Nexcope NIB610 professional inverted laboratory microscope

The Nexcope NIB900 is a high-quality research microscope that already integrates two contrast methods: phase contrast and fluorescence. This means it leaves nothing to be desired for life science and cell culture research. You can observe your samples either on a standard slide, in cell culture plates (Terasaki standard) or in a Petri dish. High-quality optical equipment 10x N-iPLEN PH Plan S-APO objective, NA 0.30, 1.2 mm 20x N-iPLEN PH Plan S-APO objective, NA 0.45, with correction ring for vessel base 0-2 mm 40x N-iPLEN PH Plan S-APO objective, NA 0.60, with correction ring for vessel base 0-2 mm WF 10x FN 22 eyepieces for spectacle wearers, integrated dioptre adjustment +/- 4 dpt Illumination and contrast methods The bright LED illumination for transmitted light / brightfield and phase contrast delivers high-contrast, high-resolution images in combination with the S-Apo objectives and the high numerical aperture. Adjusting the phase contrast is very easy with the integrated Bertrand lens: you no longer need a separate centring telescope and can check the alignment at the touch of a button. Special applications often require working with fluorescence. With the integrated LED fluorescence illumination, you can choose from 3 wavelengths (GBU) for fluorescence excitation. The illumination is conveniently controlled and adjusted via a separate control panel. The display is clear and easy to read. In addition, the intensity and the illuminated field can be adjusted using several sliders. This protects your cell culture from unnecessary radiation and ensures you always work with optimal settings. The microscope is prepared for use with 3D Emboss contrast. The Köhler illumination unit features a condenser with a high numerical aperture of 0.55, putting it far ahead of other inverted microscopes. The working distance is generously dimensioned at 26 mm. For easy handling and sample changing, the illumination unit can be folded away. The phase contrast unit is integrated. Mechanics The microscope features a large stage with an adjustment range of 130x85 mm. Various inserts for Petri dishes, Terasaki plates etc. are available. The focusing drive is coaxial on both sides and moves the stage by 9 mm. One full turn of the coarse focus moves the sample by 2 mm; one full turn of the fine focus moves it by 0.2 mm. Ergonomic design The NIB900 features numerous functions that make ergonomic working possible. The most important controls are positioned close together and are easy to reach. The mechanical stage drive is positioned low and, thanks to the universal joint, can also be operated at a slight angle, enabling a comfortable hand position. The eyepiece distance for spectacle wearers can be adjusted between 48 and 75 mm, and +/- 8 dpt can be compensated for, as both eyepieces are equipped with correction. Below the viewing port, the most important status indicators can be read on a display, where the brightness of the transmitted light is also adjusted. Scope of delivery: Inverted microscope incl. 3 Plan SApo objectives Pair of WF 10x eyepieces Condenser NA 0.55 incl. phase contrast unit UV protection screen, handles (2) Control panel for LED fluorescence 12V 1.5A power supply unit (microscope) 5V 6A power supply unit (fluorescence illumination) Sliders / diaphragms for transmitted light illumination (4) Device comes in two boxes: 56x56x51 cm 28 kg 62x57x47 cm 16 kg Device dimensions: 87x40x67.5 cm, total 38 kg

Inverted microscopes are primarily used for inspecting cultures. The NEXCOPE NIB620 is the ideal professional microscope for this purpose. The specimen is illuminated from above and inspected from underneath. This inverted design enables microscopy of plankton, microalgae and cell cultures. This allows cell cultures to be examined directly in the culture vessel without taking samples. This special microscope can be used in a wide range of applications, such as water management agencies, research institutes and universities, human and veterinary medicine, agriculture, marine biology, limnology and aquaculture. The inverted design prevents the lenses from coming into contact with the fluid. The specimen does not need to be covered, and the coating thickness is irrelevant. Culture vessels require a base thickness of 1.2 mm. The integrated display informs you at any time about the selected magnification and the status of the illumination as well as the sleep mode. The brightness can be programmed for each objective so that there is no need to readjust when changing magnification and the user is not blinded. OBJECTIVESThe NEXCOPE NIB620 microscope is equipped with a quintuple nosepiece. One planachromatic 4x objective, and one each of 10x, 20x and 40x planachromatic phase contrast objectives are included. The condenser has a numerical aperture (N.A.) of 0.3 and an extra-long working distance. EYEPIECESThe eyepieces have a 22 mm field of view. Thus you achieve a very large field of view. The high eyepiece head is ideal for spectacle wearers. A rubber edge protects against scratches on contact. A diopter compensation of -5 to +5 can be set individually for each eyepiece. The interpupillary distance can be adjusted between 48 mm and 75 mm. You can adjust the angle of the binocular part according to your posture and physique. ILLUMINATIONThe powerful 3 W LED has an adjustable brightness and provides the best possible illumination. The brightness can be adjusted individually for each objective. When an objective is changed, the NEXCOPE NIB620 automatically adjusts the previous brightness settings. The display shows the currently selected objective and the current brightness. The adjustment-free condenser enables quick readiness for use. The condenser can be removed for bright field observations in order to create more free space. MECHANICS In addition to the coarse focus, the fine focus helps to render a very sharp image of the object. A full turn of the fine focus moves the stage up/down by 0.2 mm. On the right side, fine focus can be done with one finger. The friction of the coarse focus can also be adjusted. The fine focus knobs are held in place magnetically and can be replaced as needed. The cross stage offers the possibility to insert different holders. For example, you can insert slides or petri dishes. The microscope can also be operated without the cross stage. This creates a large, flat surface. CAMERA CONNECTION The NEXCOPE NIB620 is specially designed for use with c-mount cameras. You can choose from two different adapters, depending on the sensor size:0.5x C-mount adapter for sensor sizes up to 2/3’’1x C-mount adapter for sensor sizes of 1’’A corresponding 1x c-mount camera adapter is included in the scope of delivery. The camera connection is on the side and has a rod between visual observation and camera (100/0 or 0/100). ACCESSORIES (optional)Hoffman modulation phase contrastRelief 3D contrastStage plate holder (Universal holder, Terasaki holder, Petri dish holder (54 and 90 mm) FEATURESProfessional inverted transmitted light microscopeLens type: Planachromatic (60 mm parfocal length)Precise mechanicsBright illumination SCOPE OF DELIVERYNIB620 Inverted microscope with quintuple nosepiece:4x Objectives (10x, 20x, 40x with phase contrast), 4x as bright field2x Extra wide field eyepieces (field of view: 22 mm)1x Universal phase contrast slider1x Universal holder1x C-mount photo adapter (1x)2x Spare fuses1x Hexagonal screwdriver1x Dust cover

A versatile combination set consisting of the Researcher Bino microscope and MikroCam SF UHD camera optimal for school, hobby, and profession. The robust Researcher Trino microscope impresses with its binocular view and allows for comfortable, precise work with clear, detailed images. Together with the MikroCam SF UHD camera, which can be directly mounted on the trinocular connection, observations can be conveniently captured digitally, displayed on a computer, and secured for presentations or analyses ideal for use in education, leisure, or professional applications.The Microscope in DetailThe BRESSER Researcher Trino Microscope is the best-selling BRESSER transmitted light microscope in the mid-price range due to its unbeatable price-performance ratio. It already provides impressive insights into the microcosm. The microscope image is sharp and high-contrast. With its solid metal body and wide magnification range of 40x-1000x, based on 4 objectives and a (replaceable) pair of eyepieces, the BRESSER Researcher meets high demands. The 40x and 100x objectives are spring-loaded to prevent damage, and the 100x objective can be used for oil immersion microscopy (immersion oil is included). The bright LED illumination is adjustable with a dimmer. The Abbe condenser is height-adjustable and centring, and equipped with an iris diaphragm. For perfect sharpness adjustment, coarse and fine focus are available, and for precise positioning of the specimen, a coaxial stage. The 360° rotatable binocular head allows for individual adjustment of the interpupillary distance and diopter compensation between the observer's eyes.Instead of a binocular head, the Trino Researcher has a trinocular head. This allows the user to observe with both eyes while simultaneously connecting a camera or PC eyepiece. Cameras from the MikroCam SP series and the MikrOkular Full HD can be used without further adapters. The trinocular tube can be set to be parfocal with the eyepieces.For special contrast methods, the Researcher Microscope can be upgraded with a dark field condenser (dry or oil). The Researcher Trino is thus the most affordable trinocular microscope that offers this possibility.Examination Objects (Example):BloodRotifers / Wheel AnimalculesBacteriaParasitesPlants (thin sections)AlgaeSCOPE OF DELIVERY MICROSCOPETrinocular microscope1 pair of DIN eyepieces WF 10x with 23mm diameter4-fold objective turret4 DIN objectives: 4x/0.1, 10x/0.25, 40x/0.65, 100x/1.25 oilCondenserCross table with Nonius scaleFine and coarse focusImmersion oilThe Microscope Camera in DetailThe BRESSER MikroCam SF cameras are excellent for capturing photos and videos with a microscope. This allows observations of objects to be easily documented and shared with others. The high frame rate of the MikroCam SF series enables the creation of videos with a smooth image flow. The built-in Sony sensors provide good image quality, colour reproduction, and dynamics.The included software supports the following languages: German, English, French, Spanish, Italian, Polish, Turkish.The MikroCamLabII software offers a wide range of functions. Essential functions (e.g., exposure time and sensitivity) can be controlled automatically or manually.Very convenient are the functions for so-called focus stacking (for high depth of field) and the creation of a mosaic or panorama. These two functions can be performed with a previously recorded image series or directly from the live view. The creation of sharp images using live focus stacking (EDF) is possible with the MikroCamLabII software in just a few minutes. While you focus on the microscope, the software gradually builds the finished, completely sharp result image without further intervention. This way, you get impressive, sharp image results in no time.The measurement function* included in the software helps you determine sizes or display a scale. You can measure distances, angles, or areas with just a few clicks. Extensive functions support you in measuring circles with area and radius or even complex polygons.Measurements can be performed in the captured image or in the live image. The MikroCamLabII software also has extensive algorithms for automated image analysis, e.g., for particle counting or area evaluation.The housing features a C-mount connection thread and can therefore be used with microscopes from various manufacturers. We are happy to advise you on which MikroCam is optimally suited for your microscope.For use on devices with a 23.2 mm receptacle, an optional 0.5x reducing optic (Art. No. 5914015 (fixed), Art. No. 5914005 (variable)) is available. For special applications, e.g., with a C-mount objective, the camera can also be mounted on the integrated 1/4" tripod thread.*A suitable measuring tool is required for calibrating the measurement function, e.g.: Art. No. 5916710 or 5916720.FEATURES OF THE MICROSCOPE CAMERA3840x2160 pixel sensor (UHD), 6.22 x 3.5 mm (1/2.5")Frame rate: up to 30 fpsHigh-quality metal housingMany software functions such as measurement, focus stacking (to overlay multiple recordings for increased depth of field), mosaic (to display larger image fields)Image and video recording, including time-lapse functionCompatible with microscopes from all manufacturersSYSTEM REQUIREMENTSWindows 10 or 11Intel i3, i5, i7 or i9 processor from 6th generation or higher orAMD FX or Ryzen processor from 1st generationInternet connection for software downloadMin. USB 2.0SCOPE OF DELIVERY MICROSCOPE CAMERACamera headUSB 2.0 cable (approx. 1.8 m)Adapter for 23.2 mm, 30 mm, and 30.5 mm eyepiece tubesCamLabLite software as a download link, language versions German, English, French, Spanish, Catalan, Italian, Turkish, Russian, Polish, Portuguese, Indonesian, Chinese, Bulgarian

The Researcher Trino offers observing fun for an unbeatable price. Based on a solid metal body and equipped with DIN eyepieces and objectives, this transmission-type microscope fulfils even professional demands with its optical and mechanical quality. Many details, for example the cross table for optimal object positioning or the focuser with coarse and fine drive for dead-sharp images. Instead of a binocular head, the Trino Researcher has a trinocular head. With this equipment, the observer can make binocular obseravtions and - at the same time! - take photographs or use a PC eyepiece Features Type: Biological microscope View: Trinocular Application range: Biology, Education, Teaching, Imaging Solutions, Botany Illumination: LED with dimmer Level: Intermediate, Expert Warranty: 2 years Double-lens condensor with iris diaphragm Incl. mechanical stage Adjustable eye relief Specifications Comfortable binocular view, 360° turnable head Magnifications: 1000x, 400x, 100x, 40x Illumination: LED Eyepieces: 10x Eyepiece diameter: 23.2 mm Objectives: 4x, 10x, 40x, 100x (oil immersion) Power supply: 220/240V Included Accessories 4 DIN-objectives 2 eyepieces Mechanical stage Condensor Trinocular head

Professional combination set for precise analyses and sharp image transmission: This powerful set combines the high-quality digital microscope DST-0745 with the modern MikroCamII 12MP camera into an optimally coordinated unit. Ideal for detailed observations, high-resolution live displays, and reliable visual documentation of your work results.The microscope in detailThe BRESSER DST-0745 is a special microscope that operates with a C-Mount camera (not included). Thus, direct viewing on a screen is possible. Due to the vertically mounted optics, there is no image shift when focusing. This is particularly advantageous for "focus stacking" shots.The zoom is continuously adjustable from 0.7x to 4.5x. A coarse and fine focus makes it easier to sharpen, especially at high magnifications.Due to the convenient and user-friendly operation, the digital microscope is particularly suitable for daily use in the workshop. Measurements, quality controls of surfaces, or checking components and raw materials become easy with the workshop microscope. Insects, plants, and rocks are also impressively displayed.The DST-0745 workshop microscope is not suitable for visual observation, as it is only a zoom lens. It is used in conjunction with a MikroCam C-Mount.It is designed for camera sensors of about 1/2".With the two flexible incident light lamps, the light can be optimally positioned.The transmitted light illumination helps in observing transparent objects. The brightness of both illuminations can be adjusted in five levels.The magnification of a USB camera differs from the objective magnification. Therefore, a total magnification of the digital system cannot be specified. It depends on the sensor size and the display on a monitor.Compatible MikroCam cameras:5914122 MikroCam SF Full HD5914321 MikroCam SP 3.1 MP5914520 MikroCam SP 5.0 MP5914522 MikroCam SF 5.0 MP5914822 MikroCam SF UHD5914912 MikroCamII 12MP USB 3.05914170 MikroCam MINI Full HD HDMI5914185 MikroCam PRO HDMI 5MP5914190 MikroCam Pro HDMI AutofocusFEATURES OF THE MICROSCOPEDesigned for C-Mount microscope camerasUp to 1/2" sensor size is suitableMax. object height: 190 mmContinuously adjustable zoom (0.7x - 4.5x)Two flexible LED incident light lampsLED transmitted light illuminationAdjustable brightnessSCOPE OF DELIVERY OF THE MICROSCOPEZoom objective head 0.7x - 4.5xStand with incident and transmitted light illuminationGlass object plate (one side frosted)Plastic object plate (one side white, one side black)Power supply, user manual, dust coverThe microscope camera in detailThe BRESSER MikroCam II cameras allow for easy capturing of photos and videos with a microscope.The modern Sony® CMOS sensors deliver brilliant colors with very low image noise and are thus the perfect solution for applications where natural color reproduction is important. The included capture software allows for numerous settings when capturing still images and videos. An integrated measurement function* allows for measurement already in the live image. The software included supports the following languages: German, English, French, Polish, Turkish, Chinese.The housing features a C-Mount connection thread. For use on devices with a 23.2mm mount, an optional variable reduction lens 0.5x (Art. No. 5914005) is available. For special applications, the camera can also be mounted on the integrated 1/4'' tripod thread.The BRESSER MikroCamII is equipped with a USB 3.0 connection compared to the MikroCam SP, allowing for up to 8x higher data rates than with USB 2.0 connections. The cameras are thus capable of transmitting more than 25 images per second (depending on resolution, exposure time, and computer performance). This is particularly important for live microorganisms. The camera is exceptionally light-sensitive, allowing for work with short exposure times even at high magnifications or demanding contrast methods.FEATURES OF THE MICROSCOPE CAMERAHigh-quality metal housingMany software functions, such as measurement, focus stacking (to overlay multiple shots for increased depth of field), mosaic (to display larger image fields)Image and video capture, including time-lapse functionGood compatibility with various microscopesHigh-speed USB 3.0 connectionModern Sony® IMX226 sensor 7.53mm x 5.64mm (1/1.7'')SYSTEM REQUIREMENTSWindows 10 or 11Intel i3, i5, i7 or i9 processor from 6th generation orAMD Ryzen processorOptical drive or internet connection for software downloadUSB 3.0, 3.1SCOPE OF DELIVERY OF THE MICROSCOPE CAMERACamera headUSB 3.0 cable23.2 mm adapter, 30 mm and 30.5 mmCapture and image editing software (for Windows)

The BRESSER Science ETD-201 is a high-quality stereo reflected-light and transmitted-light microscope. It is perfectly qualified for medical applications, the use in agriculture and forestry, in criminology, in academic and scientific institutes and schools, as well as for the assembly and quality assurance of components in precision mechanics and electronic engineering. The extra wide foot with stage and exceptionally tall height range permit observations of large objects. The integrated reflected- and transmitted-light illumination can be used in combination and is dimmable. The angle of incidence can be user-friendly adjusted and locked in position. A continuous range of magnification from 8x to 50x is possible with the exchangeable wide field eyepieces (WF 10x) and the 6.25-times stereo zoom objective lens (0,8x-5x).The interpupillary distance and dioptre compensation can be adjusted individually. The trinocular microscope head is rotatable (360°) and comes with two 45° inclined eyepiece tubes and a separate camera tube for the attachment of a c-mount camera or MikroCam.SCOPE OF DELIVERYMicroscope zoom headMicroscope stand2x eyepiece (WF 10x)Glass platePlastic plate (black & white)Dust coverManual

The BRESSER JUNIOR refracting telescope 50/360 with tent lets you start your exciting journey of discovery across the night sky from your own little astro corner. The achromatic refractor telescope is set up and ready for your first astronomical observations in no time. Due to the azimuthal mount it’s child's play to operate: simply swing the telescope to the left and right, up and down, until your target object appears in the field of view. Explore celestial eye-catchers comfortably through the children's telescope Look forward to exciting views of the lunar surface, the famous Orion Nebula or the impressive Pleiades. Using the eyepieces included in this telescope set, you can admire these and many other astronomical objects at 18x and 60x magnification. The zenith mirror always ensures a pleasant view during your celestial observations, because it allows you to look comfortably into your telescope for children from above. Children's telescope – with astro tent for exciting adventures Assembled in no time at all, the stylish tent in BRESSER Family design provides the right atmosphere for your space explorations. Flora, Lukas and Luna will be happy to share exciting moments with you during your new hobby. The tent with its dimensions of 100 x 100 x 130 cm also offers plenty of space for you to include a friend in your planning your next observations. Meanwhile you can always keep an eye on your surroundings from inside the sturdy tent thanks to the two round windows. Great fun for little astronomy beginners: explore the wonders of the universe on your own with the BRESSER Family and the BRESSER JUNIOR telescope with tent. FEATURES Telescope for children aged 8 and above Type: achromatic refractor Easy operation due to azimuthal mount Lens diameter: 50 mm Focal length: 360 mm Magnification: 18x and 60x Star diagonal mirror for comfortable observations Incl. tent in BRESSER Family astro-design (suitable for indoor use only) SCOPE OF DELIVERY Telescope Tripod with azimuthal mount Star diagonal mirror 2 Eyepieces (20 mm; 6 mm) Tent Instruction manual