SMARTCLIP AS 62mm Adapter f. Pulsar Core / Krypton / Proton / FN455

The AS adapter by Smartclip is specially made for your Pulsar device. The exact production of the Smartclip enables you to mount your attachment optimally on your optics. The clip fastener which is closed to the side can reduce the adapter slipping on the optics to a minimum. Advantages of the Smartclip adapter Extremely stable aluminum from the aviation industry Hard anodized Built-in "Silence Band" for very quiet mounting in the forest Rounded inlet edges for easy attachment Easily visible and noticeable when the adapter is open thanks to the side lock PROPERTIESType: AdapterUsable for: Pulsar CoreMaterial: metal from one pieceRequired distance to your rifle: min 3mmAvailable sizes: 30mm, 36mm, 40mm, 48mm, 49mm, 50mm, 52mm, 54mm, 56mm, 57mm, 58mm, 59mm, 60mm, 62mm, 63.5mm, 64mm, 65mm (outer diameter of your optics)Weight: light 100g Important: To connect this adapter to the Pulsar Core or Krypton, you also need the Smartclip Converter PMC52 for the Core (article number: SC00100) or Smartclip Converter PK52 / 351 for the Krypton (article number: SC00101). You can connect the FN455 Forward to this AS adapter using the PF4 Converter (SC00103)

The high-quality clamping sleeve has been specially developed for mounting on the riflescope and offers a stable, repeatable base for attaching a clip-on device. It is simply slid over the objective of the riflescope – for models up to 61 mm objective diameter over a length of 40 mm, for 30 mm to 38 mm clamping sleeves over 35 mm – and securely screwed into place. The clamping sleeve remains permanently on the riflescope, enabling quick and precise use of the clip-on device at any time. Integrated protective films on the contact surfaces ensure secure adhesion and prevent damage to the riflescope – even with powerful calibres, the clamping sleeve is reliably held in position. Thanks to its precise internal contour and the bayonet mount on the front, it guarantees an absolutely repeatable alignment of the clip-on device every time it is mounted. Made from a single piece of high-quality aluminium and finished with a hard anodised coating, the clamping sleeve is optimally protected against corrosion and wear – ensuring a long service life even under tough hunting conditions. Note: The use of a clip-on device is only permitted if it complies with the legislation of the respective country. Mounting is carried out at your own risk. FEATURES Precision-fit clamping sleeve for mounting on the riflescope Permanent attachment with secure screw connection Integrated protective films to protect the riflescope and improve grip Precise internal contour for exact alignment of the clip-on device Bayonet mount for repeatable installation Made from high-quality aluminium with a hard anodised coating Corrosion- and wear-resistant SCOPE OF DELIVERY Clamping sleeve in the selected version Integrated protective films Installation instructions

The BRESSER Pirsch Gen II spotting scopes are primarily intended for nature observers and hunters. Equipped with a light-intense, fully broadband multi-coated 80 mm lens, they allow higher magnifications even at twilight. This spotting scope is also equipped with the high-quality UR coating for brighter images. Together with the waterproof and nitrogen-filled housing and the non-reflective enforcement, nature observers can determine e.g. bird species in any weather or hunters can target game even at long distances. Photography But also friends of digital photography will find a reliable tool in the Pirsch series: together with the DSLR adapters 49-20002 or 49-14911 almost all digital cameras or smartphones can be connected. Robust materials The focus and eyepieces are made of sturdy metal for a long-lasting pleasure with the Pirsch spotting scope. The rubber enforcement is manufactured to ensure a firm grip. Compensation The Pirsch spotting scopes of Gen. II are all equipped with the new UR coating. This special coating ensures better light transmission and therefore provides a bright image even in difficult lighting conditions. 10:1 focusing An important factor in optical devices is optimal focusing. Here, we at BRESSER have paid great attention to fast and easy focusing as well as very precise focusing. Thus, the focus of the Pirsch spotting scope can be adjusted quickly and down to the last cm. This is ensured by the 10:1 ratio of the focus. Waterproof and nitrogen filled All Pirsch models are waterproof and nitrogen filled. So you have the perfect companion with you in all weather conditions. Rain or fog does not matter to the device. Fogging from the inside in case of large temperature differences is prevented by the nitrogen filling and thus ensures that the device is always ready for use. PROPERTIES Zoom perspective slanting view fully multi-coated optics UR coated optics very high light collecting capacity waterproof and nitrogen filled housing SCOPE OF DELIVERY Spotting scope Ready bag for spotting scope Instructions

The AS adapter by Smartclip is specially made for your Pulsar device. The exact production of the Smartclip enables you to mount your attachment optimally on your optics. The clip fastener which is closed to the side can reduce the adapter slipping on the optics to a minimum. Advantages of the Smartclip adapter Extremely stable aluminum from the aviation industry Hard anodized Built-in "Silence Band" for very quiet mounting in the forest Rounded inlet edges for easy attachment Easily visible and noticeable when the adapter is open thanks to the side lock PROPERTIESType: AdapterUsable for: Pulsar CoreMaterial: metal from one pieceRequired distance to your rifle: min 3mmAvailable sizes: 30mm, 36mm, 40mm, 48mm, 49mm, 50mm, 52mm, 54mm, 56mm, 57mm, 58mm, 59mm, 60mm, 62mm, 63.5mm, 64mm, 65mm (outer diameter of your optics)Weight: light 121g Important: To connect this adapter to the Pulsar Core or Krypton, you also need the Smartclip Converter PMC52 for the Core (article number: SC00100) or Smartclip Converter PK52 / 351 for the Krypton (article number: SC00101). You can connect the FN455 Forward to this AS adapter using the PF4 Converter (SC00103)

The ADVANCED quick-release adapter is equipped with an integrated thread clamp and provides a fast, secure and precise connection for your clip-on device. With a push-on length of 40 mm, the adapter fits perfectly to the riflescope while compensating for tolerances of ±0.2 mm. Thanks to the integrated thread clamp, no additional locking ring on the clip-on device is required – unwanted loosening of the connection is reliably prevented. The ADVANCED quick-release adapter is fitted with a precise M52x0.75 thread, making it compatible with a wide range of modern clip-on devices. FEATURES High-quality ADVANCED quick-release adapter with integrated thread clamp Push-on length 40 mm Compensates for ±0.2 mm tolerance on the riflescope No locking ring on the clip-on device required Prevents unwanted loosening of the threaded connection Equipped with M52x0.75 thread Robust construction for hunting use SCOPE OF DELIVERY ADVANCED quick-release adapter M52x0.75 Installation instructions

Upgradeable Thermal Imaging DeviceIn the high-tech industry, components and software solutions are constantly evolving — and thermal imaging is no exception. Over time, users also develop more specific preferences and performance expectations. That’s why the Telos thermal monocular line was developed with a focus on technology and user needs. Telos is the first line of thermal imaging devices on the market that can be technically upgraded at the customer’s request. Own a Telos and gain the ability to enhance it over the years — whether with more powerful optics, a higher-resolution sensor and screen, more efficient electronics, or new features. You can even add a laser rangefinder or additional optical channels. This way, you'll always have the latest model, paying only for the upgrades.Highly Sensitive Thermal SensorThe extremely sensitive thermal sensor with a NETD value of