Skip to main content Skip to search Skip to main navigation

Power supply 5V-1A (EU/UK) angled

Help & Service for your product

Here you will find quick help, answers to frequently asked questions, and direct access to support.

Service Portal

Please use our product help search to find answers to your questions. Simply enter the article number or EAN to open the appropriate help page directly.

Service Portal

Sensor Form

In rare cases, a sensor may not work correctly. Using our form, you can quickly send your request to our service team and we will take care of a straightforward solution.

Sensor Form

Ratgeber & Tipps

FAQ - Frequently Asked Questions

The symbol flashes when the air pressure drops sharply within a short period of time. This indicates that a storm or strong winds are very likely approaching. As soon as the air pressure stabilizes, the flashing will stop automatically – it therefore serves as a storm warning.
Please proceed as follows:
  1. Remove all batteries from the base station and the outdoor sensor.
  2. Wait at least 3–10 minutes.
  3. Insert the batteries into the base station.
  4. Once the indoor temperature is displayed, insert the batteries into the outdoor sensor.
The signal should now be detected and the outdoor temperature displayed.

Tips:
  • If problems occur, replace all batteries with fresh, non-rechargeable brand batteries. Different battery types or charge levels may cause interference.
  • Do not place the base station near other electronic devices (this may interfere with reception).
  • If necessary, choose a different location for the base station.
If pressing the “DCF” button on the back does not help, reset the station:
  • Briefly press the reset button on the back with a pen
  • If necessary, place the station closer to a window, as reception inside buildings may be limited

Product and safety instructions


Manufacturer: 
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede

Contact: 
www.bresser.de


Warning notes
  • Safety instructions for power supplies and chargers: Warning! To avoid damage to your device and possible injury, please follow the safety instructions below: Safety measures and instructions: 1. 2. 3. 4. Explanation of risks: Children and teenagers should be educated on the safe use of power supplies (e.g., no moisture, no force, no improper use). Supervision: Children under 14 should be supervised when handling power supplies. Checking the devices: Only use power supplies that are intended for the specific device. Universal power supplies can cause damage if set incorrectly. Storage: Power supplies should be kept out of reach of small children. Instructions for power supplies: Safe handling and use. Power supplies are essential to safely power electrical devices. To avoid damage to devices and hazards like short circuits or overheating, careful handling is important. Here are the general instructions: General safety notes: Use the power supply intended for your device to avoid damage. Do not use power supplies with visible damage to the housing or cables. Keep power supplies away from liquids and damp environments. Ensure sufficient ventilation during operation, and do not cover the power supply. Connecting and operating: Check voltage and power: Ensure that the output voltage and current of the power supply match the device's requirements. For adjustable power supplies, choose the correct setting before connecting. Correct plugging: Plug the power supply into the device first, then into the socket. Always pull on the plug when removing, not the cable. Use only intact sockets. Do not overload power strips. Ensure the cable is safely routed: Lay the cable in a way that there is no tripping hazard or risk of damage. Storage: Store power supplies at room temperature, away from direct sunlight, heat sources, or moisture. Coil the cable loosely to avoid breaks and knots. Special caution with: Universal power supplies: Ensure that the polarity and voltage are correctly set before connecting the power supply. High-power supplies: These can cause overheating or device damage if handled improperly. Older power supplies: Older models without modern protection mechanisms should be regularly checked for defects. Cleaning: Disconnect the power supply from the socket and device before cleaning it. Use a dry, soft cloth. Do not use liquids or chemicals. Disposal: Defective power supplies should not be disposed of in household waste. Take them to a local e-waste collection point. Warning signs: Avoid overload: Do not connect devices that exceed the maximum power of the power supply. Do not use defective power supplies: Replace power supplies with frayed cables or unusual behavior (e.g., humming, overheating) immediately. Do not attempt repairs: Do not open or repair power supplies yourself. This is dangerous and may void the warranty. FAQs: What should I do if the power supply gets hot? Disconnect the power supply from the power source and let it cool down. Check if the ventilation openings are blocked or if the connected device is overloaded. How do I know if I have the correct power supply? Check the output voltage (Volts), current (Amps), and power (Watts). These details can be found on the device or in the manual. Following these instructions will help ensure the safe and long-lasting operation of your power supplies. Always refer to the manufacturer's specific instructions! Improper use can lead to electrical shocks, fires, or other dangers. Therefore, always follow the safety instructions mentioned above.
  • RISK OF SUFFOCATION! Improper use of this product can lead to suffocation, especially in children. Therefore, it is essential to follow the safety information below. Keep packaging materials (plastic bags, rubber bands, etc.) away from children! There is a suffocation risk! This product contains small parts that could be swallowed by children! There is a suffocation risk!
Skip product gallery

Customers also viewed

Power supply 5V-1A (EU/UK) straight
This high-quality spare part will quickly get your weather station working again.IMPORTANT: Is this part compatible with your weather station?This spare part is only compatible with the following devices:14895149931500415013151301524370000237000027700003070025807002581700350070035107003600CM30007003600GYE0007003600QT500070043307004340700435070043607004370700438070063007006500700651070065117007201700735070075117007520700762079025807902581790350079035109070600907070090707107003600000000WSH4102

Available

€14.99*
Power supply 5V–1 A (EU/UK) for weather stations with article number 7002580
This high-quality spare part will quickly get your weather station working again.IMPORTANT: Is this part compatible with your weather station?This spare part is only compatible with the following devices:70025807902580

Available

€14.99*
Power supply Micro-USB 5V-0.6A (EU)
This high-quality spare part will quickly get your weather station working again.IMPORTANT: Is this part compatible with your weather station?This spare part is only compatible with the following devices:700252579025259080500

Available

€14.99*
Power supply 5V-1.5A (EU/UK) angled
This high-quality spare part will quickly get your weather station working again.IMPORTANT: Is this part compatible with your weather station?This spare part is only compatible with the following devices:151977003230

Available

€14.99*
Power supply 5V-0.6A (EU/UK) straight
This high-quality spare part will quickly get your weather station working again.IMPORTANT: Is this part compatible with your weather station?This spare part is only compatible with the following devices:1520015201156597002550CM30007002550GYE0007002550MGU0007002550QT50007902550790255179025527002550000000

Available

€14.99*
BRESSER PM2.5/10 Air Quality Meter
A useful extension to your BRESSER weather station, or also ideal as a practical standalone solution: This PM2.5/PM10 particulate meter will help you to keep track of the air that you breathe. The high-precision meter reliably detects two types of health-relevant particulate matter that causes air pollution: particles with a diameter of less than 10 μm (PM10) and less than 2.5 μm (PM2.5). Measurements – the current reading and the average particulate concentration from the past 24 hours – are displayed on the built-in display and on your weather centre. The base station can be placed at a distance of up to 150 metres from the meter. This device is compatible with weather stations with the following article numbers: 15196151971519815439154401626916508165117002610700262070032107003220700323070032407003520700370070038007003900790321079032209080700 FEATURES High-precision PM2.5/PM10 meter Can be used alone or with select BRESSER weather stations LCD screen for displaying the current reading and the PM2.5/PM10 concentration from the past 24 hours Battery level indicator 4 available channels Transmission frequency: 868 MHz Range of up to 150 m Power supply: 3 rechargeable AA batteries (included) or USB port (cable included) DELIVERY CONTENT PM2.5/PM10 air quality meter 3 rechargeable AA batteries USB cable Instruction manual

Currently not available

€109.00*
BRESSER SBP01 Paper Background Roll 2,72 x 11m Arctic White
​BRESSER background paper is characterized by its excellent quality. With a weight of 160 gram per square meter, the BRESSER background paper is very heavy. The surface has a minimal structure and it's anti-reflective. Because of the ultrafine processor controlled production, the colour quality and colour equality are guaranteed for the whole roll.The background paper is wrapped around a strong cardboard core which fits without sagging on every background system. The core has an inner diameter of 48 mm.What’s the difference between Polar White and Arctic White? Both colours can be described as white. Yet, arctic white is a little brighter whereas polar white has a warmer shade. OUR RECOMMENDATION A taut background, without the lower end of the roll rolling up again by itself, is achieved with the help of the optionally available weighting bar (art.nr. F004394).Note:The colours shown on the screen may differ slightly from the actual colour. This may be related to the setting of the particular screen. FEATURESSolid background paperSurface with minimal structureNon reflectiveStrong cardboard core prevents roll from saggingSCOPE OF DELIVERY1x Paper backrgound roll

Available

€89.00*