Vixen Quick Release L-Bracket

Mounting plate for telephoto lenses or small telescopes

  • Arca Swiss standard connection rail
  • Allows recordings in portrait and landscape format
  • For attaching a camera, telephoto lens or telescope
  • Dimensions: 120mm x 38.1mm x 71.5mm
  • Weight: 110 g

Currently not available

Product number: X000095
EAN: 4955295355266
WEEE-Reg.-Nr.: DE 34323861
Product information "Vixen Quick Release L-Bracket"
The Vixen quick-change angle plate is a mounting plate with 1/4 '' screw, designed for holding DSLR cameras, telephoto lenses or small telescopes in combination with the Vixen Polarie panorama clamp.
It enables imaging in portrait or landscape format. The connection is the well-known Arca Swiss standard.

PROPERTIES

  • Arca Swiss standard connection
  • Allows recordings in portrait and landscape format
  • For attaching a camera, telephoto lens or telescope
  • Dimensions: 120mm x 38.1mm x 71.5mm
  • Weight: 110 g

WHAT'S INCLUDED

  • Quick-change angle plate
  • Assembly tool
  • Screws
Batteries required: No
Colour: black
Material: Aluminium
Net Weight total (incl. accessories) (g): 110
Total length (mm): 120

Produkt- und Sicherheitshinweise


Manufacturer: 
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede

Contact: 
www.bresser.de


Warning notes
  • General safety instructions DANGER Risk of suffocation! Improper use of this product can result in suffocation, especially for children. Therefore, carefully observe the following safety instructions. Keep packaging materials (plastic bags, rubber bands, etc.) away from children! There is a risk of suffocation! Keep cords, ribbons, and similar materials away from children! They could accidentally strangle themselves and suffocate! NOTE Risk of material damage! Improper handling can damage the device and/or accessories. Therefore, only use the device according to the following safety instructions. Do not dismantle the device! In the case of a defect, contact your dealer. They will contact the service center and may send the device in for repair.
  • Never look at the sun through an eyepiece/telescope without a certified protection filter. A moon filter can never be used for solar observation. The moon filter is only suitable for moon observation. The solar filter must be mounted in front of the telescope opening, not at the eyepiece. Otherwise, the concentrated light beam through the optics will immediately destroy the filter foil, leading to severe eye damage, including permanent blindness.
  • Never leave the optics unattended. Children and inexperienced adults could point the telescope at the sun without proper precautions and lose their eyesight.
  • Do not expose the device to high temperatures.

Accessories

€50 Gift Card
BRESSER Gift Voucher worth 50€  Every year, birthdays, anniversaries, Christmas, and other special occasions come around relentlessly. And with them, the same question arises: How can we bring joy to our loved ones on these special occasions? Send men, women, and children on unique journeys of discovery with a BRESSER voucher.  Give the gift of foresight – the BRESSER voucher worth 50 euros  A gift only brings joy to both sides if it suits the recipient. This is how you can tell that a BRESSER gift voucher is guaranteed to be received with a joyful smile: Do one or more of the following statements apply?  The recipient … … gazes through the telescope at the sky on every clear night. … always takes a soil sample on vacation, which is then examined under the microscope at the hotel. … loves exploring nature with open eyes while hiking, camping, or hunting. … passionately runs their own photo studio. … never misses the weather forecast. … is enthusiastic about innovative technology and new gadgets. … is open to everything and always strives to expand their horizons. A match? Then you’ve found the perfect gift with a BRESSER voucher. Whether an absolute beginner or a passionate professional, the diverse products in the fields of astronomy, microscopy, sport optics, photo studio, weather & time, and electronics allow your loved ones to gain wonderful insights into fascinating worlds. And it’s not just for the grown-up explorers: Surprise children with a BRESSER voucher, enabling them to engage with science in a playful and age-appropriate way.  How to get the 50-euro BRESSER voucher Would you like to open up new perspectives for a loved one? It couldn't be easier: Choose one of the beautiful voucher designs. Astronomy, microscopy, electronics, etc. – there’s a great look for every area of interest. Important: No matter which design you choose, every gift voucher can, of course, be redeemed throughout the entire shop at bresser.de. Enter your name and the name of the recipient. You can then write a message of up to 300 characters to make your voucher a truly personal gift. Now just add it to your shopping cart and complete the payment. Once the order process is complete, the gift voucher is sent as a PDF directly to your email inbox. From there, you can send it digitally from afar or print it out and present it in person.  Give the gift of a broader perspective – with the BRESSER 50-euro voucher for women, men, and children. 

€50.00*
Vixen POLARIE U Polsucher PF-L II Set
You need this Vixen polar finder set for the POLARIE U Star Tracker in order to be able to align the POLARIE U exactly to the celestial pole. This is very important for longer focal lengths and exposure times, in order to obtain point-like star images. The polar finder enables polar alignment with an accuracy of 3 arc minutes . The polar alignment is very simple: You only have to bring the Pole Star and two other stars into the field of view of the polar finder and rotate them with the stars so that they are congruent with the reticule shown in the polar finder.  No further calculation is needed - no time and date to set, just match the reticule to the polar stars and get imaging. The polar finder PF-L II has red, dimmable lighting that switches itself off after a few minutes in order to save the batteries.PROPERTIES5 x 20 viewfinder with 10 ° field of view3 star positioningNorthern skies: Polaris, Delta UMI, 51 CepSouthern skies: Chi Octantis, Tau Octantis, Sigma OctantisDimmable, red lighting in 8 levelsWHAT'S INCLUDEDPole finder PF-L IIMounting armCR 2032 battery

€325.00*
Vixen Dovetail Slide Bar DD for POLARIE Star Tracker Astrophotography Mount
The DD dovetail mount was developed for the POLARIE multi-mounting block to attach camera equipment - from DSLR cameras, to telephoto lenses or even compact telescopes. Using this accessory, the load capacity of the POLARIE Star Tracker is increased to up to 6 kg. To make it easier to find the Pole Star, there is a wide slot in the dovetail for the polar finder. In addition to the regular accessories, two cameras can also be balanced on both sides of the existing photo thread (1/4 inch) with optional ball heads. PROPERTIES Accessories for the POLARIE multi-mounting block Allows you to balance the camera Increases the load capacity of the POLARIE Star Tracker to 6 kg Allows a counterweight to be attached Hole bores 1x 1/4 inch, 1x 1/4 inch external thread, 2xM6 internal thread on the plate WHAT'S INCLUDED Dovetail rail DD

€105.00*
Vixen POLARIE Multi Mounting Block
The Vixen POLARIE Multi Mounting Block was developed to fit Vixen profile dovetail rails, such as the Vixen Dovetail Slide Bar DD, to the Polarie Star Tracker. In this way you can increase the load capacity of the tracker up to 6.5 kg! By releasing the clamping lever on the multiple assembly block, you can move the dovetail freely and clamp it again, making balancing of your camera or telescope rig an easy task. The hole in the middle of the multiple mounting block enables the photographer to carry out the polar alignment without removing the POLARIE polar finder PFL with the dovetail rail DD or the dovetail rail PG. Using one of these combinations, you can easily put deep sky photography into practice with a telephoto lens, or compact telescope. PROPERTIES Allows the inclusion of dovetail rails The Star Tracker can hold up to 6.5 kg in weight Allows the use of telephoto lenses Polar alignment possible without removing the polar finder Weight: 440g WHAT'S INCLUDED POLARIE multiple assembly block Assembly tool

€159.00*
Vixen POLARIE U Star Tracker
The POLARIE U is an ultra-compact automatic star tracking device that can be easily transported.In addition to the functions of conventional star trackers, which track a camera for a long exposures, accurately tracking the regular movement of celestial objects, the POLARIE U has a speed adjustment function, which allows it to be used as a panning mount too for time lapse photography.Using a smartphone, you can control the shutter release intervals of the images. Through the communication between the smartphone and the POLARIE U Star Tracker, you can control the exposures and take beautiful, sharp pictures of the stars and the Milky Way without getting any star trailing.The Star Tracker is very small and light weight, making it ideal for mobile use or air travel.The Vixen POLARIE U Star Tracker in detail:Star-scape photography (stars and landscape).A silhouetted landscape on earth is photographed together with the starry sky. The beauty of a landscape and the starry sky can be shown together on one photo. POLARIE U opens up a wonderful foreign world of star-scape photography and makes this possible for both beginners and advanced photographers.Conventional telescopic astrophotography photographs a relatively narrow area of the sky. Star-scape photography mainly uses a wide-angle lens and takes impressive photos in which stars, and other celestial targets such as the majestic Milky Way and landscapes are combined. The possibilities of the compositions are endless and a completely new kind of landscape photography opens up.Weight reduction of more than 20% and improved load capacity.The structure of the original POLARIE has been completely changed. The distance between the two bearings that support the rotating shaft is about four times the distance of the previous model. This leads to a higher load capacity despite the weight reduction of 20%. The maximum load capacity is 2.5 kg (approx. 2.5 kg at 10 cm from the centre of rotation) when used for wide-field astrophotography. The maximum load capacity is increased to 6.5 kg (approx. 6.5 kg at 10 cm from the centre of rotation) when a POLARIE Multi mounting block (optional) and a dovetail slide rail DD (optional) are combined. In addition, used in vertical configuration, the POLARIE U can reach a load capacity of 10 kg (approx. 10 kg 10 cm from the centre of rotation) for time-lapse photography and is therefore suitable for heavy camera equipment.Settings via SmartphoneCommunication between tracker and smartphone via the Vixen Polarie U App enables various settings via smartphones or tablet. For star/landscape photography, the speed is selected in user-defined mode, and for time-lapse photography, settings for interval time, exposure, and rotation speed can also be easily programmed.Five different speeds:Star-scape photography (half star speed). This setting is intended for displaying a landscape together with the starry sky. The stars are not tracked exactly, but slower in order not to blur the landscape in the foreground. This way you get beautiful images of the landscape and the starry sky.Wide Field Astrophotography (Star Speed)When this mode is selected, the POLARIE U follows the stars at the same speed as the daily movement of the stars. In this mode, widefield long time exposures of comets, nebulae, star clusters and the Milky Way are made and tracked precisely.Solar Tracking (solar speed)For recording solar eclipses over a long period of time.Moon Tracking (moon speed)For recording lunar eclipses over a long period of time.Custom ModeThis allows you to set the POLARIE U to the desired tracking speed. The initial setting is four times the star speed. If you want to change the setting for a different speed, a smartphone or other wifi device and application software are required.Shoot-Move-Shoot ModeIt is possible to stop the movement of the camera during the exposure and restart it after the end of the exposure. It is also equipped with a camera connector (shutter release) that controls the camera shutter during shooting with SMS or interval shooting. If the camera in use is connected with the cable release, the settings can be easily adjusted using a smartphone. A Wi-Fi connection is required when using this feature. An additional cable is required to connect the camera and POLARIE U together.Autoguider portCommercially available autoguiders can be used with the POLARIE U (Usable only in R.A.).  An important new feature over the original Polarie - attach a small Guidescope, or Off Axis Guider and autoguiding camera to your main camera and use the standard ST-4 protocol port to guide the Polarie U in Right Ascension, ensuring absolute accuracy of tracking (requires additional separate computer, or standalone guider). FEATURES    Speeds: Sidereal rate, 0.5X star speed, sun, moon. North / South hemisphere compatible    Operating System: Android 4.4 and over or iOS 9.9 and over Wi-Fi: IEEE 802.11b/g    Worm gear: RA gear rim with 144 teeth (58.4 mm Al alloy)    Screw: 9.8 mm brass    RA and DC axis: 40mm, aluminium alloy    Motor drive: electric motor drive with impulse motor (stepper motor)    Load capacity: 2.5 kg standard, 6.5 kg with special accessories, 10 kg with fast motion    Wi-Fi function for Smartphone    Direction finder tube: 8.9 degree field of view without magnification.    Power supply: USB Type-C or 4x AA batteries    Dimensions: 88.5mm x 72mm x 110.5mm    Weight: 575gSCOPE OF DELIVERY    POLARIE U Star Tracker    Attachable direction finder

€599.00*
Vixen Quick Release Panorama Plate
Attachment plates, such as the ARCA SWISS are compatible with this quick-release panorama plate. (Note: angle plate is not included in # 35527). The base of the Vixen Quick Release Panorama Clamp can be rotated 360 degrees so that the position of the mounted camera system can be adjusted simply by loosening the clamping lever. In addition to the recommended Vixen dovetail bar DD and top plate, the camera mount is also compatible with other devices with 1/4 ", 3/8" inch screws. The recommended accessory is the X000096 Angle L Bracket for portrait and landscape photography. PROPERTIES Can be rotated 360 degrees ARCA SWISS compatible Weight: 320g WHAT'S INCLUDED Quick-release panorama plate Screws and tools

€105.00*
Vixen AP Photo Guider Shaft
The counterweight rod is attached to the dovetail rail using a 1/4 inch photo screw. It is compatible with the Vixen counterweights 1.0 kg, 1.9 kg, 2.8 kg and 3.7 kg and is used to balance the AP Photoguiders, the Polarie or the Polarie U Star Tracker. PROPERTIES Shank diameter: 20mm Size: diameter 23x135mm Effective length of the counterweight rod: 130mm Weight: 330g WHAT'S INCLUDED Counterweight rod Locking screw

€52.00*
Vixen counterweight 2.8 kg
2.8-kg counterweight for mount counterweight barsUse counterweights to balance your mount. Multiple counterweights may be required depending on the telescope.FEATURESSuitable for SX, SXD, GP2 and GPD2 mountsWeight: 2,800 gPACKAGE CONTENTS2.8-kg counterweight

€62.00*
Vixen Counterweight 1.9kg
With the 1.9 kg counterweight, heavier optical tubes can be balanced on many Vixen mounts. COMPATIBLE WITH THE FOLLOWING VIXEN MOUNTS SX SX2 SXD SXD2 SXP GP2 GPD2 SCOPE OF DELIVERY 1x 1.9 kg counterweight

€52.00*

Customers also viewed

%
EXPLORE SCIENTIFIC Camera Dovetail Kit for iEXOS-100 Mount
Universal mounting rail for mounting a photo camera on an EQ mount with Vixen GP mount for astrophotography. The EXPLORE SCIENTIFIC camera dovetail rail is made of die-cast aluminium. The dovetail-shaped mounting rail is 45 mm wide (similar to the Vixen dovetail style) and 280 mm long. The matt black anodized surface has a laser engraved scale on one side with a fine graduation with 2 mm increments. This makes it easier to determine the center of gravity when placing the camera on the mounting head. To protect the clamping surface there is a stainless steel clamping plate on the opposite side. The dovetail plate is equipped with rubber inserts at 3 positions. This allows a secure mounting of the camera equipment and prevents unintentional slipping and twisting. The mounting rail has a screw fastening with 1/4 inch photo thread, which is suitable for almost all commercially available camera systems. The screw attachment can be used in 3 different elongated hole positions to adjust a perfect balance. In addition, an adapter from 1/4 inch to 3/8 inch photo thread is also included, so that ball heads with the larger thread version can also be used directly. The camera mounting rail weighs only 250 grams. Suitable for all EXPLORE SCIENTIFIC and BRESSER mounts and also mounts of other brands that accept the popular Vixen-GP dovetail rail. FEATURES Universal camera mounting rail Dovetail with 45 mm width Length 280mm; weight 250 grams Suitable for EQ mounts with Vixen GP dovetail Camera mounting screw with 1/4 inch photo thread Thread adapter 1/4 inch to 3/8 inch Laser engraved scale with 2 mm fine graduation Stainless steel clamping plate Rubber inserts against slipping and twisting 3 elongated holes for mounting the camera SCOPE OF DELIVERY Camera mounting rail Mounting screw 1/4 inch Thread adapter 3/8 inch

€55.00* €69.00* (20.29% saved)