Nexcope NIB620 professional, inverted laboratory microscope with phase contrast

The NEXCOPE NE930 microscope offers excellent optical performance and ease of use, and is ideal for scientific tasks. Thanks to its cutting-edge optical quality, it is ideal for science and research applications, as well microbiological quality control or diagnostics. LENSES The panchromatic lenses ensure a flat field of view. The backwards-tilted, motorized 6x nosepiece is equipped with high-quality infinity lenses (4x, 10x, 20x, 40x, 100x oil). These feature an M25 thread and a parfocal length of 60 mm. The 40x and 100x lens has a spring-loaded protection mechanism. EYEPIECES The ergonomic eyepiece head can be tilted between 0° and 35°. This allows the microscope to be adjusted to the user’s seating position. The eyepieces’ large 25 mm field of view allows you to view a very wide area. The high eyepiece head is ideal for spectacle wearers. A rubber edge provides protection upon eye contact. A dioptre compensation of -5 to +5 can be set individually for each eyepiece. The interpupillary distance can be adjusted between 47 mm and 78 mm. ILLUMINATION The powerful 3 W LED has an adjustable brightness and provides optimal illumination. The brightness can be adjusted individually and saved for each lens. The swing-top condensor is automatically adjusted to the selected lens. MECHANICS + AUTOMATION The large XY stage features a robust, chemical-resistant insert made from Gorilla Glass and is moved via a combination of a toothed rack drive and a wire rope hoist. This enables exact positioning for high magnifications. The height of the control knobs can be adjusted to ensure an ergonomic setup. The tension can also be adjusted. Specimens can be conveniently changed with one hand. In addition to the coarse focus, the fine focus helps to render a very sharp image of the object. A full turn of the fine focus moves the table by 0.2 mm. The fine focus can be adjusted with one finger on the right-hand side. The table height limit helps to protect the specimens. The friction of the coarse focus can also be adjusted. The fine focus knobs are held in place magnetically and can be replaced as needed. The lenses are switched via a motor at the touch of a button. The next lens can be moved via a selection switch, or a specific lens can be selected on the front panel. The illumination and the position of the condensor is automatically adjusted to the selected lens. These features ensure ergonomic, fatigue-free and efficient performance. The exact reproducibility of the settings also offers advantages for photomicrography, as the images do not need to be recalibrated / flats do not need to be reproduced each time the lens is changed. CAMERA CONNECTION The NEXCOPE NE930 is specially designed for use with C-mount cameras. You can choose from two different adapters, depending on the sensor size and desired field of view: 0.5x c-mount adapter for sensor sizes up to 2/3’’ 1x c-mount adapter for sensor sizes of 1’’ As the adapter can be adjusted, the camera image can always be exactly matched parfocally to the eyepieces. ACCESSORIES (optional) Dark field condenser (dry or oil) Phase contrast Differential interference contrast (DIC)Fluorescence Polarisation FEATURES Professional, motorised transmitted light microscope Lens type: Planachromatic (60 mm parfocal length) Precise mechanics Outstanding expandability Bright LED illumination WHAT’S INCLUDED Microscope stand with five planachromatic lenses (4x, 10x, 20x, 40x, 100x oil) One pair of 10x eyepieces (field of view: 25 mm, Plug-in diameter: 30 mm), diopter adjustmentDust protection cover Mains cable

The NIB 630 is the flagship of the NIB600 series of inverted microscopes. With such an inverted design, the device enables the microscopy of plankton, microalgae and cell cultures. Cell cultures can be examined directly in the culture vessel without taking samples. For particularly easy sample handling, it is equipped with a tiltable lighting unit. This means that even tall vessels can be placed comfortably without bumping against the lighting unit. The microscope head is equipped with a height-adjustable ergo viewing head. This allows users of different heights to adjust the microscope to a comfortable and ergonomic viewing height with a single hand movement. This special microscope is used in water management offices, research institutes and universities, in human and veterinary medicine, agriculture, marine biology, limnology, aquaculture and many more. The integrated display informs you at any time about the selected magnification and the status of the illumination as well as the ECO mode. The brightness can be programmed for each objective so that there is no need to readjust when changing magnification and the user is not blinded. OBJECTIVE The NEXCOPE NIB630 microscope is equipped with a quintuple nosepiece. A 4x planachromatic objective and one each of 10x, 20x and 40x planachromatic phase contrast objectives are included. The condenser has a numerical aperture of 0.3 and an extra long working distance. The objectives are calculated for a soil thickness of 1.2 mm. Please use appropriate culture vessels. The universal specimen holder is suitable for standard slides. EYEPIECES The eyepieces have a field of view of 22 mm. This gives you a very large field of view. The high eye point makes them very comfortable even for spectacle wearers. A rubber edge protects against scratches on contact. Dioptric compensation from -5 to +5 can be individually adjusted for each eyepiece. The interpupillary distance can be adjusted between 48 mm and 75 mm. The binocular can be tilted up and down to adjust the viewing height. ILLUMINATION The Koehler illumination provides the best possible light guidance of the microscopy light. This avoids stray light and only illuminates the just visible area in the specimen. This protects sensitive living specimens from excessive light irradiation. The powerful 3W LED can be adjusted in brightness and ensures optimal illumination. The brightness can be adjusted individually for each objective. If an objective is changed, the NEXCOPE NIB630 automatically adjusts the previously set brightness. The display shows the currently selected lens and the current brightness. The tiltable lighting unit makes it easier to work with taller sample vessels. The adjustable condenser with extra-long working distance enables quick readiness for use. MECHANICS In addition to coarse focusing, fine focusing helps to bring the specimen into focus very precisely. A full turn of the fine focusing knob moves the stage up or down by 0.2 mm. On the right side, the fine focus can be adjusted with a finger. The friction of the coarse focusing can also be varied. The fine focusing knobs are held magnetically and can be mounted on the left or right. The XY stage offers the possibility of inserting various holders. This allows slides or even petri dishes to be inserted. CAMERA CONNECTION The NEXCOPE NIB630 is specially designed for use with C-mount cameras. The camera connection is located on the side and has a switch between visual observation and camera (100/0 or 0/100). You can choose from two different adapters, depending on the sensor size: 0.5x C-mount adapter 1x C-mount adapter (already included in the scope of delivery) ACCESSORIES (optional) Hoffman Modulation Contrast Relief 3D contrast Terasaki holder, Petri dish holder 54 mm and 90 mm Camera adapter for C-mount 0.5x FEATURES Professional inverted transmitted light microscope Type of objectives: infinity plan achromatic (60 mm adjustment length, M25) Precise mechanics Very bright illumination SCOPE OF DELIVERY Inverted transmitted light microscope 4x objectives, of which 10x, 20x and 40x as phase contrast objectives Filter slider for phase contrast Universal sample holder Centering telescope for phase contrast

The powerful combination set with the professional Science ADL-601P microscope, the high-performance MikroCam PRO HDMI Autofocus, and the matching screen offers a comprehensive solution for demanding brightfield and darkfield observations. Ideal for modern laboratory use, it enables comfortable live display, precise analyses, and efficient documentation – perfect for research and quality control.The Microscope in DetailThe BRESSER Science ADL 601 P is a professional brightfield and darkfield microscope. The microscope base contains a halogen transmitted light illumination (20 W) as well as the power supply and the two continuously adjustable dimmers for brightfield and darkfield. The two trinocular microscope heads combine both illumination functions, as well as the possibilities for photography and binocular observation; the inclination of the eyepiece tubes is 30°. With the polarization attachment, material science or apparatus technical investigations can be carried out in research, teaching, and production. The halogen brightfield illumination (20 W), which goes through the objective onto the specimen, can be modified for special applications using a color filter wheel and a polarizer/analyzer combination. Overall, the BRESSER Microscope Science ADL 601P is a uniquely priced instrument that also features the further equipment typical for high-quality microscopes: four-objective turret, cross table with transverse and longitudinal movement, coaxial focusing drives (fine: 200 µm/revolution), inter-pupillary distance and diopter adjustment, as well as a photo tube. Optional general accessories include wide-field eyepieces (WF10x, WF16x), measuring eyepiece (WF10x), various plan achromatic DIN objectives (e.g., 4x, 5x, 10x, 20x, 40x spring-loaded, 60x spring-loaded, 100x-oil spring-loaded), the Abbe condenser (numerical aperture 1.25; with iris diaphragm and additional lens), darkfield condensers (dry and oil), immersion oil, and a phase contrast device.The Science ADL-601P combines a biological transmitted light microscope with a brightfield microscope. This also allows for the examination of surfaces at the highest resolution!SCOPE OF DELIVERY MICROSCOPEMicroscopeEyepieces (pair DIN WF 10x)Objectives (PL5x, PLL10x, PLL40x, PLL60x)Abbe condenser (1.25 with iris diaphragm)The Microscope Camera in DetailThe BRESSER MikroCam PRO HDMI Autofocus impresses with its excellent image quality while being user-friendly. It delivers the microscope image live and without delay as an HDMI signal with Full HD resolution to a monitor or TV. An optional 11'' HDMI monitor (Art. No. 5914110) can be directly mounted on the camera and provides brilliant and high-contrast images. Due to its very high light sensitivity, good image quality is ensured even in low light. This model is especially recommended for darkfield or phase contrast.The autofocus allows for optimal focusing of the camera without using the microscope's focusing wheels. This ensures parfocality on various trinocular microscopes. The focusable range extends from the 0 position, corresponding to the C-Mount distance, over a maximum forward focus of 5.4 mm, thus also reaching the CS-Mount distance and additionally up to 10.6 mm inward to cover an even larger range. Besides autofocus, the camera can also be manually focused using a mouse. A focus adjustment to a specific area is also possible.The operation of the camera functions is done via mouse directly on the screen menu. Measurements can be performed via the screen menu, turning your microscope with the MikroCam Pro HDMI Autofocus into a fully-fledged digital measuring microscope.The MikroCam PRO HDMI Autofocus offers a variety of applications, including:DocumentationEvaluationAnalysisPresentationQuality controlAutomationMachine visionThus, the MikroCam PRO Autofocus is excellently suited as an industrial camera with a very good price-performance ratio.Additionally, the camera can also provide the microscope view in a wireless network via WiFi module. If the camera is connected via HDMI, images and videos can be recorded directly on an SD card (not included). However, a connection to the PC via USB is no longer provided for this model. For this purpose, we recommend the MikroCam Pro HDMI model 5914180.FEATURES OF THE MICROSCOPE CAMERAHDMI connection for monitor or TVBrilliant image reproduction in Full HD via HDMI (60 frames/sec) or WiFi (up to 25 frames/sec)Measurement function via screen menu (*Object micrometer Art. No. 5916720 for calibration necessary)Function for increased dynamic range (WDR)Saving images and videos on SD card (not included) max. 32 GBLarge focus range: -5.4 mm to 0 (C-Mount distance) to 10.6 mm1/4" tripod thread e.g. for a photo tripodC-Mount thread: for easy adaptability, also suitable for C-Mount objectivesSYSTEM REQUIREMENTSWindows 10 or 11Intel i3, i5, i7 or i9 processor from 6th generation orAMD Ryzen processorOptical drive or internet connection for software downloadUSB 2.0SCOPE OF DELIVERY MICROSCOPE CAMERACamera headHDMI cableUSB mousePower supplyWiFi antennaRecording and image processing software (for Windows)The Display in DetailThe Full HD display is the ideal complement to the BRESSER MikroCam Pro HDMI and MINI HDMIThe display can be directly mounted on the camera with an adjustable holder. The screen delivers brilliant images without artifacts, as the display has the same resolution as the output image of the camera. With the set of MikroCam and HDMI display, almost any trinocular microscope with camera connection can be upgraded to a digital microscope. Thus, observation can be done independently of a PC.The size of the display is optimally chosen so that the microscope user can microscope as usual and view the image simultaneously on the monitor. The display provides optimal image quality with a large viewing angle of 178°! Thus, several people can also view the image without loss of quality.The image from the microscope camera is displayed on the HDMI screen always without delay and with a high refresh rate of 60 FPS. The representation via HDMI microscope camera on an HDMI monitor is therefore usually of better quality than using a USB camera on a laptop or PC. This is particularly advantageous when work under microscopic control is to be carried out.Many users also benefit from the improved ergonomics when the image can be viewed on the HDMI display. Especially higher magnifications with their high numerical aperture are uncomfortable for eye problems such as floaters. Digital viewing can provide relief here.The display can be operated with the included Y-cable using the same power supply as the camera. A suitable, short, angled HDMI cable is also included, so that cable clutter at the workplace is avoided. The mounting on a MikroCam PRO or MINI is done using two screws. Screws and tools are included.FEATURES DISPLAY16:9 Full HD monitor with a resolution of 1920 x 1080 pixelsActive area: 16.5 x 29.4 cmEasy mounting directly on a MikroCam PRO or MINILarge viewing angle (178°)No separate power supply neededSCOPE OF DELIVERY13.3" displayHDMI cableY-cable for power supply via camera power supplyMounting screws (2 pieces)Hex keyUser manual

NOTE: This item is a used or returned product. This means: The item may show slight signs of use; some accessories may be missing; the packaging may differ from the original packaging. Please note that refurbished items generally come with a 12-month warranty.

The BRESSER BioScience is the perfect instrument for laboratory use. The size and ergonomic design is perfect for prolonged use. The Köhler Illumination System provides a brilliant image quality. The trinocular tube will connect a MicroCam or other C-Mount microscope camera directly with the optional C-Mount adapter 5942101. An optional adapter (5942100) for DSLR and system cameras is also available. The standard bright field illumination (30W halogen) ensures a pleasant and differentiated colour rendering and is also bright enough for contrasting method like phase contrast and dark field (optional)FEATURESKöhler Iluminatorseparate AC-adapter, for high safetycoaxial mechanical desk with nonius scalecoarse and fine focusing Eyepiece: 2x WF 10x/18 (23 mm diameter)4 Objectives with DIN 4x / 10x / 40x / 100x (oil) magnificationType of objective: AchromaticAbbe N.A. 1.25 CondenserIllumination: 12V/ 30W halogen with dimmerSCOPE OF DELIVERYmicroscopedust cover2x eyepiece4x DIN objectives1x condenserimmersion oil230V power supply (12V/ 3A)

A versatile combination set consisting of the Researcher Bino microscope and MikroCam SF UHD camera – optimal for school, hobby, and profession. The robust Researcher Trino microscope impresses with its binocular view and allows for comfortable, precise work with clear, detailed images. Together with the MikroCam SF UHD camera, which can be directly mounted on the trinocular connection, observations can be conveniently captured digitally, displayed on a computer, and secured for presentations or analyses – ideal for use in education, leisure, or professional applications.The Microscope in DetailThe BRESSER Researcher Trino Microscope is the best-selling BRESSER transmitted light microscope in the mid-price range due to its unbeatable price-performance ratio. It already provides impressive insights into the microcosm. The microscope image is sharp and high-contrast. With its solid metal body and wide magnification range of 40x-1000x, based on 4 objectives and a (replaceable) pair of eyepieces, the BRESSER Researcher meets high demands. The 40x and 100x objectives are spring-loaded to prevent damage, and the 100x objective can be used for oil immersion microscopy (immersion oil is included). The bright LED illumination is adjustable with a dimmer. The Abbe condenser is height-adjustable and centring, and equipped with an iris diaphragm. For perfect sharpness adjustment, coarse and fine focus are available, and for precise positioning of the specimen, a coaxial stage. The 360° rotatable binocular head allows for individual adjustment of the interpupillary distance and diopter compensation between the observer's eyes.Instead of a binocular head, the Trino Researcher has a trinocular head. This allows the user to observe with both eyes while simultaneously connecting a camera or PC eyepiece. Cameras from the MikroCam SP series and the MikrOkular Full HD can be used without further adapters. The trinocular tube can be set to be parfocal with the eyepieces.For special contrast methods, the Researcher Microscope can be upgraded with a dark field condenser (dry or oil). The Researcher Trino is thus the most affordable trinocular microscope that offers this possibility.Examination Objects (Example):BloodRotifers / Wheel AnimalculesBacteriaParasitesPlants (thin sections)AlgaeSCOPE OF DELIVERY MICROSCOPETrinocular microscope1 pair of DIN eyepieces WF 10x with 23mm diameter4-fold objective turret4 DIN objectives: 4x/0.1, 10x/0.25, 40x/0.65, 100x/1.25 oilCondenserCross table with Nonius scaleFine and coarse focusImmersion oilThe Microscope Camera in DetailThe BRESSER MikroCam SF cameras are excellent for capturing photos and videos with a microscope. This allows observations of objects to be easily documented and shared with others. The high frame rate of the MikroCam SF series enables the creation of videos with a smooth image flow. The built-in Sony sensors provide good image quality, colour reproduction, and dynamics.The included software supports the following languages: German, English, French, Spanish, Italian, Polish, Turkish.The MikroCamLabII software offers a wide range of functions. Essential functions (e.g., exposure time and sensitivity) can be controlled automatically or manually.Very convenient are the functions for so-called focus stacking (for high depth of field) and the creation of a mosaic or panorama. These two functions can be performed with a previously recorded image series or directly from the live view. The creation of sharp images using live focus stacking (EDF) is possible with the MikroCamLabII software in just a few minutes. While you focus on the microscope, the software gradually builds the finished, completely sharp result image without further intervention. This way, you get impressive, sharp image results in no time.The measurement function* included in the software helps you determine sizes or display a scale. You can measure distances, angles, or areas with just a few clicks. Extensive functions support you in measuring circles with area and radius or even complex polygons.Measurements can be performed in the captured image or in the live image. The MikroCamLabII software also has extensive algorithms for automated image analysis, e.g., for particle counting or area evaluation.The housing features a C-mount connection thread and can therefore be used with microscopes from various manufacturers. We are happy to advise you on which MikroCam is optimally suited for your microscope.For use on devices with a 23.2 mm receptacle, an optional 0.5x reducing optic (Art. No. 5914015 (fixed), Art. No. 5914005 (variable)) is available. For special applications, e.g., with a C-mount objective, the camera can also be mounted on the integrated 1/4" tripod thread.*A suitable measuring tool is required for calibrating the measurement function, e.g.: Art. No. 5916710 or 5916720.FEATURES OF THE MICROSCOPE CAMERA3840x2160 pixel sensor (UHD), 6.22 x 3.5 mm (1/2.5")Frame rate: up to 30 fpsHigh-quality metal housingMany software functions such as measurement, focus stacking (to overlay multiple recordings for increased depth of field), mosaic (to display larger image fields)Image and video recording, including time-lapse functionCompatible with microscopes from all manufacturersSYSTEM REQUIREMENTSWindows 10 or 11Intel i3, i5, i7 or i9 processor from 6th generation or higher orAMD FX or Ryzen processor from 1st generationInternet connection for software downloadMin. USB 2.0SCOPE OF DELIVERY MICROSCOPE CAMERACamera headUSB 2.0 cable (approx. 1.8 m)Adapter for 23.2 mm, 30 mm, and 30.5 mm eyepiece tubesCamLabLite software as a download link, language versions German, English, French, Spanish, Catalan, Italian, Turkish, Russian, Polish, Portuguese, Indonesian, Chinese, Bulgarian

A requirement for phase contrast microscopy are the specially designed apertures to increase the contrast performance. This can achieved by enhancing the bright and dark areas. The background remains bright.SCOPE OF DELIVERYPlan-Achromatic phase contrast objectives (25x, 40x)holder with filters for phase contrast objectives