PLA Filament
- PLA Filament for 3D Printer
- Length: 170m
- Weight: 500g
- Colours: blue, green, black, red, white, neutral
- 1.75mm diameter
€19.99*
Unfortunately, no longer available
Product number:
2080200CM3000
EAN:
4007922063881
WEEE-Reg.-Nr.:
DE 34323861
Product information "PLA Filament 500g for 3D Printer"
The Bresser PLA Filament material is manufactured with a diameter tolerance of ± 0.05 mm, which not only makes it usable for the Bresser 3D printers but also non Bresser brands which support filament diameters of 1.75mm.
Dirt particles are carefully removed during the production stage, always giving you the same results in our PLA filaments.
Available colours are: black, white, red, blue, green, neutral
We recommend a extruder print temperature of 190 to 220 degrees in order to properly utilize the PLA filament. The optimum print speed should be set between 60 to 90 mm/s, while we recommend the building plate to be heated to 40-50 degrees C.
PLA Features:
biodegradable, low melting point, odourless
FEATURES:
The selection of different colours allow you to create various 3D pieces of art.
SCOPE OF DELIVERY:
PLA Filament
Dirt particles are carefully removed during the production stage, always giving you the same results in our PLA filaments.
Available colours are: black, white, red, blue, green, neutral
We recommend a extruder print temperature of 190 to 220 degrees in order to properly utilize the PLA filament. The optimum print speed should be set between 60 to 90 mm/s, while we recommend the building plate to be heated to 40-50 degrees C.
PLA Features:
biodegradable, low melting point, odourless
FEATURES:
The selection of different colours allow you to create various 3D pieces of art.
SCOPE OF DELIVERY:
PLA Filament
| Batteries included: | No |
|---|---|
| Batteries required: | No |
| Colour: | blue |
| Extended warranty (years): | 5 |
| Material: | SILK-PLA-Filament |
| Total length (mm): | 170000 |
| Water-repellent: | No |
| Waterproof 8): | No |
Product and safety instructions
Manufacturer:
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede
Contact:
www.bresser.de
www.bresser.de
Warning notes
- Fire risk: The nozzle and heated bed of the 3D printer can reach extremely high temperatures during operation. Avoid direct contact with these parts to prevent burns.
- Risk of inhaling fumes: Some filaments may release fumes when heated. Always use the filament in a well-ventilated area. If irritation occurs, stop printing and immediately improve ventilation.
- Fire risk: Store the filament away from open flames, heat sources, and direct sunlight. DO NOT exceed the recommended printing temperature, as this may cause overheating or fire.
- Suffocation risk: Keep filament spools and small packaging materials out of the reach of children to avoid suffocation risk.
- Proper use: This filament is only intended for 3D printing purposes. Do NOT use it for applications involving food, medical devices, or products intended for human consumption, unless explicitly stated as food-safe.
- Mechanical risk: Keep hands, hair, and loose clothing away from moving parts during operation to avoid entanglement or injury.
- Store the filament in a cool, dry place. Use airtight containers or resealable bags with desiccants to prevent moisture absorption, which could affect the print quality.
- Disposal: Dispose of used or damaged filament in accordance with local regulations. Do not burn the filament, as toxic fumes may be released.
- Allergy warning: Some filaments may contain materials that can trigger allergic reactions. If skin irritation or other symptoms occur, discontinue use immediately and consult a doctor if necessary.
- Failure to comply with these safety regulations may result in personal injury, damage to the printer, or poor print quality. Always read the entire manual before use.
Skip product gallery
Accessories
%
BRESSER Replacement HEPA air filter for 3D Printer REX (item no. #2010100)
€9.99*
€15.99*
(37.52% saved)
The BRESSER Replacement HEPA air filter for the BRESSER 3D printer 2010100, as well as compatible for the Flashforge Adventurer 3.
Available
Skip product gallery
Customers also viewed
%
BRESSER Universal Power Supply 230/12V, 3.0A
€39.00*
€59.00*
(33.9% saved)
Versatile wall adapter for all telescopes with 12V. Suitable for BRESSER MCX 102/127 Goto Telescope, BRESSER EXOS II Goto Mount, BRESSER Automatik 80/400 Telescope, National Geographic 70mm/90mm Goto Telescope etc.
FEATURESInput: 100-240 V ~ 60/50HzOutput: 12 V DC 3000 mAjack plug 2.5/5.5mm
SCOPE OF DELIVERYBRESSER Universal Power Supply
Available
BRESSER Additional / Spare Base Station for Weather Station 7003100CM3000/700100GYE000/7003100HZI000
From
€10.00*
NOTE: This base station is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.7002582700258670026207003100CM30007003100GYE0007003100HZI0007003100QT500070033007003600CM30007003600GYE0007003600QT5000908060070031000000007003600000000
Fancy sharing your personally recorded weather data with your neighbours? Or do you need a replacement base station because yours didn’t quite survive the last house move – or the children’s enthusiastic games of tag? Whether you’re upgrading your setup or replacing a unit, this base station brings all the features of your existing weather station straight back to your screen in no time.FEATURES
Receives weather data from 7-in-1 outdoor sensor for ClimateScout Weather Station via 868 MHz RF transmission frequency
Clear, professional display with time and comprehensive weather information
Integrated sensor for indoor temperature (°C/°F), humidity and air pressure with air pressure trend (24 hours)
Room climate indicator
Maximum and minimum value alarm
Automatic cycle mode displays the different channels from additional sensors (not included) in 4-second intervals
DCF time synchronisation (Central European Time, time delay can be set for use in other time zones), automatically switches between winter and summer time
Alarm with snooze function and frost warning
Time, calendar, day of the week and moon phase display
Min./max. memory (up to 24 hours)
Backlight
Displays the graphical weather trend (12 hours)
Displays the outdoor temperature (°C/°F), humidity, air pressure, UV index and light intensity (Klux, Kfc, W/m2)
Displays the Beaufort index (scale for measuring wind speed)
Displays rainfall data: hourly, daily, weekly, monthly, total precipitation (in/mm) - with indicator
Weather index display for dewpoint, windchill factor and heat index
Displays day of the week and wind direction in 5 languages EN/DE/FR/ES/IT)
Can be wall-mounted or placed on desktop
Base station dimensions: 180 x 135 x 22 mm (W x H x D)
Display size: 125 x 77 mm (W x H)
Power supply: 4x AA (not included)
DELIVERY CONTENT
Additional base station
External sensor not included!
Instruction manual
Available
