Vixen cigarette lighter adapter for GP

Portable power storage (mobile power bank) in maxi format from BRESSER. With a powerful and rechargeable 155Wh lithium-ion battery and various connection options, almost all common electronic devices can be operated and charged. This means that you always have sufficient energy reserve, whether for tough outdoor use, in the garden or in the event of a power failure at home. Including a switchable red light LED lamp with emergency signal function and a red light bar for orientation in the dark with over 100 hours of light duration. The Mobile Power Station is a silent and environmentally friendly alternative to power generators with combustion engines. With the built-in solar charge controller, the Power Station can also be charged directly with a solar panel (available as an option). Connection options: Charging of up to 3 x USB mobile devices such as telephones, cameras, drones etc. at the same time. Includes 1 x USB quick charge output with Qualcomm Quick Charge 3.0 support. Power supply for up to 3 x 12 volt devices. With the 2 adapters of 5.5/2.1mm hollow plug to cigarette lighter socket included in delivery, car/camping devices such as refrigerators, water pumps, mini compressors, air pumps etc. can be connected directly. In addition, a 230 volt, 100 watt continuous power socket can be used to connect chargers for notebooks/tablets/smartphones etc. or other electrical devices in this power class. The heart is the built-in battery: A powerful 155Wh 13Ah/12Volt (42000mA/3.7V) lithium-ion battery. Rechargeable within 8 hours with the included 230V charger or 12V car battery charging cable. A clear display shows you all relevant information such as battery charge status, battery charging process, AC output ON/OFF. Extensive electronic protection of all current inputs and outputs: against short circuit, overvoltage, over- and deep discharge of the battery and against overheating. Please note that for use with our astronomy mounts, such as the EXOS-2 Goto, the adapter cable 4930100 is additionally required.FEATURESPortable energy storage (Power Bank)Self-sufficient power supply for outdoor, hobby and professional useCharging and operation of various electrical appliancesMany connection options and adapters includedEnvironmentally friendly alternative to power generatorsPowerful 155Wh 13Ah/12 Volt (42000mA/3.7V) lithium ion battery3 x USB (each 5-9 Volt 2.1 Ampere), includes 1 x USB quick charge output with Qualcomm Quick Charge 3.0 support3 x 12 Volt DC out 5.5/2.1mm hollow plug (additional max. 15 Ampere /180 Watt)1 x 230 Volt AC out (100 Watt continuous power)Modified sine wave for 230 Volt outputSimultaneous charging and power extraction possibleElectronic charge monitoring and switch-offBright red light LED lamp with over 100 hours light durationSOS function of the LED lamp by selectable flashing functionRed light bar can be switched on as an orientation aid in the darkIndication of battery charge status on displayInput charging socket: 13-25 Volt / 2 Ampere / input protection circuit existsCharging time 0-100% approx. 8 hoursIntegrated solar charge controller for direct charging via solar panelTemperature range: from -10 to +40 degrees CelsiusLifetime/charging cycles: >500 times SCOPE OF DELIVERYPower Station with batteryCharger 230 VoltCar charger 12 VoltAdapter 5.5/2.1mm to cigarette lighter socket (2 pcs.)UK socket adapter for 230V outputInstruction manual

The Polar fine adjustment unit is an accessory designed for installation of star tracking mounts such as POLARIE and the AP Star Tracker System with attachment between the photo stand and the star tracking mount. This device enables fine horizontal and vertical adjustment with installation of a polar axis target. The swivel head, which is designed exclusively for use on the base of star trackers, can be secured or removed with a single screw. The twin screw system for inclination and azimuth adjustment ensures fine movement and rigid locking. The adjustable inclination angle of 0ﾟ～85ﾟ enables use in a range of positions and situations. The fine adjustment range can be adjusted in three steps of low (0-30 degrees), medium (30-60 degrees) and high (60-85 degrees). FEATURES Fine adjustment unit for precise pole alignment For use on the AP and Polarie Star Tracker Adjustment range from 0° to 85° Photo stand connection (for 1/4'' and 3/8'' screws) Weight: 300 g WHAT’S INCLUDED Fine adjustment unit Allen key Adapter for 3/8'' screw

With the BRESSER portable power supply, you won't need to worry about running out of power when you're out and about. Ideal for smartphones, tablets and laptops, the high-performance 88.8 Wh lithium-ion rechargeable battery will get your devices up and running again in no time. The portable power supply also comes with all standard connections, including five USB outputs, a DC output and an AC output. Weighing just 1.04 kg, the power supply has an ultra-lightweight design - perfect for excursions and on-the-go use. Eco-friendly power solution With the BRESSER power supply, you won't need to worry about finding a socket when you're out camping, relaxing by the lake or on a hike. What's more, the built-in battery takes just 5 hours to fully charge. Thanks to its silent design, it offers an eco-friendly alternative to power generators fuelled by combustion engines. You can also harness energy from the sun: instead of using the supplied adapter, you can connect an optional solar charger (not included) to charge the built-in battery. Another practical feature is the ultra-bright built-in LED, which can be used as a torch when you're out and about or during a power cut at home. In addition to 3 brightness levels, the light also features an SOS mode. Discover the BRESSER portable power supply - your compact and lightweight companion for powering your everyday needs! FEATURES Power: 88.8 Wh, 6 Ah / 14.8 V Small and compact design: 165 x 80 x 117 mm Lightweight design: approx. 1.04 kg High-performance lithium-ion battery Charging time (for full charge): Approx. 5 hours Recharges via adapter or optional solar module (not included) USB outputs: 2 x USB 5 V / 2.4 A, total: 4.8 A max. 2 x USB 5-12 V / 2 A QC 3.0 (18 W max., total: 5 V / 3.4 A max.) 1 x USB-C 5 V / 3 A, 9 V / 2 A, 12 V / 1.5 A (PD 2.0 18 W max.) DC output: 12-16.8 V / 10 A, total 13 A max. AC output: Modified sine wave output; AC voltage: 100/110/120/220/230/240 V/AC ± 10 %, output frequency: 50/60 Hz ± 10 % Large LED light with SOS function Protected against short circuits, overcurrent, overvoltage undervoltage, overload and overheating PACKAGE CONTENTS Portable power supply Power adapter Micro USB cable Instruction manual

The set consists of the R.A. motor module and the STAR BOOK ONE control. It allows you to equip your manual AP mount with motor-controlled RA tracking.The STARBOOK ONE control features different speeds and is suitable for both the northern and southern hemispheres.Objects are tracked precisely with a motor, meaning there is no need for manual adjustments.The controller has an autoguider port with an ST 4 interface for photography.The R.A. motor module and the STAR BOOK ONE controller are only sold together and are not available separately.FEATURES Gear drive: 73.5 mm Ø, 140 teeth Worm: 11.0 mm Ø brass worm Number of ball bearings: 2 Rotation axis: 45 mm Ø, aluminium Motor: Stepper motor Controller connection: D-SUB 9-pin male Power supply: USB Micro-B (4.4 - 5.26 V)Delivery contentSTARBOOK ONE controllerConnection cableMotor moduleMounting screwsMounting tool

The Vixen SX cigarette lighter adapter can be easily plugged into the cigarette lighter in your car or into a portable power station with this connection type, so you can power your devices from almost anywhere.FEATURESSuitable for SXC, SXW, SXD, SXD2, SXP, SXP2, AXJ, AXD2 and Skypod mounts. Compatible with Starbook S, Starbook, Starbook One and Starbook TenPACKAGE CONTENTSCigarette lighter adapter for SX/SXD/SKYPOD

With the introduction of the 68° Series we are pleased to make two important improvements in eyepiece manufacture, the first being 15 layer Enhanced Multi-layer Deposition (EMD™) coatings on all glass-to-air surfaces to gain maximum contrast, and waterproofing the eyepiece with the use of Argon gas purging instead of standard Nitrogen gas. Although Nitrogen is a fine choice that will last for many years, Argon is a larger molecule that maintains its protective properties over a wider range of temperatures, and is even more resistant to diffusion thereby further extending the protective waterproof environment of the eyepiece body. Through computer-optimized design, a careful selection of optical glasses, and enhanced multi-layer deposition coatings, the Explore Scientific 68° Series™ eyepieces produce long eye-relief and ensure high image-correction, a flat field, and high contrast across the entire image field. An excellent choice for those who make extended visual studies of detail with subtle variations of brightness, and for those who must wear glasses while observing. All 68° Series eyepieces are fully EMD (Enhanced Multi-Layer Deposition) coated and edge-blackened to produce superior contrast.

The new BRESSER Nebula 6 EQ/AZ Wifi-Network Mount is a precise and quiet telescope mount – ideal for astrophotography. The controller box offers numerous central connection options for various accessories such as cameras, filter wheels, and motor focusers via USB (2.0/3.0), simplifying the setup of a professional astro-photography machine. BRESSER relies on innovation paired with quality Made in Italy for this top-class product. The long-standing experience of the manufacturer in mount construction guarantees a high-end device with first-class functionality and highest reliability. Additionally, the in-house development team for hardware and software in Italy ensures quick response times in technical support and the adaptation of new device drivers. True to the motto "Professionals at work!" The mount is controlled via pre-installed web app software, accessible via Wifi and an Ethernet cable connection. The philosophy behind the Nebula GoTo system is to provide the user with a control system independent of a normal PC, which can be remotely controlled in all its functions via a smart device such as a mobile phone or tablet. However, this does not exclude the traditional use of computers of all types and brands, which can be connected to the system either wired or wirelessly. The BRESSER Nebula GoTo System Controller is a Raspberry Pi 4 microcomputer, which allows complete control of the setup (mount, camera, etc.) without the need for any other external device. The BRESSER Nebula GoTo system is already equipped with all Linux-based applications necessary for performing all astrophotographic functions.The existing INDI environment allows the control of almost all devices (cameras, filter wheels, rotators, including observatory domes), necessary for conducting local or remote astrophotography sessions. The system also offers high flexibility for users who prefer to use traditional computer client applications such as Cart du Ciel (Star Chart), TheSkyX, SkySafari, Stellarium, and other planetarium programs as well as SGP, Nina, CCD Ciel, and other astrophotography tools. This complete compatibility is ensured through the adoption of the Alpaca communication protocol, which allows the use of traditional ASCOM platform drivers for native INDI devices. State-of-the-art mount construction The BRESSER Nebula mounts are CNC-manufactured from stainless steel and aluminum. The simple and functional design is thanks to a renowned Italian mount manufacturer, who has designed and now also manufactures these fine BRESSER products 100%. So, look forward to a stable yet easily transportable mount, which despite its light weight of only 16 kg (including tripod) allows a high load capacity of up to 25 kg. Visual Observation For visual observation and direct use, control the mount with the hand control box included in the package. Alternatively, connect the Nebula 6 via WLAN directly to your smartphone or tablet and use the virtual hand control box. Of course, all adjustment parameters can also be adjusted via the web application. The user interface is deliberately simple and clear to ensure intuitive operation. Astrophotography Here, the Nebula mount shows its full strength. Whether mobile or stationary, remote capability is crucial. Connect your laptop or PC either via WLAN or with an Ethernet cable (recommended for faster data transfer) directly to the Raspberry-Pi control unit of the mount. Then use the pre-installed software Kstars/EKOS to control the mount and all external devices such as cameras, motor focus, filter wheel, etc. Alternatively, you can also directly control the unit with your own software. Applications such as Cart du Ciel (Star Chart), TheSkyX, SkySafari, Stellarium, and other planetarium programs as well as SGP, Nina, CCD Ciel, and other astrophotography tools can be used without any issues. 2-in-1 Mount with EQ and AZ Mode If required, the Nebula can be switched from the equatorial mode to the azimuthal mode. This is particularly advantageous for observing nature or tracking satellites. Thus, the mount can be used for various applications and is not limited to astronomy only. Attachment of up to two optics Would you like to adapt multiple optics? No problem. Simply use the option to replace the counterweight bar with another telescope. Use the second optic simply as a counterweight to the main telescope. Set the Nebula 6 to azimuthal mode, remove the counterweight bar, and screw on an extension adapter with a suitable second telescope clamp directly to the mount. FEATURES Precise and quiet telescope mount – ideal for astrophotography Extensive connection options for various accessories via USB Integrated web app software enables central control of all components Integrated Raspberry Pi with USB-3 ports and Ethernet port Compatible with client applications such as Cart du Ciel (Star Chart), TheSkyX, SkySafari, Stellarium Compatible with SGP, Nina, CCD Ciel, and other astrophotography tools Virtual hand control box and settings menu for smartphones and tablets PC control – ASCOM and INDI compatible USB ports for cameras, motors, filter wheels etc. Conversion from parallactic to azimuthal mode possible Small hand box for basic functions included High load capacity yet lightweight Mount CNC-manufactured from stainless steel and aluminum Tooth belt drive for precise and quiet tracking Load capacity: 18 kg in EQ mode and 25 kg in AZ mode Dual-prism clamping for the attachment of Vixen GP and Losmandy Weight of the mount: 11 kg Weight of the tripod: 5 kg SCOPE OF DELIVERY Nebula 6 EQ/AZ Mount Field tripod Central control unit with Raspberry Pi Counterweight: 6 kg (1 piece) Basic hand box Connection cables Power supply 230V/12V/3A