Vixen 60–50.8-mm adapter sleeve for R200SS

The Vixen 60–50.8-mm adapter sleeve adapts the 60-mm connection of a Vixen focuser to a 50.8-mm eyepiece connection and allows a mark I–III coma corrector to be connected to a R200SS Newton

  • Adapts a 60-mm connection to a 50.8-mm eyepiece connection
  • Compatibility: All Vixen OTAs with 60-mm connection
  • Adapter can be used on both sides with thread for coma corrector
  • Length: 13 mm or 34 mm
  • Weight: 66 g

€41.00*

Available, delivery time: 1-3 days

Product number: X002325
EAN: 4955295372508
WEEE-Reg.-Nr.: DE 34323861

With BRESSER, you can enjoy a smooth introduction to the vast world of astronomy. Our detailed information ("Telescope Guide") provides valuable tips for beginners—but even experienced astronomers can use the information we provide (e.g., tables for the geographical latitude of all major world cities) as a reference.

Here is the table of contents of the comprehensive BRESSER Telescope Guide:

Sky Guides by Bresser

The Sky Guide provides comprehensive information on constellations, planetary positions, and astronomical events – perfect for planning your observations and delving deeper into astronomy.
Visit the guide directly here to make the most of your observations!
Product information "Vixen 60–50.8-mm adapter sleeve for R200SS"
The Vixen 60–50.8-mm adapter sleeve can be used to adapt the 60-mm connection of a Vixen focuser for a 50.8-mm eyepiece connection. This also allows a mark I–III coma corrector to be connected to a R200SS Newton telescope.

FEATURES
  • Adapter ring 60 mm to 50.8 mm
  • Adapts 60-mm focusers for 50.8-mm eyepieces
  • Compatibility: All Vixen OTAs with 60-mm connection
  • Allows a mark I–III coma corrector to be connected to a R200SS Newton
  • Length: 13 mm or 34 mm
  • Weight: 66 g

PACKAGE CONTENTS
  • Vixen 60–50.8-mm adapter sleeve
Batteries required: 0
Colour: black
Material: Aluminium
Net weight (without access.) (g): 66
Total length (mm): 13

Produkt- und Sicherheitshinweise


Manufacturer: 
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede

Contact: 
www.bresser.de


Warning notes
  • General safety instructions DANGER Risk of suffocation! Improper use of this product can result in suffocation, especially for children. Therefore, carefully observe the following safety instructions. Keep packaging materials (plastic bags, rubber bands, etc.) away from children! There is a risk of suffocation! Keep cords, ribbons, and similar materials away from children! They could accidentally strangle themselves and suffocate! NOTE Risk of material damage! Improper handling can damage the device and/or accessories. Therefore, only use the device according to the following safety instructions. Do not dismantle the device! In the case of a defect, contact your dealer. They will contact the service center and may send the device in for repair.
  • Never look at the sun through an eyepiece/telescope without a certified protection filter. A moon filter can never be used for solar observation. The moon filter is only suitable for moon observation. The solar filter must be mounted in front of the telescope opening, not at the eyepiece. Otherwise, the concentrated light beam through the optics will immediately destroy the filter foil, leading to severe eye damage, including permanent blindness.
  • Never leave the optics unattended. Children and inexperienced adults could point the telescope at the sun without proper precautions and lose their eyesight.
  • Do not expose the device to high temperatures.

Customers also bought

Vixen SX 60 mm to 50.8 mm adapter sleeve
The Vixen SX 60 mm to 50.8 mm adapter sleeve can be screwed on to the thread of a 60-mm focuser for connectionto a 50.8-mm (2") sleeveFEATURES Adapts 60-mm focusers for 50.8-mm eyepieces or flip mirrors. Compatibility: All Vixen OTAs with 60-mm connection Length: 10 mmWeight: 65 gPACKAGE CONTENTS60 mm to 50.8 mm adapter sleeve

€33.00*

Customers also viewed

Vixen DC ring 60 mm to T2 camera thread
This DC ring can be used to fit a 60-mm thread to a 42-mm T2 thread. It is suitable for use with T-mount adapter rings for cameras or with the Vixen T2 42–31.7 mm reducing sleeve (item no.: X002294). This means it can be used to mount DSLR cameras on the Vixen R200SS and other telescopes with 60-mm focuser.FEATURESFor fitting T-mount adapter rings for the camera Adapts to 31.7 mm when connected to the Vixen eyepiece adapter (item no.: X002294)Weight: 26 g PACKAGE CONTENTSDC ring 60 mm

€49.00*
%
EXPLORE SCIENTIFIC Special T2-Ring Canon 1,5mm light-path
This special T2-Ring for Canon DSLR Camera offers a extreme short light-path of only 1,5mm. Regular T2-Rings needs a light-path of about 11-12mm and if you have a close backfocus situation these certain millimeters are making the difference to reach the focus.  

€33.00* €41.00* (19.51% saved)
Vixen SXD2WL R200SS Telescope Set
Complete SXD2WL R200SS Newton Telescope Set with GoTo Mount, Tripod and EyepiecesThis high-quality Newton telescope set impresses with its large 200 mm aperture and fast f-ratio for photography. The telescope is manufactured in Japan and scores with its excellent workmanship, sharpness, and contrast performance. The advantage of this telescope lies in its low weight and short focal length. Thus, it is perfectly suited for large deep-sky objects.You will be amazed when observing the moon's surface with its craters or Saturn with its ring system. On Jupiter, in a good night many small details in the cloud bands will be visible, such as the Great Red Spot on the planet. In moonless nights, you can observe the Andromeda Nebula, Orion Nebula, Eagle Nebula, Lagoon Nebula and many other interesting fainter objects. The brighter globular clusters can also be easily resolved into individual stars.The fast f/4 ratio makes this telescope perfect for photography. With it, you can quickly achieve a great photo and don't need endlessly long exposure times. Optimise the image quality with the optional flattener Art. No. X000150. This flattener optimises the image up to the corners of a full-frame DSLR camera. The large 60 mm eyepiece drawtube of the telescope also allows for mounting heavy cameras without tilting. The stable metal tripod allows for a vibration-free setup of the telescope and mount even in windy weather.The SXD2WL mount is easily operated via a Wifi module with a smartphone or tablet. The user-friendly control of the mount is available through the free STAR BOOK Wireless app. This enables you to utilise practical features of celestial navigation, such as automatic GoTo swivelling to specific celestial objects, very easily via your smartphone or tablet. As the power consumption of the conventional LCD screen (STAR BOOK TEN) is eliminated, the power consumption of the mount is reduced by up to 20%. This makes longer astronomical observations and astrophotography possible. When you tap the desired celestial object from a list, it automatically swivels into the telescope's field of view, and tracking begins. An existing STAR BOOK TEN controller can also be used on this mount without any problems. Equipped with the same precision stepper motors as the flagship model, the AXD mount, the SXD2WL introduces a new standard of performance and precision in the Vixen mount family. The cross of axes of the mount has a photographic carrying capacity of 15 kg while weighing only 9.2 kg, making it excellent for mobile observations. Additionally, the motors located in the lower part of the mount also serve as counterweights. This means that the mount requires fewer weights for balance. Details of the SXD2 Mount Precision stepper motors and Micro-Step Motion Control System The heart of the SXD2 is the precision stepper motors, offering better performance and response than previous models. The Micro-Step Motion Control System features powerful yet very quiet drive properties, suitable for both fine movements and rapid swivels. Built-in bearings The bearings of the RA and DEC axes and the worm shafts have been significantly improved to reduce the load on the motors. As a result, the motors move much quieter than in previous models. High-precision worm gears Advanced manufacturing technologies have eliminated errors in worm gear drives. The edges of both the worms and worm gears are exceptionally smooth, allowing very precise tracking. Declination axis as counterweight The massive motor units are built into the lower part of the declination axis, lowering the centre of gravity of the SXD2 right below the intersection of the RA and DEC axes. This reduces the need for additional counterweights. Latitude adjustment The latitude is adjustable between 0 and 70 degrees (divided into 3 zones and adjustable +/- 15 degrees per zone, for high, medium, and low latitudes); latitude scale in 2-degree steps; fine adjustment with a tangent screw head, about 0.8 degree per turn. Built-in PFL-II polar finder with lighting The built-in 5x20 mm polar finder with a 10° field of view has a 3-star alignment system. This eliminates the tedious setting of date and time. The illuminated reticle with variable brightness and automatic shutdown is adjustable in 8 stages and illuminated in red. The alignment accuracy is 3 arc minutes. Details of the Wireless Module The Vixen Wifi adapter for EQ mounts enables you to control your Vixen mount via a smartphone or tablet. With the smartphone app STAR BOOK Wireless (free), celestial navigation becomes easy and wireless. Thus, the app instantly turns your mobile device into a controller for the equatorial mount. The response delay of the mount, the biggest disadvantage of wireless connections, has been reduced to a level comparable to wired solutions. Reduced power consumption compared to traditional controllers with LCD monitor The power consumption of the mount is reduced by up to 20%, enabling longer observations than with traditional wired controllers such as the STAR BOOK TEN. Operation similar to the STAR BOOK TEN controller The STAR BOOK Wireless App is set up similarly to the STAR BOOK TEN controller. Depending on the star chart setting, it contains up to 259,000 celestial objects. Tap on a celestial object in the object list and start the GoTo. The mount now automatically moves to this target and brings it into the field of view of the telescope. All popular features of the STAR BOOK TEN are retained. Convenient operation While looking through the telescope, you control the mount by swiping across the star chart in the app. Since there are no buttons, you simply glide your finger across the star chart to comfortably operate the mount. Comprehensive astronomical data included This includes data on easily observable celestial bodies such as Messier objects, NGC objects, IC objects, as well as the sun, moon, planets, comets, and dwarf planets. High-precision alignment Alignment on one or two stars already provides a fairly accurate positioning of the mount. Aligning on three or more stars allows for very precise alignment of the mount for high magnifications. The objects are then precisely and centrally placed in the field of view of your telescope. The alignment information is saved and can also be retained when the device is turned off. By leaving the telescope in its current state after an observation, without moving it, you can start the next observation with the same settings. Individual adjustment options The app offers various individual settings like gear play compensation, red night mode, autoguider, variable GoTo speed, and LED brightness, similar to the STAR BOOK TEN controller. You can also set the timing of the objective tube reversal (Meridian Flip) as desired. Even if the object moves south during tracking, you can prevent the telescope tube from reversing. Important Information Not usable on old SX mounts with the old blue Star Book Technical Information about the Wifi Module CPU with 32-bit CISC processor 120 MHz The unit is connected to the mount with a D-SUB 9PIN connector, just like with the STAR BOOK TEN. It features a 6-pin 6-wire modular connector for external autoguider operation. Supported operating systems are Android 6 or higher, iOS 9.0 or higher, WLAN standard: IEEE 802.11b/g/n FEATURESR200SS TelescopeExtremely bright 200 mm f/4 opticsFocal length: 800 mmResolution and limit magnitude: 0.58; 13.3Light-gathering capacity: 816xDimensions and weight: 232 x 700 mm; 5.3 kgAdapters and connections: 31.7 mm eyepiece holder, 60 mm connectionBackfocus: 72.5 +/-5 mmMade in JapanSXD2WL Mount RA gear ring: 180 teeth DEC gear ring: 180 teeth Axis material and diameter: Carbon steel / Decl. 35 mm, RA 40 mm thickness Polar finder telescope: 6x20 mm, PFL-II polar finder Height fine adjustment: 0° to 70°, (fine adjustment +/- 15°, height) Counterweight bar: 20 mm diameter Azimuth adjustment: Worm fine adjustment Power supply: DC12 V; 0.4~1.7 A Maximum load: 15 kg, photographic, without counterweight Counterweight: 1x 1.9 kg and 1x 3.7 kg Tri-tier connection: 45 mm pin Dimensions: 36 cm (H) x 12 cm (W) x 36 cm (L) Weight: 8.8 kg (19.4 lb), without counterweight 32-bit CISC processor 120 MHz Operating system: Android 6 or higher, iOS 9.0 or higher Connection: D-SUB 9PIN connector Autoguider input ST4 Power consumption SXD2WL+Wireless unit: DC12V / 0.3–2.0 A (load 10 kg), 0.4–2.2 A (load 15 kg) SCOPE OF DELIVERYSXD2WL MountWireless ModuleCounterweight: 1.9 kg and 3.7 kgPolar finder telescope, illuminatedAssembly toolsCar cigarette lighter cableR200SS Newton Telescope2 Eyepieces (SLV 20, SLV 5)Tube clampsDovetail mount7x50 finder, illuminatedSXG Aluminium tripod

€5,099.00*
%
Vixen extension sleeve 42–50.8 mm
Eyepiece adapter 42 mm to 50.8 mmFEATURES Adapts 42-mm T-threads for 50.8-mm eyepiece mounts Compatibility: Can be used on flip mirrors to mount 50.8-mm eyepieces Weight: 60 g

€34.00* €42.00* (19.05% saved)
Vixen SX 60 mm to 50.8 mm adapter sleeve
The Vixen SX 60 mm to 50.8 mm adapter sleeve can be screwed on to the thread of a 60-mm focuser for connectionto a 50.8-mm (2") sleeveFEATURES Adapts 60-mm focusers for 50.8-mm eyepieces or flip mirrors. Compatibility: All Vixen OTAs with 60-mm connection Length: 10 mmWeight: 65 gPACKAGE CONTENTS60 mm to 50.8 mm adapter sleeve

€33.00*
BRESSER Messier Maksutov 90/1250 OTA
NEW – now including a high-quality aperture Solar-filter for safe observation of sunspots, eclipses and planet transits. Great telescope for night and solar observation.Like its larger 100mm brother, the 90mm Maksutov has a focal length of 1250mm and is therefore perfectly suited for lunar observations. The telescope is optimally adapted for observations on your balcony because of its compact body size.The best catadioptic design named Maksutov-Cassegrain produces a sharp, crispy and high-contrast image. A perfect telescope for a convenient entry into astronomy. CHARACTERISTICSOptical design: catadioptric telescopeAperture: 90 mm / focal length: 1250 mm / F/13.9Maximum recommended magnification: 180xTelescope for night and solar observationHigh-quality Maksutov-Cassegrain optics with high focal length and extremely sharp imageIdeal for observing the moon and many planetsOptical design: Maksutov-CassegrainOptical coatings: Multi-CoatingUniversal 44 mm Dovetail plate (fits LXD75/Great Polaris/EQ5)Connection thread on tube: Male thread M35 x 1.0mmEconomic beginner's telescopeSCOPE OF DELIVERY Maksutov Optical Tube Assembly 26 mm Super Plössl eyepiece (31.7 mm / 1.25'') Universal 44 mm Dovetail plate (fits LXD75/Great Polaris/EQ5) LED viewfinder Aperture solar-filter Rotatable star map Software Stellarium (via download)

€286.00*