Präzise Jagen Clamping Sleeve 58,5 mm for mounting a clip-on device on a riflescope
PräziseJagen
High-quality clamping sleeve for precise riflescope mounting, repeatable, with protective films, bayonet mount, and robust aluminium construction.
- High-quality clamping sleeve for precise mounting on the riflescope
- Stable, repeatable base for any clip-on device
- Easy installation by sliding on and screwing to the riflescope
- Integrated protective films prevent damage and improve adhesion
- Precise internal contour and bayonet mount for exact alignment
- Made from a single piece of aluminium with a hard anodised coating
- Corrosion- and wear-resistant for long service life
- Suitable for use with powerful calibres
- Suitable for use with powerful calibres
Product number:
15734
EAN:
4262429730449
WEEE-Reg.-Nr.:
DE 34323861
With Bresser recreational optics, you are always perfectly equipped! We bring you closer to the uniqueness of the moment.
Our wide range includes: binoculars, night vision devices, targeting and precision optics, surveillance cameras, as well as spotting scopes and telescopes. Bresser stands for high quality combined with affordable prices. With our Binocular ABC, Binocular Guide, and an introduction to the history and key features of binoculars, we are happy to assist you before and after your purchase.
True art of living consists in seeing the wonderful in the everyday. (Pearl S. Buck)
Table of Contents
1. The History2. The Features
2.1 The Key Figures
2.2 The Magnification
2.3 The Objective Diameter
2.4 The Exit Pupil
2.5 The Twilight Factor
2.6 The Brightness
2.7 The Interpupillary Distance
2.8 The Eye Relief (Focal Point of the Eyepiece)
2.9 The Field of View
2.10 The Focus
2.11 The Rubber Armor
3. The Glass
3.1 The Coating
3.2 The Glass Material
3.3 Porro or Roof Prisms
3.4 Achromats
4. Types of Binoculars
4.1 Binocom or Nautic
4.2 Night Glass or Night Vision Device
4.3 Residual Light Amplifiers
You might be interested in this!
Entdecken Sie unsere Ratgeber!
Product information "Präzise Jagen Clamping Sleeve 58,5 mm for mounting a clip-on device on a riflescope"
The high-quality clamping sleeve has been specially developed for mounting on the riflescope and offers a stable, repeatable base for attaching a clip-on device.
It is simply slid over the objective of the riflescope – for models up to 61 mm objective diameter over a length of 40 mm, for 30 mm to 38 mm clamping sleeves over 35 mm – and securely screwed into place.
The clamping sleeve remains permanently on the riflescope, enabling quick and precise use of the clip-on device at any time.
The overall diameter is 65 mm at the locking ring for models with objectives up to 61 mm.
Integrated protective films on the contact surfaces ensure secure adhesion and prevent damage to the riflescope – even with powerful calibres, the clamping sleeve is reliably held in position.
Thanks to its precise internal contour and the bayonet mount on the front, it guarantees an absolutely repeatable alignment of the clip-on device every time it is mounted.
Made from a single piece of high-quality aluminium and finished with a hard anodised coating, the clamping sleeve is optimally protected against corrosion and wear – ensuring a long service life even under tough hunting conditions.
Note: The use of a clip-on device is only permitted if it complies with the legislation of the respective country.
Mounting is carried out at your own risk.
FEATURES
It is simply slid over the objective of the riflescope – for models up to 61 mm objective diameter over a length of 40 mm, for 30 mm to 38 mm clamping sleeves over 35 mm – and securely screwed into place.
The clamping sleeve remains permanently on the riflescope, enabling quick and precise use of the clip-on device at any time.
The overall diameter is 65 mm at the locking ring for models with objectives up to 61 mm.
Integrated protective films on the contact surfaces ensure secure adhesion and prevent damage to the riflescope – even with powerful calibres, the clamping sleeve is reliably held in position.
Thanks to its precise internal contour and the bayonet mount on the front, it guarantees an absolutely repeatable alignment of the clip-on device every time it is mounted.
Made from a single piece of high-quality aluminium and finished with a hard anodised coating, the clamping sleeve is optimally protected against corrosion and wear – ensuring a long service life even under tough hunting conditions.
Note: The use of a clip-on device is only permitted if it complies with the legislation of the respective country.
Mounting is carried out at your own risk.
FEATURES
- Precision-fit clamping sleeve for mounting on the riflescope
- Permanent attachment with secure screw connection
- Integrated protective films to protect the riflescope and improve grip
- Precise internal contour for exact alignment of the clip-on device
- Bayonet mount for repeatable installation
- Made from high-quality aluminium with a hard anodised coating
- Corrosion- and wear-resistant
- Clamping sleeve in the selected version
- Integrated protective films
- Installation instructions
| Colour: | black |
|---|---|
| Material: | Aluminium |
Product and safety instructions
Skip product gallery
Customers also viewed
Präzise Jagen Clamping Sleeve 35 mm for mounting a clip-on device on a riflescope
€180.00*
The high-quality clamping sleeve has been specially developed for mounting on the riflescope and offers a stable, repeatable base for attaching a clip-on device.
It is simply slid over the objective of the riflescope – for models up to 61 mm objective diameter over a length of 40 mm, for 30 mm to 38 mm clamping sleeves over 35 mm – and securely screwed into place.
The clamping sleeve remains permanently on the riflescope, enabling quick and precise use of the clip-on device at any time.
The overall diameter is 65 mm at the locking ring for models with objectives up to 61 mm.
Integrated protective films on the contact surfaces ensure secure adhesion and prevent damage to the riflescope – even with powerful calibres, the clamping sleeve is reliably held in position.
Thanks to its precise internal contour and the bayonet mount on the front, it guarantees an absolutely repeatable alignment of the clip-on device every time it is mounted.
Made from a single piece of high-quality aluminium and finished with a hard anodised coating, the clamping sleeve is optimally protected against corrosion and wear – ensuring a long service life even under tough hunting conditions.
Note: The use of a clip-on device is only permitted if it complies with the legislation of the respective country.
Mounting is carried out at your own risk.
FEATURES
Precision-fit clamping sleeve for mounting on the riflescope Permanent attachment with secure screw connection Integrated protective films to protect the riflescope and improve grip Precise internal contour for exact alignment of the clip-on device Bayonet mount for repeatable installation Made from high-quality aluminium with a hard anodised coating Corrosion- and wear-resistant
SCOPE OF DELIVERY
Clamping sleeve in the selected version Integrated protective films Installation instructions
Currently not available
