SMARTCLIP AS 52mm Adapter f. Pulsar Core / Krypton / Proton / FN455

All NAUTIC models have a water resistant and robust rubber armor as well as nitrogen purged optical tubes. Fully multi coated Bak-4 optics allow for a bright and sharp image to be obtained, even if the weather conditions have turned bad.The NAUTIC 8x25 is a compact monocular telescope which is designed for water sports. It is small and lightweight enough to be carried in the trouser pockets, still it offers a 8x magnification - perfect for nautic applications. The supporting loop provides additional security during daily use. The dioptre adjustement can also be used for focusing.FEATURESFully multi coated opticWaterproofDiopter adjustmentTwistUp eyecupsLE-eypieceBak-4 glassSCOPE OF DELIVERYMonocularNylon belt pouch Carrying strap Lens clothInstruction manual

Blocking-filter in 90° zenith mirror diagonal, for telescopes up to 1080mm focal length, and with 2 inch (50.8mm) focuser. Can only be used together with a LUNT H-alpha filter, or with a LUNT H-alpha telescope!Lunt Solar Systems offers blocking-filters in different sizes, and alternatively in 90° star-diagonal housings or straight extension tubes. You can choose what blocking-filter you will use at your LUNT H-alpha Etalon system.The B1200d2 is installed in a 90° star-diagonal housing, for 2 inch (50.8mm) focuser on the telescope side, and with T2 thread and 1.25 inch (31.7mm) eyepiece connection on the eyepiece side. The B1200d2 can be used at LUNT H-alpha systems, if the used telescope has a 2 inch focuser and up to 1080mm focal length.The blocking-filter can not be used without additional H-alpha filter system from Lunt Solar Systems! Blocking-filters are absolutely required for the safety and performance of H-alpha telescopes for solar observing. Lunt Solar Systems blocking-filters contain a unique filter system. We can only warranty safety or performance, if blocking-filter is paired with a H-alpha filter or H-alpha telescope of Lunt Solar Systems.At the tab ''Accessories'' you will find H-Alpha telescopes and filters with which this blocking filter can be combined.FEATURESBlocking-filter only usable at additional H-alpha filter systemFilter diameter: 12mmUsable at telescopes up to 1080mm focal90° star-diagonal housing2 inch slide tube for 2 inch focuserConnection for 1.25 inch eyepiecesT2 thread for camera connectionSCOPE OF DELIVERYBlocking-filter B1200d2 in 90° star-diagonal for 2 inch focuser

The AS adapter by Smartclip is specially made for your Pulsar device. The exact production of the Smartclip enables you to mount your attachment optimally on your optics. The clip fastener which is closed to the side can reduce the adapter slipping on the optics to a minimum. Advantages of the Smartclip adapter Extremely stable aluminum from the aviation industry Hard anodized Built-in "Silence Band" for very quiet mounting in the forest Rounded inlet edges for easy attachment Easily visible and noticeable when the adapter is open thanks to the side lock PROPERTIESType: AdapterUsable for: Pulsar CoreMaterial: metal from one pieceRequired distance to your rifle: min 3mmAvailable sizes: 30mm, 36mm, 40mm, 48mm, 49mm, 50mm, 52mm, 54mm, 56mm, 57mm, 58mm, 59mm, 60mm, 62mm, 63.5mm, 64mm, 65mm (outer diameter of your optics)Weight: light 121g Important: To connect this adapter to the Pulsar Core or Krypton, you also need the Smartclip Converter PMC52 for the Core (article number: SC00100) or Smartclip Converter PK52 / 351 for the Krypton (article number: SC00101). You can connect the FN455 Forward to this AS adapter using the PF4 Converter (SC00103)

You see better with two eyesThe BRESSER BinoViewer Deluxe makes it possible to observe astronomical objects in a relaxed way with both eyes and with considerably more detail than using one eye. The images created of the moon, planets and globular clusters are particularly impressive. But also with deep-sky objects such as the Orion Nebula the detection of details is much easier. At the same time this binoviewer is very easy to handle. Thanks to the newly patented optical system you can get into focus with any telescope. All you need is a pair of identical eyepieces to enjoy this dramatic and immersive viewing experience.How to use the BinoViewer? Since the BRESSER BinoViewer Deluxe does not require an additional light path (back focus), it can be used with any telescope - including Newtonians and short focus refracting telescopes, which traditionally suffered when using standard binoviewers. No light path corrector or similar accessory is necessary. If a standard 1.25'' eyepiece can be focused, the binoviewer will also work. The eyepiece focal length and field of view size of the eyepieces used are fully retained. As with binoculars one eyepiece is focused first using the telescope focuser. Then the second eyepiece can be brought into focus using the helical focuser on the binoviewer. The required interpupillary distance is then elegantly adjusted to a range of 58–74mm with the help of a linear sliding mechanism, with graduated marker, to help you find your ideal interocular setting quickly.  Self-centring helical eyepiece grips, rather than side-mounted thumbscrew eyepiece retainers are used, decreasing the chance of offsetting collimation of both eyepiece to each other.  The fact that this design of binoviewer uses a well-engineered linear slide mechanism to adjust interpupillary distance, rather than a cheaper-to-produce traditional hinged design also helps retention of collimation.Which objects can be observed with this accessory?Actually, all objects that were previously observed with the telescope in question, but only monocularly with one eye. Because there is no magnification factor at the binoviewer, even low magnifications can be achieved. This makes not only the moon, planets and globular clusters, but also the brighter deep-sky objects very interesting observation targets. The use of two eyes leads to a more relaxed view than using one eye alone.  Although true depth of field viewing at infinity is a little beyond most telescopes and binoviewers, users will note how the human brain attempts to impose depth of field ("3d-like") effects on stereo views through binoviewers.  The biggest difference that most observers comment upon when comparing views through binoviewers like these, as opposed to single monocular eyepiece views, is the extra detail that can be seen in most observable targets.  Relaxed viewing and extra detail in objects are the two main benefits of binoviewing, which the BRESSER Bino Viewer Deluxe 1.25'' delivers in abundance.Also ideal as an accessory for solar telescopesA very special application is the use of the BRESSER BinoViewer Deluxe in combination with all solar telescopes. The spherical shape of the sun with all its surface details is shown very impressively.  The depth of field effects of seeing filaments silhouetted against the solar surface are particularly enjoyable to observe.Important note: Do not use the BRESSER Binoviwer Deluxe without a suitable solar telescope or a safe solar filter in front of the telescopes objective lens . Otherwise, there is an acute risk of going blind.High-quality mechanics and materialsThe entire BRESSER BinoViewer Deluxe is made of high-quality materials. Except for the outer plastic covers all components are made of anodised aluminium. Particularly remarkable are the low-backlash sliding mechanism for adjusting the interpupillary distance and the precise rotary clamping of both eyepiece adapters. The wide clamping surface holds the eyepieces in place securely and also centres them automatically on the optical axis. The one-sided dioptric adjustment has a backlash-free helical drive and enables the finest corrections. For safe transport a high-quality hard-shell transport case is included in the scope of delivery.Which eyepieces can be used?All eyepieces with a 1.25'' barrel and a field stop of up to 22mm. Depending on the interpupillary distance the outer diameter of the eyepiece housing should not exceed a value of approximately 50 mm.Filter thread 1.25'' availableNo 2nd filter sets are necessary to operate the BRESSER Binocular Approach Deluxe. The desired colour or nebula filter can be screwed directly into the 1.25'' nosepiece. in this configuration, when changing the eyepieces to affect a change in magnification, no swapping of filters is necessary.  Unique mirror-lens system with Ohara (Japan) lanthanum glass material The BRESSER Binocular Viewer Deluxe is equipped with a unique mirror-lens system. This has the advantage of higher light transmission and less color aberration. The resulting image is simply brighter and sharper. To achieve this the exclusive Ohara (Japan) lanthanum glass material has been used and in addition all optical surfaces are equipped with a full multi-layer broadband coating. Finally the beam-splitting mirror has a 99% dielectric coating and completes the excellent optical design.FEATURESEnables binocular observations with all telescopesRelaxed and comfortable viewingThree-dimensional viewing experienceSuitable for all telescopes with 1.25'' eyepiece connectionNo additional light path requiredNo magnification factor at the binocular attachmentEven low magnifications with large fields of view are achievableFor observing moon, planets and deep sky objectsPrecise and robust mechanicsSliding mechanism to adjust the interpupillary distanceDioptric compensation via fine helical driveWide eyepiece rotation clamp with automatic centeringFilter thread 1.25'' (M28.5 x 0.6mm) availableLens and mirror design made of finest Ohara (Japan) lanthanum glass materialAdvanced broadband multilayer coating on all optical surfaces99 % dielectric-coated beam-splitting mirrorHigh-quality hard-shell carrying case includedWHAT'S INCLUDEDBino Viewer DeluxeDust capsCarrying case 

The AS adapter by Smartclip is specially made for your Pulsar device. The exact production of the Smartclip enables you to mount your attachment optimally on your optics. The clip fastener which is closed to the side can reduce the adapter slipping on the optics to a minimum. Advantages of the Smartclip adapter Extremely stable aluminum from the aviation industry Hard anodized Built-in "Silence Band" for very quiet mounting in the forest Rounded inlet edges for easy attachment Easily visible and noticeable when the adapter is open thanks to the side lock PROPERTIESType: AdapterUsable for: Pulsar CoreMaterial: metal from one pieceRequired distance to your rifle: min 3mmAvailable sizes: 30mm, 36mm, 40mm, 48mm, 49mm, 50mm, 52mm, 54mm, 56mm, 57mm, 58mm, 59mm, 60mm, 62mm, 63.5mm, 64mm, 65mm (outer diameter of your optics)Weight: light 100g Important: To connect this adapter to the Pulsar Core or Krypton, you also need the Smartclip Converter PMC52 for the Core (article number: SC00100) or Smartclip Converter PK52 / 351 for the Krypton (article number: SC00101). You can connect the FN455 Forward to this AS adapter using the PF4 Converter (SC00103)