PLA Filament 500g for 3D Printer
PLA Filament
- PLA Filament for 3D Printer
- Length: 170m
- Weight: 500g
- Colours: blue, green, black, red, white, neutral
- 1.75mm diameter
€19.99*
Currently not available
Product number:
2080200GYE000
EAN:
4007922063898
WEEE-Reg.-Nr.:
DE 34323861
Product information "PLA Filament 500g for 3D Printer"
The Bresser PLA Filament material is manufactured with a diameter tolerance of ± 0.05 mm, which not only makes it usable for the Bresser 3D printers but also non Bresser brands which support filament diameters of 1.75mm.
Dirt particles are carefully removed during the production stage, always giving you the same results in our PLA filaments.
Available colours are: black, white, red, blue, green, neutral
We recommend a extruder print temperature of 190 to 220 degrees in order to properly utilize the PLA filament. The optimum print speed should be set between 60 to 90 mm/s, while we recommend the building plate to be heated to 40-50 degrees C.
PLA Features:
biodegradable, low melting point, odourless
FEATURES:
The selection of different colours allow you to create various 3D pieces of art.
SCOPE OF DELIVERY:
PLA Filament
Dirt particles are carefully removed during the production stage, always giving you the same results in our PLA filaments.
Available colours are: black, white, red, blue, green, neutral
We recommend a extruder print temperature of 190 to 220 degrees in order to properly utilize the PLA filament. The optimum print speed should be set between 60 to 90 mm/s, while we recommend the building plate to be heated to 40-50 degrees C.
PLA Features:
biodegradable, low melting point, odourless
FEATURES:
The selection of different colours allow you to create various 3D pieces of art.
SCOPE OF DELIVERY:
PLA Filament
| Batteries included: | No |
|---|---|
| Batteries required: | No |
| Colour: | blue |
| Extended warranty (years): | 5 |
| Material: | SILK-PLA-Filament |
| Total length (mm): | 170000 |
| Water-repellent: | No |
| Waterproof 8): | No |
Product and safety instructions
Manufacturer:
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede
Contact:
www.bresser.de
www.bresser.de
Warning notes
- Fire risk: The nozzle and heated bed of the 3D printer can reach extremely high temperatures during operation. Avoid direct contact with these parts to prevent burns.
- Risk of inhaling fumes: Some filaments may release fumes when heated. Always use the filament in a well-ventilated area. If irritation occurs, stop printing and immediately improve ventilation.
- Fire risk: Store the filament away from open flames, heat sources, and direct sunlight. DO NOT exceed the recommended printing temperature, as this may cause overheating or fire.
- Suffocation risk: Keep filament spools and small packaging materials out of the reach of children to avoid suffocation risk.
- Proper use: This filament is only intended for 3D printing purposes. Do NOT use it for applications involving food, medical devices, or products intended for human consumption, unless explicitly stated as food-safe.
- Mechanical risk: Keep hands, hair, and loose clothing away from moving parts during operation to avoid entanglement or injury.
- Store the filament in a cool, dry place. Use airtight containers or resealable bags with desiccants to prevent moisture absorption, which could affect the print quality.
- Disposal: Dispose of used or damaged filament in accordance with local regulations. Do not burn the filament, as toxic fumes may be released.
- Allergy warning: Some filaments may contain materials that can trigger allergic reactions. If skin irritation or other symptoms occur, discontinue use immediately and consult a doctor if necessary.
- Failure to comply with these safety regulations may result in personal injury, damage to the printer, or poor print quality. Always read the entire manual before use.
Skip product gallery
Accessories
%
BRESSER Replacement HEPA air filter for 3D Printer REX (item no. #2010100)
€10.00*
€15.99*
(37.46% saved)
The BRESSER Replacement HEPA air filter for the BRESSER 3D printer 2010100, as well as compatible for the Flashforge Adventurer 3.
Available
