Blocks the light in the UV and IR waveband and thus improves image sharpness in lunar and planetary photography
- BRESSER UV + IR Cut Filter for Photography
- Invisible light in the UV and IR waveband is blocked
- Lets pass only visible light in the range 400 - 680 nm
- Lunar and planetary images become even sharper
- Suitable for BRESSER CMOS cameras and others
- Quick and easy filter mounting
- C-Mount internal thread for mounting further accessories
- Glass filter made of fine optical glass ; Plane-parallel polished and multiple layer coated
- Filter housing made of matt black anodized aluminum
- Housing outer diameter 31.7 mm (1.25 inch) ; Diameter of free light transmission 17.0 mm (1.25 inch)
€16.33*
% €29.00* (43.69% saved)Currently unavailable
Product number:
R11069
Former product no.:
R4959030
Note: Our item numbers have been updated.
You can continue to search for products using either the previous or the new item number.
EAN:
4007922072982
WEEE-Reg.-Nr.:
DE 34323861
Product information "Planetary UV + IR Cut Filter for BRESSER CMOS Cameras (Refurbished)"
NOTE: This item is a used or returned product. This means: The item may show slight signs of use and the packaging may differ from the original packaging. Please note that refurbished items generally come with a 12-month warranty.
The BRESSER UV + IR Cut Filter makes lunar and planetary images even sharper.
Digital astro cameras have a wide sensitivity range that significantly exceeds the spectrum of visible light. Thus, the wavelengths of invisible light in the ultraviolet and infrared are also captured. This leads inevitably to a small additional and of course unwanted blur. The solution is this UV + IR Cut Filter, which allows only light in the visible range 400 nm to 680 nm to pass through and blocks all other wavelengths of light. As soon as these disturbing light waves are cut off, the sharpness of the image and the contrast are increased. Suddenly, details on the surface of Jupiter, for example, can be seen that were previously only barely visible. A clear plus, which can be achieved by this filter.
Suitable for BRESSER CMOS cameras and other manufacturers with female camera thread M30 x 0.75 mm
After removing the original screw adapter with sensor protection glass, the BRESSER UV + IR Cut filter is mounted to the camera instead. This filter has a fine M30 x 0.75 mm external thread for mounting on the camera. The exchange is therefore quick and easy. On the opposite side, i.e. on the telescope side, there is a standard C-mount female thread for mounting other accessories.
Note: This filter does not have a standard 1.25 inch (31.7 mm) filter thread.
FEATURES
SCOPE OF DELIVERY
The BRESSER UV + IR Cut Filter makes lunar and planetary images even sharper.
Digital astro cameras have a wide sensitivity range that significantly exceeds the spectrum of visible light. Thus, the wavelengths of invisible light in the ultraviolet and infrared are also captured. This leads inevitably to a small additional and of course unwanted blur. The solution is this UV + IR Cut Filter, which allows only light in the visible range 400 nm to 680 nm to pass through and blocks all other wavelengths of light. As soon as these disturbing light waves are cut off, the sharpness of the image and the contrast are increased. Suddenly, details on the surface of Jupiter, for example, can be seen that were previously only barely visible. A clear plus, which can be achieved by this filter.
Suitable for BRESSER CMOS cameras and other manufacturers with female camera thread M30 x 0.75 mm
After removing the original screw adapter with sensor protection glass, the BRESSER UV + IR Cut filter is mounted to the camera instead. This filter has a fine M30 x 0.75 mm external thread for mounting on the camera. The exchange is therefore quick and easy. On the opposite side, i.e. on the telescope side, there is a standard C-mount female thread for mounting other accessories.
Note: This filter does not have a standard 1.25 inch (31.7 mm) filter thread.
FEATURES
- BRESSER UV + IR Cut Filter for photography
- Wavelengths of invisible light in ultraviolet and infrared are blocked
- Passes only visible light in the range 400nm to 680nm
- Lunar and planetary images become even sharper
- Suitable for BRESSER CMOS cameras an others
- Male fine thread M30 x 0.75mm for mounting on the camera housing
- C-Mount internal thread for mounting further accessories
- Quick and easy mounting of the filter
- Glass filter made of fine optical glass
- Plane-parallel polished and multiple layer coated
- Filter housing made of matt black anodized aluminum
- Housing outer diameter 31.7mm (1.25 inch)
- Diameter of free light transmission 17.0mm (1.25 inch)
SCOPE OF DELIVERY
- UV + IR Cut Filter (1 pc)
| Batteries required: | No |
|---|
Product and safety instructions
Manufacturer:
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede
Contact:
www.bresser.de
www.bresser.de
Warning notes
- General safety instructions DANGER Risk of suffocation! Improper use of this product can result in suffocation, especially for children. Therefore, carefully observe the following safety instructions. Keep packaging materials (plastic bags, rubber bands, etc.) away from children! There is a risk of suffocation! Keep cords, ribbons, and similar materials away from children! They could accidentally strangle themselves and suffocate! NOTE Risk of material damage! Improper handling can damage the device and/or accessories. Therefore, only use the device according to the following safety instructions. Do not dismantle the device! In the case of a defect, contact your dealer. They will contact the service center and may send the device in for repair. Check the device, cables, and connections for damage before operation. Never operate a damaged device or a device with damaged power-carrying parts! Damaged parts must be immediately replaced by an authorized service provider. For proper operation, only use the supplied cables and connect them as described in the instructions. NOTE Risk of data loss! Never interrupt an existing data connection to the computer before all data has been transferred. Interruptions can lead to data loss, for which the manufacturer accepts no liability!
Skip product gallery
Customers also viewed
%
Planetary UV + IR Cut Filter for BRESSER CMOS Cameras
€23.00*
€29.00*
(20.69% saved)
The BRESSER UV + IR Cut Filter makes lunar and planetary images even sharper.Digital astro cameras have a wide sensitivity range that significantly exceeds the spectrum of visible light. Thus, the wavelengths of invisible light in the ultraviolet and infrared are also captured. This leads inevitably to a small additional and of course unwanted blur. The solution is this UV + IR Cut Filter, which allows only light in the visible range 400 nm to 680 nm to pass through and blocks all other wavelengths of light. As soon as these disturbing light waves are cut off, the sharpness of the image and the contrast are increased. Suddenly, details on the surface of Jupiter, for example, can be seen that were previously only barely visible. A clear plus, which can be achieved by this filter.Suitable for BRESSER CMOS cameras and other manufacturers with female camera thread M30 x 0.75 mmAfter removing the original screw adapter with sensor protection glass, the BRESSER UV + IR Cut filter is mounted to the camera instead. This filter has a fine M30 x 0.75 mm external thread for mounting on the camera. The exchange is therefore quick and easy. On the opposite side, i.e. on the telescope side, there is a standard C-mount female thread for mounting other accessories. Note: This filter does not have a standard 1.25 inch (31.7 mm) filter thread. FEATURESBRESSER UV + IR Cut Filter for photographyWavelengths of invisible light in ultraviolet and infrared are blockedPasses only visible light in the range 400nm to 680nmLunar and planetary images become even sharperSuitable for BRESSER CMOS cameras an othersMale fine thread M30 x 0.75mm for mounting on the camera housingC-Mount internal thread for mounting further accessories Quick and easy mounting of the filterGlass filter made of fine optical glassPlane-parallel polished and multiple layer coatedFilter housing made of matt black anodized aluminumHousing outer diameter 31.7mm (1.25 inch)Diameter of free light transmission 17.0mm (1.25 inch) SCOPE OF DELIVERYUV + IR Cut Filter (1 pc)
Available
