SMARTCLIP AS 60mm Adapter f. Pulsar Core / Krypton / Proton / FN455

The PS adapter by Smartclip is specially made for your Pulsar FN455 device. The made-to-measure design enables you to optimally mount your attachment on your target optics. This adapter is made from one piece to provide additional stability. In addition, the side-closing clip fastener keeps slippage of the adapter on the optics to a minimum. Advantages of the Smartclip adapterMade from ultra-strong aluminium from the aviation industryHard anodizedBuilt-in ''silence band'' ensures minimal noise during attachment and removal Rounded inlet edges for easy attachmentSide lock ensures that open adapter is easily visible and noticeableFEATURESType: AdapterDesigned for: Pulsar FN 455Material: Metal (one piece)Required distance: min. 3 mmAvailable sizes: 48 mm, 56 mm, 57 mm, 58 mm, 59 mm, 60 mm, 62 mm, 63.5 mm, 64 mm, 65 mm (outer diameter of your optics)Weight: 111g

Optical pole finder scope for fast and precise polar alignment of the EXPLORE SCIENTIFIC iEXOS-100 EQ mount. The EXPLORE SCIENTIFIC Pole Finder Scope is used with the EXPLORE SCIENTIFIC iEXOS-100 EQ mount (Art. No. 0456100) and allows a very precise alignment to the celestial pole by unsing the illuminated crosshairs and constellation markings. Simply adjust the pole height and azimuth until the constellation markings in the polar finder match the constellations in the sky - that's it. Ideal for optimizing tracking accuracy in astrophotography. FEATURES Optical pole finder scope with illumination To optimize the polar alignment Suitable for EXPLORE SCIENTIFIC iEXOS-100 EQ mountIlluminated crosshairs and constellation markings Quick and easy to use SCOPE OF DELIVERYPolar finder scope iEXOS-100Mounting material Instruction manual  

The AS adapter by Smartclip is specially made for your Pulsar device. The made-to-measure design enables you to optimally mount your attachment on your target optics. In addition, the side-closing clip fastener keeps slippage of the adapter on the optics to a minimum.Advantages of the Smartclip adapterMade from ultra-strong aluminium from the aviation industryHard anodizedBuilt-in ''silence band'' ensures minimal noise during attachment and removal Rounded inlet edges for easy attachmentSide lock ensures that open adapter is easily visible and noticeableFEATURESType: AdapterDesigned for: Pulsar CoreMaterial: Metal (one piece)Required distance: min. 3 mmAvailable sizes: 30mm, 36mm, 40mm, 48mm, 49mm, 50mm, 52mm, 54mm, 56mm, 57mm, 58mm, 59mm, 60mm, 62mm, 63.5mm, 64mm, 65mm (outer diameter of your optics)Weight: 121 gImportant: To connect this adapter to the Pulsar Core or Krypton, you will also need the Smartclip Converter PMC52 for the Core (item number: SC00100) or Smartclip Converter PK52/351 for the Krypton (item number: SC00101). You can connect the FN455 Forward to this AS adapter using the PF4 Converter (SC00103)

This dovetail rail is suitable for mounting on BRESSER MESSIER 6 , 8 and 10 inch Dobson telescopes. The dovetail rail is manufactured according to the GP standard and therefore these Dobson telescope tubes can be used on any telescope mounting with the appropriate carrying capacity. The prism rail is 200mm long and therefore offers sufficient clearance for secure mounting on the telescope mount. In combination with the optionally available carrying handle Art. No. 4940150, these Dobson telescope tubes can also be easily transported because the carrying handle is mounted in the centre of gravity of the telescope. This dovetail rail is also suitable as spare part for all other MESSIER telescopes with 200mm dovetail rail. FEATURESdovetail rail (GP) for 6, 8 and 10 inch MESSIER Dobson telescopeswhen using these telescope tubes on EQ mountsthe assembly is carried out on the original tube ringsalso suitable as spare part for MESSIER telescopes with 200mm prism railassembly material and tools includedlength: 200mm; width: 45 mm; height: 16 mmbore spacing: 160 mm; Bore diameter: 6.5 mm SCOPE OF DELIVERYdovetail rail (GP)mounting screws (2 pieces; 1/4 inch)hex wrench tool (3/16 inch)

The DUO connector features an internal thread in various sizes, allowing it to be screwed directly onto the connection thread of the clip-on device. Thanks to the integrated locking mechanism, unwanted rotation of the clip-on device is reliably prevented – no additional locking nut is required. The DUO connector is compatible with all sizes of clamping sleeves. This allows you to use your clip-on device flexibly on any rifle with a clamping sleeve mounted on the riflescope. The DUO connectors are made from high-quality aluminium and are optimally protected against corrosion and wear by a hard anodised coating – ideal for tough hunting use. Special versions: Pard FT32: With bayonet interface, installation possible by the customer. Night Spotter Evo: Requires DUO connector M52x0.75 mm and the included spacer ring; if not available, please order item AR-NS. HIKMICRO Thunder TE19C, TH35 and Pro TQ 50C as well as Cheetah: Require DUO connector M52x0.75 mm and an adapter piece; from generation 2.0 with external thread, no adapter piece is required. Pulsar Forward FN455: Requires DUO connector M52x0.75 mm and a spacer ring (please contact sales). Liemke Merlin 13: Thread M30x1, adapter ring to M52 included in the scope of delivery; compatible with our DUO connector DV-M52. FEATURES Internal thread in various sizes for direct mounting on the clip-on device Integrated locking mechanism prevents rotation without additional nut Compatible with all sizes of clamping sleeves Flexible use on multiple rifles Made from high-quality aluminium Hard anodised coating for corrosion and wear protection Available for numerous devices such as Pulsar Core, Pard FT32, Night Spotter Evo, HIKMICRO, Pulsar Forward FN455 and Liemke Merlin 13 SCOPE OF DELIVERY DUO connector in the selected version Installation instructions