PULSAR Thermal Imaging Device Telos XQ 35

Compact and balanced designEvery gram counts when hunting. The Krypton 2 impresses with user-friendly handling and comfortable operation. Its short length, low weight, and balanced distribution have minimal impact on the overall balance of the weapon-optic setup when mounted in front of a riflescope. The controls are easy to reach, and the compact form also simplifies storage.Durable magnesium alloy housingThe lightweight yet strong magnesium alloy housing offers high structural integrity and protects the Krypton 2 from recoil and vibration. It is resistant to external mechanical, temperature, and climatic influences. The housing efficiently dissipates heat from internal electronic components, enhancing the device’s operational stability.Maximum battery performance: up to 11 hours runtime on a single chargeThe IPS7 Li-Ion battery pack is quick to replace, charges rapidly, and delivers up to 11 hours of continuous operation. One battery lasts through the night without the need for replacement. Its wireless design and extended runtime make this power source ideal for field use.Highly sensitive thermal sensorThe 384x288 pixel @ 17 µm thermal sensor with NETD

The new BRESSER Weather Station 5-in-1 combines in a unique way a compact design with an extensive information service. The very compact and multifunctional outdoor sensor requires only little space and thus can be placed almost anywhere. A pipe clamp and screws for the attachment at poles (pipe diameter of about 25-33 mm) as well as a stand are already included! The 5-in-1 outdoor sensor transfers reliably all measured values for wind speed, wind direction, humidity, temperature and precipitation rate to the base station. On the clearly structured display of the base station not only these values can be read but also a multitude of history data. The latter allows the internal storage and evaluation of measured data over a period of 24 hours. From the collected measured data, the weather station calculates a very reliable local weather trend forecast for the next 12 hours, depicted by six graphic symbols on the display. For minimum and maximum values an individual alarm can be programmed, which gives an acoustic and a light signal when the defined value is reached. For outside temperatures of -3 °C and below a special alarm for frost/ice warning can additionally be activated. A poor indoor climate often involves health risks especially for children and the elderly. The BRESSER Weather Station 5-in-1 offers you a smart feature to deal with this. The indoor climate indicator informs steadily about the indoor climate with a symbol. Furthermore, the BRESSER Weather Station 5-in-1 features a radio controlled time and date setting (DCF time signal). Already a few minutes after switching the device on the current Central European Time (CET) and the date with weekday are displayed automatically. For the ''moonstruckers'' also the different phases of the moon are shown. An alarm function with snooze mode is also integrated. FEATURES 5-in-1 outdoor multi sensor Inside temperature (°C/°F) and humidity Outside temperature (°C/°F) and humidity Wind direction and speed Graphical weather trend display (12 hours) Beaufort index (scale for the classification for wind speeds) Precipitation rate with history (day/week/month) Air pressure with history (24 hours) Heat index Dew point Radio controlled time and date setting Phases of the moon Alarm function Ice/frost warning Min/Max memory (up tp 24 hours) LED background light, amberGood to know: The sensor pairs with multiple base stations at once – perfect if you want to keep an eye on conditions in different rooms. SCOPE OF DELIVERY Base station with stand 5-in-1 Multisensor with mounting material Manual Additionally, 6 AA batteries are required (not included) PLEASE NOTE: If you should ever need a new outdoor sensor for this product, please check the LOT number on your device or on the packaging: Weather Stations with LOT number 1156742 and lower are compatible with the outdoor sensor with item number 7802520. Weather Stations with LOT number 1156743 and higher are compatible with the outdoor sensor with item number 7802580.

Upgradeable thermal imaging deviceTelos is the new concept of an upgradeable thermal imaging monocular. This series of thermal imaging devices is the first on the market to offer the possibility of hardware upgrades. The components of the Telos can be replaced with new components offering improved functionality. The owner does not need to purchase a new device each time a different technology is introduced. Telos is designed to be durable and future-proof, continually adapting to the ever-changing needs of hunters. With Pulsar’s new concept of upgradability, your Telos becomes a renewable device – or, if you like, a device for life.The upgrade programme is on its way into production and will be introduced later this year.Upgrade possibilities:Adding a laser rangefinder to non-LRF modelsSensor upgradeLens upgradeIntuitive operationActivate the haptic feedback function in the Telos quick menu for a more tactile and intuitive use of Pulsar premium handheld devices. The thermal imaging device responds with short vibrations when you press the control buttons. Objective ring zoom controlYou can ideally adjust the image on the Telos with one hand – the rings for focusing and smooth zoom are located on the objective lens in the classic arrangement, one after the other, as on professional camera lenses. The even arrangement of the rings allows for quick and effortless adjustment to achieve a clear image with the desired magnification.Built for the toughest conditionsTelos thermal imaging devices are designed for use in harsh outdoor environments and in temperatures from -25 to +40 °C. The device is waterproof even when fully submerged. The rubber-coated polymer composite housing offers the best handling properties. The design without protruding parts and the ergonomically optimised housing shape of the Telos thermal imaging devices contribute to safety and comfort during prolonged use. Replaceable battery with direct socket and wireless fast-charging optionThe LPS 7i quick-change Li-Ion battery guarantees more than 8 hours of operating time. The LPS 7i does not require special chargers – simply connect it to any mains adapter via the USB Type-C port and charge it in the shortest possible time using the Power Delivery fast-charging protocol. In addition, the LPS 7i battery supports wireless charging. Ergonomic, non-slip, rubber-coated housingThe rubber-coated housing ensures the thermal imaging device sits securely in the hand in both dry weather and rain. The housing is exceptionally wear-resistant and perfectly withstands extreme temperatures as well as dust and moisture during use. It also protects the device in the event of drops. In addition, the housing is easy to clean and retains its original appearance for a long time. Adaptable for left- and right-handed usersThe vertical, symmetrical arrangement of the controls allows the Telos to be operated with either hand with equal comfort – the buttons are positioned in a row on the top, and the objective rings are used for focusing and changing magnification. Ergonomic and functional carrying caseA hunter needs to move quickly. Good equipment is defined by being available when needed and unnoticeable the rest of the time. The Telos case has an elegant exterior, is user-friendly, and comfortable to carry. The thermal imaging device can be quickly and easily removed and put into position. The optimal strap positioning distributes the weight of the device across the hunter’s body, reducing strain on the shoulders, back, and neck. The cover sits close to the body without hindering bending, twisting, crouching, moving cross-country, or using weapons. In addition, the Telos case is equipped with straps for attachment to a waist belt as well as to gear with a modular MOLLE mounting system, including backpacks and carrying straps. User modeUse the brightness and contrast settings to maximise image detail and clarity under specific observation conditions. The “user mode” function stores the selected brightness and contrast settings in the device’s memory, ensuring optimal image quality the next time the thermal imager is used, without the need for additional adjustments. Fast F/1.0 lensThe characteristics of the thermal imaging optics have a decisive influence on the device’s ability to detect thermal radiation at the lowest levels. Combined with the highly sensitive sensor, the fast F/1.0 lens of the Telos offers maximum detection efficiency. In rain or fog, when the temperature contrast of the observed objects is minimal, the Telos consistently delivers a very high-quality, detailed, contrast-rich, and informative image to the user. Built-in video recorder with 64 GB internal memoryThe Telos has a built-in video recorder, and the internal memory of the thermal imaging device can store hours of video and tens of thousands of photos. A single press of a button is all it takes to capture an interesting subject or start video recording. Stream Vision 2: Wi-Fi integration with iOS and Android devicesThe built-in Wi-Fi connects the Telos to Android and iOS smartphones via the Stream Vision 2 mobile application. This offers a variety of possibilities, such as wireless software updates for the device, real-time image transfer from the device to the smartphone screen, publishing photos and videos taken with the device on social media or sending them via messenger apps, remote control of digital device functions, and access to the latest Pulsar news. Registered users also receive 16 GB of cloud storage for photos and videos taken with the device. High-contrast AMOLED displayThe high-contrast AMOLED display offers improved colour rendering, is energy-efficient and responsive, and delivers sharp and smooth images even in frosty conditions. Support for two Wi-Fi frequency bands 2.4 / 5 GHzIn the Telos, the standard 2.4 GHz smartphone connection band is complemented by an efficient 5 GHz band. The 5 GHz connection offers better bandwidth, faster data transfer rates, immunity to noise, and improved connection stability, resulting in more productive and straightforward operation of the thermal imaging monocular with a smartphone. Waterproof to IPX7 (submersible)Waterproof to IPX7 for protection against heavy rain, snow, or other precipitation: the device is designed to operate flawlessly even after immersion in up to 1 metre of water for up to 30 minutes. Wide operating temperature range (from -25 to +40 °C)The housing, battery, optics, and electronics of the Telos are designed for use in a wide temperature range. The Telos ensures reliable and effective performance in freezing cold down to -25 °C. 8 colour palettes to choose fromWith a choice of 8 colour palettes, the user can better observe the field of view, optimise the device for specific tasks, and respond to changing observation conditions. White Hot, Black Hot, and Red Hot are optimal for detecting objects; Rainbow and Ultramarine increase the chances of detection and identification. Red Monochrome, Sepia, and Violet are best for long night-time observations.

High Resolution in a Compact Design Our most compact and affordable devices are perfect for hunters who want to explore the possibilities of thermal imaging technology without breaking the budget. They are handy and easy to carry, yet still offer high thermal sensitivity and many premium features, including Wi-Fi connectivity and our latest image processing algorithms.Durable Magnesium Alloy Housing The Axion is designed for constant, often tough use. The magnesium alloy housing is lightweight yet robust. The housing reliably protects the internal components of the thermal imaging device from shocks, drops, moisture, heat, or cold. At the same time, the metal housing dissipates heat from the electronics, minimizes image noise, and increases the device's operational stability during long-term observations.Highly Sensitive "Made in Europe" Sensor with 640x480 Pixels and NETD

Upgradeable Thermal Imaging DeviceIn high-tech industries, hardware and software solutions are constantly evolving — and thermal imaging is no exception. Over time, user preferences and requirements change, often becoming more specific. The Telos line of thermal monoculars was developed with this in mind, making it the first upgradeable product line on the market. With Telos, you own a device you can upgrade over the years: enhance it with more powerful optics, higher-resolution sensors and displays, more efficient electronics, or new features like a laser rangefinder or additional optical channels — all without buying a new device, just the upgrade.Highly Sensitive Thermal SensorThe ultra-sensitive thermal sensor with a NETD value of