Vixen POLARIE U Polsucher PF-L II Set

The Vixen POLARIE Multi Mounting Block was developed to fit Vixen profile dovetail rails, such as the Vixen Dovetail Slide Bar DD, to the Polarie Star Tracker. In this way you can increase the load capacity of the tracker up to 6.5 kg! By releasing the clamping lever on the multiple assembly block, you can move the dovetail freely and clamp it again, making balancing of your camera or telescope rig an easy task. The hole in the middle of the multiple mounting block enables the photographer to carry out the polar alignment without removing the POLARIE polar finder PFL with the dovetail rail DD or the dovetail rail PG. Using one of these combinations, you can easily put deep sky photography into practice with a telephoto lens, or compact telescope. PROPERTIES Allows the inclusion of dovetail rails The Star Tracker can hold up to 6.5 kg in weight Allows the use of telephoto lenses Polar alignment possible without removing the polar finder Weight: 440g WHAT'S INCLUDED POLARIE multiple assembly block Assembly tool

The POLARIE U is an ultra-compact automatic star tracking device that can be easily transported.In addition to the functions of conventional star trackers, which track a camera for a long exposures, accurately tracking the regular movement of celestial objects, the POLARIE U has a speed adjustment function, which allows it to be used as a panning mount too for time lapse photography.Using a smartphone, you can control the shutter release intervals of the images. Through the communication between the smartphone and the POLARIE U Star Tracker, you can control the exposures and take beautiful, sharp pictures of the stars and the Milky Way without getting any star trailing.The Star Tracker is very small and light weight, making it ideal for mobile use or air travel.The Vixen POLARIE U Star Tracker in detail:Star-scape photography (stars and landscape).A silhouetted landscape on earth is photographed together with the starry sky. The beauty of a landscape and the starry sky can be shown together on one photo. POLARIE U opens up a wonderful foreign world of star-scape photography and makes this possible for both beginners and advanced photographers.Conventional telescopic astrophotography photographs a relatively narrow area of the sky. Star-scape photography mainly uses a wide-angle lens and takes impressive photos in which stars, and other celestial targets such as the majestic Milky Way and landscapes are combined. The possibilities of the compositions are endless and a completely new kind of landscape photography opens up.Weight reduction of more than 20% and improved load capacity.The structure of the original POLARIE has been completely changed. The distance between the two bearings that support the rotating shaft is about four times the distance of the previous model. This leads to a higher load capacity despite the weight reduction of 20%. The maximum load capacity is 2.5 kg (approx. 2.5 kg at 10 cm from the centre of rotation) when used for wide-field astrophotography. The maximum load capacity is increased to 6.5 kg (approx. 6.5 kg at 10 cm from the centre of rotation) when a POLARIE Multi mounting block (optional) and a dovetail slide rail DD (optional) are combined. In addition, used in vertical configuration, the POLARIE U can reach a load capacity of 10 kg (approx. 10 kg 10 cm from the centre of rotation) for time-lapse photography and is therefore suitable for heavy camera equipment.Settings via SmartphoneCommunication between tracker and smartphone via the Vixen Polarie U App enables various settings via smartphones or tablet. For star/landscape photography, the speed is selected in user-defined mode, and for time-lapse photography, settings for interval time, exposure, and rotation speed can also be easily programmed.Five different speeds:Star-scape photography (half star speed). This setting is intended for displaying a landscape together with the starry sky. The stars are not tracked exactly, but slower in order not to blur the landscape in the foreground. This way you get beautiful images of the landscape and the starry sky.Wide Field Astrophotography (Star Speed)When this mode is selected, the POLARIE U follows the stars at the same speed as the daily movement of the stars. In this mode, widefield long time exposures of comets, nebulae, star clusters and the Milky Way are made and tracked precisely.Solar Tracking (solar speed)For recording solar eclipses over a long period of time.Moon Tracking (moon speed)For recording lunar eclipses over a long period of time.Custom ModeThis allows you to set the POLARIE U to the desired tracking speed. The initial setting is four times the star speed. If you want to change the setting for a different speed, a smartphone or other wifi device and application software are required.Shoot-Move-Shoot ModeIt is possible to stop the movement of the camera during the exposure and restart it after the end of the exposure. It is also equipped with a camera connector (shutter release) that controls the camera shutter during shooting with SMS or interval shooting. If the camera in use is connected with the cable release, the settings can be easily adjusted using a smartphone. A Wi-Fi connection is required when using this feature. An additional cable is required to connect the camera and POLARIE U together.Autoguider portCommercially available autoguiders can be used with the POLARIE U (Usable only in R.A.).  An important new feature over the original Polarie - attach a small Guidescope, or Off Axis Guider and autoguiding camera to your main camera and use the standard ST-4 protocol port to guide the Polarie U in Right Ascension, ensuring absolute accuracy of tracking (requires additional separate computer, or standalone guider). FEATURES    Speeds: Sidereal rate, 0.5X star speed, sun, moon. North / South hemisphere compatible    Operating System: Android 4.4 and over or iOS 9.9 and over Wi-Fi: IEEE 802.11b/g    Worm gear: RA gear rim with 144 teeth (58.4 mm Al alloy)    Screw: 9.8 mm brass    RA and DC axis: 40mm, aluminium alloy    Motor drive: electric motor drive with impulse motor (stepper motor)    Load capacity: 2.5 kg standard, 6.5 kg with special accessories, 10 kg with fast motion    Wi-Fi function for Smartphone    Direction finder tube: 8.9 degree field of view without magnification.    Power supply: USB Type-C or 4x AA batteries    Dimensions: 88.5mm x 72mm x 110.5mm    Weight: 575gSCOPE OF DELIVERY    POLARIE U Star Tracker    Attachable direction finder

The DD dovetail mount was developed for the POLARIE multi-mounting block to attach camera equipment - from DSLR cameras, to telephoto lenses or even compact telescopes. Using this accessory, the load capacity of the POLARIE Star Tracker is increased to up to 6 kg. To make it easier to find the Pole Star, there is a wide slot in the dovetail for the polar finder. In addition to the regular accessories, two cameras can also be balanced on both sides of the existing photo thread (1/4 inch) with optional ball heads. PROPERTIES Accessories for the POLARIE multi-mounting block Allows you to balance the camera Increases the load capacity of the POLARIE Star Tracker to 6 kg Allows a counterweight to be attached Hole bores 1x 1/4 inch, 1x 1/4 inch external thread, 2xM6 internal thread on the plate WHAT'S INCLUDED Dovetail rail DD

For balancing the Polarie Star Tracker in connection with the counterweight bar. The counterweight of 1.0 kg is also compatible with GP, SX mounts and mounts with 20 mm counterweight bar PROPERTIES Suitable for Polarie Star Tracker, GP, SX and AP mount For counterweight rods with a diameter of 20 mm Weight: 1.0 kg WHAT'S INCLUDED Weight: 1.0 kg Locking Bolt

​For precise polar alignment of the POLARIE U Star Tracker.With this fine adjustment unit DX you can make sensitive movements in all directions in order to achieve an exact polar alignment.There is a quick-release fastener at the head of the fine-adjustment, which is compatible with the Vixen quick-change angle plate, or the Arca Swisssystem. You can attach or remove your Star Tracker quickly. An optional dovetail plate mounting block is available for versatile use.Thanks to the two M8 threaded holes at a distance of 35 mm on the head, the quick release can be exchanged for the separately available dovetail mounting block.This enables the straightforward mounting of telescopes or heavy telephoto lenses, like the Vixen FL55SS telescope.The fine adjustment DX is equipped with a 1/4 "or 3/8" thread and can therefore be used on all common photo tripods.This tripod adapter can be exchanged for a Vixen tripod adapter in order to be able to connect the fine adjustment unit to the heavier duty Vixen telescopic tripods too.The fine adjustment DX enables a large adjustment range from -30 degrees to 90 degrees and 360 degrees in azimuth.The mounted camera can be tilted freely from 0 degrees (horizontal) to 90 degrees (vertical) by loosening the clamping lever. The fine adjustments can be adjusted in a range of +/- 7.5 degrees.PROPERTIES1/4 "or 3/8" thread for photo tripods-30 degrees to 90 degrees and 360 degrees adjustable in azimuthFine adjustments in the range of +/- 7.5 degrees adjustable2 degrees adjustment per turn of the screwArca Swiss System compatibleAdaptable to Vixen telescopic tripodsAssembly of telescopes or heavy telephoto lensesOver 8 kg payload possibleWHAT'S INCLUDEDPole fine adjustment unit DXQuick release clampAngle plate L adapter for Vixen telescopic tripods with 45mm connectionTechnical specifications

The counterweight rod is attached to the dovetail rail using a 1/4 inch photo screw. It is compatible with the Vixen counterweights 1.0 kg, 1.9 kg, 2.8 kg and 3.7 kg and is used to balance the AP Photoguiders, the Polarie or the Polarie U Star Tracker. PROPERTIES Shank diameter: 20mm Size: diameter 23x135mm Effective length of the counterweight rod: 130mm Weight: 330g WHAT'S INCLUDED Counterweight rod Locking screw