Präzise Jagen Clamping Sleeve 56 mm for mounting a clip-on device on a riflescope

End Cap Small (for Clamping Sleeves up to Ø61)With the end cap, you can reliably seal the front end of the clamping sleeve, thus protecting the lens of your riflescope from dust, moisture, and damage during transport. The end cap is made from high-quality aluminium and anodised, ensuring a long lifespan and additional protection. The Small version is suitable for all clamping sleeves with a housing diameter of up to 61 mm.FEATURESProtects the lens from dust, moisture, and damageMade from robust aluminiumAnodised surface for high durabilityPrecisely fits clamping sleeves up to Ø61 mmSCOPE OF DELIVERY1x End Cap Small (for Clamping Sleeves up to Ø61 mm)

The high-quality clamping sleeve has been specially developed for mounting on the riflescope and offers a stable, repeatable base for attaching a clip-on device. It is simply slid over the objective of the riflescope – for models up to 61 mm objective diameter over a length of 40 mm, for 30 mm to 38 mm clamping sleeves over 35 mm – and securely screwed into place. The clamping sleeve remains permanently on the riflescope, enabling quick and precise use of the clip-on device at any time. The overall diameter is 65 mm at the locking ring for models with objectives up to 61 mm. Integrated protective films on the contact surfaces ensure secure adhesion and prevent damage to the riflescope – even with powerful calibres, the clamping sleeve is reliably held in position. Thanks to its precise internal contour and the bayonet mount on the front, it guarantees an absolutely repeatable alignment of the clip-on device every time it is mounted. Made from a single piece of high-quality aluminium and finished with a hard anodised coating, the clamping sleeve is optimally protected against corrosion and wear – ensuring a long service life even under tough hunting conditions. Note: The use of a clip-on device is only permitted if it complies with the legislation of the respective country. Mounting is carried out at your own risk. FEATURES Precision-fit clamping sleeve for mounting on the riflescope Permanent attachment with secure screw connection Integrated protective films to protect the riflescope and improve grip Precise internal contour for exact alignment of the clip-on device Bayonet mount for repeatable installation Made from high-quality aluminium with a hard anodised coating Corrosion- and wear-resistant SCOPE OF DELIVERY Clamping sleeve in the selected version Integrated protective films Installation instructions

The bayonet cover replaces our dust protection plug. This means that from now on, not only your clip-on device is protected, but also the bayonet lugs of your DUO connector. A practical solution that offers real added value in everyday hunting use!

The DUO connector features an internal thread in various sizes, allowing it to be screwed directly onto the connection thread of the clip-on device. Thanks to the integrated locking mechanism, unwanted rotation of the clip-on device is reliably prevented no additional locking nut is required. The DUO connector is compatible with all sizes of clamping sleeves. This allows you to use your clip-on device flexibly on any rifle with a clamping sleeve mounted on the riflescope. The DUO connectors are made from high-quality aluminium and are optimally protected against corrosion and wear by a hard anodised coating ideal for tough hunting use. Special versions: Pard FT32: With bayonet interface, installation possible by the customer. Night Spotter Evo: Requires DUO connector M52x0.75 mm and the included spacer ring; if not available, please order item AR-NS. HIKMICRO Thunder TE19C, TH35 and Pro TQ 50C as well as Cheetah: Require DUO connector M52x0.75 mm and an adapter piece; from generation 2.0 with external thread, no adapter piece is required. Pulsar Forward FN455: Requires DUO connector M52x0.75 mm and a spacer ring (please contact sales). Liemke Merlin 13: Thread M30x1, adapter ring to M52 included in the scope of delivery; compatible with our DUO connector DV-M52. FEATURES Internal thread in various sizes for direct mounting on the clip-on device Integrated locking mechanism prevents rotation without additional nut Compatible with all sizes of clamping sleeves Flexible use on multiple rifles Made from high-quality aluminium Hard anodised coating for corrosion and wear protection Available for numerous devices such as Pulsar Core, Pard FT32, Night Spotter Evo, HIKMICRO, Pulsar Forward FN455 and Liemke Merlin 13 SCOPE OF DELIVERY DUO connector in the selected version Installation instructions

The high-quality clamping sleeve has been specially developed for mounting on the riflescope and offers a stable, repeatable base for attaching a clip-on device. It is simply slid over the objective of the riflescope – for models up to 61 mm objective diameter over a length of 40 mm, for 30 mm to 38 mm clamping sleeves over 35 mm – and securely screwed into place. The clamping sleeve remains permanently on the riflescope, enabling quick and precise use of the clip-on device at any time. Integrated protective films on the contact surfaces ensure secure adhesion and prevent damage to the riflescope – even with powerful calibres, the clamping sleeve is reliably held in position. Thanks to its precise internal contour and the bayonet mount on the front, it guarantees an absolutely repeatable alignment of the clip-on device every time it is mounted. Made from a single piece of high-quality aluminium and finished with a hard anodised coating, the clamping sleeve is optimally protected against corrosion and wear – ensuring a long service life even under tough hunting conditions. Note: The use of a clip-on device is only permitted if it complies with the legislation of the respective country. Mounting is carried out at your own risk. FEATURES Precision-fit clamping sleeve for mounting on the riflescope Permanent attachment with secure screw connection Integrated protective films to protect the riflescope and improve grip Precise internal contour for exact alignment of the clip-on device Bayonet mount for repeatable installation Made from high-quality aluminium with a hard anodised coating Corrosion- and wear-resistant SCOPE OF DELIVERY Clamping sleeve in the selected version Integrated protective films Installation instructions

Replaceable standard power supply units for PULSAR models Trail, Helion, Accolade, Digisight Ultra and Forward F. The rechargeable lithium-ion battery pack significantly extends the operating time of these devices.FEATURESLithium-ion batteryCapacity: 6.4 AhBattery runtime: 1013 h (with Helion)Nominal charging voltage: 5 VNominal charging current: 1.3 AOutput voltage: 3.7 VFull charging time: 4.5 hFull discharge time (I = 250 mAh) (at t = 22 °C): 20 hDischarge operating current: ? 2 ACharging/discharging temperature range (relative humidity 60±5%): 0 ... +45° / -20 °... +60°SCOPE OF DELIVERYBattery packProtective coverUser manualWarranty card