Vixen AP Mount with manual fine Adjustment

The AP-SM mount is an enhancement of the AP mount. Unlike the AP mount, it has an RA motor and is equipped with the STARBOOK ONE controller. The AP mount provides a secure, stable support for your telescope. Thanks to the slip clutch mechanism, the mount can be adjusted quicky to the target object. There is a wide range of optional accessories. The ADVANCED POLARIS mount is ideal for both beginners and advanced observers who require a lightweight travel mount. STYLISH DESIGN The AP mount features an ultra-smooth finish without any projecting parts. Simply place your telescope on the mount and move it to the desired celestial object without having to loosen any clamps! QUICK POLAR ALIGNMENT The slip clutches allow you to adjust the telescope to your target object easily – no more searching for adjustment clamps in the dark! An optional polar meter is available, which enables you to locate the celestial pole when it is hidden by trees or buildings. OPTIONAL POLAR FINDER SCOPE The innovative polar finder scope provides a new way to polar align your telescope. Simply align the stars in the crosshair reticle with the same stars in the night sky. Polar alignment is achieved using 3 reference stars. The polar finder is illuminated to facilitate orientation and switches off automatically after 3 minutes to save battery power. POWER SUPPLY The RA and DEC motor modules are powered by four AA alkaline, Ni-MH or Ni-CD batteries. The RA motor module has a USB Micro-B port for an external power supply. A USB power pack or car charging cable can be used for longer observation sessions. STAR BOOK ONE CONTROLLER The STAR BOOK ONE is a multifunctional and intuitive controller that tracks in the RA and DC axis with a range of different speeds. The tracking options are designed for time-lapse cameras at a wide range of speeds, including sidereal, lunar and solar rates. The controller also offers many useful functions such as backlash compensation, autoguider port, PEC and a built-in red LED light. FEATURES R.A. Worm wheels: 58.4 mm Ø gear wheel with 140 teeth DEC. Worm wheels: 58.4 mm Ø gear wheel with 140 teeth Azimuthal adjustment: Twin adjusting screws Altitude adjustment: Twin adjusting screws Number of ball bearings: 7 Polar finder: Optional Motor: RA stepper motor Tracking: STAR BOOK ONE (max. 60x Slewing) Power supply: USB Micro-B Counterweight bar: 20 mm WHAT’S INCLUDED AP-SM mount 1.0 kg counterweight STARBOOK ONE controller

Simple force of friction keeps the telescope in place. Easily direct the telescope to your desired celestial object without loosening a screw. The friction automatically holds the telescope in position. The AP mount provides a secure, stable support for your telescope. Thanks to the slip clutch mechanism, the mount can be quickly adjusted to the target object. There is a wide range of optional accessories. FEATURES Azimuthal telescope mount with manual fine adjustment Easy to use and quick to install Designed for telescopes up to 8 kg WHAT'S INCLUDED Mount Wheel for fine adjustment

Mount and Tripod. The BRESSER EXOS 2 is a rugged mount with high rigidity and precision tracking for visual observation and astrophotography. The tripod is extremely rigid to suppress vibrations really well. This model is very well machined and has an illuminated polar finder scope and precise graduated circles. A powered twoaxis control (BRESSER Exos Duo) or a GoTo-Kit is available as an optional extra. The BRESSER EXOS 2 can take the weight - depending on length and use of up to 13 kg. This allows you to use refractors of up to 152 mm aperture and mirror telescopes of up to 203 mm aperture.CHARACTERISTICS Stable parallactic mount with fine drive in both axes Ball bearings in both axes for more precise movements Stable height adjustable stainless steel tripod (min. 69 cm / max. 109,5 cm ) Load capacity up to 13 kg payload Retrofittable with the BRESSER Star Tracker Goto Kit ( item no. 4951750 ) Circular bubble for easy horizontal alignment Pole height scale for setting the latitude Scaled graduated circular rings to facilitate finding objects using a star atlas or planetarium software Pole finder scope with optional illumination ( item no. 4964212 ) Tripod weight: 4.7 kg Mount weight: 5.6 kg (without counterweight) Total weight incl. counterweight: 14.8 kg Batteries: not included SCOPE OF DELIVERY BRESSER EXOS-2 mount Adjustable polar finder scope with optional illumination Stainless steel tube field tripod with accessory tray 1x 4.5 kg counterweight

The new BRESSER Nebula 5 EQ/AZ Wifi-Network Mount is a precise and quiet telescope mount – ideal for astrophotography. The controller box offers numerous central connectivity options for various accessories such as cameras, filter wheels, and motor focusers via USB (2.0/3.0), simplifying the setup of a professional astrophotography machine. BRESSER has relied on innovation coupled with quality Made in Italy for this top-notch product. The manufacturer's long experience in mount construction guarantees a high-end device with first-class functionality and utmost reliability. Additionally, the in-house development team in Italy ensures quick response times in technical support and the adaptation of new device drivers. Truly, "Professionals at work!" The mount is controlled via pre-installed web-app software, accessible via WIFI and Ethernet cable connection. The philosophy behind the Nebula GoTo system is to provide the user with a control system independent of a standard PC, which can be remotely controlled via a smart device such as a mobile phone or tablet. However, this does not exclude the traditional use of computers of all types and brands, which can be connected to the system either wired or wirelessly. The BRESSER Nebula GoTo System Controller is a Raspberry Pi 4 microcomputer, which allows complete control of the setup (mount, camera, etc...) without the need for any other external device. The BRESSER Nebula GoTo system comes equipped with all Linux-based applications required for performing all astrophotographic functions.The existing INDI environment allows for the control of almost all devices (cameras, filter wheels, rotators, etc., including observatory domes) needed for local or remote astrophotography sessions. The system also offers high flexibility for users who prefer to use traditional computer client applications such as Cart du Ciel (Star Chart), TheSkyX, SkySafari, Stellarium, and other planetarium programs as well as SGP, Nina, CCD Ciel, and other astrophotography tools. This complete compatibility is ensured through the adoption of the Alpaca communication protocol, which allows for the use of traditional ASCOM platform drivers for native INDI devices.State-of-the-art mount construction The BRESSER Nebula mounts are CNC-manufactured from stainless steel and aluminium. The sleek and functional design is courtesy of a renowned Italian mount manufacturer, who has licensed the design and now manufactures these fine BRESSER products 100%. So, look forward to a stable yet easily portable mount, which despite its light weight of only 13 kg (incl. tripod), allows for a high load capacity of up to 20 kg.Visual Observation For visual observation and direct use, control the mount with the hand control box included in the package. Alternatively, connect the Nebula 5 via WLAN directly to your smartphone or tablet and use the virtual hand control box. Of course, all adjustment parameters can also be set via the web application. The user interface is deliberately simple and clear to ensure intuitive operation.Astrophotography Here, the Nebula mount shows its full strength. Whether mobile or stationary, the capability for remote operation is crucial. Connect your laptop or PC either via WLAN or with an Ethernet cable (recommended for faster data transmission) directly to the Raspberry-Pi control unit of the mount. Then use the pre-installed Kstars/EKOS software to control the mount and all external devices such as cameras, motor focus, filter wheel, etc. Alternatively, you can also directly control the unit with your own software. Applications such as Cart du Ciel (Star Chart), TheSkyX, SkySafari, Stellarium, and other planetarium programs as well as SGP, Nina, CCD Ciel, and other astrophotography tools can be used without any issues.2-in-1 Mount with EQ and AZ Mode If required, the Nebula can be switched from the equatorial mode to the azimuthal mode. This is particularly advantageous for observing nature or tracking satellites. Thus, the mount can be used for various applications and is not limited to astronomy.Attachment of up to two optics Would you like to adapt multiple optics? No problem. Simply use the option to replace the counterweight bar with another telescope. Use the second optic as a counterweight to the main telescope. Set the Nebula 5 to azimuthal mode, remove the counterweight bar, and screw a suitable second telescope clamp directly onto the mount. FEATURES Precise and quiet telescope mount – ideal for astrophotography Extensive connectivity options for various accessories via USB Integrated web app software enables central control of all components Integrated Raspberry Pi with USB-3 ports and Ethernet port Compatible with client applications such as Cart du Ciel (Star Chart), TheSkyX, SkySafari, Stellarium Compatible with SGP, Nina, CCD Ciel, and other astrophotography tools Virtual hand control box and settings menu for smartphones and tablets PC control – ASCOM and INDI compatible USB ports for cameras, motors, filter wheels, etc. Conversion from parallactic to azimuthal mode possible Small hand box for basic functions included High load capacity and yet lightweight Mount CNC-manufactured from stainless steel and aluminium Tooth belt drive for precise and quiet tracking Load capacity: 15 kg in EQ mode and 20 kg in AZ mode Dual prism clamping for Vixen GP and Losmandy Weight of the mount: 8 kg Weight of the tripod: 5 kg SCOPE OF DELIVERY Nebula 5 EQ/AZ Mount Field tripod Central control unit with Raspberry Pi Counterweight: 6 kg (1 piece) Basic hand box Connection cables Power supply 230V/12V/3A

Highly corrected 127mm air-spaced triplet apochromat (with three lenses) and carbon fibre tube and a 2.5" high-precision HEXAFOC focuser. NEW: Now with hybrid viewfinder shoe to accept different viewfinder holders.    Apochromats are the ultimate choice in small to medium sized telescopes: the combination of compactness, transportability, very high image contrast and sharpness together with excellent astrophotographic performance cannot be bested. The advances in glass manufacturing during the last few years have made true apochromats available to more astronomy enthusiasts than ever before. The new Explore Scientific FCD-100 CF Hex represents another major improvement in this field - the overall correction (colour and spherical) is setting new standards in this price class. The optical design shows a polystrehl value of 0.97 indicating a level of correction that is absolutely top of the line.This excellent apochromat is a very versatile telescope: its reasonably fast f-ratio makes for short exposure times when imaging deep sky objects, but it is still of a significant focal length, making higher power planetary and lunar observation comfortable without having to use really high magnification eyepieces. The high contrast and sharpness of the image provide breathtaking views of large objects like the North America nebula or the Andromeda galaxy, as well as tack sharp planetary images. The telescope is lightweight and compact - the dew shield slides down the tube to minimize size for transportation. Revolutionary glass and precision manufacturing come together to deliver a telescope that offers observing and imaging at the highest level. The Carbon Fibre construction allows this telescope to be used on lower capacity mounts, increasing convenience and portability. Although there are smaller instruments available, the combination of aperture and optical excellence at such a low weight and compact tube makes this an excellent travel scope. The well-designed 2.5" HEXAFOC focuser with 10:1 reduction is perfect for both visual and astrophotographic use - the large inner diameter of 65mm prevents vignetting by the focuser when the telescope is used for astrophotography with large sensors (full frame and above).We offer the very popular EXPLORE SCIENTIFIC Triplet ED APO Refractors in 3 different product lines:Essential Line: HOYA FCD-1 Glass lens, AL-Tube, 2.0" Rack & Pinion Focuser with 1:10, 2.0" Star Diagonal 99% Reflectivity (see Part No. 0112084(AL), 0112106(AL), 0112132(AL)), 0112155(CF + 3"FT)). Professional Line: HOYA FCD-100 Glass lens, AL/CF-Tube, 2.5" HEXAFOC Focuser with 1:10, 2.0" Star Diagonal 99% Reflectivity (see Part No. 0112086(AL), 0112108(AL), 0112109(CF), 0112134(AL), 0112135(CF))High-End Line: OHARA FPL-53 Glass lens, Carbon(CF) Tube, 3.0" Feather-Touch Focuser with 1:10, 2.0" Star Diagonal 99% Reflectivity (see Part No. 0112165(CF))SPECIFICATIONSAperture: 127mmFocal Length: 952mmFocal ratio: f/7.5Design: Apochromat with three lenses, two air spaces and FCD-100 glassWeight: 5.2kg, lightweight due to carbon fibre tubeBackfocus: 150mm above 2" adaptorHybrid viewfinder shoe to accept different viewfinder holdersWHAT'S INCLUDED Optical tube with retractable dew-shield2.5" HEX focuser with 1:10 gear reduction  2" Star Diagonal 99% reflectivityTube rings with dovetail plate and handle Extension tubes for focuser (2pcs)Dust caps for front-lens and focuserHybrid viewfinder shoe 

High-quality, stable aluminium tripod for a variety of mounts with 45 mm connections. The aluminium profile ensures firm positioning with a minimum amount of vibration. Suitable for GP2, GPD2, AP, SX, SXP, SXP2 and AXJ mounts or similar with 45 mm connections. FEATURES Robust aluminium tripod without mount Suitable for: GP-, SX- & AP mounts Height-adjustable: 81 - 130 cm Weight: 5.5 kg WHAT’S INCLUDED Aluminium tripod Adjustment pins for GP2, GPD2, AP and SX mounts

This accessory includes a compass with a spirit level and a height scale. The compass helps you to quickly locate the polar star when it is hidden behind trees or a mountain. The compass attaches to the accessory shoe on the Polarie Star Tracker or a device with a camera accessory shoe. FEATURES Compass Oil-filled compass Azimuth dimensions: 1° steps Height adjustment: 5° steps (max. +/- 70°) Markings: marked with luminous paint Spirit level: Built-in spirit level DELIVERY CONTENTS QPL compass