Product information "Vixen reducing sleeve 36.4–31.7 mm"
This eyepiece adapter for 36.4-mm to 31.7-mm eyepiece mount is suitable for use with 31.7-mm eyepieces with older Vixen OTAs that are fitted with a 36.4-mm focuser.
FEATURES
Eyepiece adapter 36.4 mm to 31.7 mm
Adapts 36.4-mm fittings for mounting 31.7-mm eyepieces
Compatibility: For older Vixen OTAs with 36.4-mm focuser
General safety instructions DANGER Risk of suffocation! Improper use of this product can result in suffocation, especially for children. Therefore, carefully observe the following safety instructions. Keep packaging materials (plastic bags, rubber bands, etc.) away from children! There is a risk of suffocation! Keep cords, ribbons, and similar materials away from children! They could accidentally strangle themselves and suffocate! NOTE Risk of material damage! Improper handling can damage the device and/or accessories. Therefore, only use the device according to the following safety instructions. Do not dismantle the device! In the case of a defect, contact your dealer. They will contact the service center and may send the device in for repair.
Never look at the sun through an eyepiece/telescope without a certified protection filter. A moon filter can never be used for solar observation. The moon filter is only suitable for moon observation. The solar filter must be mounted in front of the telescope opening, not at the eyepiece. Otherwise, the concentrated light beam through the optics will immediately destroy the filter foil, leading to severe eye damage, including permanent blindness.
Never leave the optics unattended. Children and inexperienced adults could point the telescope at the sun without proper precautions and lose their eyesight.
This Vixen 90° mirrored Star Diagonal, with 1.25” / 31.7 mm nosepiece connection, makes observing objects higher up in the sky much more pleasant and also allows the user to revolve an eyepiece to a more comfortable observing position. This star diagonal is a good quality option and compatible with a large array of refractors and Cassegrain design instruments. It will accept 1.25” / 31.7mm eyepieces and accessories and also has a threaded nosepiece, into which can be fitted 1.25” filters, or Barlow elements, saving you the bother of having to keep swapping these when using different eyepieces. The inside of the diagonal is blackened to minimise internal reflections and light scatter and the body has a pleasingly well-engineered feel to it, without being too weighty.
Eyepieces and other accessories are held in place by a simple-to-operate knurled set screw.
As this is a mirrored diagonal, it also corrects the up/down orientation of image in astronomical refractors and Cassegrain telescopes, but please note that left and right will still be inverted within the field of view. Not suitable for use with Newtonian telescopes.
FEATURES
Nosepiece diameter: 1.25” / 31.7 mm
Weight: 124g
Accessories: Protective dust capsWHAT'S INCLUDED1.25"/31.7mm Star Diagonal
Protective dust caps
BRESSER 30mm Plössl Eyepiece 1,25" (31,7mm)
Since years a well known and approved Plössl eyepiece. Ideal to improve the performance of your telescopes for a low budget price.
All the BRESSER Plössl eyepieces provide sharp and high-contrast images because of the 4-lens design. All lenses have fully-multicoated surfaces which prevents reflections efficiently. Every eyepiece is equipped with a foldable rubber eyecup to avoid straylight from the sides and the inner eyepiece shaft is carefully blackened as well. Housing and eyepiece shaft are completely made from metal - no plastic is used. Filter thread for use with colour- and nebular filters is also available.
All these Plössl eyepieces offer a much better image quality than all the very simple made Kellner and Huygens eyepieces.
FEATURES
Focal length: 30 mm
Field of view: 50°
Lens-Design: 4 lenses in 2 groups , fully-multicoated
Housing material: completely made from metal
Rubber eyecup: YES, foldable
Filter thread: YES
Storage: Twist-pack
SCOPE OF DELIVERY
BRESSER Plössl eyepiece with rubber eyecup
Twist-pack
BRESSER 5mm Plössl Eyepiece 1,25" (31,7mm)
Since years a well known and approved Plössl eyepiece. Ideal to improve the performance of your telescopes for a low budget price.
All the BRESSER Plössl eyepieces provide sharp and high-contrast images because of the 4-lens design. All lenses have fully-multicoated surfaces which prevents reflections efficiently. Every eyepiece is equipped with a foldable rubber eyecup to avoid straylight from the sides and the inner eyepiece shaft is carefully blackened as well. Housing and eyepiece shaft are completely made from metal - no plastic is used. Filter thread for use with colour- and nebular filters is also available.
All these Plössl eyepieces offer a much better image quality than all the very simple made Kellner and Huygens eyepieces.
FEATURES
Focal length: 5 mm
Field of view: 50°
Lens-Design: 4 lenses in 2 groups , fully-multicoated
Housing material: completely made from metal
Rubber eyecup: YES, foldable
Filter thread: YES
Storage: Twist-pack
SCOPE OF DELIVERY
BRESSER Plössl eyepiece with rubber eyecup
Twist-pack
BRESSER 10mm Plössl Eyepiece 1,25" (31,7mm)
Since years a well known and approved Plössl eyepiece. Ideal to improve the performance of your telescopes for a low budget price.
All the BRESSER Plössl eyepieces provide sharp and high-contrast images because of the 4-lens design. All lenses have fully-multicoated surfaces which prevents reflections efficiently. Every eyepiece is equipped with a foldable rubber eyecup to avoid straylight from the sides and the inner eyepiece shaft is carefully blackened as well. Housing and eyepiece shaft are completely made from metal - no plastic is used. Filter thread for use with colour- and nebular filters is also available.
All these Plössl eyepieces offer a much better image quality than all the very simple made Kellner and Huygens eyepieces.
FEATURES
Focal length: 10 mm
Field of view: 50°
Lens-Design: 4 lenses in 2 groups , fully-multicoated
Housing material: completely made from metal
Rubber eyecup: YES, foldable
Filter thread: YES
Storage: Twist-pack
SCOPE OF DELIVERY
BRESSER Plössl eyepiece with rubber eyecup
Twist-pack
BRESSER 15mm Plössl Eyepiece 1,25" (31,7mm)
Since years a well known and approved Plössl eyepiece. Ideal to improve the performance of your telescopes for a low budget price.
All the BRESSER Plössl eyepieces provide sharp and high-contrast images because of the 4-lens design. All lenses have fully-multicoated surfaces which prevents reflections efficiently. Every eyepiece is equipped with a foldable rubber eyecup to avoid straylight from the sides and the inner eyepiece shaft is carefully blackened as well. Housing and eyepiece shaft are completely made from metal - no plastic is used. Filter thread for use with colour- and nebular filters is also available.
All these Plössl eyepieces offer a much better image quality than all the very simple made Kellner and Huygens eyepieces.
FEATURES
Focal length: 15 mm
Field of view: 50°
Lens-Design: 4 lenses in 2 groups , fully-multicoated
Housing material: completely made from metal
Rubber eyecup: YES, foldable
Filter thread: YES
Storage: Twist-pack
SCOPE OF DELIVERY
BRESSER Plössl eyepiece with rubber eyecup
Twist-pack
Adapter 2" with brass locking ring for 1,25" eyepieces. The integrated T2 thread adapts DSLR or astro-cameras (*appropriate T2 ring for your camera model needed). On the telescope side there is a 2" filter thread M48x0.75, which allows the easy use of colour and nebula filters.SCOPE OF DELIVERYCamera Adapter
The BRESSER camera adapter is the ideal connecting piece between your 35 mm SLR camera or DSLR and your telescope. The adapter is suitable for 1.25" eyepieces with a larger housing diameter of up to 55 mm. Please note, this adapter will be suitable for most Refractors and Cassegrain designs, but may not be suitable for use with all Newtonian designs of telescopes, due to the comparatively short travel of focus in some Newtonians. Please check with us if you'd like further advice regarding your particular telescope.FEATURESvariable camera adapterfor eyepiece projection and prime focusincludes a short prime focus adapter from 1.25" to T2 threadsuitable for 1.25" eyepieces up to 55mm housing diameter barrel diameter: 31.7mm (1.25")WHAT'S INCLUDEDvariable camera adapter
Explore Scientific 8x50 illuminated finder scopes (available in straight-thru and right angle versions) produce images that are right-side-up and left-to-right corrected views, which makes it easier to find objects in the sky.
The Explore 8 X 50 Straight-Thru Erect Image Illuminated Finder Scope, with its scale markings and open Center, not only helps you center objects precisely, but gives a reference of the exact field of view in Degrees. The deep red Illumination can be adjusted to just the right brightness. The eyepiece has comfortable eye relief and produces a 6,97 degrees field of view. Both the eyepiece and the main objective can be focused independently so that you can obtain perfect focus for your eyes. The straight-thru finderscope weights just under a pound (450gr), and measures 216mm" x 63mm" x 58mm".
FEATURES
High quality 8x50 upright viewfinder
With adjustable crosshair lighting with scale markings
Perfect image sharpness and good viewing behaviour
Large field of view FOV of 6.96 degrees
Focusing of lens and crosshair separately possible.
Multi-coated lens surfaces. Power supply by 2 pcs coin battery type LR41.FEATURESHigh quality 8x50 upright viewfinderWith adjustable crosshair illumination and with scale markingsPerfect image sharpness and good viewing behaviourLarge field of view FOV of 6.96 degreesFocusing of lens and crosshair separately possibleMulti-coated lens surfacesSCOPE OF DELIVERYFinder scopeFinder bracket
This extension tube extends back focus depth to an additional 66 mm, for Vixen 60mm diameter focusers. It is suitable for extending compatible focuser drawtubes for use visually without a Star Diagonal but most commonly extends focus travel for astrophotography in a prime focus position, or for straight-through use with Barlow lenses and other accessories.
FEATURES
Compatibility: all Vixen OTAs with 60mm diameter drawtubes
Weight: 115g
SCOPE OF DELIVERY
Extension tube 60 mm
The telescope set, consisting of the BRESSER Messier NT-150s/750 tube and the modern EXOS-2 PMC-Eight GoTo mount, is an impressive combination of portable, powerful optics and user-friendly mounting. Thanks to the parabolic primary mirror and the 150 mm aperture, you can capture impressive details of nebulae, galaxies, and many other fascinating celestial objects. The high-quality solar filter also allows for safe solar observation. With the reliable GoTo control and the user-friendly ExploreStars app, navigating the sky becomes effortless. Additionally, the tracking to compensate for Earth’s rotation is exceptionally precise with the PMC-Eight GoTo mount.
The Telescope
The BRESSER Messier NT-150 is distinguished by its good portability and razor-sharp optics with a parabolic primary mirror. The 150 mm aperture allows you to observe even smaller nebulae in the vastness of space. Discover the remnants of a massive star explosion from the year 1054 in the Taurus constellation or trace the glowing filaments of the Great Orion Nebula. Spot the famous Pinwheel Galaxy in the constellation Ursa Major or find the Dumbbell Nebula in the constellation Vulpecula. With the high-quality objective solar filter, you can also safely observe sunspots, eclipses, and planetary transits. (Warning: Never aim the telescope at the Sun without a solar filter!)
The Mount
The EXPLORE SCIENTIFIC EXOS-2 PMC-Eight GoTo mount is equipped with a modern and highly precise GoTo control system. It consists of a robust Wi-Fi controller unit, providing all necessary interfaces. The NEMA-11 stepper motors are directly connected to this unit via cable, and an ST-4 compatible autoguider interface is also available. Additionally, the control system supports micro-stepping to ensure precise tracking.
Intuitive control via app and graphical star map
The specially developed ExploreStars app for the PMC-Eight system impresses with an intuitive and visually appealing interface. The currently available alignment stars for control initialization, as well as all celestial objects in the database, are displayed as a star map with additional text information. All these objects can be easily viewed and selected.
Powerful controller unit with Open GoTo for customization
The heart of the controller unit consists of a fully autonomous 2-channel multi-processor with 8 CPUs and a Wi-Fi Ethernet 10/100 adapter with IP function. This enables remote operation via browser, ASCOM, app, or serial connection. The Open GoTo system also allows for custom firmware to be written and uploaded to the controller unit. This enables customized adjustments to the device's functions and the creation of custom object lists.
Polar finder included
The pre-installed polar finder scope included in the package allows for quick and precise polar alignment and long exposure times without unwanted star trails. The integrated LED lighting unit further enhances the usability of the polar finder.
FEATURES TELESCOPE
Design: Reflector telescope Mirror diameter: 150 mm / Focal length: 750 mm / F/5 Maximum useful magnification: 300x Very high-quality Hexafoc focuser with 2.5" clear inner diameter Diffraction-limited optics with parabolic primary mirror 6x30 finder with crosshair eyepiece Optimized finder bracket for comfortable viewing Handle for easy transport with integrated camera holder (photo thread screw) Smartphone adapter for sky navigation included Prism rail with stainless steel clamping surface T2 adapter for DSLR cameras (optional T2 ring required) 50.8-to-31.7 mm adapter with integrated T2 adapter (optional T2 ring required); with brass ring clamping
FEATURES MOUNT
Powerful PMC-8 Open GoTo system User-friendly and visually appealing ExploreStars OpenGoto app Wi-Fi control via tablet, notebook, or desktop PC with a minimum 7" display and Wi-Fi function (not included) Compatible operating systems: WIN8.1, WIN10/11, iOS, or Android 4.4 and higher Classic control via direction keys or joystick for guiding, centering, correcting, and slewing via touchscreen Intuitive 2-star and 3-star alignment for GoTo control initialization Multiprocessor microcontroller with 8 CPUs Micro-stepper NEMA-11 motors Highly precise and quiet belt drive ST-4 compatible autoguider interface ASCOM driver available, supports pulse guiding Ability to create custom firmware and object lists and upload them to the PMC-8 GPS compatible / settings depend on the computer or tablet used Power supply via 12-volt DC, with a maximum power consumption of 1.6 amps at full load
SCOPE OF DELIVERY
Optical tube 26 mm Super Plössl eyepiece (31.7 mm / 1.25") Integrated 31.7 mm and T2 adapter Prism rail with stainless steel clamping surface Adapter for 50.8 mm (2") eyepieces Rotating star map Objective solar filter Tube clamps with carrying handle and camera holder 6x30 finder scope Smartphone adapter for navigation Astronomy PC software Stellarium (via download) EXOS2-GT mount with Open GoTo PMC-8 Stainless steel tripod with built-in spirit level 2 x 4.5 kg counterweight Polar finder with lighting unit 12V / 2A power supply ExploreStars app via software download User manual
This Vixen 90° mirrored Star Diagonal, with 1.25” / 31.7 mm nosepiece connection, makes observing objects higher up in the sky much more pleasant and also allows the user to revolve an eyepiece to a more comfortable observing position. This star diagonal is a good quality option and compatible with a large array of refractors and Cassegrain design instruments. It will accept 1.25” / 31.7mm eyepieces and accessories and also has a threaded nosepiece, into which can be fitted 1.25” filters, or Barlow elements, saving you the bother of having to keep swapping these when using different eyepieces. The inside of the diagonal is blackened to minimise internal reflections and light scatter and the body has a pleasingly well-engineered feel to it, without being too weighty.
Eyepieces and other accessories are held in place by a simple-to-operate knurled set screw.
As this is a mirrored diagonal, it also corrects the up/down orientation of image in astronomical refractors and Cassegrain telescopes, but please note that left and right will still be inverted within the field of view. Not suitable for use with Newtonian telescopes.
FEATURES
Nosepiece diameter: 1.25” / 31.7 mm
Weight: 124g
Accessories: Protective dust capsWHAT'S INCLUDED1.25"/31.7mm Star Diagonal
Protective dust caps
With its 50 mm aperture, superb optics and four observation modes, the ZWO Seestar Smart Telescope S50 Pro AP50/260 is the ideal companion for anyone keen to explore the night sky. Packed with thoughtful upgrades, it's the most capable Seestar yet – small enough to take anywhere, but built with the kind of technology usually reserved for serious professional setups.Three steps to your first shot of spaceSet up the tripod, open the app, tap your target – and that's it. The S50 Pro takes care of alignment, focusing and tracking on its own, so within minutes you're already looking at stunning shots of the night sky right there on your screen. What used to be a fiddly, technical hobby is now something anyone can pick up, no experience needed.Four modes, one telescopeWhether you're after deep-sky objects or dramatic landscapes, the four shooting modes – Stargazing, Milky Way, Solar System and Scenery – have you covered. Capture stunning celestial objects with the same ease as birds or distant scenery, opening up all kinds of possibilities well beyond the night sky. Pop on the included solar filter and you can even get striking shots and videos of sunspots, solar transits and eclipses.50 mm aperture: more light, more detailThe 50 mm aperture gathers nearly three times as much light as a 30 mm lens, giving you noticeably sharper optical resolution. Paired with a powerful 8.3 MP sensor, the S50 Pro picks out the finest details in distant objects – from subtle features in deep-sky targets to the rugged texture of the Moon's surface. And thanks to its folded optical design, all this power comes in a body that's still compact and easy to carry.4K dual camera: two lenses working togetherThe S50 Pro's telephoto and wide-angle cameras work in tandem, both shooting in 4K UHD. The telephoto lens picks out fine detail with a 2.8° field of view, while the wide-angle camera takes in the whole star field at 63° – giving you the best of both worlds, from precise deep-sky shots to sweeping wide-angle astro images.Mosaic stitching for the bigger pictureThe mosaic feature stitches together several telephoto shots into one seamless image, so you get a wider view without losing detail – all in a single high-resolution photo of up to 8K. Perfect for capturing large objects in full.4-element apochromatic lensA four-element apo lens with ED (Extra-low Dispersion) glass keeps chromatic aberration to a minimum, giving you sharp, round stars against a clean, neutral black sky – for images that are crisp, clear and beautifully balanced.Triple filter systemThe astronomical light-pollution filter cuts through interference from moonlight and city lights, the dark-frame filter removes noise from long exposures, and the IR-cut filter blocks infrared interference for cleaner shots overall.A huge object database, all at your fingertipsPick a target from a database of over 80,000 deep-sky objects and more than 600,000 stars, then just hit GOTO. The S50 Pro finds, tracks and photographs it automatically, handing you a polished cosmic image in just a few minutes.Two worlds, one sharp imageThe S50 Pro automatically picks out the foreground landscape, locks it in place, and processes it separately from the sky above – and you can set how long this landscape lock lasts. While the stars stay pin-sharp thanks to precise tracking, the landscape below remains crisp and natural, giving you beautifully composed astro-landscape shots.Milky Way shots and star trails, made easyCapturing our own galaxy has never been simpler with this smart telescope. Star trails are just as effortless too – the S50 Pro turns long-exposure sequences into dynamic videos that beautifully capture the sky's movement overnight.Editing made simpleGet a finished image in seconds, or dive in and fine-tune it yourself. Star reduction, star removal, cropping, brightness, contrast, noise reduction, saturation and more are all built in, so you can bring out the best in every shot in just a few taps.Plan mode: let it run all nightSet up a full shooting plan in the app in just a few taps, then leave it to work through the night. The S50 Pro will automatically move between targets, capturing several celestial objects in a single session with no input needed from you.Built to go the distanceA bigger 10,000 mAh battery means up to 9 hours of stargazing per charge – plenty of time to make the most of a clear night.Open interfaces for the more advanced astronomerThe S50 Pro supports the open ASCOM Alpaca protocol, so it plays nicely with third-party astronomy software like N.I.N.A. – great for automated routines and more advanced imaging workflows. With optional accessories, you can even switch to equatorial mode, which compensates for the Earth's rotation and allows for longer exposures.FEATURESFully automatic smart telescope for night, landscape and solar observation4-element apochromatic refractor with ED glassLens diameter: 50 mm, focal length: 260 mm4K dual-camera system: telephoto (2.8° field of view), wide-angle (63° field of view)Sensors: OmniVision OS08B10 (telephoto); IMX586 (wide-angle)Resolution: 2160 x 3840 px (8.3 MP)Wide field of view with smart mosaic mode for the Milky Way and large-scale objectsOptic type: 4-element apochromatic refractorAutomatic image stacking for sharper, more detailed shots straight out of the boxLive view for real-time observation and photography4 shooting modes covering deep sky, solar system, Milky Way and landscape (wide-angle, close-up, timelapse and star trail shots)Solar filter included for solar observationControlled via an intuitive app (iOS/Android)Smart noise reductionBuilt-in filters, great for astrophotography even from the cityCompact, lightweight design built for portabilityBuilt-in Wi-FiHigh optical resolution for sharp, detailed astrophotographyShare your images straight to social media128 GB of built-in storageConnectivity: Wi-Fi, Bluetooth, NFCBuilt-in battery, 10,000 mAh, up to 9 hours of runtimeSCOPE OF DELIVERYSeestar S50 ProCarry caseSolar filterUSB-C cableTripodStickersInstruction manual
We use cookies to personalise and improve content and services, deliver relevant advertising and provide a secure experience. By clicking on "[Agree / Accept all / etc.]" you also give your consent to the disclosure of your behavior in our store to our partner, shopware AG (Ebbinghoff 10, 48624 Schöppingen, Germany), which cannot assign this data to you personally, but may process it for its own purposes (e.g. product improvements, market behavior analyses). You can review your cookie controls at any time. Learn more about the use and control of cookies in our privacy policy.Imprint
Functional cookies are absolutely necessary for the functionality of the web shop. These cookies assign a unique random ID to your browser so that your unhindered shopping experience can be guaranteed over several page views.
Google Pay payments
Amazon Pay
Stripe orig props:
Stripe referrer information.
Private machine identifier cookie:
Security token to identify the private machine.
Site auth:
Stripe authentication cookie.
Stripe csrf:
CSRF token.
ODOSCOPE
PayPal payments
Cookie settings:
The cookie is used to store the cookie settings of the site user over several browser sessions.
Information on origin:
The cookie stores the referrer and the first page visited by the user for further use.
Payment provider (Stripe) session
Timezone:
The cookie is used to provide the system with the user's current time zone.
CAPTCHA integration
Payment provider (Stripe) session
Stripe:
The cookie is used by the payment provider to increase security when processing payments on the website.
Cache handling:
The cookie is used to differentiate the cache for different scenarios and page users.
Session:
The session cookie stores your shopping data over several page views and is therefore essential for your personal shopping experience.
Payment provider (Stripe) fraud prevention
Payment provider (Stripe) fraud prevention
CSRF token:
The CSRF token cookie contributes to your security. It strengthens the security of forms against unwanted hacker attacks.
Google Tag Manager debug mode:
Allows to run the Google Tag Manager in debug mode.
Activated cookies:
Saves which cookies have already been accepted by the user for the first time.
YouTube video
Location maps:
We use OpenStreetMap as tile provider to show you visually the location of our stores and merchants.
Recently viewed products:
The cookie stores the most recently viewed products in order to suggest them on further product pages.
Wishlist
Customers also viewed:
The cookie stores the most recently viewed products in order to suggest them to other customers on product pages.
Cookies used for statistics and shop performance metrics.
Google Analytics
Conversion and usertracking via Google Tag Manager
Google Tag Manager:
Cookie from Google to control the advanced script and event handling.
Google Analytics:
Cookie from Google for website analysis. Generates statistical data about how the visitor uses the website.
Tracking cookies help the shop operator to collect and evaluate information about the behaviour of users on their website.
AWIN
Matomo Tracking:
Tracking statistics for the optimization of user workflows. No personal data is stored.
Google Analytics:
Google Analytics is used for traffic analysis of the website. Thereby statistics about website activities can be created and read out.
Marketing cookies are used to display advertisements on the website in a targeted and individualized manner across multiple page views and browser sessions.
Google Advertising
Google Ads:
Advertising Targeting
Google AdSense:
The cookie is used by Google AdSense to promote advertising efficiency on the website.
Google conversion tracking:
The Google Conversion Tracking Cookie is used to track conversions on the website effectively. This information is used by the site operator to target Google AdWords campaigns.
Allows Google to collect personal data for online advertising and marketing.
AWIN Tracking:
Affiliate marketing module which requires the use of cookies to confirm affiliate transactions.
Meta Pixel:
Cookie from Meta that is used for website analytics, ad targeting and ad measurement.
Microsoft Ads:
Cookie from Microsoft Ads that is used for website analytics, ad targeting and ad measurement.
Pinterest Ads:
Cookie from Pinterest Ads that is used for website analytics, ad targeting and ad measurement.
TikTok Ads:
Cookie from TikTok Ads that is used for website analytics, ad targeting and ad measurement.
Klaviyo Cookies:
Allow to identify the user when not logged in!
Google Maps/ Places/ Geocoding:
With Google API we check your address and make auto suggest in checkout.
Shopware Analytics is an analytics service for tracking shopping behavior on this webshop, provided by shopware AG (Ebbinghoff 10, 48624 Schöppingen, Germany) in joint responsibility (see also the data protection information). The legal basis for data processing is Art. 6 para. 1 s. 1 lit. a GDPR. If data is stored locally, please refer to our privacy policy for further details on data processing.
The recipient of the data is shopware AG and IT service providers. Technologies used include local storage. The collected data includes customer group, pages visited, click paths, date and time of visit, information about the end device used (resolution, resolution density, operating system), referrer URL, information about the browser used, locale, search queries, time zone. The purpose of data collection is for marketing, analysis, and statistical purposes.
Data processing takes place within the European Union. If you have any questions about data protection, you can contact the data protection officer at legal@shopware.com. Further information can be found at https://www.shopware.com/en/privacy/website.
Stored data:
Shopware Analytics adds the following information to your browser's local storage until consent is revoked: _swa_anonymousId (a unique identifier of the visitor), _swa_userTraits (user traits of the visitor).
To watch videos, you need to accept third-party cookies: