Vixen cigarette lighter adapter for SX/SXD/SKYPOD

12 V replacement adapter cable for power adapter #3599Compatible with SX, AXJ and AXD2 mounts.This cable is included with the power adapterFEATURESConverts to inside + polarityCompatible with SX, AXJ and AXD2 mounts.DELIVERY CONTENTVixen cable adapter

Portable power storage (mobile power bank) in maxi format from BRESSER. With a powerful and rechargeable 155Wh lithium-ion battery and various connection options, almost all common electronic devices can be operated and charged. This means that you always have sufficient energy reserve, whether for tough outdoor use, in the garden or in the event of a power failure at home. Including a switchable red light LED lamp with emergency signal function and a red light bar for orientation in the dark with over 100 hours of light duration. The Mobile Power Station is a silent and environmentally friendly alternative to power generators with combustion engines. With the built-in solar charge controller, the Power Station can also be charged directly with a solar panel (available as an option). Connection options: Charging of up to 3 x USB mobile devices such as telephones, cameras, drones etc. at the same time. Includes 1 x USB quick charge output with Qualcomm Quick Charge 3.0 support. Power supply for up to 3 x 12 volt devices. With the 2 adapters of 5.5/2.1mm hollow plug to cigarette lighter socket included in delivery, car/camping devices such as refrigerators, water pumps, mini compressors, air pumps etc. can be connected directly. In addition, a 230 volt, 100 watt continuous power socket can be used to connect chargers for notebooks/tablets/smartphones etc. or other electrical devices in this power class. The heart is the built-in battery: A powerful 155Wh 13Ah/12Volt (42000mA/3.7V) lithium-ion battery. Rechargeable within 8 hours with the included 230V charger or 12V car battery charging cable. A clear display shows you all relevant information such as battery charge status, battery charging process, AC output ON/OFF. Extensive electronic protection of all current inputs and outputs: against short circuit, overvoltage, over- and deep discharge of the battery and against overheating. Please note that for use with our astronomy mounts, such as the EXOS-2 Goto, the adapter cable 4930100 is additionally required.FEATURESPortable energy storage (Power Bank)Self-sufficient power supply for outdoor, hobby and professional useCharging and operation of various electrical appliancesMany connection options and adapters includedEnvironmentally friendly alternative to power generatorsPowerful 155Wh 13Ah/12 Volt (42000mA/3.7V) lithium ion battery3 x USB (each 5-9 Volt 2.1 Ampere), includes 1 x USB quick charge output with Qualcomm Quick Charge 3.0 support3 x 12 Volt DC out 5.5/2.1mm hollow plug (additional max. 15 Ampere /180 Watt)1 x 230 Volt AC out (100 Watt continuous power)Modified sine wave for 230 Volt outputSimultaneous charging and power extraction possibleElectronic charge monitoring and switch-offBright red light LED lamp with over 100 hours light durationSOS function of the LED lamp by selectable flashing functionRed light bar can be switched on as an orientation aid in the darkIndication of battery charge status on displayInput charging socket: 13-25 Volt / 2 Ampere / input protection circuit existsCharging time 0-100% approx. 8 hoursIntegrated solar charge controller for direct charging via solar panelTemperature range: from -10 to +40 degrees CelsiusLifetime/charging cycles: >500 times SCOPE OF DELIVERYPower Station with batteryCharger 230 VoltCar charger 12 VoltAdapter 5.5/2.1mm to cigarette lighter socket (2 pcs.)UK socket adapter for 230V outputInstruction manual

Portable power storage (mobile power bank) in maxi format by BRESSER The energy you need in every situation: that's what the mobile Power Station 500 Watt by BRESSER offers you. Whether for tough outdoor use, van life, in the garden or the event of a power failure at home - with the various connection options, you can operate and charge almost all common electronic devices via the powerful and recharcheable 520Wh lithium-ion battery. Perfect for notebooks, musical instrument, etc.: The high-quality 230 volt 500 watt output with a pure sinus wave also supplies sensitive devices with power. In addition, this mobile power station is a silent and environmentally friendly alternative to power generators with combustion engines. In combination with a solar panel (available as an option), the built-in solar charge controller allows you to easily use the sunshine to directly charge your Power Station. The built-in Anderson input for direct charging via solar panel makes this particularly easy. Connection options Charge up to 4 x USB mobile devices such as smartphones, MP-3 players, mobile game paddles, cameras, drones, etc. at the same time. The device offers 1 x USB-A and 1 x USB-C fast charging output with Qualcomm Quick Charge 3.0 support. You can also power up to 5 x 12 volt devices with a total of 10 amps of current draw. Use 1 direct car cigarette lighter connector socket and 4 x DC 2.1/5.5mm connector sockets. With the 2 included adapters from 5.5/2.1mm hollow plug to cigarette lighter socket, you can connect car/camping devices such as refrigerators, water pumps, mini compressors, air pumps etc. directly and in parallel. In addition, 2 sockets with 230 volts and a total of 500 watts continuous power are available on the unit. Ideal for connecting chargers for notebooks/tablets/smartphones, mobile coolers and refrigerators, musical instruments, etc. or other electrical devices in this power class. The heart of the Power Station: the built-in battery The powerful 520Wh 43Ah/12Volt (140400mA/3.7V) lithium-ion battery reliably stores your energy reserve. It is charged within 8 hours with the included 230V charger or 12V car battery charging cable. Thanks to the built-in solar charge controller, you can also charge the Power Station directly using a solar panel (available as an option). A clear display shows you all relevant information such as the battery charge status, battery charging process, USB output ON/OFF and AC/DC output ON/OFF. Possible operating time with typical applicationsHow long does the Power Station charge or operate your devices? You can easily calculate the approximate operating time yourself: runtime (approx.) = Power Station 520 watt-hour battery x 0.85 / devices input power in watts.For example a notebook with 45 Watt input power: 520 Wh x 0.85 / 45 Watt = runtime in hours; 520 x 0.85 / 45 = 10 hours runtime.LED lamp with 5 Watt: approx. 88 hoursLED lamp with 10 Watt: approx. 44 hoursCamping cooler with 30 Watt: approx. 14 hoursNotebook with 45 Watt: approx. 10 hoursTV with 60 Watt: approx. 7 hoursSmartphone: 50 x chargingTablet computer: 30 x chargingDigital camera: 50 x chargingNotebook: 5 x charging Extensive electronic protection of all current inputs and outputs: The Power Station is protected against short circuit, overvoltage, over- and deep discharge of the battery and against overheating. Please note that for use with our astronomy mounts, such as the EXOS-2 Goto, the adapter cable 4930100 is additionally required. FEATURESPortable energy storage (Power Bank / Power Station)Self-sufficient power supply for outdoor, hobby and professional useCharging and operation of various electrical appliancesOperate or charge up to 11 devices at the same timePure sinus wave for both 230 volt outputsAlso suitable for sensitive devices such as notebooks or musical instrumentsMany connection options and adapters includedEnvironmentally friendly and silent alternative to power generatorsIntegrated solar charge controller for direct charging via solar panelComfortable carrying handle with non-slip rubber coatingPowerful 520Wh 43Ah/12 Volt (140400mA/3.7V) lithium ion battery3 x USB A with each 5-9 Volt 2.1 Ampere) and 1 x USB quick charge output with Qualcomm Quick Charge 3.0 support1 x USB C with 5-12 volts 3.0 amps (for smartphones and tablets of the latest generation)4 x 12 Volt DC out 5.5/2.1mm hollow plug (max. total load 10 Amps, short time 12 A)2 x 230 Volt AC out (500 Watt continuous power, short time 1000 Watt)Indication of battery charge status and USB/DC/AC output on/off staus on displayInput charging socket: 13-22 Volt / 6 Ampere (via power supply or solar panel)Built-in Anderson input for direct charging via solar panelCharging time 0-100% approx. 8 hoursTemperature range: from -10 to +40 degrees CelsiusLifetime/charging cycles: >500 times SCOPE OF DELIVERYPower Station with batteryCharger 230 Volt 6 amps230 Volt power cord for Europe (1 pc.)230 Volt power cord for UK (1 pc.)Car charger 12 VoltAdapter 5.5/2.1mm to cigarette lighter socket (2 pcs.)UK socket adapter for 230V output (2 pcs.)Instruction manual

SXP2WL SD115SII Complete Telescope Set with Wifi GoTo Mount, Tripod, and EyepiecesThis high-quality apochromatic refractor telescope-set impresses with its 115-mm-SD optics. The telescope is made in Japan and stands out with its excellent craftsmanship, sharpness, and contrast performance. The advantage of this SD refractor lies in its lightweight design and ability to produce color-pure and contrast-rich images. You'll be amazed when you observe the moon’s surface with its craters or Saturn with its ring system. On Jupiter, during a good night, you’ll even see the two bright cloud bands and many smaller details, such as the Great Red Spot on the planet. On moonless nights, you can observe the Andromeda Nebula, Orion Nebula, Eagle Nebula, Lagoon Nebula, and many more fascinating objects. Fainter celestial objects become visible thanks to this 115 mm wide aperture under a good sky.This telescope set "Made in Japan" leaves nothing to be desired. The FPL53 glass used in the telescope reproduces an extremely clear and sharp image by nearly eliminating any residual color errors. The SD glass is designed to bring all rays – violet, red, blue, yellow, and green – to the same plane. This special lens material reduces chromatic aberration across all colors. The new Vixen SD115SII has no spacers, which significantly improves image quality, especially for bright stars. In photographic images, no spikes are visible on the stars, which were previously caused by spacers.In combination with the optional SD Reducer HD Kit or SD Flattener HD (not included), this refractor telescope provides an image circle of 44 mm for full-frame DSLR cameras. The older ED81SII, ED103S, and ED115S refractors were originally developed for visual observers and photographers using APS-C cameras. However, the new SD series, with the use of new internal baffles, has been optimized for full-frame cameras. The large 60-mm focuser also allows for the attachment of heavy cameras without tilting. Additionally, the included flip mirror enables comfortable observation even in awkward situations and offers a T2 thread for attaching a DSLR camera. You can observe straight through or at a 90° angle. The carrying handle attached to the tube rings ensures a secure grip when transporting the telescope. The sturdy metal tripod ensures vibration-free mounting of the telescope and mount even in windy conditions. The SXP2WL mount is easily operated via a WiFi module with a smartphone or tablet. The free STAR BOOK Wireless app provides user-friendly mount control. With this app, you can use convenient celestial navigation functions such as automatic GoTo slewing to specific celestial objects easily through your smartphone or tablet. Since the conventional LCD screen (STAR BOOK TEN) is no longer required, the power consumption of the mount is reduced by up to 20%. This allows for longer periods of astronomical observation and astrophotography.Select the desired celestial object from a list, and it will be automatically slewed into the telescope’s field of view, and tracking begins. An existing STAR BOOK TEN controller can also be used with this mount without any issues. Equipped with the same precision stepper motors as the top model, the AXD mount, the SXP2WL sets a new standard of performance and precision in the Vixen mount family.The cross-axis of the SXP2 mount has a photographic payload capacity of 17 kg and weighs only 13.3 kg, making it ideal for mobile observations. Additionally, the motors in the lower part of the mount also act as counterweights, reducing the need for additional weights. The SXP2 mount features larger ball bearings than previous models to enhance accuracy and load capacity. The mount housing is also characterized by greater material thickness. To make the polar block even more stable, the cross-axis is securely clamped into a fork mount. The SXP2 Mount in Detail Stronger Mount BodyThe SXP2 mount is equipped with larger bearings than previous models to increase accuracy and load capacity. Additionally, the mount body is characterized by a thicker material. To further stabilize the polar block, the cross-axis is securely clamped into a fork mount. Very Precise Tracking with P-PEC FunctionThe SXP2 mount comes with the modern STAR BOOK TEN controller. It offers the P-PEC function for particularly precise tracking. "PEC" stands for "Periodic Error Correction". The system corrects mechanical errors caused by periodic gear errors. The P-PEC function available for the SXP2 equatorial mount is an enhancement of the PEC function. The P-PEC function stores your correction data even after the mount has been powered off. This means you do not need to re-enter the data every time, allowing for faster operation and more precise tracking. Low-Noise Belt Drive System with Minimal BacklashIn conventional motor drive systems for equatorial mounts, gears are driven by the motor. However, this design has the disadvantage of creating some backlash between the gears. To avoid the resulting inaccuracies, the SXP2 mount features a belt drive system. This significantly reduces both gear backlash and drive noise. In addition, the mount responds faster when corrections are needed. 16 BearingsThe mechanical parts of the SXP2 mount contain a total of 16 bearings. The RA axis is equipped with a set of tapered roller bearings to provide more stability for precise tracking. Stable Altitude Adjustment Block for AlignmentThe SXP2 mount uses the same fork as the heavier AXJ mount. This new design allows for quick and stable altitude adjustments. Easy and Precise Polar Alignment Using Reference StarsThe 6x20 polar finder is pre-installed. This allows for polar alignment in both the Northern and Southern Hemispheres. The polar finder features a variable illuminated reticle with an automatic shut-off function. The brightness can be adjusted in 8 levels to suit your individual needs. Additionally, the polar finder is equipped with a direct alignment system using three reference stars and can achieve accuracy up to 3 arc minutes. Variable Mounting HeadThe mounting head has a diameter of 35 mm and eight threaded holes for M8 screws, arranged 45 degrees apart. An optional accessory plate can be attached directly or in combination with an optional mounting block for dovetail plates. The threaded holes in the mounting head also allow the use of rails from other manufacturers. Combination of Innovative, Elegant Design and User-Friendly Operation The stable, rigid mount body with very precise tracking has been further optimized by the P-PEC function. This makes the SXP2 a highly precise and easy-to-use mount, sure to delight any astrophotographer or observer. Special Motor Positioning for Fewer CounterweightsThe heavy RA and DEC motor units are located in the lower part of the declination axis, placing the center of gravity of the cross-axis below the RA and DEC axis. This allows the declination body to act as a counterweight. The flat mounting head also enables the mount to be balanced with significantly fewer counterweights. Retractable Counterweight BarThe counterweight bar is made of solid stainless steel and has a diameter of 20 mm. It is compatible with all counterweights from the SX and GP mount series. The counterweight bar is housed in the declination body. Accessory Shoe The #35511 Polar Meter can be easily and quickly attached to this shoe for polar alignment. Latitude Adjustment The latitude can be adjusted between 0 and 70 degrees (divided into 3 zones and adjustable +/- 15 degrees per zone, for high, mid, and low latitudes).The Vixen Wifi Adapter in Detail The Vixen Wifi Adapter for EQ mounts allows you to control your Vixen mount via a smartphone or tablet. This enables you to use the STAR BOOK Wireless smartphone app (free) for celestial navigation without cabling. The app quickly turns your mobile device into a controller for the equatorial mount. The mount’s response delay, often considered the biggest drawback of wireless connections, has been reduced to a level comparable to wired solutions. Reduced Power Consumption Compared to Traditional Controllers with LCD Monitor The power consumption of the mount is reduced by up to 20%, enabling longer observation sessions compared to traditional wired controllers like the STAR BOOK TEN. Operation Similar to the STAR BOOK TEN Controller The STAR BOOK Wireless App is similarly structured to the STAR BOOK TEN controller. Depending on the star chart settings, it contains up to 259,000 celestial objects. Simply tap on an object in the list and start the GoTo. The mount will automatically move to the target and bring it into the telescope’s field of view. All the popular features of the STAR BOOK TEN remain available. Comfortable Operation While looking through the telescope, you can operate the mount by swiping on the app’s star chart. Since there are no buttons, you simply glide your finger over the star chart to easily control the mount. Extensive Astronomical Data Included This includes data on well-observed celestial bodies such as Messier objects, NGC objects, IC objects, as well as the sun, moon, planets, comets, and dwarf planets. High-Precision Alignment By aligning with one or two stars, you can achieve fairly accurate mount positioning. By aligning with three or more stars, a highly precise alignment for high magnifications can be achieved. Objects are then targeted precisely and centered in your telescope’s field of view. Alignment data is saved and can be retained even when the device is powered off. By leaving the telescope in its current state after an observation without moving it, you can start the automatic installation with the same settings during the next observation. Customizable Settings Like the STAR BOOK TEN controller, the app offers various individual settings such as gear backlash compensation, red night mode, autoguider, variable GoTo speed, and LED brightness. You can also set the timing of the optical tube flip (meridian flip) as desired. Even if the object moves south during tracking, you can prevent the telescope tube from flipping. Important Information Not compatible with older SX mounts using the old blue Star Book. Technical Information on the Wifi Module 32-bit CISC processor CPU 120 MHz The unit is connected to the mount via a D-SUB 9PIN connector, as with the STAR BOOK TEN. It features a 6-pin 6-core modular plug for external autoguider operation. Supported operating systems are Android 6 or higher, iOS 9.0 or higher, WiFi standard: IEEE 802.11b/g/n.FEATURESRA worm wheel: 73.2 mm Ø, brass wheel with 180 teethDEC worm wheel: 73.2 mm Ø, brass wheel with 180 teethWorm shaft: 9 mm Ø, brassRA & DEC axis: 40 mm Ø, carbon steel bearings, 16 bearingsCounterweight shaft: 20 mm Ø RAPolar finder scope: PF-LII 6x20 mmStepper motors: 250 PPS speed, maximum 1000x sidereal rateMaximum payload: 17 kg for photography without counterweightPower supply: DC12 V 0.45~2.2 ADimensions: 386 x 419 x 128 mmWeight of axis cross: 13.3 kg without counterweightCounterweights: 3.7 kg, 1.9 kgObjective lens: D=115 mm, multi-coated2-lens SD apochromat without spacersNo spikes visible on starsFocal length: 890 mm (f7.7)Resolution and limiting magnitude: 1.01 arc seconds; 12.1Light gathering power: approx. 270x more than the human eyeDimensions and weight: 125 mm dia x 930 mm; 4.4 kg without accessoriesFinder scope: 7x50 illuminatedAdapter and connections: 60 mm thread, 50.8 mm and 31.7 mm sleeve, T-ring threadConnection: 50.8 mm and 31.7 mm sleeve with flip mirrorPhotography: Prime focus and eyepiece projectionSCOPE OF DELIVERYSXP2WL mountSD115S II apochromat7x50 finder, illuminated with 1.25-inch eyepiece holderSXG HAL130 tripodSXG half-pillarWifi module2 counterweights: 1.9 kg and 3.7 kg9-pin D-sub cableMounting toolPolar finder PFL-IICigarette lighter cable

With the BRESSER car adapter cable 12V (7.5m) telescope mounts such as the LXD-75 or EXOS-2 Goto and many more can be powered by the cigarette lighter of your car.FEATURESCar adapter cable for telescope mounts12VCable length: 7.5 metersPower plug 2,5/5,5mm (inner/outer diameter) SCOPE OF DELIVERYcar adapter cable

Suitable for SD-1/DD-1/DD-2/DD-3/Skysensor control units. Specifications • Capacitiy: 8x mono blocks / rechargeables • Dimensions: 140x140x80 mm • Weight: 0.129 kg (w/ batteries)

SXP2WL mount with AX103S apochromatic high-performance refractor in a complete setWith this complete telescope set, you can immediately start your hobby. It includes everything you need for astronomical observation: a powerful AX103S apochromat, the corresponding mount with automatic GoTo tracking, 2 SLV 20 and SLV 5 eyepieces, and a sturdy tripod. The SXP2WL mount is equipped with the PFL-II polar finder for quick and easy alignment using reference stars, as well as a WiFi adapter with the STARBOOK APP. This allows the telescope to automatically navigate to the objects you select. The AX103S apochromat has been optimized for astrophotography and provides a sharp image even to the corners of a full-frame DSLR camera. But the telescope is also ideal for visual observation, offering high-contrast images without chromatic aberrations. The AX103S Apochromat in DetailThe AX103S is a top-class ED apochromat from the Vixen Refractor series. The telescope is equipped with a Triplet SD lens, and there is a field flattener lens located at the rear. Additionally, the f/8.0 refractor includes a central ED lens in the objective, which reduces chromatic aberration to an absolute minimum.An optional Focal Reducer (not included) can reduce the aperture ratio to 1:5.6, allowing for faster results in astrophotography. The integrated field flattener ensures a sharp image all the way to the edge of the field of view – an essential requirement for high-quality images of celestial bodies.With the 60 mm ring on the focuser, you can use 2'' eyepieces with the telescope or attach a camera adapter.The AX103S has been specifically designed for photographic applications and corrected for full-frame photography. However, it is also a visual delight, particularly for observing the moon and planets.This excellent telescope is guaranteed to impress you for a lifetime! The SXP2WL Mount in Detail Stronger Mount HousingThe SXP2WL mount features larger bearings than previous models to increase accuracy and load capacity. Additionally, the mount housing is made of thicker material. To make the polar block even more stable, the axis cross is clamped firmly into a fork. Very Precise Tracking with P-PEC FunctionThe SXP2WL mount is supplied with the modern STAR BOOK TEN controller. It offers a P-PEC function for highly precise tracking. The term 'PEC' stands for Periodic Error Correction. This system corrects errors in the mechanics, caused by periodic inaccuracies in the gear system.The P-PEC function saves your correction data even after the power is switched off, so you don't need to re-enter the data each time, allowing for faster operation and more precise tracking. Low-Noise Belt Drive System with Minimal BacklashIn conventional motor drive systems for equatorial mounts, gears are used to transmit power from the motor. However, this design can introduce a certain amount of backlash between the gears.To avoid the inaccuracies caused by this, the SXP2WL mount features a belt drive system, which significantly reduces both backlash and drive noise. Additionally, the system responds faster to any necessary corrections. 16 BearingsThe mechanical parts of the SXP2WL mount include a total of 16 bearings. The RA axis uses a set of tapered roller bearings to achieve more stability for more precise tracking. Stable Polar Altitude Block for AlignmentThe SXP2WL mount uses the same fork as the heavier AXJ mount. This new design allows for quick and stable latitude adjustment. Easy and Accurate Polar Alignment Using Reference StarsThe 6x20 polar finder scope is pre-installed. This allows you to set up the polar alignment (for both the northern and southern hemispheres). The polar finder offers a variable illuminated reticle with an automatic shut-off feature. Brightness is adjustable in 8 levels, so you can tailor it to your individual needs. The polar finder is also equipped with a direct setting using three reference stars and can achieve an accuracy of up to 3 arcminutes. Variable Mount HeadThe mount head has a diameter of 35 mm and eight threaded holes for M8 screws, arranged at 45-degree intervals. An optional accessory plate can be attached directly or in combination with an optional dovetail mounting block. In addition, the threaded holes on the mount head allow the use of mounting rails from other manufacturers. Combination of Innovative, Elegant Design and User-Friendly OperationThe stable, rigid mount body with very precise tracking has been further optimized by the P-PEC function. The SXP2WL is a highly precise and easy-to-use mount that is sure to excite any astrophotographer or observer. Special Motor Mounting for Fewer CounterweightsThe heavy RA and DEC motor units are mounted in the lower part of the declination axis, so the centre of gravity of the axis cross is below the RA and DEC axis. This means the declination body acts as a counterweight. The flat mounting head also allows the mount to be balanced with significantly fewer counterweights. Retractable Counterweight BarThe counterweight bar is made of solid stainless steel and has a diameter of 20 mm. It allows you to use all the counterweights of the SX and GP mount series. The counterweight bar is housed in the declination body. Accessory ShoeFor easy and quick polar alignment, the #35511 polar meter can be slid onto this shoe.Latitude AdjustmentThe latitude can be adjusted between 0 and 70 degrees (divided into 3 zones and adjustable +/- 15 degrees per zone for high, medium, and low latitudes). The Vixen WiFi Adapter in Detail The Vixen WiFi Adapter for EQ mounts enables you to control your Vixen mount via a smartphone or tablet. Using the free STAR BOOK Wireless smartphone app, you can navigate the skies without any cables. The app instantly transforms your mobile device into a controller for the equatorial mount. The response delay of the mount, which is often the main drawback of wireless connections, has been minimized to a level comparable to wired solutions. Reduced Power Consumption Compared to Conventional LCD ControllersThe power consumption of the mount is reduced by up to 20%, enabling longer observation periods compared to traditional wired controllers like the STAR BOOK TEN. Similar Operation to the STAR BOOK TEN ControllerThe STAR BOOK Wireless app is designed similarly to the STAR BOOK TEN controller, offering up to 259,000 celestial objects, depending on the star chart settings. Simply tap a celestial object in the object list and initiate GoTo slewing. The mount will automatically move to the selected target and bring it into the telescope's field of view. All the beloved features of the STAR BOOK TEN remain available. Comfortable OperationWhen looking through the telescope, you can operate the mount by swiping on the star chart in the app. With no buttons, you simply slide your finger across the star chart, making the mount easy to control. Extensive Astronomical Data IncludedIn addition to data on well-observed celestial objects like Messier objects, NGC objects, IC objects, the sun, moon, planets, comets, and dwarf planets, the app also includes data for other objects. High-Precision AlignmentAligning the mount with one or two stars will give you fairly accurate positioning. With three or more stars, you can achieve highly precise alignment for high magnifications. The objects will then be centered in the telescope’s field of view. Alignment information is saved and retained even when the device is powered off. If you leave the telescope in its current state after completing an observation, you can start the automatic installation with the same settings the next time. Customizable SettingsThe app offers similar customization options to the STAR BOOK TEN controller, including backlash compensation, night mode in red, autoguider support, variable GoTo speed, and LED brightness adjustment. You can also configure when the telescope tube will flip (meridian flip). Even when the object is moving south during tracking, you can prevent the telescope tube from flipping. Important InformationNot compatible with older SX mounts using the blue STAR BOOK. Technical Information on the WiFi Module32-bit CISC processor with 120 MHz CPUConnected via a D-SUB 9-pin connector like the STAR BOOK TEN to the mount.Includes a 6-pin modular connector for external autoguider operation.Supported operating systems: Android 6 or later, iOS 9.0 or later, WiFi standard: IEEE 802.11b/g/n. FEATURES SXP2 MOUNT RA gear: 73.2 mm Ø, brass gear with 180 teeth DEC gear: 73.2 mm Ø, brass gear with 180 teeth Worm gear: 9 mm Ø, brass RA & DEC axis: 40 mm Ø, carbon steel bearing, 16 bearings Counterweight bar: 20 mm Ø RA Polar finder scope: PF-LII 6x20 mm Stepper motors: 250 PPS speed, maximum 1000x sidereal rate Maximum load: 17 kg photographic without counterweight Power supply: DC 12 V, 0.45~2.2 A Dimensions: 386 x 419 x 128 mm Weight of axis cross: 13.3 kg without counterweight Counterweights: 3.7 kg, 1.9 kg FEATURES AX103S APOCROMAT Optimized for full-frame photography 103 mm aperture, 825 mm focal length, f8.0 Resolution capability: 1.13 Visual limiting magnitude: 11.8 Fully multi-coated triplet ED lens with flattener Very high sharpness and contrast Optional reducer available Backfocus without reducer: 150.0 mm Backfocus with reducer: 63.5 mm SCOPE OF DELIVERY AX103S apochromatic refractor Tube rings and carrying handle Vixen prism rail Illuminated 7x50 finder scope with 1.25-inch sleeve Flip mirror 2 SLV eyepieces, 20mm, 5mm SXP2WL mount Wireless unit Counterweights: 1.9 kg, 3.7 kg PFL-l2 illuminated polar finder with direct search Mounting tools Cigarette lighter cable Sturdy SXG-HAL 130 aluminium tripod