PS 62mm Adapter f. Pulsar FN455

Modular designed multipurpose telescope, both for observing the sun in the H-alpha wavelength, as well as for night sky observations. Easy conversion between the different applications with a few simple steps. 3-lens apochromatic telescope with FPL-51 glass, 130mm aperture and 910mm focal length - excellent image quality for H-Alpha solar observation and also for observing the starry sky at night. With innovative air pressure tuning system, good 2 inch (50.8mm) R&P focuser, and B3400 blocking filter. Solar observing in H-alpha: The LS130MT/B3400 is a complete telescope for observing the sun in H-alpha light, with 130mm free aperture (no central obstruction) and 910mm focal length. The H-alpha wavelength is the most impressive way to observe the sun, showing protuberances at the sun's edge, filaments and flares on the surface, and much more. An internal Etalon filter achieves a bandwidth of <0.7 Angstrom with the innovative air pressure tuning system Pressure-Tuner. Tuning is done by slightly changing the air pressure in a pressure chamber inside the telescope. This changes the refractive index of the air, making it easy to tune to the H-alpha line. The pressure tuner guarantees a homogeneous image, without central obstruction, and a permanently protected Etalon without erosion. A set of collimating lenses installed in the telescope ensures best performance. Fine adjustment is achieved with a solid 2 inch R&P focuser with 10:1 reduction. Blocking-filter is the B3400. The B3400 is good for solar imaging by cameras with very large sensor chips, and can also be used for visual observing. The B3400 blocking-filter is fix installed inside the 2 inch R&P focuser. Observing the starry night sky: The H-Alpha Etalon system can be removed from the telescope in a few easy steps thanks to its modular design. Then the 3-lens apochromatic refractor can be used as a normal telescope with 130mm aperture and 910mm focal length for observation and photography of the night sky. The FPL-51 triplet lens offers an outstandingly low colour aberration image. Common 2 inch star diagonals can be used at the R&P focuser of the telescope. Please note that the optionally available conversion kit 0551696 is absolutely necessary for the LS130MT version with B3400 blocking filter if the telescope is also to be used at night. The conversion kit is not required for the versions with B1200 and B1800. More applications: With additionally available accessories the LS130MT offers even more possibilities! - Double-Stack The LS130MT telescope can optionally be upgraded with the additionally available double-stack module LS130MT/DSII (item number 0551690). The DSII system is a internal double-stack module with Pressure-Tuner. Thereby a bandwidth of <0.5 Angstrom is achieved for H-alpha solar observation. Therefore much more details on the solar surface will become visible. - Solar observing in White-Light If the H-alpha unit has been removed, of course either a sun filter can be installed in front of the objective, or a Herschel-wedge at the focuser can be used to observe the sunspots in White-Light. - Solar observing in Ca-K wavelengthThe additionally available "LUNT Ca-K Filter Module for LS130MT" (item number 0551697) can be used on the LS130MT to observe and photograph super-granulation and other effects visible at this wavelength on the sun. This makes the LS130MT a completely universal usable apochromatic telescope of highest quality! FEATURES 3-lens APO refractor, FPL-51 Aperture: 130mm (no central obstruction) Focal length: 910mm Bandwidth: internal Etalon with <0.7 Angstrom Tuning: air pressure tuning system Pressure-Tuner Blocking filter: B3400 with 2 inch connection Focuser: R&P with 10:1 reduction Two tube-ring with handle Sol-Searcher installed inside handle Dovetail bar at GP-level for astronomical mounts Weight: 12.1kg Length with dew-shield: 95cm Length removed dew-shield: 80cm SCOPE OF DELIVERY LS130MT Multipurpose Telescope Pressure-TunerB3400 blocking filter installed inside focuserTube extension for using without H-alpha Etalon 2 inch R&P focuser with 10:1 reduction Tube rings with dovetail bar Transport case (92 x 42 x 35 cm) Instruction manual

The Explore Scientific Two Room Pop-Up Observatory is a useful weatherproof tent that protects your valuable equipment from wind, dew, rain and dust. Most amateur astronomers and astrophotographers dream of having an observatory to keep dust, dew and wind away from their telescope and to shield disturbing stray light from their telescope's optics. But for many astronomers, an observatory is only a dream because of the cost of a roll-roof building or an observatory dome. There is also the problem that an observatory building needs a permanent location that is suitable for an observatory. Portable, quick to set up and inexpensive A good solution is a portable observatory tent. Compared to their fixed counterparts, a tent is extremely inexpensive and can be set up almost anywhere there is a flat surface and a clear view of the sky. However, setting up a portable observatory tent can also be a hassle. No one wants to waste their valuable observing time reading complex instructions while trying to figure out which pole goes where. For this reason, we have used a sturdy pop-up design. Setting up the EXPLORE SCIENTIFIC Pop-Up Observatory can be done in a matter of minutes. By releasing a retaining strap, the complete tent unfolds from its packaging in just a few seconds. You really don't need to do anything other than connect the two observatory rooms with a Velcro seam and attach it to the ground. Thanks to this simple design, the EXPLORE SCIENTIFIC Pop-Up Observatory can be set up and taken down in just a few minutes, giving you plenty of time to enjoy your astronomy weekend. Plenty of space for your equipment and super compact when folded up. With just under 5 square metres of total space and 1.52 metre high side walls, coupled with 1.83 metre high windscreens, the EXPLORE SCIENTIFIC Pop-Up Observatory allows you to set up your computer equipment in one room and the telescope in the other, or set up two complete telescope systems. Each room is 152 by 152 centimetres. Mobile observatory with compact transport dimensions In addition to being easy to set up and take down, another advantage of the pop-up design is that it is travel-friendly, as it is light and easy to stow away. The entire observatory tent folds down to a package 70 centimetres in diameter and 10 centimetres thick. This allows it to be transported in a small car or even on a flight for distant expeditions. And apart from the fact that it allows you to go to your favourite observing site at any time, portable observatory tents are usually the first choice for astronomers and astrophotographers attending star party events.  Advanced materials provide optimal protection and durability However, the fact that the EXPLORE SCIENTIFIC Pop-Up Observatory is lightweight and easy to store and set up doesn't mean it can't withstand bad weather conditions. The Black-Out coated polyamide material is waterproof and offers excellent UV protection. This guarantees reliable protection for your equipment as well as long-lasting durability of the observatory tent. Large doors for convenient use The doors to enter the observatory tent and pass through the attached rooms are very generously sized at 102 centimetres high and 92 centimetres wide, so you can easily walk in and through your equipment. The doors roll down to keep moisture out and their heavy-duty zips will last for years. The extra weather cover protects your gear when not in use. With the large weather cover included, you can protect your gear from the hot sun or a surprise rain shower during the day. Or even from dew at night. The modern, coated and waterproof material keeps all unwanted weather influences away from your equipment. Included are cords and pegs to tie down the tent. The structure also has additional holding straps for the use of heavy-duty straps, which can be purchased at local hardware stores. PRODUCT VIDEO:  https://youtu.be/1rL5PzPa-dQ FEATURESPractical weather protection for telescopes Protects your equipment from wind, dew, rain and dust Mobile observatory: portable, quickly assembled, reasonably priced Compact transport size also suitable for air travel 5 square metres of space for your equipment and sufficient freedom of movement Interior dimensions: 152 x 304cm Side wall height 152cm / windbreak wall height 183cm Large 102 x 92cm doors for ease of use Additional weather protection cover included Advanced materials provide optimum protection and durability Cords and pegs included to tie down the tent Additional tie downs for heavy duty straps included Transport dimensions and weight: diameter 70cm, height 10cm, 3kg Colour tent material: black SCOPE OF DELIVERY Two-room pop-up observatory tent Weather protection cover Set of cords and pegs

The ADVANCED quick-release adapter is equipped with an integrated thread clamp and provides a fast, secure and precise connection for your clip-on device. With a push-on length of 40 mm, the adapter fits perfectly to the riflescope while compensating for tolerances of ±0.2 mm. Thanks to the integrated thread clamp, no additional locking ring on the clip-on device is required – unwanted loosening of the connection is reliably prevented. The ADVANCED quick-release adapter is fitted with a precise M52x0.75 thread, making it compatible with a wide range of modern clip-on devices. FEATURES High-quality ADVANCED quick-release adapter with integrated thread clamp Push-on length 40 mm Compensates for ±0.2 mm tolerance on the riflescope No locking ring on the clip-on device required Prevents unwanted loosening of the threaded connection Equipped with M52x0.75 thread Robust construction for hunting use SCOPE OF DELIVERY ADVANCED quick-release adapter M52x0.75 Installation instructions

NOTE: This item is a used or returned product. This means: The item may show slight signs of use; some accessories may be missing; the packaging may differ from the original packaging. Please note that refurbished items generally come with a 12-month warranty.

The AS adapter by Smartclip is specially made for your Pulsar device. The made-to-measure design enables you to optimally mount your attachment on your target optics. In addition, the side-closing clip fastener keeps slippage of the adapter on the optics to a minimum.Advantages of the Smartclip adapterMade from ultra-strong aluminium from the aviation industryHard anodizedBuilt-in "silence band" ensures minimal noise during attachment and removal Rounded inlet edges for easy attachmentSide lock ensures that open adapter is easily visible and noticeableFEATURESType: AdapterDesigned for: Pulsar CoreMaterial: Metal (one piece)Required distance: min. 3 mmAvailable sizes: 30mm, 36mm, 40mm, 48mm, 49mm, 50mm, 52mm, 54mm, 56mm, 57mm, 58mm, 59mm, 60mm, 62mm, 63.5mm, 64mm, 65mm (outer diameter of your optics)Weight: 121 gImportant: To connect this adapter to the Pulsar Core or Krypton, you will also need the Smartclip Converter PMC52 for the Core (item number: SC00100) or Smartclip Converter PK52/351 for the Krypton (item number: SC00101). You can connect the FN455 Forward to this AS adapter using the PF4 Converter (SC00103)

Bounty Hunter’s Quick Draw Pro provides depth, fast recovery speed, and pinpoint accuracy; this is truly a multipurpose, professional metal detector. The Quick Draw Pro comes with a 10" waterproof elliptical concentric coil for added depth and sharp target response and an LCD display with touch-pad operation. It has adjustable Sensitivity, Volume, Discrimination and a Notch mode. It has 9 target ID categories, 0-99 Target ID numbers, a 3-segment active depth indicator, a pinpoint mode with depth in inches, 3-segment graphic target depth indicator and 3 tone audio ID. The stem is fully adjustable and includes locking collars. Searching for metal objects is a fun hobby! What will you find? FEATURES​ Low Battery Indicator Built-in Speaker Adjustable Stem: 44" to 51" / 112 – 129.5 cm ¼-inch Headphone Jack Padded Armrest & Cushioned Handgrip ''S-Rod'' Handle SCOPE OF SUPPLY Metal Detector Intruction Manual

The PS adapter by Smartclip is specially made for your Pulsar FN455 device. The made-to-measure design enables you to optimally mount your attachment on your target optics. This adapter is made from one piece to provide additional stability. In addition, the side-closing clip fastener keeps slippage of the adapter on the optics to a minimum. Advantages of the Smartclip adapterMade from ultra-strong aluminium from the aviation industryHard anodizedBuilt-in ''silence band'' ensures minimal noise during attachment and removal Rounded inlet edges for easy attachmentSide lock ensures that open adapter is easily visible and noticeableFEATURESType: AdapterDesigned for: Pulsar FN 455Material: Metal (one piece)Required distance: min. 3 mmAvailable sizes: 48 mm, 56 mm, 57 mm, 58 mm, 59 mm, 60 mm, 62 mm, 63.5 mm, 64 mm, 65 mm (outer diameter of your optics)Weight: 118 g