x AAA backup batteries (not included) Mounting: wall-mounted or stand SCOPE OF DELIVERY Base station No outdoor sensor included! Instruction manual

Available

€149.00*
%
BRESSER Additional / Replacement Base Station for the WSX3001 Professional Wi-Fi Weather Station
Would you like to view your weather data in an additional room? Are you looking for a gift to enable your neighbours to monitor your local weather? Or maybe the base station from your BRESSER Professional Wi-Fi Weather Station didn’t survive your recent move or your child’s latest tantrum? Whether you’re looking for an extension or a replacement, this base station will allow you to access all of your measurements on the large 20 cm screen. In addition to displaying the data from your 7-in-1 sensor (not included), it can also show the readings from up to 7 compatible additional sensors (not included). Share your weather data worldwide The base station can also be connected to online platforms such as Wundergound or Weathercloud so that you can share and access your weather data online. And with the German-language portal AWEKAS, you can integrate your measurements into your smart home system (configuration instructions: https://www.awekas.at/for2/index.php?thread/17080-software-api-stations-api-beschreibung-beta/). Additional base station – monitor the indoor climate in another room If your existing base station is in the living room, you can place a second base station in the kitchen or your child’s bedroom to view your local weather data in an additional room. The base station features a built-in thermo-hygro sensor, which measures the ambient temperature and humidity and displays a smiley symbol to indicate the quality of the indoor climate. You can then take effective measures to prevent the risk of mould or dry air. The additional base station is also ideal as a bedside clock. It features a built-in backlight that can be dimmed or switched off completely to ensure you get a good night’s sleep. And so that you wake up on time, it also has a practical alarm with a snooze function, as well as a frost warning function that triggers that alarm 30 minutes earlier when the outdoor temperature drops below -3°C – plenty of time to ensure that you get to work or school safely. Access all the practical functions of your BRESSER Professional Wi-Fi weather station with this additional/replacement base station. FEATURES WiFi connection with internet time synchronisation and support for firmware updates Publish your weather data on Wunderground or Weathercloud Indoor temperature (°C/ °F) and humidity (%) Displays the outdoor temperature (°C/ °F) and humidity (%) Light intensity (Klux / Kfc / W/m²) Displays the current UV index, exposure level and recommended protection Displays the sunburn time (mins) based on the current UV level Wind direction and speed (m/s; km/h; Knoten; mph) Beaufort index (scale for measuring wind speed) Air pressure with 24-hour history (hPa/inHg/mmHg) Rainfall with history (day/week/month) Graphical weather forecast for next 12-24 hours Weather index (‘feels like’ function, dew point, heat index, wind chill factor) Trend indicator shows the weather trends for the next few minutes Visual comfort level indicator for room temperature and humidity Phases of the moon Sunrise and sunset times Alarm with snooze function (5 minutes) and ice/frost warning Weekday alarm Min./max. memory (up to 24 hours) LED backlight, amber-coloured Wall bracket and table stand Supports a 7-in-1 sensor and up to 7 indoor sensors (sensors are not included) Dimensions: 215 x 172 x 29 mm and weight: 639 g Power supply: Power adapter and 3x AAA batteries as backup batteries (batteries are not included) Integrated Wi-Fi transmission to AWEKAS Security protocol: supports WPA3 encryption for firmware version 1.09 and above DELIVERY CONTENT Base station with stand Power adapter Instruction manual

Available

€84.15* €99.00* (15% saved)
NATIONAL GEOGRAPHIC Additional / Replacement Base Station for Weather Station 9080600
NOTE: This base station is compatible with weather stations with the following item numbers. You’ll find your weather station’s item number printed on the back of the base unit. 7002541700258270025867002620700320070032107003220700323070032407003300700336070035007003510700370070038007003900700630090806009080700700310000000070036000000007003100CM30007003100GYE0007003100HZI0007003100QT50007003600CM30007003600GYE0007003600QT5000WSH4102WSX3001000000WSX3001CM3LC1WSX3001CM3LC2Fancy sharing your personally recorded weather data with your neighbours? Or do you need a replacement base station because yours didn’t quite survive the last house move – or the children’s enthusiastic games of tag? Whether you’re upgrading your setup or replacing a unit, this base station brings all the features of your existing weather station straight back to your screen in no time.FEATURES 5.7'' colour display for detailed time and weather information Wi-Fi connection with internet time synchronisation Receives weather data from the 7-in-1 professional sensor (not included) and from the wireless thermo-hygro sensor (not included) via 868 MHz Publish your local weather station data on platforms such as Weather Cloud Displays time, calendar, day of the week, and moon phase Alarm function Ice/frost warning Indoor temperature (°C / °F) and humidity with comfort indicator Outdoor temperature (°C / °F) and humidity display UV level and light intensity display Gust and average wind speed display Wind direction display (based on 16 compass points) Rainfall display (hourly, daily, weekly, monthly, total) Weather forecast (sunny, partly cloudy, cloudy, rainy, stormy, snowy) Air pressure Feels-like outdoor temperature Weather index including dew point, wind chill, and heat index Min./max. value memory (up to 24 hours) Alarm with LED indicator Weather calibration 3 display brightness levels: High / Low / Off 7 language options for the day of the week Supports firmware updates Security type: supports WPA3 encryption from firmware version 2.0 Supports a wireless 7-in-1 professional weather sensor (not included) Supports up to 7 additional wireless sensors (not included – item no.: 7009999) Easy setup and updates via WSLink app SCOPE OF DELIVERY Base station Power adapter No outdoor sensor included! Instruction manual

Available

€119.00*
BRESSER Additional / Spare Base Station for Weather Station 7002586
Get clarity on the current wind and weather: You have purchased the BRESSER WiFi ClearView Weather Station and now know your local wind speed, wind direction, humidity, temperature, precipitation values, as well as UV level and light intensity. But where should you put the base station? In the living room, your whole family will benefit from being able to glance quickly at the clear 21 cm TRUE BLACK colour display. But wouldn’t it also be great in the bedroom, so that as soon as you’ve switched off the alarm you’ll know whether blue sky and sunshine await? With this additional BRESSER base station, you don’t need to decide on just one room. Simply connect to your 7-in-1 external sensor and you have immediate access to your measured values in another room. You can count on the usual functions whenever you need them, including reliable local weather trend forecasts for the next 12 hours, displayed as graphics, so know when to organize a spontaneous BBQ. In the winter months, the frost alarm will alert you when the external temperature falls below -3 °C: Caution, risk of black ice! You can also see the date, day of the week, time and moon phases so you have an idea of the ‘signs of the times’. Plus, for a more long-term view, the memory function stores historical measured data from the past 24 hours. Time to give your BRESSER WiFi ClearView Weather Station a breath of fresh air Are there early signs of mould formation in your bathroom? Is the air in your children’s bedroom too dry because of the central heating? The additional BRESSER base station allows you to respond to unusual situations like these with utmost flexibility, as two stations mean two separate measured results for indoor temperature, humidity and air pressure. Position the device in a critical location and the integrated sensor will measure the current room temperature, humidity and air pressure at that location. A graphical room climate indicator will alert you when the air is optimal, too dry or too damp. In addition, you can also set an independent maximum/minimum value alarm with audible and light signal on the additional station itself. On the road often? In addition to the base station at home, you can use the WiFi function to access your measured data through weather portals such as AWEKAS any time, anywhere. Or, use AWEKAS to transmit your data to your Smart Home controller. Risk more than just a glance— this BRESSER base station displays reliable weather data from your 7-in-1 external sensor at an additional location. FEATURES 8.3” colour display (19.3 x 9.3 cm) for detailed time and weather information WiFi connection with internet time synchronisation Receives weather data from the 7-in-1 external sensor and from the optional wireless thermo-hygro sensors on 868 MHz Suitable for publication of data on platforms such as AWEKAS, Weather Underground and Weather Cloud Integrated sensor for indoor temperature (°C/°F), humidity and air pressure External temperature (°C/°F), humidity, wind direction, wind speed, UV level and light intensity Precise wind direction display (16 directions) Graphical weather trend display (sunny, partly cloudy, overcast, rain, storm, snow) Beaufort index display (scale for measuring wind speed) Precipitation quantity display (hourly, daily, weekly, monthly, total precipitation) Room climate indicator Weather index display for dewpoint, windchill factor and heat index Time, calendar, day of the week and moon phase display Alarm function with snooze button Ice/frost alarm Min./max. memory (up to 24 hours) Alarm with LED indicator 3 different display brightness levels High/Low/Off 7 languages for days of the week Firmware updates supported Supports up to 7 additional wireless sensors (optional) (item no. 7009999) Integrated WiFi transmission to AWEKAS SCOPE OF DELIVERY Base station Power adapter External sensor not included! Instruction manual

Available

€179.00*
BRESSER Additional / Spare Base Station for the Wi-Fi HD TFT Professional Weather Station 7003500
NOTE: This base station is compatible with weather stations with the following item numbers. You’ll find your weather station’s item number printed on the back of the base unit. 7002541700258270025867002620700320070032107003220700323070032407003300700336070035007003510700370070038007003900700630090806009080700700310000000070036000000007003100CM30007003100GYE0007003100HZI0007003100QT50007003600CM30007003600GYE0007003600QT5000WSH4102WSX3001000000WSX3001CM3LC1WSX3001CM3LC2Fancy sharing your personally recorded weather data with your neighbours? Or do you need a replacement base station because yours didn’t quite survive the last house move – or the children’s enthusiastic games of tag? Whether you’re upgrading your setup or replacing a unit, this base station brings all the features of your existing weather station straight back to your screen in no time.FEATURES 7-inch HD TFT display (17.8 cm) with versatile display modes Multi-channel overview showing live data from all wireless sensors Displays accurate readings from the 7-in-1 outdoor sensor (not included): (temperature, humidity, wind speed, wind direction, rainfall, UV level, light intensity) Seamless WLAN transmission to the AWEKAS weather portal (German interface) WLAN for sharing data on up to 3 platforms (Weather Underground, ProWeatherLive, Weathercloud, plus one additional) Graphical weather history (24 hours / 30 days) Historical data exportable to a USB drive (USB not included) Indoor temperature (°C/°F) and humidity, with trend tracking Beaufort scale for wind classification Detailed weather forecasts Air pressure monitoring Weather indices: feels-like temperature, dew point, wind chill, heat Daily and overall max/min memory Weather data calibration options Hi/Lo alarm settings for extreme conditions Custom labels for additional sensors Syncs with internet UTC time; time zone selection included Alarm clock with volume control and frost alert Time, calendar, weekday, and moon phase displays Sunrise/sunset and moonrise/moonset information Customisable display settings: light or dark mode Adjustable display brightness and contrast; day and night modes Supports six languages: English, German, French, Italian, Spanish, Dutch OTA and USB firmware updates Works with up to 7 sensors (not included, available separately) Mounting options: desktop stand or wall mounting Powered by mains adapter (included) and a CR2032 backup battery (not included) SCOPE OF DELIVERY Base station Power adapter No wireless sensorincluded! Instruction manual

Available

€229.00*
BRESSER Additional / Replacement Base Station for 7003510 MeteoChamp Weather Station
NOTE: This base station is compatible with weather stations with the following item numbers. You’ll find your weather station’s item number printed on the back of the base unit. 7002541700258270025867002620700320070032107003220700323070032407003300700336070035007003510700370070038007003900700630090806009080700700310000000070036000000007003100CM30007003100GYE0007003100HZI0007003100QT50007003600CM30007003600GYE0007003600QT5000WSH4102WSX3001000000WSX3001CM3LC1WSX3001CM3LC2Fancy sharing your personally recorded weather data with your neighbours? Or do you need a replacement base station because yours didn’t quite survive the last house move – or the children’s enthusiastic games of tag? Whether you’re upgrading your setup or replacing a unit, this base station brings all the features of your existing weather station straight back to your screen in no time.FEATURES Large 17.8 cm (7-inch) HD TFT colour display with various display modes Multi-channel overviews for displaying all live data from the wireless sensors Publish your weather data via Wi-Fi on up to 3 weather platforms (ProWeatherLive, Weather Underground, Weathercloud / 1 additional user-defined platform) Measures the indoor temperature and humidity Displays the graphical weather trend (last 24 hours) Weather forecast Beaufort scale display (scale for classifying the wind speed) Air pressure Weather index (perceived outdoor temperature, dewpoint, windchill factor and heat index) Maximum/minimum value memory Trend display for all temperature and humidity measurements Historical data log, exportable to USB drive (not included) Individually configurable weather alarm for different measurements Weather data calibration Synchronization with Internet UTC time with time zone selection Displays the time, calendar, day of the week, moon phase, sunrise/moonrise, sunset/moonset times Built-in alarm with ice/frost alarm Choose between dark or light display Adjustable display brightness and contrast, day, auto dim and night modes (on/off time can be set individually) 7 selectable display languages (EN, DE, FR, IT, ES, NL, CZE) Supports OTA firmware updates (Wi-Fi) and USB firmware updates (system) Supports up to 7 wireless sensors (not included, see accessories) Mounting options: Can be placed on tabletop with built-in stand or wall-mounted Power supply: Power adapter (included), CR2032 backup battery (not included) SCOPE OF DELIVERY Base station Power adapter External sensor not included! Instruction manual

Available

€329.00*
%
BRESSER Additional / Replacement Base Station for the 7003230 8-Day 4CAST XL Wi-Fi Weather Station
NOTE: This base station is compatible with weather stations with the following item numbers. You’ll find your weather station’s item number printed on the back of the base unit. 7002541700258270025867002620700320070032107003220700323070032407003300700336070035007003510700370070038007003900700630090806009080700700310000000070036000000007003100CM30007003100GYE0007003100HZI0007003100QT50007003600CM30007003600GYE0007003600QT5000WSH4102WSX3001000000WSX3001CM3LC1WSX3001CM3LC2Fancy sharing your personally recorded weather data with your neighbours? Or do you need a replacement base station because yours didn’t quite survive the last house move – or the children’s enthusiastic games of tag? Whether you’re upgrading your setup or replacing a unit, this base station brings all the features of your existing weather station straight back to your screen in no time.FEATURES 8-day weather forecast (today and 7 following days) Extra large 48.3 cm (19”) colour display with slim bezel Wide-angle display for easy reading of measurements when wall-mounted Wi-Fi connection for sharing local weather data on platforms such as ProWeatherLive, AWEKAS, Weather Underground or WeatherCloud Forecast for maximum and minimum temperature and chance of rainfall via the ProWeatherLive server Local visibility and cloud cover via ProWeatherLive server Indoor temperature (°C/°F) and humidity Displays precise measurement data from the 7-in-1 solar outdoor sensor (Outdoor temperature and humidity, wind speed, wind direction, precipitation, UV level, light intensity) Weather index (perceived outdoor temperature, dewpoint, windchill factor and heat index) Gusts and average wind speed Beaufort index (scale for measuring wind speed) Sunburn time (in mins) Air pressure Weather data calibration Weather alarm function via ProWeatherLive server Maximum/minimum value memory (daily/total) Backlight with automatic dimming function Displays the time, date, day of the week and moon phase Sun/moonrise, sun/moonset Alarm with ice/frost warning 7 languages for days of the week (EN, DE, FR, ES, IT, NL, RU) Supports firmware updates Supports up to 7 additional sensors (not included, see accessories) Mounting options: Can be placed on tabletop with built-in stand or wall-mounted Power supply: Mains plug (included), CR2032 back-up battery (not included) SCOPE OF DELIVERY Base station Power adapter External sensor not included! Instruction manual

Available

€359.00* €549.00* (34.61% saved)
%
BRESSER Additional / Spare Base Station for Weather Station 7003300 up to LOT No. 1599948
NOTE: This base station is compatible with weather stations with item no. 7003300 AND LOT no. up to 1599948. You can find the item and LOT number of your weather station printed on the back of the base station. Elegant and colourful: The additional base station allows you to view the data from your Wi-Fi comfort weather station in an additional room, such as a bedroom. The readings from your 7-in-1 outdoor sensor including outdoor temperature, humidity, wind speed, wind direction, precipitation, UV level and light intensity are transmitted wirelessly, giving your everything that you need to decide what to wear for the day. Built-in alarm The additional base station will help to give you a relaxing start to the day. It features a built-in alarm and a snooze button that silences the alarm to give you an extra few minutes in bed. The clock is synchronized automatically via the Internet to ensure that you won't be late to work. The modern LCD colour display can be viewed from any angle and shows you all relevant weather data including a weather forecast to help you decide what to wear for the day. The additional base station also displays a range of other useful data, including the perceived temperature, sunburn time, Beaufort level and historical data. Smart function for icy weather: Thanks to the built-in frost alarm, the alarm goes off 30 minutes earlier when the outdoor temperature drops below -3 °C. Create the perfect indoor climate with the additional base station In addition to the outdoor conditions such as rain, wind and sunshine, the indoor climate can have a big impact on our health and wellbeing. The base station features a built-in sensor that measures the room humidity and temperature and stores the maximum and minimum values. This helps you to take action to prevent excessively dry air in winter and stop mould from forming in rooms with a high humidity, such as the kitchen. An optimal indoor climate is indicated by a smiley face on the graphical comfort indicator. If the display shows a frowning smiley, this indicates that you need to take action to improve the indoor climate. Get a better overview of the weather and your indoor climate with the additional base station for your Wi-Fi Comfort Weather Station. BASE STATION FEATURES 7.4-inch colour display with detailed time and weather information LCD display with adjustable contrast for multiple viewing angles Wi-Fi connection for publication of data on platforms such as AWEKAS, Weather Underground and Weather Cloud Indoor temperature (°C/°F) and humidity with comfort indicator Displays the outdoor temperature (°C/ °F) and humidity UV index with UV level indicator Light intensity display Sunburn time display (in mins) Wind speed display (gusts or average wind speed) Beaufort scale display (scale for classifying the wind speed) Wind direction display (current and predominant, 16 directions) Precipitation quantity display (hourly, daily, weekly, monthly, total precipitation) Weather forecast (sunny, partly cloudy, overcast, rain, storm, snow) Atmospheric pressure display Perceived outdoor temperature Weather index for dewpoint, windchill factor and heat index Min./max. memory (up to 24 hours) High/low alarm with flashing symbol on the display Alarm with ice/frost warning Time (synced via the Internet), date, day of the week and moon phase Sunrise and sunset Weather data calibration 3 different display brightness levels High/Low/Off 7 languages for days of the week (EN, DE, FR, ES, IT, NL, RU) Supports firmware updates Supports 7-in-1 wireless sensor (not included) Supports up to 7 additional wireless sensors (not included) Dimensions: 202 x 138 x 38 mm / Weight: 510 g Power supply: Power adapter (included) and 3x AAA backup batteries (not included) Installation: Wall or stand DELIVERY CONTENT Base station Power adapter External sensor not included! Instruction manual

Available

€117.00* €149.00* (21.48% saved)
Skip product gallery

Spare Parts

Grey Rain Funnel
This high-quality spare part will quickly get your weather station working again.IMPORTANT: Is this part compatible with your weather station?This spare part is only compatible with the following devices:1519915201165097002510700251170025127002520CM300070025257002550CM30007002550GYE0007002550MGU0007002550QT50007002580700258170025827002585700258670026207003100CM30007003100GYE0007003100HZI0007003100QT50007003150700330070034007003600CM30007003600GYE0007003600QT500070044067802520780258078031507803300908050090806007002520000000700255000000070031000000007003600000000WSX1001CM3LC1WSX1001CM3LC2WSX1001000000

Available

€17.99*
Stand for the weather station, item no. 9080600, 7002520CM3000, 7002580
This high-quality spare part will quickly get your weather station working again.IMPORTANT: Is this part compatible with your weather station?This spare part is only compatible with the following devices:16421164237002520CM30007002580790252079025809080600

Available

€4.99*
Grey Wind Vane
This high-quality spare part will quickly get your weather station working again.IMPORTANT: Is this part compatible with your weather station?This spare part is only compatible with the following devices:1519915200152011650970025107002511700251270025137002520CM300070025257002550CM30007002550GYE0007002550MGU0007002550QT50007002571700258070025817002582700258570025867002590700261070026207003100CM30007003100GYE0007003100HZI0007003100QT50007003150700330070034007003600CM30007003600GYE0007003600QT5000700440678025207802580780315078033009080500908060096025107002520000000700255000000070031000000007003600000000WSX1001CM3LC1WSX1001CM3LC2WSX1001000000

Available

€17.99*
Black Wind Cups
This high-quality spare part will quickly get your weather station working again.IMPORTANT: Is this part compatible with your weather station?This spare part is only compatible with the following devices:15199152001520116268165097002510700251170025127002513700252570025317002550CM30007002550GYE0007002550MGU0007002550QT50007002571700258070025817002582700258570025867002590700261070026207003100CM30007003100GYE0007003100HZI0007003100QT50007003150700330070034007003600CM30007003600GYE0007003600QT50007004406780258078031507803300908050090806009602510700255000000070031000000007003600000000WSX1001CM3LC1WSX1001CM3LC2WSX1001000000

Available

€17.99*
Skip product gallery

Accessories

BRESSER Thermo-Hygro Sensor 7 Channel 868 MHz
Remote sensor for measuring of temperature and humidity. Seven channels settable. With extra long radio range of 150 meters on a radio frequency of 868 MHz. Good news for smart home owners: this sensor can be seamlessly integrated into the leading smart home system when paired with a compatible Tuya-enabled weather station.This device is compatible with weather stations with the following article numbers: 15659162691642116427164447002531700254170025717002582700258670026107002620700315070032007003210700322070032307003240700330070034007003500700351070035207003700700380070039007004406700630079025317902541790258079025817902585790258679032007903210790322079032307903300790350079035109080600908070090808007003100000000700311000000070036000000007003100CM30007003100GYE0007003100HZI0007003100QT50007003600CM30007003600GYE0007003600QT5000WSH4102WSX3001000000WSX3001CM3LC1WSX3001CM3LC2 Compatible with the following weather stations, but exclusively with firmware version V1.11 or higher (download available on the product page of the BRESSER homepage): 700258070025817002585WSX1001000000WSX1001CM3LC1WSX1001CM3LC2 FEATURES Temperature measuring Humidity measuring 7 channels settable RC frequency: 868 MHz Extra long radio range of 150 meters! Suitable for smarthome systems by Tuya Powered by battery; 2x AA (LR6) (not included!) SCOPE OF DELIVERY Remote sensor

Available

€34.95*
BRESSER Precision Thermo-Hygro Sensor
This high-performance outdoor temperature and humidity sensor is the perfect extension for your BRESSER weather station. The sensor transmits measurement data over an ultra-long wireless range of to 150 metres at a frequency of 868 MHz. There are seven different wireless channels available to choose from. Thanks to the built-in display, you can also use the precision thermo-hygro sensor as a standalone solution without a weather centre. This device is compatible with weather stations with the following article numbers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emperature measurement function Humidity measurement function 7 available channels Built-in display, can also be used as a standalone solution without a weather centre Temperature range: -20 ~ 60℃ Wireless frequency: 868 MHz Ultra-long range of up to 150 m Battery-operated with 2x AA batteries (not included) DELIVERY CONTENT Outdoor sensor Instruction manual

Available

€34.95*
BRESSER Soil Temperature and Moisture Meter
This additional sensor allows you to take two additional practical measurements with your BRESSER weather station. In addition to the soil temperature, the sensor can also measure the soil moisture – ideal for plant lovers and gardeners. Measurements are sent to the base station at 60 second intervals. The soil moisture meter can be positioned up to 150 metres away from the base station. There are also 7 different channels to choose from. And thanks to the weatherproof housing, the wireless sensor is able to withstand adverse weather conditions. This device is compatible with weather stations with the following article numbers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ireless and compact soil sensor Measures the soil humidity Measures the soil temperature Transmission interval: 60 seconds Extra-long range of up to 150 metres Cable length: approx. 140 cm 7 available channels LED indicator for data transmission Weatherproof housing Battery-operated with 2x AA batteries (not included) DELIVERY CONTENT Soil sensor Instruction manual

Available

€39.00*
BRESSER Spa and Pool thermometer
Want to cool off in your pool? This wireless and floating pool thermometer from BRESSER will tell you whether the water is at an optimal temperature. Measurements are shown on the built-in LCD display. You can also connect the pool thermometer to your BRESSER weather centre so that you can check the pool temperature from the comfort of your own home. This device is compatible with weather stations with the following article numbers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loating pool sensor for measuring the water temperature LCD display for displaying the temperature (°C/°F) Wireless frequency: 868 MHz Wireless transmission range of up to 30 m to optional base station 7 available channels Waterproof (IPX7) Powered by 2x AA batteries (not included) DELIVERY CONTENT Pool thermometer Instruction manual

Available

€39.00*
BRESSER Thermo-Hygro Sensor 433 MHz
Living room, bedroom and children's room, kitchen and of course the bathroom - all benefit from a regular room climate check to ensure optimal comfort. So, enhance your weather station with this BRESSER Thermo-Hygro Sensor, allowing you to monitor conditions at an additional location. The sensor sends data over a significant distance of up to 80 meters, instantly displaying it on your base station's screen. Wondering if it's really that warm? The sensor includes an LCD display for immediate, on-site verification of current readings. This feature also enables this temperature and humidity meter to function as a standalone thermo-hygrometer. This device is compatible with weather stations with the following article numbers: 14895 14993 14998 15004 15131 15243 15298 15405 15406 15407 15408 15409 15418 15479 15496 15652 16206 16207 7000012CM3000 7000012GYE000 7000013 7000023 7000027 7000029 7000030 7000060 7004200 7004200GYE000 7004200HZI000 7004200MGU000 7004200QT5000 7004210 7004330 7004340 7004350 7004360 7004370 7004380 7006500 7006510 7006511 7007201 7007350 7007402 7007403 7007404 7007511 7007520 7007610 7007620 9070600 9070700 9070710 9604101 9604200 9604210 7000012000000 7004200000000 FEATURES Measures temperature and humidity Easy-to-read LCD display Functions as an independent solution, or as a replacement or supplementary sensor for select BRESSER weather stations Maximum range of up to 80 meters IP Protection Class: IP44Frequency: 433 MHz Dimensions: 71 x 65 x 23 mm / weight: 44 g Powered by 2x 1.5V AAA batteries (not included) SCOPE OF DELIVERY Thermo-Hygro Sensor Instruction manual

Available

€24.95*
Grey Rain Funnel
This high-quality spare part will quickly get your weather station working again.IMPORTANT: Is this part compatible with your weather station?This spare part is only compatible with the following devices:1519915201165097002510700251170025127002520CM300070025257002550CM30007002550GYE0007002550MGU0007002550QT50007002580700258170025827002585700258670026207003100CM30007003100GYE0007003100HZI0007003100QT50007003150700330070034007003600CM30007003600GYE0007003600QT500070044067802520780258078031507803300908050090806007002520000000700255000000070031000000007003600000000WSX1001CM3LC1WSX1001CM3LC2WSX1001000000

Available

€17.99*
NATIONAL GEOGRAPHIC Additional / Replacement Base Station for Weather Station 9080600
NOTE: This base station is compatible with weather stations with the following item numbers. You’ll find your weather station’s item number printed on the back of the base unit. 7002541700258270025867002620700320070032107003220700323070032407003300700336070035007003510700370070038007003900700630090806009080700700310000000070036000000007003100CM30007003100GYE0007003100HZI0007003100QT50007003600CM30007003600GYE0007003600QT5000WSH4102WSX3001000000WSX3001CM3LC1WSX3001CM3LC2Fancy sharing your personally recorded weather data with your neighbours? Or do you need a replacement base station because yours didn’t quite survive the last house move – or the children’s enthusiastic games of tag? Whether you’re upgrading your setup or replacing a unit, this base station brings all the features of your existing weather station straight back to your screen in no time.FEATURES 5.7'' colour display for detailed time and weather information Wi-Fi connection with internet time synchronisation Receives weather data from the 7-in-1 professional sensor (not included) and from the wireless thermo-hygro sensor (not included) via 868 MHz Publish your local weather station data on platforms such as Weather Cloud Displays time, calendar, day of the week, and moon phase Alarm function Ice/frost warning Indoor temperature (°C / °F) and humidity with comfort indicator Outdoor temperature (°C / °F) and humidity display UV level and light intensity display Gust and average wind speed display Wind direction display (based on 16 compass points) Rainfall display (hourly, daily, weekly, monthly, total) Weather forecast (sunny, partly cloudy, cloudy, rainy, stormy, snowy) Air pressure Feels-like outdoor temperature Weather index including dew point, wind chill, and heat index Min./max. value memory (up to 24 hours) Alarm with LED indicator Weather calibration 3 display brightness levels: High / Low / Off 7 language options for the day of the week Supports firmware updates Security type: supports WPA3 encryption from firmware version 2.0 Supports a wireless 7-in-1 professional weather sensor (not included) Supports up to 7 additional wireless sensors (not included – item no.: 7009999) Easy setup and updates via WSLink app SCOPE OF DELIVERY Base station Power adapter No outdoor sensor included! Instruction manual

Available

€119.00*
BRESSER Additional / Replacement Base Station for Weather Station 15196
NOTE: This base station is compatible with weather stations with the following item numbers. You’ll find your weather station’s item number printed on the back of the base unit. 1519670035207006300WSH4102Fancy sharing your personally recorded weather data with your neighbours? Or do you need a replacement base station because yours didn’t quite survive the last house move – or the children’s enthusiastic games of tag? Whether you’re upgrading your setup or replacing a unit, this base station brings all the features of your existing weather station straight back to your screen in no time.FEATURES Large 10” HD TFT display (25.4 cm) with multiple viewing modes Shows live data from the 9-in-1 outdoor sensor (outdoor temperature, humidity, wind speed, wind direction, rainfall, UV level, light intensity, WBGT, air pressure) Heat stress index based on WBGT Weather forecast (14 days / 24 hrs) with temperature and precipitation probability Wi-Fi connection for uploading local data to ProWeatherLive or Weathercloud Indoor temperature (°C/°F) and humidity Displays online AQI and six major pollutants (PM2.5, PM10, NO2, SO2, O3, CO) Multi-channel overview of all connected sensors Feels-like outdoor temperature and dew point Max./min. memory with time stamp 72-hour trend graphs for all sensors Data storage with export function (up to 3 years) High/low alarms for various parameters Data calibration Alarm clock with frost alert Works as a digital photo frame with automatic slideshow (Wi-Fi connection and app required) Time and date (internet time synchronisation) Moon phase, sunrise/sunset, moonrise/moonset Touch button operation Expandable with optional sensors: Up to 7x thermo-hygro, soil and/or pool sensors (not included) Up to 7x water detectors (not included) 1x PM2.5/10 sensor (not included) 1x CO2 sensor (not included) 1x HCHO and VOC sensor (not included) 1x lightning sensor (not included) Power supply: USB cable (included), 5V/1A EU/UK adapter (included) SCOPE OF DELIVERY Base station Power adapter No outdoor sensor included! Instruction manual

€429.00*
Skip product gallery

Customers also bought

BRESSER Thermo-Hygro Sensor 433 MHz
Living room, bedroom and children's room, kitchen and of course the bathroom - all benefit from a regular room climate check to ensure optimal comfort. So, enhance your weather station with this BRESSER Thermo-Hygro Sensor, allowing you to monitor conditions at an additional location. The sensor sends data over a significant distance of up to 80 meters, instantly displaying it on your base station's screen. Wondering if it's really that warm? The sensor includes an LCD display for immediate, on-site verification of current readings. This feature also enables this temperature and humidity meter to function as a standalone thermo-hygrometer. This device is compatible with weather stations with the following article numbers: 14895 14993 14998 15004 15131 15243 15298 15405 15406 15407 15408 15409 15418 15479 15496 15652 16206 16207 7000012CM3000 7000012GYE000 7000013 7000023 7000027 7000029 7000030 7000060 7004200 7004200GYE000 7004200HZI000 7004200MGU000 7004200QT5000 7004210 7004330 7004340 7004350 7004360 7004370 7004380 7006500 7006510 7006511 7007201 7007350 7007402 7007403 7007404 7007511 7007520 7007610 7007620 9070600 9070700 9070710 9604101 9604200 9604210 7000012000000 7004200000000 FEATURES Measures temperature and humidity Easy-to-read LCD display Functions as an independent solution, or as a replacement or supplementary sensor for select BRESSER weather stations Maximum range of up to 80 meters IP Protection Class: IP44Frequency: 433 MHz Dimensions: 71 x 65 x 23 mm / weight: 44 g Powered by 2x 1.5V AAA batteries (not included) SCOPE OF DELIVERY Thermo-Hygro Sensor Instruction manual

Available

€24.95*
BRESSER Soil Temperature and Moisture Meter
This additional sensor allows you to take two additional practical measurements with your BRESSER weather station. In addition to the soil temperature, the sensor can also measure the soil moisture – ideal for plant lovers and gardeners. Measurements are sent to the base station at 60 second intervals. The soil moisture meter can be positioned up to 150 metres away from the base station. There are also 7 different channels to choose from. And thanks to the weatherproof housing, the wireless sensor is able to withstand adverse weather conditions. This device is compatible with weather stations with the following article numbers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ireless and compact soil sensor Measures the soil humidity Measures the soil temperature Transmission interval: 60 seconds Extra-long range of up to 150 metres Cable length: approx. 140 cm 7 available channels LED indicator for data transmission Weatherproof housing Battery-operated with 2x AA batteries (not included) DELIVERY CONTENT Soil sensor Instruction manual

Available

€39.00*
BRESSER Spa and Pool thermometer
Want to cool off in your pool? This wireless and floating pool thermometer from BRESSER will tell you whether the water is at an optimal temperature. Measurements are shown on the built-in LCD display. You can also connect the pool thermometer to your BRESSER weather centre so that you can check the pool temperature from the comfort of your own home. This device is compatible with weather stations with the following article numbers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loating pool sensor for measuring the water temperature LCD display for displaying the temperature (°C/°F) Wireless frequency: 868 MHz Wireless transmission range of up to 30 m to optional base station 7 available channels Waterproof (IPX7) Powered by 2x AA batteries (not included) DELIVERY CONTENT Pool thermometer Instruction manual

Available

€39.00*
BRESSER Thermo-Hygro Sensor 7 Channel 868 MHz
Remote sensor for measuring of temperature and humidity. Seven channels settable. With extra long radio range of 150 meters on a radio frequency of 868 MHz. Good news for smart home owners: this sensor can be seamlessly integrated into the leading smart home system when paired with a compatible Tuya-enabled weather station.This device is compatible with weather stations with the following article numbers: 15659162691642116427164447002531700254170025717002582700258670026107002620700315070032007003210700322070032307003240700330070034007003500700351070035207003700700380070039007004406700630079025317902541790258079025817902585790258679032007903210790322079032307903300790350079035109080600908070090808007003100000000700311000000070036000000007003100CM30007003100GYE0007003100HZI0007003100QT50007003600CM30007003600GYE0007003600QT5000WSH4102WSX3001000000WSX3001CM3LC1WSX3001CM3LC2 Compatible with the following weather stations, but exclusively with firmware version V1.11 or higher (download available on the product page of the BRESSER homepage): 700258070025817002585WSX1001000000WSX1001CM3LC1WSX1001CM3LC2 FEATURES Temperature measuring Humidity measuring 7 channels settable RC frequency: 868 MHz Extra long radio range of 150 meters! Suitable for smarthome systems by Tuya Powered by battery; 2x AA (LR6) (not included!) SCOPE OF DELIVERY Remote sensor

Available

€34.95*
BRESSER Precision Thermo-Hygro Sensor
This high-performance outdoor temperature and humidity sensor is the perfect extension for your BRESSER weather station. The sensor transmits measurement data over an ultra-long wireless range of to 150 metres at a frequency of 868 MHz. There are seven different wireless channels available to choose from. Thanks to the built-in display, you can also use the precision thermo-hygro sensor as a standalone solution without a weather centre. This device is compatible with weather stations with the following article numbers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emperature measurement function Humidity measurement function 7 available channels Built-in display, can also be used as a standalone solution without a weather centre Temperature range: -20 ~ 60℃ Wireless frequency: 868 MHz Ultra-long range of up to 150 m Battery-operated with 2x AA batteries (not included) DELIVERY CONTENT Outdoor sensor Instruction manual

Available

€34.95*
%
BRESSER ClimaTemp Thermo-Hygrometer 6-piece Set
The ideal room climate not only has positive effects on our well-being, it is also good for our health. The two critical values which determine the room climate are temperature and relative humidity.If for instance the humidity is too low the effects can be burning eyes, chapped lips as well as dry nasal mucosa, which reduces our ability to provide protection against inhaled pathogens. On the other hand, if the humidity is too high there is a risk of mould formation. This can also be prevented thanks to the indicator. With the practical 6 piece ClimaTemp Hygro Indicator Set Thermo-/Hygrometer you now have the control over the room climate in all the rooms you spend most of your time in (e.g. living room, bedroom, kitchen, office and children's rooms). Next to the exact measured values for the room temperature (°C) and humidity (%) the indicator also shows in symbolic form, whether these values are within the recommended range or if there is a need for action. FEATURESTemperature display in °CAir humiditySymbolic room climate indicatorEarly prevention of mouldMounting type: stand, wall mount and magnetSCOPE OF DELIVERY6x Thermo-/Hygro Station6x CR2032 batteriesmanual

Available

From €32.00*
Skip product gallery

Customers also viewed

NATIONAL GEOGRAPHIC Smart Tuya Weather Station with 7-in-1 Sensor
The NATIONAL GEOGRAPHIC Smart Tuya Weather Station with 7-in-1 Sensor integrates seamlessly into your existing Tuya smart home to make everyday life easier. Once set up, it can trigger other Tuya devices (not included) in your home as needed. Additionally, the reliable weather forecast and extensive data on air pressure, temperature, precipitation, air quality, and more keep you well-informed at all times. Furthermore, the bar charts provide all the important information about weather developments at a glance. Your weather station, your rules – with the smart home weather station With Tuya Smart Home integration, the home weather station becomes part of a versatile network in no time. Connect the device to your existing system with other compatible devices, which can then be conveniently controlled via the Tuya Smart Life App. This allows you to easily set up smart scenarios based on current weather conditions. Is your comfortable temperature falling below the desired level in the living room? Then have the heating automatically turn on. Conveniently, with the weather station with app, you can access all data anytime and anywhere. Climate data with solar power – the smart weather station Making precise weather foresight easy: Measure outdoor temperature, humidity, wind speed and direction, precipitation, UV level, and light intensity in your surroundings – all thanks to the efficient 7-in-1 outdoor sensor. The movable solar panel ensures eco-friendly power supply. Only when necessary does the sensor of the professional weather station rely on a battery backup. And with the integrated thermo and hygrometer sensor in the base, you can also keep an eye on the indoor climate. Breathe in, breathe easy: weather station with air quality monitor Always know what's in the air: The smart weather station displays internet data on air quality on the screen, such as the air quality index and various pollutant values. Want to measure on-site? Then easily expand the professional weather station with optional sensors. This way, you can directly detect and display data like PM2.5/10, CO2, HCHO, and VOC. Look forward to smart climate technology for your home – with the NATIONAL GEOGRAPHIC Smart Tuya Weather Station with 7-in-1 Sensor. FEATURES BASE STATION Smart weather station controllable via the Tuya Smart Life App Can trigger other Tuya smart devices Measurement of indoor temperature and humidity Weather forecast and air pressure measurement Room climate comfort indicator Display of precise measurement data from the 7-in-1 solar outdoor sensor (outdoor temperature and humidity, wind speed/direction, precipitation, UV level, light intensity) Bar chart for air pressure, precipitation, indoor/outdoor temperature & humidity Display of internet data on air quality (air quality index (AQI), PM2.5, PM10, CO2, CO, HCHO, VOC) High/low value alarm Max./min. value memory WiFi connection to publish local weather data on online platforms like Weather Underground and Weathercloud Automatic time and date display*** Integrated alarm clock Display of moon phase, sunrise/sunset Expandable with the following optional sensors for display on the screen and in the Tuya App: Up to 3x thermo-hygro, soil, and/or pool sensors (not included) Up to 3x water detectors 1x PM2.5/10 sensor (not included) 1x CO2 sensor (not included) 1x HCHO and VOC sensor (not included) Power supply: mains adapter (included), CR2032 backup battery (not included) *** PLEASE NOTE: This device receives the DCF time signal (Central European Time). However, you can easily adjust the time display to different time zones using the manual time setting.FEATURES 7-IN-1 OUTDOOR SENSOR Measurement of temperature, humidity, wind speed, wind direction, precipitation, UV level, and light intensity Operates via large movable solar panel Operates on 3x AA batteries (not included) in low sunlight Range: up to 150 m Dimensions: 390 x 174 x 465 mm SCOPE OF DELIVERY Base station incl. mains adapter 7-in-1 wireless sensor Instruction manual

Available

€179.00*
BRESSER Wi-Fi Comfort Weather Station with 7-in-1 Professional Sensor and Modern Colour Display
With its colorful display and elegant design, the BRESSER WiFi Comfort Weather Station with 7-in-1 professional sensor offers you a perfect overview of time and weather. Through the LCD display contrast setting, you succeed in reading the time, the day of the week, the phases of the moon, the sunrise as well as the sunset, on the 7.4" color display from almost any viewing angle. The 7-in-1 professional outdoor sensor reliably transmits measured values for wind speed, wind direction, humidity, temperature, precipitation amount, as well as UV level and light intensity via 868 MHz frequency to the base station. Through the internal storage and analysis of the measurement data, a reliable local weather trend forecast for the coming 12 hours is displayed using graphical symbols. An extra alarm can also be activated for frost/ice warning. The WiFi function allows users to share their local data via weather platforms such as ''Weather Underground'' or ''Weather Cloud''. In addition, the WiFi feature enables internet time synchronization, as well as firmware updates. This station can also be connected to the German language portal AWEKAS. Optionally, you can transfer your weather data to AWEKAS or retrieve your weather data there worldwide. Transfer, among other things, data such as air temperature, humidity, soil temperature and humidity, pool water temperature to your smart home control. This is possible without any problems and free of charge via our partner AWEKAS. Under the following link this can be set up: https://www.awekas.at/for2/index.php?thread/17080-software-api-stations-api-beschreibung-beta/FEATURES7.4'' color display for detailed time and weather informationWiFi connection with internet time synchronizationLCD display contrast adjustment to accommodate different viewing anglesPublish local data generated by your weather station on internet platforms such as "AWEKAS", ''Weather Underground'' and ''Weather Cloud''Display time, calendar, day of the week and moon phaseIce / frost warningIndoor temperature (°C / °F) and humidity with comfort displayOutdoor temperature (°C / °F) and humidity displayDisplay of UV level and light intensityDisplay of wind speed and wind direction (exact display based on 16 directions)Precipitation amount (hourly, daily, weekly, monthly, total rain)Weather forecast (sunny, partly cloudy, cloudy, rainy, stormy, snowy)Atmospheric pressure displaySensed outdoor temperatureWeather index for dew point, wind chill factor and heat indexMin. - /Max. value memory (up to 24 hours)3 different display brightness levels: High / Low / Off7 languages for day of the week (EN/ DE/ FR/ ES/ IT/ NL/ RU)Supports firmware updatesSecurity type: supports WPA3 encryptionSupports one 7-in-1 wireless professional sensorSupports up to 7 additional wireless sensors (7009999, SP60010000000, SM60020000000) Dimensions: 202 x 138 x 38 mmSCOPE OF DELIVERYBase station7-in-1 professional sensorPower supply

Available

€249.00*
BRESSER 7-in-1 Outdoor Sensor
This high-quality replacement part will quickly get your weather station back in working order.IMPORTANT: Will this part fit your weather station? This replacement part is only compatible with certain weather station models. Below you'll find an overview of all compatible devices. Simply compare the article number on your device with the models shown to ensure the replacement part is suitable. Compatible with the following devices:151971519815199156601642116427164441651170025417002582700258670026107002620700330070033607003400700350070035107004406780001179025417902586790323079033007903500790351090806007003100000000700311000000070036000000007003100CM30007003100GYE0007003100HZI0007003100QT50007003600CM30007003600GYE0007003600QT5000WSX3001000000WSX3001CM3LC1WSX3001CM3LC2FEATURES Replacement wireless sensor, transmits data to the Wi-Fi Comfort weather centre Measures the outdoor temperature and outdoor humidity Measures the wind speed, wind direction and rainfall Measures the UV level and light intensity Transmission range of up to 150 metres Place in an unobstructed location in order to obtain accurate sunlight and rain data Power supply: 3x AA batteries (not included) SCOPE OF DELIVERY Wireless sensor Mounting materials Base station is not included! Instruction manual

Available

€119.00*
%
BRESSER Wi-Fi ClearView Weather Station with 7-in-1 Sensor
The new BRESSER WIFI ClearView Weather Station with 7-in-1 sensor offers a very comprehensive range of weather data. The multifunctional outdoor sensor can easily be installed with the included mounting accessories! The outdoor sensor reliably transmits measured values for wind speed, wind direction, humidity, temperature, precipitation, as well as UV level and light intensity via 868 MHz frequency to the base station. The base station shows a large variety of current and historical local weather data on its 8.3'' TRUE BLACK colour display. The latter allows internal storage and evaluation of the measurement data over a period of 24 hours. A very reliable forecast for the upcoming 12h is calculated by your local weather data which will be displayed on the base station. The WIFI function allows users to share their local data via apps such as 'Weather Underground'' or ''Weather Cloud''. In addition, the WIFI function enables Internet Time Synchronization and firmware updates. An alarm can be individually programmed for maximum and minimum values, which triggers both an acoustic and a light alarm signal when the specified value is reached. For outside temperatures from -3°C, a special alarm can also be activated for frost/ice warnings. A poor indoor climate often poses health risks, especially for children and elderly people. The BRESSER WIFI ClearView Weather Station offers a smart feature for this. The indoor climate indicator informs about current indoor climate conditions by means of the room climate indicator. For all ''moon addicts'' the different moon phases are also displayed. An alarm clock with snooze function is also included in the range of functions. This station can also be connected to the mulitlingual portal AWEKAS* (*EU customers only) . Optionally you can transmit your weather data to AWEKAS or call up your weather data worldwide. Transfer data such as air temperature, humidity, soil temperature and humidity, pool water temperature to your smart home home control system. FEATURES8.3'' colour display (19.3 x 9.3 cm) for detailed time and weather information WIFIconnection Internet time synchronization Receives weather data from the 7-in-1 sensor and the wireless thermo-hygro sensor via 868 MHz Publish your local data from your weather station on platforms like 'Weather Underground'', ''Weather Cloud" and "AWEKAS*" (*EU customers only)Display of time, calendar, weekday and moon phase wake-up function Ice/Frost warning Interior temperature (°C / °F) Humidity with comfort display Outdoor temperature (°C / °F) Display of UV level and light intensity Display of gusts and average wind speed Wind direction (exact display based on 16 directions) Rainfall (hourly, daily, weekly, monthly, total rainfall) Weather forecast (sunny, partly cloudy, cloudy, rainy, stormy, snowy) Air pressure display Perceived outdoor temperature weather index for dew point, wind chill factor and heat index Min/max value memory (up to 24 hours) Alarm with LED display Weather Calibration 3 different display brightness levels: High / Low / Off 7 languages for the weekday Support of firmware updates Security type: supports WPA3 encryptionSupport a wireless 7-in-1 sensor with 150 m transmission range (included) Supports up to 7 additional wireless sensors (optional) (Art.-No.: 7009999) Integrated WIFI transmission to AWEKAS* (*EU customers only) What's IncludedBase station Outdoor sensor 7-in-1 incl. mounting accessories Power supply unit and cable, batteries not included

Available

€199.00* €249.00* (20.08% saved)
%
BRESSER 7-in-1 ClimateConnect Tuya Smart Home Weather Station
The ultimate smart weather solution: the BRESSER 7-in-1 ClimateConnect Tuya Smart Home Weather Station allows you to integrate weather data into your smart home system. It supports IoT (Internet of Things) technology, the foundation of smart home systems. The smart weather station is the perfect addition to all smart home systems powered by Tuya, the world-leading IoT platform. Based on measurements for temperature, humidity, air pressure, wind speed, wind direction, precipitation, UV level and light intensity, it controls other Tuya-enabled devices in your home - completely automatically and according to your preferences. The weather station also features a rain gauge, which can be used to control your garden sprinkler. When it gets dark, the light sensor switches on the lights for you, while the thermometer can be set to turn up the heating on cold winter evenings. The possibilities are endless! Weather station with app - make the most of your local measurement data Access weather readings from your 7-in-1 outdoor sensor anytime, anywhere and create rules for your smart home in a flash: All you need is the Tuya Life app. Then simply add your smart weather station to the app via Wi-Fi and enjoy the full range of functions. You can also set a high/low alarm in the app interface to receive warnings when measurements reach a critical threshold, e.g. to receive notifications about the indoor climate so that you can take action against mildew. If you're a passionate hobby meteorologist, you're probably keen to keep up to date with the latest weather trends. The weather station allows you to view daily, monthly and annual graphics and load historical data into the app. PLEASE NOTE: This device only connects to the internet on the 2.4 GHz Wi-Fi frequency. Most routers establish the correct connection automatically. If this is not the case, you can usually make a manual adjustment.  If you're not sure what to wear, simply take a look at the clear, attractive colour display on the base station to find out what the weather is doing. You can also use voice commands to ask about the weather, as the weather station is compatible with Alexa. In just a few simple steps, the weather station can be connected to Alexa. And then you can easily control the smart weather station by voice command: Alexa, what is the temperature from the weather station? Alexa, what is the temperature of the temperature and humidity sensor? The answer always follows reliably and quickly. If, on the other hand, you prefer to communicate with Google Assistant, you can simply use that to get the desired information about the weather situation. The source of this information are always your very own local readings. The ultimate smart weather station Designed for smart homes, this weather station comes with the very latest technology. The base station displays the time, date and day of the week, which are synchronized over the Internet. It also features an integrated alarm clock with a snooze function, which is guaranteed to ensure that your day starts on time. After getting up, you can take a look at the weather forecast and the weather index with the perceived outside temperature and heat index, and then decide what to wear for the day ahead. Make your life easier - with the BRESSER 7-in-1 ClimateConnect Tuya Smart Home Weather Station. Sounds convincing, but need more smart options for your home? Then expand the smart weather station with up to 3 additional, optional sensors, e.g. a pool thermometer, a thermo/hygro sensor or a soil thermometer (see accessories).BASE STATION FEATURES Smart weather station for Tuya smart homes Operated via Tuya Life app Can control other Tuya-compatible IoT devices Adjustable high/low alarm in app interface View daily, monthly and annual graphs in app interface Historical data can be downloaded from app interface Access to data via Alexa and Google Assistant Colour display shows the time and weather information Displays precise measurement data from the 7-in-1 outdoor sensor (Outdoor temperature and humidity, wind speed, wind direction, precipitation, UV level, light intensity) Indoor temperature (°C/°F) and humidity Weather forecast Air pressure Weather index (perceived outdoor temperature, dewpoint, windchill factor and heat index) Gusts and average wind speed Beaufort index (scale for measuring wind speed) Weather data calibration Max/min weather data memory Synchronises the local time and date via the Internet Alarm function with snooze button Automatic dimming function for the backlight Automatic mode for the channel display 7 languages for days of the week (EN, DE, FR, ES, IT, NL, RU) Supports up to 3 additional sensors (not included, see accessories) Mounting options: Can be placed on tabletop with built-in stand or wall-mounted Power supply: Power adapter (included) and back-up battery (not included) Dimensions: 130 x 111 x 26 mm / Weight: 214 g FEATURES OF 7-IN-1 OUTDOOR SENSOR Measures the temperature and humidity Measures the wind speed, wind direction and rainfall Measures the UV level and light intensity Range: Up to 150 m Power supply: 3x AA batteries (not included) Dimensions: 343.5 x 393.5 x 136 mm / Weight: 757 g DELIVERY CONTENT Base station 7-in-1 wireless sensor Power adapter Instruction manual

Available

From €179.00*
NATIONAL GEOGRAPHIC Home Weather Station SC with 8-in-1 Outdoor Sensor and Colour-Changing Display
With the NATIONAL GEOGRAPHIC Home Weather Station SC with 8-in-1 Outdoor Sensor and Colour-Changing Display, you’ll know what to expect outside just by glancing at the screen colour. The compact yet powerful multi-sensor accurately measures outdoor temperature, along with many other key weather parameters, including the Wet Bulb Globe Temperature (WBGT). Ideal for outdoor enthusiasts and active individuals, the heat stress index helps you gauge the impact of high temperatures, so you can plan hikes, nature excursions, and outdoor activities with the weather in mind. A colourful display that adapts to the temperature Is it pleasantly warm, or still a little chilly? Thanks to the temperature-dependent colour change, this home weather station gives you an instant visual cue. Choose whether the display reflects the outdoor temperature, the Wet Bulb Globe Temperature, or the Feels like Temperature. You can also activate the Auto-Loop to cycle through 256 colours automatically or pick your favourite from 8 preset options. High-precision multi-sensor for real-time local weather data More reliable than any weather app: This professional weather station gathers detailed weather data directly from your location. The advanced 8-in-1 sensor measures temperature, humidity, wind speed, wind direction, rainfall, UV level, light intensity, and Wet Bulb Globe Temperature. With a range of up to 150 m, all this information is displayed on the base station's screen, providing a clear and comprehensive weather overview. Stay ahead of the heat with WBGT and the heat stress index What is WBGT? The abbreviation stands for Wet Bulb Globe Temperature, a special type of temperature measurement that factors in air temperature, humidity, and solar radiation. This makes it an essential tool for planning outdoor activities safely on hot days. When temperatures soar, it’s important to avoid excessive strain on your body. With the 4-level heat stress indicator, you can monitor conditions in real time and stay safe in the heat! Comprehensive weather insights with forecasts, history, and alerts From sunny and cloudy to rainy or snowy – the 6-level weather forecast provides an instant outlook for the next 12 to 24 hours. You can also set a high/low temperature alert with custom thresholds for all key measurements. To track weather patterns over time, simply check the 24-hour history log as well as the maximum and minimum recorded values. Plan your trips, outdoor adventures, and daily activities with confidence using the NATIONAL GEOGRAPHIC Home Weather Station SC with 8-in-1 Outdoor Sensor and Colour-Changing Display. FEATURES BASE STATION Colour-changing display for a clear and intuitive weather overview 3 colour modes: Temperature-dependent (outdoor, WBGT, or Feels like), Auto-Loop, or manual selection Displays precise measurements from the 8-in-1 outdoor sensor (outdoor temperature, humidity, wind speed, wind direction, rainfall, UV level, light intensity, WBGT) Heat stress index Indoor temperature and humidity Graphical weather forecast Air pressure display Beaufort scale indicator (a scale for measuring wind strength) Customisable high/low alerts for key weather parameters Max./Min. value memory History log (hourly data for the last 24 hours) Feels like temperature and dew point display Automatic time synchronisation via the outdoor sensor *** Date, weekday, and moon phase display Built-in alarm function Expandable with up to 3 optional sensors (not included) Power supply: USB cable (included), EU/UK adapter (included), CR2032 backup battery (not included) ***PLEASE NOTE: This device receives the DCF time signal (Central European Time). However, you can easily adjust the time display to different time zones using the manual time setting. FEATURES SENSOR Measures temperature, humidity, wind speed, wind direction, rainfall, UV level, light intensity, and WBGT Built-in DCF time signal receiver for optimal reception Waterproof housing Long transmission range of up to 150 m Battery-operated: 3 x AA batteries (not included) SCOPE OF DELIVERY Base station USB cable with power adapter 8-in-1 multi-sensor Instruction manual

Available

€179.00*
BRESSER 7-in-1 Outdoor Sensor with Adjustable Solar Panel
This high-quality replacement part will quickly get your weather station back in working order.IMPORTANT: Will this part fit your weather station? This replacement part is only compatible with certain weather station models. Below you'll find an overview of all compatible devices. Simply compare the article number on your device with the models shown to ensure the replacement part is suitable. Compatible with the following devices:151971519815199156601626916421164271644416511700254170025827002586700261070026207003200700321070032207003230700324070033007003360700340070035007003510700370070038007003900700440679025417902586790320079032107903220790323079033007903500790351090806009080700WSX3001000000WSX3001CM3LC1WSX3001CM3LC2FEATURES Powered via a large movable solar panel In case of insufficient sunlight operation via 3x AA batteries (not included) Measures the temperature and humidity Measures the wind speed, wind direction and rainfall Measures the UV level and light intensityRange: up to 150 m Dimensions: 390 x 174 x 465 mm SCOPE OF DELIVERY Solar-powered outdoor sensor Mounting materials Base station is not included! Instruction manual

Available

€169.00*