Vixen ASG-CB90 Carbon Tripod

Very lightweight and portable tripod for heavy mounts

  • 2-section carbon tripod
  • Lightweight and portable
  • Stable design with minimal vibrations
  • For GP2, GPD, SX and AXJ mounts
  • Dimensions: 545 mm to 900 mm length
  • Weight: 3.4 kg

€535.00*

Available, delivery time: 1-3 days

Product number: X000024
EAN: 4955295251643
WEEE-Reg.-Nr.: DE 34323861

With BRESSER, you can enjoy a smooth introduction to the vast world of astronomy. Our detailed information ("Telescope Guide") provides valuable tips for beginners—but even experienced astronomers can use the information we provide (e.g., tables for the geographical latitude of all major world cities) as a reference.

Here is the table of contents of the comprehensive BRESSER Telescope Guide:

Sky Guides von Bresser

Der Sky Guide bietet umfassende Informationen zu Sternbildern, Planetenpositionen und astronomischen Ereignissen – ideal, um Ihre Beobachtungen zu planen und noch tiefer in die Astronomie einzutauchen. 
Besuchen Sie den Guide direkt hier, um das Beste aus Ihren Beobachtungen herauszuholen!
Product information "Vixen ASG-CB90 Carbon Tripod"
Despite being developed for heavy mounts, the Vixen ASG CB90 carbon tripod is one of the lightest tripods on the market.
The ASG CB90 tripod was originally designed for the new AXJ mount. However, it is also ideally suited to the tried-and-tested SX, HF2, AP, GPD2 and GP2 mounts.
The hand nuts can be loosened to extend the tripod by one section.
The legs of the ASG CB90 tripod can be secured by a reliable screw cap and are equipped with a 2.5 cm interval scale marking.

FEATURES
  • 2-section carbon tripod
  • Lightweight and portable
  • Stable design with minimal vibrations
  • Dimensions: 545 mm to 900 mm length
  • Connections: 45 mm pin hole
  • Weight: 3.4 kg

WHAT’S INCLUDED
  • Carbon tripod

Colour: black/white
Material: Carbon

Accessories

Geschenkgutschein über 50€
BRESSER Geschenkgutschein über 50€ Jedes Jahr kommen Geburtstage, Jahrestage, Weihnachten und Co. unaufhaltsam auf uns zu. Und mit ihnen immer wieder die gleiche Frage: Wie können wir unseren Lieben zu diesen ganz besonderen Gelegenheiten eine Freude machen? Schicken Sie mit einem BRESSER-Gutschein Männer, Frauen und Kinder auf ganz individuelle Entdeckungsreisen. Schenken mit Weitsicht – der BRESSER Gutschein über 50 Euro Ein Geschenk bereitet beiden Seiten nur Freude, wenn es zum beschenkten Menschen passt. So erkennen Sie, dass ein Geschenkgutschein von BRESSER garantiert mit einem freudigen Lächeln belohnt wird: Treffen mehrere oder eine der folgenden Aussagen zu? Der oder die Beschenkte … … richtet bei jeder sternenklaren Nacht den Blick durch das Teleskop in den Himmel. … nimmt im Urlaub immer erst mal eine Bodenprobe, die dann noch im Hotel unter dem Mikroskop genau durchleuchtet wird. … liebt es, beim Wandern, Campen oder Jagen mit offenen Augen durch die Natur zu gehen. … betreibt mit Leidenschaft ein eigenes Fotostudio. … verpasst niemals die Wettervorhersage. … zeigt Begeisterung für innovative Technik und neue Gadgets. … ist für alles offen und stets bestrebt, den eigenen Horizont zu erweitern. Treffer? Dann haben Sie mit einem BRESSER Gutschein das passende Geschenk gefunden. Denn egal ob absoluter Anfänger oder leidenschaftlicher Profi: Die vielfältigen Produkte aus den Bereichen Astronomie, Mikroskopie, Sport-Optiken, Fotostudio, Wetter & Zeit und Electronics ermöglichen Ihren Lieben wundervolle Einblicke in faszinierende Welten. Und das gilt nicht nur für die großen Entdecker: Überraschen Sie mit einem BRESSER Gutschein Kinder, die sich mit unserem altersgerechten Angebot spielerisch an die Wissenschaft annähern. So geht’s zum 50-Euro-Gutschein von BRESSERSie möchten einem lieben Menschen neue Perspektiven eröffnen? Nichts leichter als das: Wählen Sie eins der schönen Gutscheinmotive aus. Astronomie, Mikroskopie, Electronics etc. – für jedes Interessengebiet ist ein toller Look dabei. Wichtig: Egal welches Motiv Sie wählen, jeder Geschenkgutschein ist natürlich im ganzen Shop auf bresser.de einlösbar. Tragen Sie Ihren und den Namen des/der Beschenkten ein. Anschließend können Sie eine Nachricht in bis zu 300 Zeichen verfassen, die Ihren Gutschein zu einem ganz persönlichen Geschenk macht. Jetzt nur noch in den Warenkorb legen und bezahlen. Ist der Bestellvorgang abgeschlossen, kommt der Geschenkgutschein als PDF direkt in Ihr E-Mail-Postfach. Von dort können Sie ihn als digitalen Gruß aus der Ferne weiterschicken. Oder Sie drucken ihn aus und übergeben ihn persönlich. Verschenken Sie einen Blick über den Tellerrand – mit dem BRESSER 50-Euro Gutschein für Frauen, Männer und Kinder. 

€50.00*
%
VIXEN 35655 Carry Bag for OTA & tripod
Safe and convenient bag to transport your OTA or tripod to your observing site. Holds many size tubes. Wrap the optical tube in the protective cloth with Velcro tape and secure it to the wall inside the carrying bag. Includes 2 accessory pouches to store a finder scope and flip mirror. Reflective tape on the carry strap increases visibility at a dark site.Suggested tubes and tripods: A80M ; A80Mf ; A70Lf ; ED103S; AX103S ; SXGHAL130 and SXG-AL130 TripodFEATUREScarry bag for tubes & tripod maximum optical tube size: 850x125mm (L&W)reflective tape on handles prevent lossSCOPE OF DELIVERY1x Vixen Carry Bag2x accessory pouches

€47.00* €93.00* (49.46% saved)
Vixen SXG Half Pillar for GP, AP & SX Mounts
For mounting a GP2, GPD2, SX or AP mount with 45mm base on the SXG or AP tripod. Prevents long telescopic tubes from hitting the mount. FEATURES Suitable for SX, SXD2, SXP, GP2, GPD2, SKYPOD, HF2 GPD and GP mounts with 45mm connectorHeight 207mm Diameter 130mmWeight 1,8 kg SCOPE OF DELIVERY Half PillarAdjustable pivot for GP2, GPD2, AP and SX mounts

€199.00*
%
Vixen Universal Tripod Accessory Pouch
The soft padded Vixen accessory bag can be attached to a tripod, keeping your accessories close at hand. The bag is exactly the right size for the Polarie U Star tracker. But also other accessories, such as a camera lens, batteries or the remote control of your camera can be stored safely and within reach in this soft bag. The neoprene material, which absorbs shocks excellently and offers good thermal insulation, protects your accessories extremely well. and protects your batteries and USB battery packs from extreme cold. FEATURESAccessory bag for attaching to a tripod Perfect fit for the Polarie U Star Tracker Suitable to keep all kinds of accessories clos at hand Material: neoprene, polyester Dimensions: 11 x 13 cm Weight: 95 g SCOPE OF DELIVERYTripod accessory bag Fastening strap

€16.00* €32.00* (50% saved)
Vixen HF2 Fork Mount
The HF2 mount is an azimuthal fork mount for mounting large binoculars. It also requires the X000161 mounting plate for attachment of different binocular types. Not required with the BT126S-A. FEATURES Can be used with: SXG-HAL130, SXG-AL130, APP-TL130 Bearing capacity: 13 kg Weight: 3.4 kg WHAT’S INCLUDED HF2 fork mount Mounting tool

€345.00*
%
Vixen AP Mount with manual fine Adjustment
The AP mount provides a secure, stable support for your telescope. Thanks to the slip clutch mechanism, the mount can be adjusted quickly to the target object. There is a wide range of optional accessories. The ADVANCED POLARIS mount is perfect for both beginners and advanced observers who require a lightweight travel mount. STYLISH DESIGN The AP mount features an ultra-smooth finish without any projecting parts. Simply place your telescope on the mount and move it to the desired celestial object without having to loosen any clamps! QUICK POLAR ALIGNMENT The slip clutches allow you to adjust the telescope to your target object easily – no more searching for adjustment clamps in the dark! An optional polar meter is available, which enables you to locate the celestial pole when it is hidden by trees or buildings. OPTIONAL POLAR FINDER SCOPE The innovative polar finder scope provides a new way to polar align your telescope. Simply align the stars in the crosshair reticle with the same stars in the night sky. Polar alignment is achieved using 3 reference stars. The polar finder is illuminated to facilitate orientation and switches off automatically after 3 minutes to save battery power. OPTIONAL POWER SUPPLY The RA and DEC motor modules are powered by four AA alkaline, Ni-MH or Ni-CD batteries. The RA motor module has a USB Micro-B port for an external power supply. A USB power pack or car charging cable can be used for longer observation sessions. OPTIONAL STAR BOOK ONE CONTROLLER The STAR BOOK ONE is a multifunctional and intuitive controller that tracks in the RA and DC axis with a range of different speeds. The tracking options are designed for time lapse cameras at a wide range of speeds, including sidereal, lunar and solar rates. The controller also offers many useful functions such as backlash compensation, autoguider port, PEC and a built-in red LED light. The STAR BOOK ONE controller is designed for the AP-SM mount and is an integral part of the RA motor module. NOTE The STAR BOOK ONE controller is not sold separately but is only available with the Motor Module Set! FEATURES R.A. Worm wheels: 58.4 mm Ø gear wheel with 140 teeth DEC. Worm wheels: 58.4 mm Ø gear wheel with 140 teeth Azimuthal adjustment: Twin adjusting screws Altitude adjustment: Twin adjusting screws Number of ball bearings: 7 Polar finder: Optional Motors: Optional Tracking: Manual fine adjustment Counterweight bar: 20 mm WHAT’S INCLUDED AP mount 1.0 kg counterweight

€699.00* €829.00* (15.68% saved)
%
Vixen AP-Z azimuthal Mount with Slip Clutch
Simple force of friction keeps the telescope in place. Easily direct the telescope to your desired celestial object without loosening a screw. The friction automatically holds the telescope in position. The AP mount provides a secure, stable support for your telescope. Thanks to the slip clutch mechanism, the mount can be quickly adjusted to the target object. There is a wide range of optional accessories. FEATURES Azimuthal telescope mount with manual fine adjustment Easy to use and quick to install Designed for telescopes up to 8 kg WHAT'S INCLUDED Mount Wheel for fine adjustment

€544.00* €679.00* (19.88% saved)
Vixen camera tripod head adapter
Want to use your camera tilt head with our fixed Vixen tripods? Then all you need is our tripod head adapter. It can be mounted on the tripod in seconds using the central screw, then you can simply attach your tripod head using the 1/4" connection. The adapter can be used on all GP, GP-DX, AP and Sphinx tripods with 45-mm connection. FEATURESFor mounting a tripod head on a Vixen tripodTripod mount: 45 mmFor video fluid head with 1/4" screw Weight: 380 gPACKAGE CONTENTSCamera tripod head adapter

€72.00*
%
Vixen AXJ GoTo Mount with Star Book Ten Controller
Designed as a complement to the AXD2 equatorial mount, the AXJ mount offers outstanding durability and precision. The AXJ mount can also be used on AXD-TR102 tripods with an adapter. Periodic errors on mounts are usually measured and corrected by the user. Unlike the old StarBook controller, the STAR BOOK TEN controller saves these errors permanently. The periodic error of the mount is measured in the factory (total of 12 points per 30 degrees worm gear) and corrected before delivery. This is known as V-PEC and functions automatically as soon as you use the mount. It delivers an accuracy of +/- 4.0 arc seconds. You can increase the tracking accuracy further by saving your own recorded periodic errors. Vixen uses a new Belt-drive system in the AXJ mount. The gear drive was replaced with a toothed belt drive. This gives the mount a quicker reaction time and lower backlash. It also helps to minimize noise. The 6x20 polar finder scope is pre-installed. This allows the user to configure the polar alignment (for both the northern and southern hemispheres). The polar finder scope has a variable illuminated reticle with an automatic power-off function. The brightness can be adjusted in 8 levels so that the user can configure the desired brightness. SETTING ACCURACY OF LESS THAN 3 ARC MINUTES The dark field illumination (red LED) turns on when the push button is pressed. The reticle also lights up in red so that the observer can recognize and align stars in the background of the reticle. The light turns off automatically after a few minutes to save battery power. 2 bearing sets (4 pieces) are used for the shaft of the RA axis. Thanks to the newly developed EQ design, the ZXJ mount has a higher load capacity of 22 kg. As the motors, worm shaft and worm gear are located in the lower part of the mount, fewer counterweights are required than with conventional mounts. The STAR BOOK TEN controller is a modern control system with a high-resolution colour monitor. The STAR BOOK TEN system contains more than 272,000 celestial objects, including 260,000 stars from the SAO catalogue, 109 Messier objects, 7840 NGC objects and 5380 IC objects, as well the soon, moon and planets. Objects can be accessed by name, and information such as images and data can be defined separately. FEATURES +/-4.0 arc seconds with V-PEC V-PEC (Vixen-Permanent Periodic Error Correction) Belt drive system (prevents backlash and minimizes noise) 14 ball bearings Polar alignment (variable fork fix type) Polar finder with reference star alignment STAR BOOK TEN controller with autoguider input Retractable counterweight bar WHAT’S INCLUDED AXJ mount Starbook Ten controller 2 counterweights (3.7 kg and 1.5 kg) GoTo mount with Star Book Ten controller 22 kg load (photographic)

€5,990.00* €7,499.00* (20.12% saved)
Vixen SPHINX PROFESSIONAL SXP2 equatorial GoTo Mount
Compared with previous models, the new SXP2 mount features larger bearings in order to increase the accuracy and load capacity. The mounting housing is made from a stronger material than the previous SX mounts. The equatorial head is clamped into a fork in order to increase the stability of the polar alignment wedge. Precise tracking with P-PEC function The SXP2 mount comes with the modern STARBOOK TEN control system. This includes a P-PEC function for precise tracking. PEC stands for “Periodic Error Corrections” and corrects errors in the mechanics which lead to periodic errors in the gear systems. The P-PEC function, which is based on the PEC function, is designed for the SXP2 equatorial mount. The P-PEC function saves the records of corrections, even after the power supply to the mount has been switched off. It is not necessary to re-enter the data each time, which enables a quicker setup and more precise tracking. The belt drive system minimizes backlash and noise Conventional motor-driven systems on equatorial mounts use gear wheels, which are driven by the motor. However, this design generates backlash under the gear wheels, which can lead to inaccuracies. To avoid these errors, the drive was converted to a belt drive system. This drastically reduces the backlash of the gear unit, as well as the noise generated by the drive system. It also ensures a quicker reaction when corrections are required. 16 bearings The mechanical parts contain a total of 16 bearings. The SXP2 mount uses a set of tapered roller bearings for the RA axis in order to provide additional stability for more precise tracking. Stable polar alignment wedge The SXP2 mount uses the same fork as the heavy AXJ mount. This new construction enables a quick and stable configuration of the latitude setting. Simple and precise polar alignment via reference star The 6x20 polar finder scope is pre-installed. This allows the user to configure the polar alignment (for both the northern and southern hemispheres). The polar finder scope has a variable illuminated reticle with an automatic power-off function. The brightness can be adjusted in 8 levels so that the user can configure the desired brightness. The polar finder scope can be configured directly via three reference stars and can reach an accuracy of up to 3 arc minutes. Variable mount head The mount head has a diameter of 35 mm and features 8 threaded holes for M8 screws spaced at 45 degrees. An optional accessory tray can be attached to the mount head directly or in combination with an optional mounting wedge for dovetail plates. The threaded holes on the mounting head can also be used to mount rails from other manufacturers. Modern STAR BOOK TEN controller with high-resolution colour display and built-in star chart The STAR BOOK TEN controller is a modern control system with a high-resolution colour monitor. The STAR BOOK TEN system contains more than 272,000 celestial objects, including 260,000 stars from the SAO catalogue, 109 Messier objects, 7840 NGC objects and 5380 IC objects, as well the soon, moon and planets. Objects can be accessed by name, and information such as images and data can be defined separately. A combination of innovative, elegant design and user-friendly features The improved design of the stable and rigid mount body, which features precise tracking with a P-PEC function and the STAR BOOK TEN controller, offers a highly precise, easy to use mount that is guaranteed to please astrophotographers and observers. Special motor mount for lighter counterweight The heavy RA and DEC motor units are built into the bottom of the declination axis to ensure that the centre of gravity of the equatorial head is below the RA and DEC axis. This enables the declination body to function as a counterweight. Thanks to the flat mounting head, the mount can be balanced with a significantly lighter counterweight. Retractable counterweight bar The counterweight bar is made from solid stainless steel with a thickness of 20 mm, and enables the use of all counterweights from the SX and GP mount series. The counterweight bar is housed in the declination body. Accessory shoe The #35511 polar meter can be placed onto the accessory shoe for quick and easy polar alignment. FEATURES RA Sprocket:   73.2 mm Ø brass wheel with 180 teeth DEC sprocket:  73.2 mm Ø brass wheel with 180 teeth Worm shaft:  9 mm Ø brass shaft  RA and DEC axis:  40 mm Ø carbon steel bearing, 16 bearings Counterweight bar:  20 mm Ø RA Setting circles: 0.1 minute steps (with StarBook TEN) Polar finder scope:  PF-L Polar Scope 6x20mm Stepper motors: 250 PPS speed maximum 1000x sidereal rate Maximum load:  17 kg photographic without counterweight Power connection:  DC 12 V, 0.45-2.2 A  Dimensions:  386mm x 419mm x 128 mm Weight of equatorial head:  13.3 kg without counterweight Counterweight: 3.7 kg SCOPE OF DELIVERY 3.7 kg and 1,9 kg counterweight SXP2 mount STARBOOK TEN controllerCablePower cord for Cicgar socket2032 batteryassembly tool  

€4,799.00*

Customers also viewed

Vixen APP-TL130 Tripod for AP, GPD & SX Mounts
The APP-TL130 tripod is a lightweight, portable tripod for all standard Vixen mounts with a 45 mm support. Compatible tripods include the Vixen HF2, SX, AP and AXJ mounts. The tripod is adjustable in 3 sections and can be retracted to a very small size. Weighing just 3 kg, it is ideal for astronomy trips. FEATURES Leg section: 3x extendable Maximum extended height: 1296 mm Minimum retracted height: 598.4 mm Material: Aluminium Weight: 3.0 kg Maximum height: 1159 mm (height above the ground) Minimum height: 526 mm (height above the ground) WHAT’S INCLUDED Aluminium tripod Adjustment pins for GP2, GPD2, AP and SX mounts

€209.00*
Vixen TR102 tripod for AXD mount
Ultra sturdy tripod for AXD and AXD2 mounts.The tripod is vibration resistant and features 2 extendable sections.FEATURESVixen TR102 tripod for AXD/AXD2 mount Dimensions: Ø 55mmLength of legs: 760 mm to 1018 mmTripod height: 690 mm to 915 mmHolder: Base with 440 mm to 570 mm radiusWeight: 13.3 kgDELIVERY CONTENTTR102 tripod

€1,599.00*
Vixen SXG-HAL130 Aluminum Tripod for GP, SX & AP Mounts
High-quality, stable aluminium tripod for a variety of mounts with 45 mm connections. The aluminium profile ensures firm positioning with a minimum amount of vibration. Suitable for GP2, GPD2, AP, SX, SXP, SXP2 and AXJ mounts or similar with 45 mm connections. FEATURES Robust aluminium tripod without mount Suitable for: GP-, SX- & AP mounts Height-adjustable: 81 - 130 cm Weight: 5.5 kg WHAT’S INCLUDED Aluminium tripod Adjustment pins for GP2, GPD2, AP and SX mounts

€276.00*
%
Vixen flight case for VC200L/VMC200
Transport case for VMC and VC reflector telescopes.The case protects your telescope against dirt and impacts.Tailor-made, sturdy aluminium case with space for storing small accessories.FEATURESTransport case for Vixen VMC and VC reflector telescopesTailor-made for VC and VMC 200Dimensions: 335 mm x 670 mm x 270 mmWeight: 6.2 kgDELIVERY CONTENTCarry case for VC200L/VMC200Key

€199.00* €399.00* (50.13% saved)
BRESSER BX-5 Pro Video-Tripod
The BRESSER BX-5 Pro is a professional tripod that can be used in a variety of ways. This tripod is suitable for a carrying weight up to 5 kg, making it ideal for the heaviest spotting scopes in the BRESSER range. By means of Twist-Lock closures the height can be adjusted quickly and easily with one hand. The many features such as the monopod function or the 180° folding legs make the tripod a versatile companion. Whether in the field or in the studio, this device offers a variety of uses. Rubber feet provide stability. FEATURES Tripod for rough terrain Individually height-adjustable tripod legs Tripod load capacity (as a set): 5 kg Liquid-mounted video head with 5 kg capacity Tripod load capacity: 20 kg Photo pine Lightweight aluminum Additional spikes included Monopod function Light 3,1kg gross weight Fast twist Lock Legs SCOPE OF DELIVERY Tripod Carrying Case Video Head Allen spikes instructions

€209.00*
%
BRESSER Field Tripod ST-3 stainless steel
The BRESSER Field Tripod ST-3 is a solid and height-adjustable tripod with double tripod leg clamp and made of corrosion-resistant stainless steel. It is suitable for direct usage with the BRESSER Slider Binocular Mount. Adjust the extendable stainless steel tripod to the desired base height and thereby pre-select your favourite observation position. For example, for landscape observation while standing or sitting, the full tripod height should be used. For night sky observation, a lower setting is recommended to ensure a comfortable viewing position while sitting or lying down. The tripod is equipped with a standard GP mounting head and a central screw with metric M10 threaded shaft. It is also suitable for EXOS-1 and EXOS-2 EQ mounts. The upper tripod leg tubes have a diameter of 50.8 mm (2 inches).FEATURESFor usage with BRESSER Slider Binocular Mount Standard GP mount head Also suitable for EXOS-1 and EXOS-2 EQ mounts Solid stainless steel and aluminium structure Double tripod leg clamp Height adjustable approximately from 68 to 110 cm Tripod weight: 5.5 kg Transport length approximately 87 cmUpper tripod leg tubes have a diameter of 50.8 mm (2 inches)SCOPE OF DELIVERYTripod Accessory tray Central spindle

€122.00* €199.00* (38.69% saved)