PLA Filament 1kg for 3D Printer

1kg PLA Filament

  • PLA Filament for 3D printer
  • Length: 340 m
  • Weight: 1000 g / 1 kg
  • Colours: Black, White, Blue, Green, Red, Neutral

€14.99*

% €29.99* (50.02% saved)

Available, delivery time: 1-3 days

Colour
Product number: 2080210B4K000
EAN: 4007922068572
WEEE-Reg.-Nr.: DE 34323861
Product information "PLA Filament 1kg for 3D Printer"
The Bresser PLA filament material is manufactured with a diameter tolerance of ± 0.2 mm as standard, which allows the use not only for the Bresser 3D printer but also for any third party printer supporting PLA material with a 1.75 mm diameter. Already during the production the material is monitored for the smallest impurities and therefore you always get the same consistent quality results. Basic colours: blue, green, black, red, white, neutral. For optimal processing of the PLA material during printing, we recommend an extruder processing temperature between 190 and 220 degrees C. The optimum printing speed is between 60 and 90 mm/s. We recommend heating the building platform to 40-50 degrees. Please make sure that the printer fan is working properly and that the appropriate cleaning filter is accurately installed. Create a large variety of different looking objects using our BRESESR PLA filament materials.

Properties of PLA: 
  • Biodegradable 
  • low melting point 
  • odourless 

Scope of delivery
  • 1 kg PLA Filament in your chosen colour
Colour: green
Material: SILK-PLA-Filament
Warning Note 1: Fire risk: The nozzle and heated bed of the 3D printer can reach extremely high temperatures during operation. Avoid direct contact with these parts to prevent burns.
Warning Note 2: Risk of inhaling fumes: Some filaments may release fumes when heated. Always use the filament in a well-ventilated area. If irritation occurs, stop printing and immediately improve ventilation.
Warning Note 3: Fire risk: Store the filament away from open flames, heat sources, and direct sunlight. DO NOT exceed the recommended printing temperature, as this may cause overheating or fire.
Warning Note 4: Suffocation risk: Keep filament spools and small packaging materials out of the reach of children to avoid suffocation risk.
Warning Note 5: Proper use: This filament is only intended for 3D printing purposes. Do NOT use it for applications involving food, medical devices, or products intended for human consumption, unless explicitly stated as food-safe.
Warning Note 6: Mechanical risk: Keep hands, hair, and loose clothing away from moving parts during operation to avoid entanglement or injury.
Warning Note 7: Store the filament in a cool, dry place. Use airtight containers or resealable bags with desiccants to prevent moisture absorption, which could affect the print quality.
Warning Note 8: Disposal: Dispose of used or damaged filament in accordance with local regulations. Do not burn the filament, as toxic fumes may be released.
Warning Note 9: Allergy warning: Some filaments may contain materials that can trigger allergic reactions. If skin irritation or other symptoms occur, discontinue use immediately and consult a doctor if necessary.
Warning Note 10: Failure to comply with these safety regulations may result in personal injury, damage to the printer, or poor print quality. Always read the entire manual before use.

Produkt- und Sicherheitshinweise


Manufacturer: 
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede

Contact: 
www.bresser.de


Customers also bought

%
PLA Filament 1kg for 3D Printer
The Bresser PLA filament material is manufactured with a diameter tolerance of ± 0.2 mm as standard, which allows the use not only for the Bresser 3D printer but also for any third party printer supporting PLA material with a 1.75 mm diameter. Already during the production the material is monitored for the smallest impurities and therefore you always get the same consistent quality results. Basic colours: blue, green, black, red, white, neutral. For optimal processing of the PLA material during printing, we recommend an extruder processing temperature between 190 and 220 degrees C. The optimum printing speed is between 60 and 90 mm/s. We recommend heating the building platform to 40-50 degrees. Please make sure that the printer fan is working properly and that the appropriate cleaning filter is accurately installed. Create a large variety of different looking objects using our BRESESR PLA filament materials.Properties of PLA: Biodegradable low melting point odourless Scope of delivery: 1 kg PLA Filament in your chosen colour

€14.99* €29.99* (50.02% saved)

Customers also viewed

%
PLA Filament 1kg for 3D Printer
The Bresser PLA filament material is manufactured with a diameter tolerance of ± 0.2 mm as standard, which allows the use not only for the Bresser 3D printer but also for any third party printer supporting PLA material with a 1.75 mm diameter. Already during the production the material is monitored for the smallest impurities and therefore you always get the same consistent quality results. Basic colours: blue, green, black, red, white, neutral. For optimal processing of the PLA material during printing, we recommend an extruder processing temperature between 190 and 220 degrees C. The optimum printing speed is between 60 and 90 mm/s. We recommend heating the building platform to 40-50 degrees. Please make sure that the printer fan is working properly and that the appropriate cleaning filter is accurately installed. Create a large variety of different looking objects using our BRESESR PLA filament materials.Properties of PLA: Biodegradable low melting point odourless Scope of delivery: 1 kg PLA Filament in your chosen colour

€14.99* €29.99* (50.02% saved)
PLA Filament 500g for 3D Printer
The Bresser PLA Filament material is manufactured with a diameter tolerance of ± 0.05 mm, which not only makes it usable for the Bresser 3D printers but also non Bresser brands which support filament diameters of 1.75mm.Dirt particles are carefully removed during the production stage, always giving you the same results in our PLA filaments.Available colours are: black, white, red, blue, green, neutralWe recommend a extruder print temperature of 190 to 220 degrees in order to properly utilize the PLA filament. The optimum print speed should be set between 60 to 90 mm/s, while we recommend the building plate to be heated to 40-50 degrees C. PLA Features:biodegradable, low melting point, odourlessFEATURES:The selection of different colours allow you to create various 3D pieces of art.SCOPE OF DELIVERY:PLA Filament

From €8.79*