Vixen ​POLARIE Star Tracker set with M-155MA tripod

The Vixen POLARIE Multi Mounting Block was developed to fit Vixen profile dovetail rails, such as the Vixen Dovetail Slide Bar DD, to the Polarie Star Tracker. In this way you can increase the load capacity of the tracker up to 6.5 kg! By releasing the clamping lever on the multiple assembly block, you can move the dovetail freely and clamp it again, making balancing of your camera or telescope rig an easy task. The hole in the middle of the multiple mounting block enables the photographer to carry out the polar alignment without removing the POLARIE polar finder PFL with the dovetail rail DD or the dovetail rail PG. Using one of these combinations, you can easily put deep sky photography into practice with a telephoto lens, or compact telescope. PROPERTIES Allows the inclusion of dovetail rails The Star Tracker can hold up to 6.5 kg in weight Allows the use of telephoto lenses Polar alignment possible without removing the polar finder Weight: 440g WHAT'S INCLUDED POLARIE multiple assembly block Assembly tool

The DD dovetail mount was developed for the POLARIE multi-mounting block to attach camera equipment - from DSLR cameras, to telephoto lenses or even compact telescopes. Using this accessory, the load capacity of the POLARIE Star Tracker is increased to up to 6 kg. To make it easier to find the Pole Star, there is a wide slot in the dovetail for the polar finder. In addition to the regular accessories, two cameras can also be balanced on both sides of the existing photo thread (1/4 inch) with optional ball heads. PROPERTIES Accessories for the POLARIE multi-mounting block Allows you to balance the camera Increases the load capacity of the POLARIE Star Tracker to 6 kg Allows a counterweight to be attached Hole bores 1x 1/4 inch, 1x 1/4 inch external thread, 2xM6 internal thread on the plate WHAT'S INCLUDED Dovetail rail DD

Attachment plates, such as the ARCA SWISS are compatible with this quick-release panorama plate. (Note: angle plate is not included in # 35527). The base of the Vixen Quick Release Panorama Clamp can be rotated 360 degrees so that the position of the mounted camera system can be adjusted simply by loosening the clamping lever. In addition to the recommended Vixen dovetail bar DD and top plate, the camera mount is also compatible with other devices with 1/4 ", 3/8" inch screws. The recommended accessory is the X000096 Angle L Bracket for portrait and landscape photography. PROPERTIES Can be rotated 360 degrees ARCA SWISS compatible Weight: 320g WHAT'S INCLUDED Quick-release panorama plate Screws and tools

The counterweight rod is attached to the dovetail rail using a 1/4 inch photo screw. It is compatible with the Vixen counterweights 1.0 kg, 1.9 kg, 2.8 kg and 3.7 kg and is used to balance the AP Photoguiders, the Polarie or the Polarie U Star Tracker. PROPERTIES Shank diameter: 20mm Size: diameter 23x135mm Effective length of the counterweight rod: 130mm Weight: 330g WHAT'S INCLUDED Counterweight rod Locking screw

With the 1.9 kg counterweight, heavier optical tubes can be balanced on many Vixen mounts. COMPATIBLE WITH THE FOLLOWING VIXEN MOUNTS SX SX2 SXD SXD2 SXP GP2 GPD2 SCOPE OF DELIVERY 1x 1.9 kg counterweight

For balancing the Polarie Star Tracker in connection with the counterweight bar. The counterweight of 1.0 kg is also compatible with GP, SX mounts and mounts with 20 mm counterweight bar PROPERTIES Suitable for Polarie Star Tracker, GP, SX and AP mount For counterweight rods with a diameter of 20 mm Weight: 1.0 kg WHAT'S INCLUDED Weight: 1.0 kg Locking Bolt

This accessory includes a compass with a spirit level and a height scale. The compass helps you to quickly locate the polar star when it is hidden behind trees or a mountain. The compass attaches to the accessory shoe on the Polarie Star Tracker or a device with a camera accessory shoe. FEATURES Compass Oil-filled compass Azimuth dimensions: 1° steps Height adjustment: 5° steps (max. +/- 70°) Markings: marked with luminous paint Spirit level: Built-in spirit level DELIVERY CONTENTS QPL compass

The perfect LED head torch for nighttime observations! Adjusting your eyes to the dark surroundings is very important when making astronomical observations. In dark areas, it is very difficult to use astronomical equipment without a suitable light. With normal lights, however, the light intensity is more important than protecting your eyes against bright light. Using these lights at night makes your pupils contract, which can make it difficult for your eyes to readjust to the darkness. The SG-L01, our first astronomy LED lamp, featured a built-in red LED that provided a solution to this problem. However, the red light did not offer optimal visibility. On our new astronomy LED light, the SG-L02, the LED lights produce warm light to improve visibility. They also ensure that your eyes stay adapted to the dark. The LEDs do not emit light in the sensitive range of 555 nm. The brightness of the white light can be adjusted between 3 and 42 lumen, while the red light can be adjusted between 0.28 and 7.62 lumen. FEATURES Dimmable red light ensures that your eyes stay adapted to the dark Built-in rechargeable battery, charges via USB Waterproof design LED colour can be switched from red to white 0.28 to 7.62 lumen for red light 3 to 42 lumen for white light Dimensions: 41 mm x 33 mm x 30 mm Weight: 29 g DELIVERY CONTENT SG-L02 head torch Strap (size S) Strap (size L) Pocket clip Cable for charging the battery (USB-A plug to USB Micro-B plug)

In the northern hemisphere*, simply position the polar star and two additional stars in the finder’s field of view so that each star is aligned with the corresponding positions in the finder reticle. This enables you to easily configure the equatorial mount with an accuracy of 3 arc minutes or less. The new design of the polar scope eyepiece improves the visibility of stars and makes the scale easier to read. *Three stars for polar orientation in the southern hemisphere are located in Octans. What is the polar alignment scope? The polar alignment scope is a small telescope that is installed parallel to the R.A. axis of an equatorial mount such that it matches the R.A. axis to be parallel in the direction of the diurnal motion of stars. The polar alignment scope utilizes 3 stars (Polaris, Delta UMi and 51 Cep) near the north celestial pole. To locate the north celestial pole, simply align the positions on the reticle in the polar alignment scope with the 3 designated stars. In addition, the patterns of the Big Dipper and Cassiopeia are engraved on the polar alignment reticle for use as a guide for the north celestial pole. The polar alignment scope can align the polar axis of the equatorial mount as accurately as 3 arc minutes or less. The marks and patterns on the built-in reticle provide everything that you need for polar alignment The necessary information for polar alignment is integrated into the reticle, which is designed for locating the north (or south) celestial pole. It is not necessary to configure an hour angle setting in the dark. This makes polar alignment easier, as you can look through the eyepiece of the polar alignment scope. A free app is available to download via the following link. https://www.vixen.co.jp/app/ Dark field illumination (with automatic power off function) The switch on the polar alignment scope’s brightness adjustment dial illuminates the reticle in red when activated. Compared with bright field illumination, this prevents less bright stars from disappearing from the scope's field of view. The brightness can be adjusted in 8 levels by turning the brightness adjustment dial. The red light dims gradually after a certain period of time and turns off automatically. Easy to set up Remove the mounting block on the front side and the cap on the rear side of the POLARIE. Then insert the POLARIE PF-L finder scope into the POLARIE to complete the installation. The telescope is ready for use in no time! FEATURES Easy alignment via reference stars Dimmable red light No date or time settings required Light switches off automatically Free app from https://www.vixen.co.jp/app/ DELIVERY CONTENT 1x PF-L II polar finder 1x CR2032 battery

The soft padded Vixen accessory bag can be attached to a tripod, keeping your accessories close at hand. The bag is exactly the right size for the Polarie U Star tracker. But also other accessories, such as a camera lens, batteries or the remote control of your camera can be stored safely and within reach in this soft bag. The neoprene material, which absorbs shocks excellently and offers good thermal insulation, protects your accessories extremely well. and protects your batteries and USB battery packs from extreme cold. FEATURESAccessory bag for attaching to a tripod Perfect fit for the Polarie U Star Tracker Suitable to keep all kinds of accessories clos at hand Material: neoprene, polyester Dimensions: 11 x 13 cm Weight: 95 g SCOPE OF DELIVERYTripod accessory bag Fastening strap