- Für Aufnahmen im Primärfokus und Okularprojektion geeignet
- Mit 48mm (2") Filtergewinde
- Länge: 164mm ,Gewicht: 390g
- Nicht für 2" Okulare geeignet
Product number:
RX002308
EAN:
4007922082165
WEEE-Reg.-Nr.:
DE 34323861
Product information "Vixen 43 mm Deluxe Camera Adapter (Refurbished)"
NOTE: This item is a used or returned product. This means: The item may show slight signs of use and the packaging may differ from the original packaging. Please note that refurbished items generally come with a 12-month warranty.
The adapter to connect a SLR camera or a CCD camera to an astronomical telescope. For prime focus and eye projection photography Can be attached to a 43.0-mm eyepiece.
The adapter to connect a SLR camera or a CCD camera to an astronomical telescope. For prime focus and eye projection photography Can be attached to a 43.0-mm eyepiece.
Product and safety instructions
Manufacturer:
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede
Contact:
www.bresser.de
www.bresser.de
Warning notes
- General safety instructions DANGER Risk of suffocation! Improper use of this product can result in suffocation, especially for children. Therefore, carefully observe the following safety instructions. Keep packaging materials (plastic bags, rubber bands, etc.) away from children! There is a risk of suffocation! Keep cords, ribbons, and similar materials away from children! They could accidentally strangle themselves and suffocate! NOTE Risk of material damage! Improper handling can damage the device and/or accessories. Therefore, only use the device according to the following safety instructions. Do not dismantle the device! In the case of a defect, contact your dealer. They will contact the service center and may send the device in for repair.
- Never look at the sun through an eyepiece/telescope without a certified protection filter. A moon filter can never be used for solar observation. The moon filter is only suitable for moon observation. The solar filter must be mounted in front of the telescope opening, not at the eyepiece. Otherwise, the concentrated light beam through the optics will immediately destroy the filter foil, leading to severe eye damage, including permanent blindness.
- Never leave the optics unattended. Children and inexperienced adults could point the telescope at the sun without proper precautions and lose their eyesight.
- Do not expose the device to high temperatures.
Skip product gallery
Customers also viewed
Vixen Camera Adapter 60 mm to M48
€98.00*
The Vixen 60 mm to M48 camera adapter is used to mount an
astronomical CMOS camera to Vixen telescopes with a 60 mm focuser.
The adapter is suitable for cameras or accessories with an M48 × 0.75 internal thread.
You can directly connect third-party CMOS cameras and other products with an M48 thread.
(Depending on the CMOS camera, an extension tube (optional) may be required.) The adapter can be freely rotated by loosening the clamping screws to orient the image as desired.
Using the optional M56 Filter Conversion Adapter 48/52, you can attach 48 mm / 52 mm third-party
photographic filters.
Note:When using the M56 Filter Conversion Adapter 48/52, the PH corrector, PH extender, Coma Corrector 3 and SDP Reducer cannot be used.
FEATURES
Camera adapter: 60 mm to M48
Telescope side connection: 60 mm, P = 0.75 mm
Accessory side (internal): M56 × 0.75 (female)
Camera side (internal): M48 × 0.75 (female)
Adapter: rotatable
SCOPE OF DELIVERY
60 mm to M48 camera adapter
Currently unavailable
