Skip to main content Skip to search Skip to main navigation

Vixen Dew Cap Heating

With BRESSER, you can enjoy a smooth introduction to the vast world of astronomy. Our detailed information ("Telescope Guide") provides valuable tips for beginners—but even experienced astronomers can use the information we provide (e.g., tables for the geographical latitude of all major world cities) as a reference.

Here is the table of contents of the comprehensive BRESSER Telescope Guide:

Sky Guides by Bresser

The Sky Guide provides comprehensive information on constellations, planetary positions, and astronomical events – perfect for planning your observations and delving deeper into astronomy.
Visit the guide directly here to make the most of your observations!

Product and safety instructions


Manufacturer: 
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede

Contact: 
www.bresser.de


Warning notes
  • General safety instructions DANGER Risk of suffocation! Improper use of this product can result in suffocation, especially for children. Therefore, carefully observe the following safety instructions. Keep packaging materials (plastic bags, rubber bands, etc.) away from children! There is a risk of suffocation! Keep cords, ribbons, and similar materials away from children! They could accidentally strangle themselves and suffocate! NOTE Risk of material damage! Improper handling can damage the device and/or accessories. Therefore, only use the device according to the following safety instructions. Do not dismantle the device! In the case of a defect, contact your dealer. They will contact the service center and may send the device in for repair.
  • Never look at the sun through an eyepiece/telescope without a certified protection filter. A moon filter can never be used for solar observation. The moon filter is only suitable for moon observation. The solar filter must be mounted in front of the telescope opening, not at the eyepiece. Otherwise, the concentrated light beam through the optics will immediately destroy the filter foil, leading to severe eye damage, including permanent blindness.
  • Never leave the optics unattended. Children and inexperienced adults could point the telescope at the sun without proper precautions and lose their eyesight.
  • Do not expose the device to high temperatures.
Skip product gallery

Customers also bought

Vixen VC200L Optical tube
Astrophotographers generally use two different focal lengths: Short focal lengths for overview photos and extensive deep-sky objects, and long focal lengths for objects which are further away. Our aspherical mirror optics offer the perfect solution for these scenarios. The VISAC primary mirror (Vixen Sixth-Order Aspheric Cassegrain) is specially designed for astrophotography and provides a fully flat and true-colour image over the entire image frame. Thanks to the three-element field corrector in front of the convex secondary mirror, there is no spherical aberration, coma or field curvature. Although the device is designed for astrophotography, it is also suitable for visual observations. FEATURES Photographically optimized thanks to field flattener lens Revolutionary coating technology High light-gathering power Photographically optimised optical system Built-in field flattener lens 200 mm aperture and 1800 mm focal length Optional reducer availableBackfocus without Reducer: 142,9 mmBackfocus with Reducer: 63,5 mmWeight: 6.9 kg DELIVERY CONTENT VC200 reflector telescope Carry handle 7x50 finder scope (illuminated) Flip mirror Dovetail adapter

Available

€2,299.00*
Vixen Dew Cap for 200mm Aperture Telescopes
The Vixen dew cap is designed specifically for Vixen's 200 mm aperture optics. It fits the R200ss, VC200L, VMC200L and many other telescopes with a similar diameter. The dew cap prevents fogging of your optics due to humidity and additionally protects the telescope from stray light. The 1 mm thick polyethylene material is very flexible, light and adaptable.FEATURES Protects against dew Protects against stray light Made of flexible polyethylene material Dimensions: 22x77cm Material thickness: 1 mm Weight: 104 g SCOPE OF DELIEVERYDew Cap for 200mm Aperture Telescopes

Currently not available

€59.00*
Vixen Cable adaptor
12 V replacement adapter cable for power adapter #3599Compatible with SX, AXJ and AXD2 mounts.This cable is included with the power adapterFEATURESConverts to inside + polarityCompatible with SX, AXJ and AXD2 mounts.DELIVERY CONTENTVixen cable adapter

Available

€18.00*
Vixen DC ring 60 mm to T2 camera thread
This DC ring can be used to fit a 60-mm thread to a 42-mm T2 thread. It is suitable for use with T-mount adapter rings for cameras or with the Vixen T2 42–31.7 mm reducing sleeve (item no.: X002294). This means it can be used to mount DSLR cameras on the Vixen R200SS and other telescopes with 60-mm focuser.FEATURESFor fitting T-mount adapter rings for the camera Adapts to 31.7 mm when connected to the Vixen eyepiece adapter (item no.: X002294)Weight: 26 g PACKAGE CONTENTSDC ring 60 mm

Available

€49.00*
BRESSER Adapter 2" on T2
Enables you to connect a camera to telescopes that accept 2" barrel eyepieces. You will need a T2-ring for your special camera type also. The very special feature of this adaptor is the very short mechanical design (2.0mm) which enables the camera use also on telescopes with a short focal range. This adapter is also prepared to use with 2" filters.   

Available

€17.90*
Skip product gallery

Customers also viewed

Vixen Lens Heater 360 IV
The 360 IV Lens Heater is designed to prevent camera lenses and telescopes from fogging up due to dew. It is also well suited for eyepieces.The heating element is a carbon fiber heater with a high thermal efficiency. The textile heating element provides great flexibility compared to other heating materials. The power cord (USB cable) has a particularly high flexibility to be still elastic at low temperatures. A very flexible Velcro tape allows for quick and easy attachment to and removal from the lens. The tape can be easily removed from the lens without pulling tightly. The heating tape has a very low power consumption and can be operated with a 10,000 mA battery for up to 14 hours.The Vixen Lens Heater 360 IV in detailWhen moisture in the air comes into contact with an object whose temperature is lower than the ambient temperature, small drops of water form - so-called dew condensation. Astrophotography often suffers from such lens fogging and the photo turns milky. Because the temperature and humidity change during the night and the camera becomes cooler than the ambient temperature, it is important to warm the objective's or telescope's lens by using heaters to prevent it from fogging. We recommend using the Lens Heater 360 IV when you want to do astrophotography or night photography on the coast, in the mountains or in cold regions. The heating elements are made of carbon fibers with improved heating performance, introduced for the fourth generation Vixen Lens Heater 360 IV. They efficiently keep the lens warm and fog-free with minimal power consumption. The heater temperature reaches 10 degrees Celsius above the ambient temperature (at 20 °C outside temperature and no wind). However, it varies according to influences in the environment. For power supply the lens heater is equipped with a detachable coiled cable (USB Type-C), up to 50 cm long. The 360 IV lens heater consumes only 2.5 W of power (5 V - 0.5 A). With a portable USB battery of e.g. 10,000 mA, it can operate continuously for about 14 hours (at 20 °C outdoor temperature). However, the operating time varies greatly depending on the environment and temperature. The soft and non-slip surface of the heating tape allows for easy attachment to the objective, eyepiece or telescope. The heater consists of a 30 mm wide and 600 mm long heating tape and is suitable for diameters up to 100 mm.FEATURESHeating type: carbon fiber textile heatingTemperature: 10 degrees Celsius above ambient outdoor temperature (at 20° C, no wind)Power source, power consumption: USB, 5 V, 0.5 A, 2.5 WPower cable: USB A (male)Connector: USB type C connector detachable coiled cable 20 to 50 cmOperating time: approximately 14 hours with fully charged 10,000 mAh battery (at 20 °C outdoor temperature)Recommended for lenses with a width of 30 mm and an outer diameter of 45 to 100 mmDimensions: 30 x 600 mmTotal weight: 67 gSCOPE OF DELIVERYLens Heater 360 IVUSB spiral cable

Available

€89.00*
Vixen A80Mf optical Tube
The A80Mf refractor is an ideal entry-level model for beginner astronomers who value high-quality optics. Thanks to Vixen’s quality controls, the 80 mm lenses are produced to an outstanding quality. The refractor comes with two Plössl eyepieces (6.3 mm and 20 mm) and a 90° star diagonal. The A80Mf is ideal for exploring the moon and the brighter planets. On moonless nights you can observe the Andromeda Galaxy or Orion’s Nebula. The 6x24 viewfinder makes locating celestial objects quick and easy. We recommend using this product with the optional Porta II mount. The mount is lightweight, stable and easy to use. FEATURESObjective lenses: 80 mm achromat, coatedFocal length: 910 mm (f11.4)Resolution and limiting magnitude: 1.45 arc seconds; 11.3Light-gathering power: 131xDimensions and weight: (OD) 90 mm x (L) 860 mm; 3.3kgDew shield diameter: 100 mmViewfinder telescope: 6x24 mmAdapter and connections: 42 mm for T-thread; 31.7 mm connectionIncluded accessories: 31.7 mm star diagonal, PL20mm & PL6.3mm eyepiecesPhotography: Primary focus and eyepiece projection WHAT’S INCLUDED 31.7 mm star diagonal PL20mm & PL6.3mm eyepieces Tube clamps Dovetail adapter 6x24 mm viewfinder telescope

Available

€249.00*
EXPLORE SCIENTIFIC T2 Reduction Adapter M48x0.75 to M42x0.75
For connecting T2 camera accessories with the smaller M42x0.75 thread to the larger M48x0.75 thread. Also ideal for adapting 2 inch colour and nebula filters between camera and telescope. FEATURES Connection of accessories with different T2 thread sizes Adaptation of 2 inch color and nebula filters between camera and telescope Internal thread M48x0.75 mm (large T2 thread) External thread M42x0.75 mm (small T2 thread) Free inner diameter of 39.0 mm Outer diameter is 50.65 mm (2 inches) Black matt anodized aluminium Weight is only 10 grams SCOPE OF DELIVERY Reduction adapter (1 piece)

Available

€20.00*
BRESSER Polar Finder Scope for StarTracker PM-100
Optical polar finder for fast and precise polar alignment of the BRESSER StarTracker Astrophoto Mount PM-100 art.no. 4964120. The BRESSER polar finder scope allows a very precise alignment to the celestial pole by using the illuminated crosshair and constellation markings. Simply adjust the StarTracker astrophoto mount using the tilt head or ball head in the pole height and azimuth until the constellation markings in the polar finder match the constellations in the sky - done. Ideal for optimizing tracking accuracy in astrophotography. FEATURES Optical pole finder scope with illumination To optimize the polar alignment Suitable for StarTracker Astrophoto Mount PM-100Illuminated crosshairs and constellation markings Field of view 6,5° degreesQuick and easy to use SCOPE OF DELIVERYPolar finder scopeMounting material Instruction manual  

Available

€79.00*
BRESSER Messier AR-127L/1200 EXOS-2/EQ5 Telescope
NEW - now including a high-quality aperture Solar-filter for safe observation of sunspots, eclipses and planet transits. Great telescope for night and solar observation. For the price-sensitive planetary observer the AR-127L is a dream machine. View tiny dots and structures in the cloud bands of Jupiter, small rims and craters on the surface of the moon and details on Mars, including the ice-covered polar regions of our neighbouring planet. Watch Jupiter's moons dance around the planet and detect the greenish glow of Uranus far beyond Saturns orbit. The combination of large aperture and long focal length provides tack-sharp high-contrast pictures that will impress you every time anew.  CHARACTERISTICS OPTIC Optical design: refractor telescopeLens diameter: 127 mm / focal length: 1200 mm / F/9.4Maximum recommended magnification: 354x High-quality and light gathering achromatic objective lens Modern multi-coating of the lenses for a bright and high-contrast image Robust aluminium tube construction Very high quality Hexafoc focuser with 2.5" free inner diameter 8x50 viewfinder with crosshair eyepiece; optimised finder mount for comfortable viewing 31.7mm (1.25") zenith mirror Hand grip for comfortable transport with integrated camera holder (photo thread screw) Prism rail with stainless steel clamping surface (44mm universal dovetail for GP/EQ5/LXD75) 50.8 to 31.7mm adapter with integrated T2 adapter (optional T2 ring required) Smartphone adapter for celestial navigation included Telescope for night and solar observing CHARACTERISTICS MOUNT Stable parallactic mount with fine drive in both axes Ball bearings in both axes for more precise movements Stable height adjustable stainless steel tripod ( Min. 69cm / Max. 109,5cm ) Load capacity up to 13 kg payload Retrofittable with the Bresser Star Tracker Goto Kit ( item no. 4951750 ) Circular bubble for easy horizontal alignment Pole height scale for setting the latitude Scaled graduated circular rings to facilitate finding objects using a star atlas or planetarium software Pole finder scope with optional illumination ( item no. 4964212 ) Tripod weight: 4.7 kg Mount weight: 5.6 kg (without counterweight) Total weight incl. counterweight: 14.8 kg Batteries: not included Scope of delivery optical tube 26mm Super Plössl eyepiece (31.7mm / 1.25") 31.7mm (1.25") zenith mirror integrated 31.7 mm and T2 adapter Prism rail with stainless steel clamping surface (44mm universal dovetail for GP/EQ5/LXD75) 8x50 viewfinder Rotatable star chart Lens solar filter Tube clamps with carrying handle and camera mount Smartphone adapter for celestial navigation Astronomy PC software Stellarium (via download) Bresser EXOS-2 mount 1 x 4.5 kg counterweight Stainless steel tube field tripod with accessory tray

Available

€896.00*
Vixen polar meter QPL Compass for Polar Star Alignment
This accessory includes a compass with a spirit level and a height scale. The compass helps you to quickly locate the polar star when it is hidden behind trees or a mountain. The compass attaches to the accessory shoe on the Polarie Star Tracker or a device with a camera accessory shoe. FEATURES Compass Oil-filled compass Azimuth dimensions: 1° steps Height adjustment: 5° steps (max. +/- 70°) Markings: marked with luminous paint Spirit level: Built-in spirit level DELIVERY CONTENTS QPL compass

Available

€49.00*
EXPLORE SCIENTIFIC ES 8x50 Illuminated Finder Scope
Explore Scientific 8x50 illuminated finder scopes (available in straight-thru and right angle versions) produce images that are right-side-up and left-to-right corrected views, which makes it easier to find objects in the sky. The Explore 8 X 50 Straight-Thru Erect Image Illuminated Finder Scope, with its scale markings and open Center, not only helps you center objects precisely, but gives a reference of the exact field of view in Degrees. The deep red Illumination can be adjusted to just the right brightness. The eyepiece has comfortable eye relief and produces a 6,97 degrees field of view. Both the eyepiece and the main objective can be focused independently so that you can obtain perfect focus for your eyes. The straight-thru finderscope weights just under a pound (450gr), and measures 216mm" x 63mm" x 58mm". FEATURES High quality 8x50 upright viewfinder With adjustable crosshair lighting with scale markings Perfect image sharpness and good viewing behaviour Large field of view FOV of 6.96 degrees Focusing of lens and crosshair separately possible.  Multi-coated lens surfaces. Power supply by 2 pcs coin battery type LR41.FEATURESHigh quality 8x50 upright viewfinderWith adjustable crosshair illumination and with scale markingsPerfect image sharpness and good viewing behaviourLarge field of view FOV of 6.96 degreesFocusing of lens and crosshair separately possibleMulti-coated lens surfacesSCOPE OF DELIVERYFinder scopeFinder bracket

Available

€139.00*