Vixen Dovetail Slide Bar DD for POLARIE Star Tracker Astrophotography Mount

The counterweight rod is attached to the dovetail rail using a 1/4 inch photo screw. It is compatible with the Vixen counterweights 1.0 kg, 1.9 kg, 2.8 kg and 3.7 kg and is used to balance the AP Photoguiders, the Polarie or the Polarie U Star Tracker. PROPERTIES Shank diameter: 20mm Size: diameter 23x135mm Effective length of the counterweight rod: 130mm Weight: 330g WHAT'S INCLUDED Counterweight rod Locking screw

The Vixen POLARIE Multi Mounting Block was developed to fit Vixen profile dovetail rails, such as the Vixen Dovetail Slide Bar DD, to the Polarie Star Tracker. In this way you can increase the load capacity of the tracker up to 6.5 kg! By releasing the clamping lever on the multiple assembly block, you can move the dovetail freely and clamp it again, making balancing of your camera or telescope rig an easy task. The hole in the middle of the multiple mounting block enables the photographer to carry out the polar alignment without removing the POLARIE polar finder PFL with the dovetail rail DD or the dovetail rail PG. Using one of these combinations, you can easily put deep sky photography into practice with a telephoto lens, or compact telescope. PROPERTIES Allows the inclusion of dovetail rails The Star Tracker can hold up to 6.5 kg in weight Allows the use of telephoto lenses Polar alignment possible without removing the polar finder Weight: 440g WHAT'S INCLUDED POLARIE multiple assembly block Assembly tool

Attachment plates, such as the ARCA SWISS are compatible with this quick-release panorama plate. (Note: angle plate is not included in # 35527). The base of the Vixen Quick Release Panorama Clamp can be rotated 360 degrees so that the position of the mounted camera system can be adjusted simply by loosening the clamping lever. In addition to the recommended Vixen dovetail bar DD and top plate, the camera mount is also compatible with other devices with 1/4 ", 3/8" inch screws. The recommended accessory is the X000096 Angle L Bracket for portrait and landscape photography. PROPERTIES Can be rotated 360 degrees ARCA SWISS compatible Weight: 320g WHAT'S INCLUDED Quick-release panorama plate Screws and tools

You need this Vixen polar finder set for the POLARIE U Star Tracker in order to be able to align the POLARIE U exactly to the celestial pole. This is very important for longer focal lengths and exposure times, in order to obtain point-like star images. The polar finder enables polar alignment with an accuracy of 3 arc minutes . The polar alignment is very simple: You only have to bring the Pole Star and two other stars into the field of view of the polar finder and rotate them with the stars so that they are congruent with the reticule shown in the polar finder.  No further calculation is needed - no time and date to set, just match the reticule to the polar stars and get imaging. The polar finder PF-L II has red, dimmable lighting that switches itself off after a few minutes in order to save the batteries.PROPERTIES5 x 20 viewfinder with 10 ° field of view3 star positioningNorthern skies: Polaris, Delta UMI, 51 CepSouthern skies: Chi Octantis, Tau Octantis, Sigma OctantisDimmable, red lighting in 8 levelsWHAT'S INCLUDEDPole finder PF-L IIMounting armCR 2032 battery

The PS adapter by Smartclip is specially made for your Pulsar FN455 device. The made-to-measure design enables you to optimally mount your attachment on your target optics. This adapter is made from one piece to provide additional stability. In addition, the side-closing clip fastener keeps slippage of the adapter on the optics to a minimum. Advantages of the Smartclip adapterMade from ultra-strong aluminium from the aviation industryHard anodizedBuilt-in ''silence band'' ensures minimal noise during attachment and removal Rounded inlet edges for easy attachmentSide lock ensures that open adapter is easily visible and noticeableFEATURESType: AdapterDesigned for: Pulsar FN 455Material: Metal (one piece)Required distance: min. 3 mmAvailable sizes: 48 mm, 56 mm, 57 mm, 58 mm, 59 mm, 60 mm, 62 mm, 63.5 mm, 64 mm, 65 mm (outer diameter of your optics)Weight: 111g

T2 rings are used as a connecting piece between the camera adapter and the camera. Please note that each camera type requires a different T-ring.FEATUREST2 adapter ring for Nikon camerasAdapts the camera to telescopes and microscopesWeight: 22 gPACKAGE CONTENTSVixen T2 ring for Nikon

Vixen has developed a new generation of SX mounts for demanding observers and astrophotographers. The SX2WL mount is simply operated via a Wifi module with a smartphone or tablet. By controlling the mount with your smartphone using the free STAR BOOK Wireless app, you can easily use sky navigation functions such as automatic GoTo panning of celestial objects via your smartphone or tablet. By eliminating the power consumption of the conventional LCD (STAR BOOK TEN), the power consumption on the mount is reduced by up to 20%, thus enabling longer astronomical observation and astrophotography. When the desired celestial object is selected from a list, it is automatically panned into the telescope's field of view and tracking begins.An existing STAR BOOK TEN controller can also be used on this mount without any problems. Equipped with the same precision stepper motors as the top model, the AXD mount, the SXD2WL brings a new standard of performance and precision to the Vixen mount family. With a photographic load capacity of 12 kg, the axis cross of the mount weighs just 7.0 kg (15.4 lbs) making it ideal for mobile observations.In addition, the motors mounted in the lower part of the mount also serve as a counterweight, so the mount requires fewer weights for balancing. The SX2 mount in detail Precision stepper motors and micro-step motion control systemAt the heart of the SXD2 are the precision stepper motors, which offer better performance and response than previous models. The micro-step motion control system offers powerful and yet very smooth drive characteristics, which are given both in fine movements and in fast pans. Built-in bearings The bearings of the RA and DEC axes and the worm shafts have been significantly improved to reduce the load on the motors. As a result, the motors move much more smoothly than in previous models. High-precision worm gearsHigh-precision processing technologies eliminate worm gear errors. The edges of the two worms and worm wheels are particularly smooth, enabling very precise tracking. Declination axis as counterweightThe solid motor units are installed in the lower part of the declination axis so that the center of gravity of the SXD2 is below the intersection point of the RA and DEC axes. This means you need fewer additional counterweights. Latitude setting The latitude is adjustable between 0 and 70 degrees (divided into 3 zones and adjustable +/- 15 degrees per zone, for high, medium and low latitudes); latitude scale in 2-degree increments; fine adjustment with a tangent screw head, approx. 0.8 degrees per turn. The wireless module in detail The Vixen Wifi adapter for EQ mounts allows you to control your Vixen mount via a smartphone or tablet. With the smartphone app STAR BOOK Wireless (free of charge) you can navigate the sky without any cables. The app turns your smartphone or tablet into a control unit for the equatorial mount in no time at all. The response delay of the mount, which is considered the biggest disadvantage of wireless connections, has been reduced to a level comparable to wired connections. Reduced power consumption compared to conventional controllers with LCD monitor The power consumption of the mount is reduced by up to 20%, allowing longer observations than with conventional wired controllers such as the STAR BOOK TEN. Operation similar to the STAR BOOK TEN controllerThe STAR BOOK Wireless app has a similar structure to the STAR BOOK TEN controller. Depending on the star map setting, it contains up to 259,000 celestial objects. Tap on a celestial object in the object list and start the GoTo. The mount will now automatically move to this target and bring it into the telescope's field of view. All the popular features of the STAR BOOK TEN are retained. Convenient operation When looking through the telescope operate the mount by swiping on the app's star chart. As there are no buttons, simply slide your finger over the star chart to operate the mount conveniently. Extensive astronomical data included In addition to data on easily observable celestial bodies such as Messier objects, NGC objects and IC objects, this also includes the sun, moon, planets, comets and dwarf planets. High-precision alignment By aligning the mount to one or two stars, you can already achieve fairly precise positioning. By aligning the mount to three or more stars, you can achieve high-precision alignment of the mount for high magnifications. The objects are then approached precisely and centrally in your telescope's field of view. The alignment information is saved and can be retained even when the device is switched off. By leaving the telescope in its current state after completing an observation without moving it, you can start the automatic installation with the same settings for the next observation.  Individual setting options As with the STAR BOOK TEN control unit, the app offers various individual settings, such as gear backlash compensation, night mode in red, autoguider and variable GoTo speed and LED brightness. You can also set the timing of the reversal of the objective tube (meridian flip) as desired. Even if the object moves to the south during tracking, you can prevent the telescope tube from reversing. Important note: Cannot be used on old SX mounts with the old blue Star Book! Technical information about the Wifi module: CPU with 32-bit CISC processor 120 MHz The unit is connected to the mount via a D-SUB 9PIN connector as with the STAR BOOK TEN. It has a 6-pin 6-wire modular plug for external autoguider operation. Supported operating systems are Android 6 or higher, iOS 9.0 or higher, WLAN standard: IEEE 802.11b/g/n. FEATURESRA sprocket: 180 teeth DEC sprocket: 180 teeth Shaft material and diameter: Carbon steel / Decl. 35 mm, RA 40 mm thickness  Fine height adjustment: 0° to 70°, (fine adjustment +/- 15°, height) Backsight rod: 20 mm diameter Azimuth adjustment: worm fine adjustment Power supply: DC12 V; 0.4~1.7 A Maximum load: 12 kg, photographic, without counterweight Counterweight: 1x 1.9 kg  Tripod connection: 45 mm spigot Dimensions: 36 cm (H) x 12 cm (W) x 36 cm (L), weight: 7.0 kg (15.4 lbs), without counterweight 32-bit CISC processor 120 MHz Operating system: Android 6 or higher, iOS 9.0 or higher Connection: D-SUB 9PIN connector Autoguider input: ST4 Power consumption SX2WL+Wireless unit: DC12V / 0.3-2.0 A (load 8 kg), 0.4-2.2 A (load 12 kg) SCOPE OF DELIVERYSX2WL EQ mount Wireless unit Counterweight: 1.9 kg (1pc) Mounting tools Cigarette lighter cable