Vixen S 50 mm finder scope holder, short

Thanks to the large aperture of 50 mm, the Vixen 7x50 finder scope immediately reveals many objects that are not visible in smaller viewfinders. This makes it easy to adjust the telescope to the target object. The red illumination of the finder scope can be dimmed to different levels.The eyepiece is detachable (31.7 mm diameter) so that a CMOS camera with 31.7 mm diameter (available separately) can be attached and used as an autoguider. The eyepiece unit with crosshairs is also removable in order to use 31.7 mm diameter eyepieces (sold separately) with different focal lengths. This allows the finder scope to be operated with various magnifications.The lens is designed to be compatible with CMOS cameras. The distance between the bottom of the 31.7 mm sleeve on the camera side and the sensor surface should be approximately 17 mm. However, the focus position may vary depending on the camera, so you should adjust the guiding camera for focus before use. The focus of the optics is adjusted by rotating the lens. First, the black lock ring on the main optics must be loosened. Then, the focus can be adjusted by turning the lens mount. Please also read the operating instructions for the viewfinder and the CMOS camera used.If the focus of the viewfinder has been adjusted, the focus position must be readjusted when using the eyepiece unit.FEATURESMagnification: 7xAperture: 50 mmLenses: coatedCrosshairs: illuminated in red, dimmableDimensions: 220 mm × Ø 58 mmWeight: 467 gSCOPE OF DELIVERY7x50 viewfinderEyepiece unit with illuminationCR2032 batteryInstruction manual

​Long bracket for the Vixen 7x50 finder item # 8616.For use on the Vixen finder shoe, used on many telescopesPROPERTIESSize: 50mm × 71mm × 131mmWeight: 170 g / 6.0 ozBuilt-in spring anti-slip mechanismFor Vixen finder holdersWHAT'S INCLUDEDFinder holder with spring

Universal 60mm viewfinder and guide telescope with a focal length of 250mmExcellent 10x60 viewfinder telescope with removable eyepiece unit and crosshairs with adjustable red illumination. The larger aperture and focal length, provide an even brighter field of view and more accurate tracking due to the higher resolution. The precise helical focuser and the 1.25 inch /31.7mm plug-in connection, as well as the T2 camera connection thread (M42x0.75mm), allow the autoguiding required for long time exposure to obtain a point-shaped star image. It can also be used as a mini travel telescope.High quality 10x60 viewfinder telescope with adjustable crosshair illuminationImage sharpness and viewing characteristics lift this viewfinder well above the level of the usual 10x60 viewfinder scopes. The visible image is bright and crisply sharp. Furthermore, this viewfinder has a very large field of view (FOV) of 6.0 degrees. This makes finding and adjusting objects much easier. The existing scale markings (pitch=0.85 degree) on the crosshair are a good reference for estimating distances, and the open centre markings also make it easier to centre objects precisely. All lens surfaces are protected against weathering by multi-coating and guarantee a bright viewfinder image due to the high light transmission values. The adjustable red LED illumination unit is powered by two LR41 coin batteries. The main lens and the crosshairs can be focused independently of each other, giving you perfect focus for your eyes.Compact tracking unit for autoguidingOne of the main applications for this telescope is the so-called autoguiding. Here the usually larger photo-taking optics are actively corrected by a smaller guiding telescope with a second tracking camera. This means that the mechanical fluctuations in the tracking accuracy, which are present in all astronomical telescope mounts, are measured by the tracking camera and compensated accordingly. This is necessary in order to obtain a point-shaped star image on the astrophotos during long time exposures and to avoid unwanted star trails. For this purpose, the guiding telescope is inserted into the existing viewfinder shoe of the photo-taking optics and aligned parallel. If the existing viewfinder shoe is not compatible, a suitable viewfinder shoe is also included. With the 1.25 inch / 31,7mm plug connection at the rear end or via T2 thread connection (M42x0,75mm), a tracking camera can be mounted afterwards. This is held securely by a brass ring clamp and 3 clamping screws. Please note the required back focus for your tracking camera. The focal plane (backfocus) is approx. 22mm behind the T2 thread. The sensitive focusing on the guiding star is done by a large knurled wheel of the mechanically precise manufactured helical focuser. For easy reproduction of the point of focus, this has a white millimetre scale from 0 to 28mm, which is attached by laser engraving. After the tracking camera has been connected directly or via computer to the telescope mount and the necessary basic settings have been made, the first astrophotos with long time exposure can be taken.Use as mini travel telescopeThis viewfinder and guide telescope can also be used quite simply as a mini travel telescope. With the optional eyepieces, a magnification of 9x to 50x can be achieved. Nearly all eyepieces with a focal length of 5 to 26mm and 1.25 inch/31.7mm plug connection are suitable. Especially recommended are the EXPLORE SCIENTIFIC eyepieces of the 52 degree (Art. 02195xx) and 62 degree (02196xx) LER series. Note: Only straight view use is possible.Metal viewfinder holder and viewfinder shoeThe mount of this viewfinder and guide telescope is completely made of aluminium and is a stable base. The viewfinder mount is suitable for many common types of telescopes, such as EXPLORE SCIENTIFIC, BRESSER MESSIER etc. If the existing viewfinder shoe is not compatible, a matching viewfinder shoe is also included. This can be attached to the telescopic tube by means of four M5 screws. The bore distances of the viewfinder shoe are 31.7mm on the longitudinal and transverse axis. The six large adjustment screws with non-slip knurling make it easy to align the viewfinder, even with clammy fingers. All adjusting and clamping screws have plastic tips that effectively prevent the viewfinder housing and viewfinder mount from being scratched.FEATURESExcellent 10x60 viewfinder and guiding telescopeCan also be used as mini travel telescopePerfect image sharpness and good viewing comfortFMC Multi-coated lens surfacesLens focal length: 250mmMax. possible camera weight: 550gRemovable eyepiece/cross hair unitCamera connection via 1.25 inch / 31.7mm plug connection or T2 threadT2 thread: M42 x 0,75mmPrecise helical focuser for focusing the visible imageFocuser travel range: 28mmClose focus distance: 3 mLaser engraved millimetre scale from 0 to 28mm on the focuserFocal plane (backfocus) is approx. 22mm behind the T2 threadSeparate focusing of the crosshair at the eyepieceVery large field of view FOV of 6.0 degreesWith adjustable red cross-hair iillumination Scale markings crosshair with 0,85 degree graduationPower supply of illumination unit: coin battery type LR41 (2pcs)Brass ring clamp and 3 clamping screws on the 1.25 inch plug connectionWith optional eyepieces magnifications from 9x to 50x can be achievedSuitable are almost all eyepieces with 1.25 inch/31,7mm shaftMounting of the viewfinder telescope is completely made of aluminiumViewfinder mount with 6 large adjustment screws with knurled head for easy gripFinder shoe suitable for EXPLORE SCIENTIFIC, BRESSER MESSIER etc.Additionally a suitable viewfinder shoe is includedBore distances of the viewfinder shoe are 31.7mm on the longitudinal and transverse axisAdjusting and clamping screws have plastic tipsWHAT'S INCLUDED10x60 viewfinder/guiding telescopeEyepiece unit with crosshairCrosshair illumination unit incl. batteriesViewfinder holder with viewfinder shoeInstruction manual

​Vixen finder shoe for attaching a Vixen-profile finder bracket to your telescope (also works with many other finder brackets).PROPERTIESVixen standard connectionFixing with two screwsWHAT'S INCLUDEDVixen finder shoeFastening screws

NEW – now including a high-quality aperture Solar-filter for safe observation of sunspots, eclipses and planet transits. Great telescope for night and solar observation.Excellent for entering into the hobby of astronomy: 90 mm aperture delivers 200 times more light than the naked eye! Observe craters, valleys and rims on the moon from nearly 400,000 km away just as you would look out of the window of a spaceship! The BRESSER MESSIER AR-90s does not only provide highly detailed views of the moon: Gaze at the division of the rings of Saturn millions of kilometers away or explore the Great Red Spot of Jupiter, a giant tornado in Jupiter's atmosphere. Watch the seasons on Mars and find the sickle of Venus.Richfield telescope with a short focal length of 500 mm. Suitable for traveling and to observe large open star clusters and the Milky Way. The MESSIER AR-90s gives you images that are many times brighter than the instrument Galileo Galilei was using for his famous explorations almost 400 years ago. This telescope is an optical tube without mount and tripod. CHARACTERISTICS Optical design: refractor telescopeLens diameter: 90 mm / focal length: 500 mm / F/5.5Maximum recommended magnification: 180xTelescope for night and solar observation 6x30 viewfinder with crosshair eyepiece Optimised finder mount for comfortable viewing 31.7 mm (1.25'') zenith mirror Smartphone adapter for celestial navigation includedSCOPE OF DELIVERY Optical tube 26mm Super Plössl eyepiece (31.7 mm / 1.25") 31.7 mm (1.25") zenith mirror 6x30 optical viewfinder Rotatable star map Aperture solar filter Smartphone adapter for celestial navigation Astronomy PC software Stellarium (via download)

Sturdy case for AP, AP-SM and APZ mounts and individual accessory modules.The outer side is equipped with a reflector strip to improve visibility in the dark.The inside of the case features elastic straps for securing accessories.FEATURES Tailor-made case for AP mountsElastic straps inside case for securing accessoriesSeparate compartments keep the mount separate from the accessoriesThe outer side is equipped with a reflector strip to improve visibility in the darkDELIVERY CONTENTAP carry case

Vixen has developed a new generation of SX mounts for demanding observers and astrophotographers. The SX2WL mount is simply operated via a Wifi module with a smartphone or tablet. By controlling the mount with your smartphone using the free STAR BOOK Wireless app, you can easily use sky navigation functions such as automatic GoTo panning of celestial objects via your smartphone or tablet. By eliminating the power consumption of the conventional LCD (STAR BOOK TEN), the power consumption on the mount is reduced by up to 20%, thus enabling longer astronomical observation and astrophotography. When the desired celestial object is selected from a list, it is automatically panned into the telescope's field of view and tracking begins.An existing STAR BOOK TEN controller can also be used on this mount without any problems. Equipped with the same precision stepper motors as the top model, the AXD mount, the SXD2WL brings a new standard of performance and precision to the Vixen mount family. With a photographic load capacity of 12 kg, the axis cross of the mount weighs just 7.0 kg (15.4 lbs) making it ideal for mobile observations.In addition, the motors mounted in the lower part of the mount also serve as a counterweight, so the mount requires fewer weights for balancing. The SX2 mount in detail Precision stepper motors and micro-step motion control systemAt the heart of the SXD2 are the precision stepper motors, which offer better performance and response than previous models. The micro-step motion control system offers powerful and yet very smooth drive characteristics, which are given both in fine movements and in fast pans. Built-in bearings The bearings of the RA and DEC axes and the worm shafts have been significantly improved to reduce the load on the motors. As a result, the motors move much more smoothly than in previous models. High-precision worm gearsHigh-precision processing technologies eliminate worm gear errors. The edges of the two worms and worm wheels are particularly smooth, enabling very precise tracking. Declination axis as counterweightThe solid motor units are installed in the lower part of the declination axis so that the center of gravity of the SXD2 is below the intersection point of the RA and DEC axes. This means you need fewer additional counterweights. Latitude setting The latitude is adjustable between 0 and 70 degrees (divided into 3 zones and adjustable +/- 15 degrees per zone, for high, medium and low latitudes); latitude scale in 2-degree increments; fine adjustment with a tangent screw head, approx. 0.8 degrees per turn. The wireless module in detail The Vixen Wifi adapter for EQ mounts allows you to control your Vixen mount via a smartphone or tablet. With the smartphone app STAR BOOK Wireless (free of charge) you can navigate the sky without any cables. The app turns your smartphone or tablet into a control unit for the equatorial mount in no time at all. The response delay of the mount, which is considered the biggest disadvantage of wireless connections, has been reduced to a level comparable to wired connections. Reduced power consumption compared to conventional controllers with LCD monitor The power consumption of the mount is reduced by up to 20%, allowing longer observations than with conventional wired controllers such as the STAR BOOK TEN. Operation similar to the STAR BOOK TEN controllerThe STAR BOOK Wireless app has a similar structure to the STAR BOOK TEN controller. Depending on the star map setting, it contains up to 259,000 celestial objects. Tap on a celestial object in the object list and start the GoTo. The mount will now automatically move to this target and bring it into the telescope's field of view. All the popular features of the STAR BOOK TEN are retained. Convenient operation When looking through the telescope operate the mount by swiping on the app's star chart. As there are no buttons, simply slide your finger over the star chart to operate the mount conveniently. Extensive astronomical data included In addition to data on easily observable celestial bodies such as Messier objects, NGC objects and IC objects, this also includes the sun, moon, planets, comets and dwarf planets. High-precision alignment By aligning the mount to one or two stars, you can already achieve fairly precise positioning. By aligning the mount to three or more stars, you can achieve high-precision alignment of the mount for high magnifications. The objects are then approached precisely and centrally in your telescope's field of view. The alignment information is saved and can be retained even when the device is switched off. By leaving the telescope in its current state after completing an observation without moving it, you can start the automatic installation with the same settings for the next observation.  Individual setting options As with the STAR BOOK TEN control unit, the app offers various individual settings, such as gear backlash compensation, night mode in red, autoguider and variable GoTo speed and LED brightness. You can also set the timing of the reversal of the objective tube (meridian flip) as desired. Even if the object moves to the south during tracking, you can prevent the telescope tube from reversing. Important note: Cannot be used on old SX mounts with the old blue Star Book! Technical information about the Wifi module: CPU with 32-bit CISC processor 120 MHz The unit is connected to the mount via a D-SUB 9PIN connector as with the STAR BOOK TEN. It has a 6-pin 6-wire modular plug for external autoguider operation. Supported operating systems are Android 6 or higher, iOS 9.0 or higher, WLAN standard: IEEE 802.11b/g/n. FEATURESRA sprocket: 180 teeth DEC sprocket: 180 teeth Shaft material and diameter: Carbon steel / Decl. 35 mm, RA 40 mm thickness  Fine height adjustment: 0° to 70°, (fine adjustment +/- 15°, height) Backsight rod: 20 mm diameter Azimuth adjustment: worm fine adjustment Power supply: DC12 V; 0.4~1.7 A Maximum load: 12 kg, photographic, without counterweight Counterweight: 1x 1.9 kg  Tripod connection: 45 mm spigot Dimensions: 36 cm (H) x 12 cm (W) x 36 cm (L), weight: 7.0 kg (15.4 lbs), without counterweight 32-bit CISC processor 120 MHz Operating system: Android 6 or higher, iOS 9.0 or higher Connection: D-SUB 9PIN connector Autoguider input: ST4 Power consumption SX2WL+Wireless unit: DC12V / 0.3-2.0 A (load 8 kg), 0.4-2.2 A (load 12 kg) SCOPE OF DELIVERYSX2WL EQ mount Wireless unit Counterweight: 1.9 kg (1pc) Mounting tools Cigarette lighter cable