Vixen SD115SII Telescope OTA

The Wide Photo Adapter 60DX connects your Nikon DSLR camera to your telescope via a 60 mm thread. Thanks to the use of new materials and an improved design, Vixen was able to significantly improve the precision and load capacity compared with conventional adapters. The adapter's large interior diameter prevents shadows at the edges of the image when using a full-frame DSLR camera.FEATURESIncreased material strength for additional stability6 screws hold the camera in position (compared with 4 on most conventional adapters)Screw tips with Delrin inserts prevents the camera from tilting and minimizes distortion.Large interior diameter prevents shadowingBlack interior prevents scattered lightCompatible with 60 mm accessories when the camera adapter is removed2 screw sets (L and S) prevent scratches on the camera housing2 screw sets for adjusting the rotation resistanceDELIVERY CONTENTVixen Wide Photo Adapter 60DX for Nikon cameras2 screw sets (L and S)

​This Vixen focal adapter connects your DSLR or other camera to your telescope with a 60 mm thread.The large interior diameter of the adapter prevents vignetting at the edges of full-frame camera sensors.The focal adapter can be rotated so that the image field can be perfectly framed.This rotational adjustment is facilitated via 3 locking screws, ensuring a firm lock.Note: Vixen T2 ring is also required for your brand of camera.In this case, the inner ring of the T2 adapter is removed and clamped in place with three small grub screws.PROPERTIESConnects your DSLR camera to your telescopePrevents shadowingDimensions: 72 mm x 20 mmWeight: 55 gWHAT'S INCLUDEDFocal adapter universal 60 mmAssembly tool

High-performance flattener and reducer set connection rings for Vixen telescopes SD81S, SD103S and SD115S, as well as the ED predecessor series. High-performance flattener and reducer set The kit consists of a high-performance flattener, a reducer for reducing the focal length, and connection rings (distance ring SD81, EX Tube 66), which were developed for prime-focus astrophotography with the SD81S, SD103S and SD115S telescopes. The flattener and the 0.79x reducer deliver a significant increase in telescope performance and image quality. You obtain a flat and sharp image until the edges, including with a full-frame DSLR camera. Ultra-sharp image over the entire field of view of the DSLR full-frame sensor The SD flattener improves the image quality to the edge of the field of view without changing the original focal length of the telescope. The field of view of the DSLR camera with a full-frame sensor is fully illuminated (44 mm), ensuring that stars appear sharp until the edges of the image. When used in conjunction with the Reducer HD, the focal length is reduced by a factor of 0.79 (f/7.7→6.1) whilst maintaining the 44 mm illumination. High-contrast AS coating The anti-reflex AS coating, which is also used on our high-end VSD 100 f/3.8 astrograph, delivers a high light transmission of 99.9% per lens surface. Loss of light, ghosting and scattered light images are virtually eliminated thanks to the completely matte interior coating. FEATURES Reduces the focal length by a factor of 0.79 Designed for full-frame cameras High-contrast AS coating Ultra-sharp image over the entire field of view Designed for full-frame DSLR cameras Illumination: 44 mm Correct distance to chip: 63.5 mm Designed for the SD81S, SD103S and SD115S Also suitable for the ED81S, ED103S and ED 115S DELIVERY CONTENT SD Flattener HD Reducer HD Adapter ring for SD81 66 mm EX extension tube Dust caps

T2 rings are used as a connecting piece between the camera adapter and the camera. Please note that each camera type requires a different T-ring.FEATUREST2 adapter ring for Nikon camerasAdapts the camera to telescopes and microscopesWeight: 22 gPACKAGE CONTENTSVixen T2 ring for Nikon

T-rings are used as a connecting piece between the camera adapter and the camera. Please note that each camera type requires a different T-ring.FEATURESVixen T-ring for Canon EOS camerasConnects a camera adapter to the cameraFor microscopes, telescopes and T2 lensesWeight: 52 gPACKAGE CONTENTSVixen T-ring for Canon EOS

This T2 ring allows you to use your Sony camera on a telescope or microscope with a T2 thread.Depending on the mode, you may require an additional camera adapter.FEATUREST-2 ring for connecting an SLR cameraDesigned for Sony EWeight: 113 gDELIVERY CONTENTT-2 Ring Sony E

Connects a Four Thirds camera to your telescope or microscope.A camera adapter is required for this purposeWeight: 58 gDELIVERY CONTENTVixen T-ring - Four Thirds

T-rings are used as a connecting piece between the camera adapter and the camera. Please note that each camera type requires a different T-ring.FEATURESMicro 4/3 T-ringFor telescopes and microscopesWeight: 110 gPACKAGE CONTENTSMicro 4/3 T-ring

Above-average contrast The Reducer HD features the optical coating that was developed by Vixen for our high-end VSD100F3.8 astrograph. The AS coating provides light transmission of up to 99.9% per lens surface. The special matte surface in the interior also minimizes ghosting, light loss and lens flares. Reducer HD in combination with SD telescopes The Reducer HD can be used on telescopes from the SD series (SD81S, SD103S and SD113S) with the SD Flattener HD Kit (item #37246) . The Reducer HD reduces the focal length by a factor of 0.79x (f/7.7 to f/6.1) and delivers a razor sharp image over the entire 44 mm image sensor surface on DSLR cameras. Reducer HD in combination with AX103S and VC200L telescopes In addition to the SD telescopes, the Reducer SD is also compatible with the AX103S and VC200L telescopes. With these telescopes, the focal length is reduced by a factor of 0.77x.FEATURESUp to 99.9% light transmission per lens surfaceReduces the focal length by a factor of 0.79xAlso suitable for full-frame DSLR camerasFor the ED/SD 81S, 103S, 115SAS coating with light transmission of up to 99.9% DELIVERY CONTENTVixen Reducer HDDust caps

​High quality SD field flattener HD kit for the Vixen ED and SD refractor telescopesWith this image field plane you get razor-sharp star images up to the edge of the field of view.The flattener illuminates a 44 mm image circle and is therefore also suitable for full format cameras.The same anti-reflection AS coating that is also used for Vixen's high-end astrograph VSD 100 f / 3.8 enables a high light transmission of 99.9 percent per lens surface. Loss of light, ghosting and stray light images are almost completely eliminated by the completely matt interior coating.Can be used on the SD81S, SD103S and SD 115S, as well as the predecessor ED seriesAlso requires the Wide Photo Adapter and a T2 ringWeight 218 g

​The Vixen SLV series are the modern take on the classic Vixen Lanthanum eyepieces. These eyepieces were legendary for their generous eye relief and precise nature, making them a firm favourite with planetary, lunar and double star observers. This 10mm is an excellent eyepiece for medium to higher power on most telescopes, an ideal premium replacement for eyepieces supplied with telescopes, especially good for Planetary observers. The SLV Series of Vixen Eyepieces feature a hexagonal shaped eyepiece body, long 20mm eye relief, and twist up click stop eyecup for adjusting to the most comfortable viewing. The SLV eyepieces feature high grade lanthanum glass, and deliver remarkably clear and high contrast star images to the edge of the field of view. The lenses are fully multicoated for high light transmission.Size 31.7mm/1.25"Apparent FOV 50°Eye relief 20mmWeight 168g (5.92oz)

​The Vixen SLV series are the modern take on the classic Vixen Lanthanum eyepieces. These eyepieces were legendary for their generous eye relief and precise nature, making them a firm favourite with planetary, lunar and double star observers. This 12mm is an excellent eyepiece for medium to higher power on most telescopes, an ideal general purpose eyepiece and major improvement over standard eyepieces. The SLV Series of Vixen Eyepieces feature a hexagonal shaped eyepiece body, long 20mm eye relief, and twist up click stop eyecup for adjusting to the most comfortable viewing. The SLV eyepieces feature high grade lanthanum glass, and deliver remarkably clear and high contrast star images to the edge of the viewing circle. The lenses are fully multicoated for high light transmission.Size 31.7mm/1.25"Apparent FOV 50°Eye relief 20mmWeight 168g (5.92oz)

​The Vixen SLV series are the modern take on the classic Vixen Lanthanum eyepieces. These eyepieces were legendary for their generous eye relief and precise nature, making them a firm favourite with planetary, lunar and double star observers. This 15mm SLV is an excellent eyepiece for medium power for most telescopes, an ideal general purpose eyepiece and provides excellent comfort with long eye relief. The SLV Series of Vixen Eyepieces feature a hexagonal shaped eyepiece body, long 20mm eye relief, and twist up click stop eyecup for adjusting to the most comfortable viewing. The SLV eyepieces feature high grade lanthanum glass, and deliver remarkably clear and high contrast star images to the edge of the viewing circle. The lenses are fully multicoated for high light transmission.Size 31.7mm/1.25"Apparent FOV 50°Eye relief 20mmWeight 168g (5.92oz)

The SLV eyepieces with high-quality lanthanum glass provide remarkably clear and high-contrast star images right up to the edge.The lenses are fully multi-coated for high light transmission.Thanks to the large and comfortable eye relief distance of 20 mm , the eye comfort is maintained, even during longer observing sessions.Even those who wear glasses will have the entire field of view is clearly visible.The click stop eyecups can be tuned up or down to the user's preference.PROPERTIESVery high sharpness and contrast across the entire field of viewComfortable eye relief of 20mmalmost no colour defects due to lanthanum glass1.25" 31.7 mm barrel sizeTurn-down eyecup for people who wear glassesWeight: 155 gWHAT'S INCLUDEDVixen SLV 50 ° eyepieceDust caps

The Vixen SLV eyepieces use high-quality lanthanum glass to deliver remarkably clear and high-contrast star images right up to the edge of the field of view.All lenses are fully multi-coated for high light transmission.Twist up eyecups allow the user to set observing height to their own comfortable specification.  20mm eye relief means that even those who have to wear glasses to observe are able to see right to the edge of the field of view.PROPERTIESVery high sharpness and contrast across the entire field of viewComfortable eye relief of 20mmalmost no chromatism visible due to lanthanum glass31.7 mm receptacle connectionEyecup that can be turned down for glasses wearersWeight: 151gWHAT'S INCLUDEDVixen SLV 50 ° eyepieceDust caps

​The Vixen SLV series are the modern take on the classic Vixen Lanthanum eyepieces. These eyepieces were legendary for their generous eye relief and precise nature, making them a firm favourite with planetary, lunar and double star observers. This 4mm is an excellent higher power eyepiece on shorter focal length telescopes, especially good for Lunar viewing - or for those trying to max out their longer focal length scopes for double star work. The SLV Series of Vixen Eyepieces feature a hexagonal shaped eyepiece barrel, long 20mm eye relief, and twist up click stop eyecup for adjusting to the most comfortable viewing. The SLV eyepieces feature high grade lanthanum glass, and deliver remarkably clear and high contrast star images to the edge of the viewing circle. The lenses are fully multicoated for high light transmission.Size 31.7mm/1.25"Apparent FOV 50°Eye relief 20mmWeight 168g (5.92oz)

Vixen 60DX Focal adaptor for Canon EOS Cameras This Vixen 60DX is a photographic adaptor for Canon EOS cameras, for use with telescopes with a 60 mm focuser drawtube connection thread. A redesign by Vixen uses new tougher materials for a more solid connection and also offers an accurate, well-machined camera rotator ring, in order to help frame your images perfectly. Camera-Adaptor for Canon EOS with 60mm Focuser connection thread Large inner diameter for full-format cameras, helping to minimise vignetting 6 locking 60° spaced bolts to hold the camera’s rotation in position Dimensions: 81mm x 30 mm / weight: 190g The option of using 6 long or 6 short fixing screws for the rotator The Vixen 60DA Focal adaptor connects your Canon EOS DSLR Camera to a telescope with an appropriate 60 mm Focuser Drawtube Thread. Thanks to the use of new materials and an improved design Vixen was able to considerably uprate both precision and durability, when compared to conventional rotational camera adaptors. Two sets of rotational locking bolts (Long and Short) are supplied. The longer ones are knurled and easy to turn by hand. The shorter options help to prevent marring of the camera casing, when using certain designs of camera and are also much less easy to turn by hand, increasing security if you need the camera locked in a particular rotational position for longer periods. The large inner dimension of this adaptor prevents vignetting at the edges of the image when using full frame DSLR cameras. Canon EOS-Bayonet fastener made of hardwearing brass, for years of hassle-free use. Increased material quality over conventional adapters provides more stability in use. 6 fixing bolts hold the camera in rotational position for increased sturdiness (standard rotators often only use 4, or less). FEATURES Screw tips with Delrin-tips prevent tilting of the camera and subsequent image distortion. Large inner diameter prevents vignetting. Inner blackening suppresses scattered light. Compatible with 60 mm accessories, when the camera adaptor is taken off. Two rotational bolt sets (Long and Short) are supplied. SCOPE OF DELIVERY 60DA Focal adaptor 6 long and 6 short fixing screws

Safe and convenient bag to transport your OTA or tripod to your observing site. Holds many size tubes. Wrap the optical tube in the protective cloth with Velcro tape and secure it to the wall inside the carrying bag. Includes 2 accessory pouches to store a finder scope and flip mirror. Reflective tape on the carry strap increases visibility at a dark site.Suggested tubes and tripods: A80M ; A80Mf ; A70Lf ; ED103S; AX103S ; SXGHAL130 and SXG-AL130 TripodFEATUREScarry bag for tubes & tripod maximum optical tube size: 850x125mm (L&W)reflective tape on handles prevent lossSCOPE OF DELIVERY1x Vixen Carry Bag2x accessory pouches

​The 1: 7 reduction enables very fine focusing of targets.An indispensable accessory, especially in astrophotography.The reduction can be retrofitted on the following telescopes:A80M, A105M, NA140SSf, ED81S, ED103S, ED115S, AX103S, VC200L, VMC200L and R200SSCannot be used on old devices from the 90s with plastic focusing knobs - in these cases, it is also necessary to swap the focus spindle (please contact us for details).PROPERTIESAllows very fine focusingIndispensable in astrophotographyCan be retrofitted to many Vixen telescopesReduced to 7:1Weight: 170 gWHAT'S INCLUDEDDual Speed KnobAssembly tool

The Vixen dew cap heater prevents your optics from fogging up due to dew.A must-have accessory for cold and damp nights.FEATURES Consumption: 16.2 Ohm (12 V, 8.9 W) Dimensions: 655 mm long heater with 2.2 m cable Connection: 2.1 socket with medium-negative polarity Weight: 120 g DELIVERY CONTENT Battery box Vixen dew cap heater

Vixen has developed a new generation of SX mounts for demanding observers and astrophotographers. The SXD2WL mount is simply operated via a Wifi module with a smartphone or tablet. By controlling the mount with your smartphone using the free STAR BOOK Wireless app, you can easily use sky navigation functions such as automatic GoTo panning of celestial objects via your smartphone or tablet. By eliminating the power consumption of the conventional LCD (STAR BOOK TEN), the power consumption on the mount is reduced by up to 20%, thus enabling longer astronomical observation and astrophotography. When the desired celestial object is selected from a list, it is automatically panned into the telescope's field of view and tracking begins. An existing STAR BOOK TEN controller can also be used on this mount without any problems. Equipped with the same precision stepper motors as the top model, the AXD mount, the SXD2WL brings a new standard of performance and precision to the Vixen mount family. With a photographic load capacity of 15 kg, the axis cross of the mount weighs just 9.2 kg making it ideal for mobile observations. In addition, the motors mounted in the lower part of the mount also serve as a counterweight, so the mount requires fewer weights for balancing. The SXD2 mount in detail Precision stepper motors and micro-step motion control system At the heart of the SXD2 are the precision stepper motors, which offer better performance and response than previous models. The micro-step motion control system offers powerful and yet very smooth drive characteristics, which are given both in fine movements and in fast pans. Built-in bearings The bearings of the RA and DEC axes and the worm shafts have been significantly improved to reduce the load on the motors. As a result, the motors move much more smoothly than in previous models. High-precision worm gears High-precision processing technologies eliminate worm gear errors. The edges of the two worms and worm wheels are particularly smooth, enabling very precise tracking. Declination axis as counterweight The solid motor units are installed in the lower part of the declination axis so that the center of gravity of the SXD2 is below the intersection point of the RA and DEC axes. This means you need fewer additional counterweights. Latitude setting The latitude is adjustable between 0 and 70 degrees (divided into 3 zones and adjustable +/- 15 degrees per zone, for high, medium and low latitudes); latitude scale in 2-degree increments; fine adjustment with a tangent screw head, approx. 0.8 degrees per turn. Built-in PFL-II polar finder with illumination The built-in 5x20mm polar finder with 10° field of view has a 3-star alignment system. This eliminates the inconvenience of setting the date and original time. The illuminated reticle with variable brightness and automatic switch-off is adjustable in 8 levels and illuminated in red. The adjustment accuracy is 3 arc minutes. The wireless module in detail The Vixen Wifi adapter for EQ mounts allows you to control your Vixen mount via a smartphone or tablet. With the smartphone app STAR BOOK Wireless (free of charge) you can navigate the sky without any cables. The app turns your smartphone or tablet into a control unit for the equatorial mount in no time at all. The response delay of the mount, which is considered the biggest disadvantage of wireless connections, has been reduced to a level comparable to wired connections. Reduced power consumption compared to conventional controllers with LCD monitor The power consumption of the mount is reduced by up to 20%, allowing longer observations than with conventional wired controllers such as the STAR BOOK TEN. Operation similar to the STAR BOOK TEN controller. The STAR BOOK Wireless app has a similar structure to the STAR BOOK TEN controller. Depending on the star map setting, it contains up to 259,000 celestial objects. Tap on a celestial object in the object list and start the GoTo. The mount will now automatically move to this target and bring it into the telescope's field of view. All the popular features of the STAR BOOK TEN are retained Convenient operation When looking through the telescope operate the mount by swiping on the app's star chart. As there are no buttons, simply slide your finger over the star chart to operate the mount conveniently. Extensive astronomical data included In addition to data on easily observable celestial bodies such as Messier objects, NGC objects and IC objects, this also includes the sun, moon, planets, comets and dwarf planets. High-precision alignment By aligning the mount to one or two stars, you can already achieve fairly precise positioning. By aligning the mount to three or more stars, you can achieve high-precision alignment of the mount for high magnifications. The objects are then approached precisely and centrally in your telescope's field of view. The alignment information is saved and can be retained even when the device is switched off. By leaving the telescope in its current state after completing an observation without moving it, you can start the automatic installation with the same settings for the next observation.  Individual setting options As with the STAR BOOK TEN control unit, the app offers various individual settings, such as gear backlash compensation, night mode in red, autoguider and variable GoTo speed and LED brightness. You can also set the timing of the reversal of the objective tube (meridian flip) as desired. Even if the object moves to the south during tracking, you can prevent the telescope tube from reversing. Important note: Cannot be used on old SX mounts with the old blue Star Book! Technical information about the Wifi module: CPU with 32-bit CISC processor 120 MHz The unit is connected to the mount via a D-SUB 9PIN connector as with the STAR BOOK TEN. It has a 6-pin 6-wire modular plug for external autoguider operation. Supported operating systems are Android 6 or higher, iOS 9.0 or higher, WLAN standard: IEEE 802.11b/g/n. FEATURESRA sprocket: 180 teeth DEC sprocket: 180 teeth Shaft material and diameter: Carbon steel / Decl. 35 mm, RA 40 mm thickness Polar finder scope: 6x20 mm, PFL-II polar finder Fine height adjustment: 0° to 70°, (fine adjustment +/- 15°, height) Backsight rod: 20 mm diameter Azimuth adjustment: worm fine adjustment Power supply: DC12 V; 0.4~1.7 A Maximum load: 15 kg, photographic, without counterweight Counterweight: 1x 1.9 kg and 1x 3.7 kg Tripod connection: 45 mm spigot Dimensions: 36 cm (H) x 12 cm (W) x 36 cm (L) Weight: 8.8 kg (19.4 lb), without counterweight 32-bit CISC processor 120 MHz Operating system: Android 6 or higher, iOS 9.0 or higher Connection: D-SUB 9PIN connector Autoguider input ST4 Power consumption SXD2WL+Wireless unit: DC12V / 0.3-2.0 A (load 10 kg), 0.4-2.2 A (load 15 kg) SCOPE OF DELIVERYSXD2WL EQ mount Wireless unit 2 counterweights: 1.9 kg and 3.7 kg Mounting tools Pole finder PFL-II Cigarette lighter cable

Vixen has developed a new generation of SX mounts for demanding observers and astrophotographers. The SX2WL mount is simply operated via a Wifi module with a smartphone or tablet. By controlling the mount with your smartphone using the free STAR BOOK Wireless app, you can easily use sky navigation functions such as automatic GoTo panning of celestial objects via your smartphone or tablet. By eliminating the power consumption of the conventional LCD (STAR BOOK TEN), the power consumption on the mount is reduced by up to 20%, thus enabling longer astronomical observation and astrophotography. When the desired celestial object is selected from a list, it is automatically panned into the telescope's field of view and tracking begins.An existing STAR BOOK TEN controller can also be used on this mount without any problems. Equipped with the same precision stepper motors as the top model, the AXD mount, the SXD2WL brings a new standard of performance and precision to the Vixen mount family. With a photographic load capacity of 12 kg, the axis cross of the mount weighs just 7.0 kg (15.4 lbs) making it ideal for mobile observations.In addition, the motors mounted in the lower part of the mount also serve as a counterweight, so the mount requires fewer weights for balancing. The SX2 mount in detail Precision stepper motors and micro-step motion control systemAt the heart of the SXD2 are the precision stepper motors, which offer better performance and response than previous models. The micro-step motion control system offers powerful and yet very smooth drive characteristics, which are given both in fine movements and in fast pans. Built-in bearings The bearings of the RA and DEC axes and the worm shafts have been significantly improved to reduce the load on the motors. As a result, the motors move much more smoothly than in previous models. High-precision worm gearsHigh-precision processing technologies eliminate worm gear errors. The edges of the two worms and worm wheels are particularly smooth, enabling very precise tracking. Declination axis as counterweightThe solid motor units are installed in the lower part of the declination axis so that the center of gravity of the SXD2 is below the intersection point of the RA and DEC axes. This means you need fewer additional counterweights. Latitude setting The latitude is adjustable between 0 and 70 degrees (divided into 3 zones and adjustable +/- 15 degrees per zone, for high, medium and low latitudes); latitude scale in 2-degree increments; fine adjustment with a tangent screw head, approx. 0.8 degrees per turn. The wireless module in detail The Vixen Wifi adapter for EQ mounts allows you to control your Vixen mount via a smartphone or tablet. With the smartphone app STAR BOOK Wireless (free of charge) you can navigate the sky without any cables. The app turns your smartphone or tablet into a control unit for the equatorial mount in no time at all. The response delay of the mount, which is considered the biggest disadvantage of wireless connections, has been reduced to a level comparable to wired connections. Reduced power consumption compared to conventional controllers with LCD monitor The power consumption of the mount is reduced by up to 20%, allowing longer observations than with conventional wired controllers such as the STAR BOOK TEN. Operation similar to the STAR BOOK TEN controllerThe STAR BOOK Wireless app has a similar structure to the STAR BOOK TEN controller. Depending on the star map setting, it contains up to 259,000 celestial objects. Tap on a celestial object in the object list and start the GoTo. The mount will now automatically move to this target and bring it into the telescope's field of view. All the popular features of the STAR BOOK TEN are retained. Convenient operation When looking through the telescope operate the mount by swiping on the app's star chart. As there are no buttons, simply slide your finger over the star chart to operate the mount conveniently. Extensive astronomical data included In addition to data on easily observable celestial bodies such as Messier objects, NGC objects and IC objects, this also includes the sun, moon, planets, comets and dwarf planets. High-precision alignment By aligning the mount to one or two stars, you can already achieve fairly precise positioning. By aligning the mount to three or more stars, you can achieve high-precision alignment of the mount for high magnifications. The objects are then approached precisely and centrally in your telescope's field of view. The alignment information is saved and can be retained even when the device is switched off. By leaving the telescope in its current state after completing an observation without moving it, you can start the automatic installation with the same settings for the next observation.  Individual setting options As with the STAR BOOK TEN control unit, the app offers various individual settings, such as gear backlash compensation, night mode in red, autoguider and variable GoTo speed and LED brightness. You can also set the timing of the reversal of the objective tube (meridian flip) as desired. Even if the object moves to the south during tracking, you can prevent the telescope tube from reversing. Important note: Cannot be used on old SX mounts with the old blue Star Book! Technical information about the Wifi module: CPU with 32-bit CISC processor 120 MHz The unit is connected to the mount via a D-SUB 9PIN connector as with the STAR BOOK TEN. It has a 6-pin 6-wire modular plug for external autoguider operation. Supported operating systems are Android 6 or higher, iOS 9.0 or higher, WLAN standard: IEEE 802.11b/g/n. FEATURESRA sprocket: 180 teeth DEC sprocket: 180 teeth Shaft material and diameter: Carbon steel / Decl. 35 mm, RA 40 mm thickness  Fine height adjustment: 0° to 70°, (fine adjustment +/- 15°, height) Backsight rod: 20 mm diameter Azimuth adjustment: worm fine adjustment Power supply: DC12 V; 0.4~1.7 A Maximum load: 12 kg, photographic, without counterweight Counterweight: 1x 1.9 kg  Tripod connection: 45 mm spigot Dimensions: 36 cm (H) x 12 cm (W) x 36 cm (L), weight: 7.0 kg (15.4 lbs), without counterweight 32-bit CISC processor 120 MHz Operating system: Android 6 or higher, iOS 9.0 or higher Connection: D-SUB 9PIN connector Autoguider input: ST4 Power consumption SX2WL+Wireless unit: DC12V / 0.3-2.0 A (load 8 kg), 0.4-2.2 A (load 12 kg) SCOPE OF DELIVERYSX2WL EQ mount Wireless unit Counterweight: 1.9 kg (1pc) Mounting tools Cigarette lighter cable

LVW eyepieces combine the comfort of a 20 mm eye distance with a 65° wide angle field of vision. This is thanks to an optical structure of 8 lenses in 5 groups. State-of-the-art coating technology for reflection-reducing multicoating and lanthanum elements to reduce residual aberrations in use.

The perfect LED head torch for nighttime observations! Adjusting your eyes to the dark surroundings is very important when making astronomical observations. In dark areas, it is very difficult to use astronomical equipment without a suitable light. With normal lights, however, the light intensity is more important than protecting your eyes against bright light. Using these lights at night makes your pupils contract, which can make it difficult for your eyes to readjust to the darkness. The SG-L01, our first astronomy LED lamp, featured a built-in red LED that provided a solution to this problem. However, the red light did not offer optimal visibility. On our new astronomy LED light, the SG-L02, the LED lights produce warm light to improve visibility. They also ensure that your eyes stay adapted to the dark. The LEDs do not emit light in the sensitive range of 555 nm. The brightness of the white light can be adjusted between 3 and 42 lumen, while the red light can be adjusted between 0.28 and 7.62 lumen. FEATURES Dimmable red light ensures that your eyes stay adapted to the dark Built-in rechargeable battery, charges via USB Waterproof design LED colour can be switched from red to white 0.28 to 7.62 lumen for red light 3 to 42 lumen for white light Dimensions: 41 mm x 33 mm x 30 mm Weight: 29 g DELIVERY CONTENT SG-L02 head torch Strap (size S) Strap (size L) Pocket clip Cable for charging the battery (USB-A plug to USB Micro-B plug)

This Barlow lens doubles the focal length of your telescope. It allows you to make astronomical observations with a higher magnification than a conventional eyepiece. Thanks to the Barlow lens between the eyepiece, you can obtain a greater magnification whilst maintaining a comfortable interpupillary distance.This Vixen 2x Barlow lens is ideal for observing and photographing lunar landscapes and details on the brighter planets. The Barlow lens also features a T2 connection for photography with DSLR cameras. With T2 extension tubes, it can also be used as a camera projection adapter.With a deflecting prism, the Barlow lens enables you to obtain a magnification factor of 3.3x.FEATURES2x Barlow lenses with T2 thread2-lens optical systemDoubles the magnification factorAlso suitable as a camera adapter31.7 mm sleeveWeight: 80 gDELIVERY CONTENT 2x Barlow lenses Dust caps

This adapter ring enables you to take colour and nebula filters with M48 and M52 thread.The M56 thread of the filter adapter is screwed into the Wide Photo Adapter AD 60DX, for example, and then offers an adaptation to M52 and M48 filter threads for various nebula filters for photography. The adapter has each one 48 mm and 52 mm thread. The adapter ring can be used on the Wide Photo Adapter 60DX, Wide Photo Adapter 60 mm, 60 mm ring with T-thread adapter or the EA60mm up to 50.8mm.The adapter ring can be used on the telescopes A81M, A105M II, SD81S, SD115S, AX103S, FL55SS, VC200L, VMC200L, VMC260Lin combination with the optionally available adapters described above.IMPORTANT NOTE: The Corrector PH, the Extender PH and the Coma Corrector 3 cannot be used with this Adater when used with the R200SS OTA in combination with the EA 60mm to 50.8mm.FEATURESInternal thread M48 (diameter 48 mm, thread pitch = 0.75 mm)Internal thread M52 (diameter 52 mm, thread pitch = 0.75 mm)External thread M56 (diameter 56 mm, thread pitch = 0.75 mm)Applicable adapters: Wide Photo AD 60DX, Wide Photo AD 60 mm, 60 mm ring with T-thread AD, EA60 mm to 50.8 mmDimensions: 56 x 7 mmWeight: 7gMade in JapanSCOPE OF DELIVERYFilter adapter for M48mm and M52mm filter thread

One of the most important obstacles for the exploration of the night sky is the brightening of the night sky by artificial lights, such as streetlights. The night sky is not really dark in the vicinity of towns or cities, which reduces the visibility of objects beyond the solar systems enormously. Depending on the type of the celestial object it is possible to increase the contrast dramatically by blocking the annoying artificial light. The EXPLORE SCIENTIFIC UHC filter uses a characteristic property of the so called emission nebulae. Those objects glow in special colours, their emission lines. Those emission lines are linked to chemical elements - in this case hydrogen at 486nm and 656nm, plus oxygen at 496nm and 501nm. The Explore Scientific UHC nebula filter blocks all other colours (and thereby nearly all of the artificial light) and only the emission line of the hydrogen and oxygen can pass the filter. The result is astonishing: suddenly nebulae are visible at locations that were completely empty without filters. In suburban skies for example the Owl-nebula M97, the Veil-nebula NGC6992 or even the bright Dumbell-nebula M27 are not clearly visible. By using this filter you can see the nebulae and their structures without problems. A must for every visual observer. The EXPLORE SCIENTIFIC nebula filters come with a individual test certificate - your guarantee to receive a premium filter.FEATURESenables the observation of emission nebulaeblocks almost the entire artificial lightonly the two emission lines of hydrogen and oxygen passes the filterWHAT'S INCLUDED1x 1.25" UHC nebula filter

One of the most important obstacles for the exploration of the night sky is the brightening of the night sky by artificial lights, such as streetlights. The night sky is not really dark in the vicinity of towns or cities, which reduces the visibility of objects beyond the solar system enormously. Depending on the type of the celestial object, it is possible to dramatically increase the contrast by blocking annoying artificial light. The EXPLORE SCIENTIFIC UHC filter "zeros in" on the wavelengths of so-called emission nebulae. Those objects glow in special colours - their emission lines. Those emission lines are linked to chemical elements - in this case hydrogen at 486nm and 656nm, plus oxygen at 496nm and 501nm. The EXPLORE SCIENTIFIC UHC nebula filter blocks all other colour wavelengths (and thereby nearly all of artificial light) and only the emission line of the hydrogen and oxygen can pass the filter. The result is astonishing: suddenly nebulae are visible at locations that were completely invisible from, without filters. In suburban skies, for example the Owl-nebula M97, the Veil-nebula NGC 6992 or even the bright Dumbell-nebula M27 are not clearly visible. Using this filter allows you to see nebulae and their structures in much finer detail. A must for every visual observer. The Explore Scientific nebula filters come with a individual test certificate - your guarantee to receive a premium filter.

BRESSER Full HD Deep Sky Camera with autoguider: a great camera for different types of astrophotography and for autoguiding. Not only suitable for planets, but also for deep-sky objects such as galaxies, nebulae and star clusters. Dedicated ToupSky Astro Imaging software supports video preview, video recording, video processing, image capture and processing, dark field correction and raw data output. Easy to use, but with professional results. One of the main features of the new backlit SONY IMX290 CMOS sensor is its high light sensitivity, which makes it possible to detect deep-sky objects without active cooling. SONY has increased the quantum efficiency at 533 nm wavelength up to 77%, which is much better than other CMOS sensors have been able to achieve in the past. Connect this camera to a guidescope and attach the camera's built-in ST-4 port, directly to your telescope's equatorial mount guide port and autoguide - using many popular audioguiding programs (PHD, Guidedog and more). Autoguiding enables you to take accurate pictures with long exposure times of several minutes. Thanks to the extra light-sensitive camera, you now always have a suitable guide star to hand, even using short exposure times. An ST-4 protocol connection cable is also included. Simple automatic tracking at its best. You can use this camera with all guiding telescopes, or off-axis guiders that accept a 1.25 " tube, 1.25" filter thread (M28.5x0.6) or C-mount adapter thread (1 "x1 /32"). IMPORTANT NOTES: This is not a stand-alone guider camera. You always need a Windows 10/11 computer to take pictures and for autoguiding. The autoguider software is not included. You can use PHD2 Guiding, Guidedog, Metaguide, Guidemaster (freeware) or AstroArt, MaxIm DL (paid). DOWNLOAD PHD2-Guiding: https://openphdguiding.org/ DOWNLOAD GuideDog: http://barkosoftware.com/GuideDog/index.html DOWNLOAD latest camera software and drivers: http://www.touptek.com/download/showdownload.php?lang=en&id=2Download INDI Driver: https://github.com/indilib/indi-3rdparty/tree/master/indi-toupbase SPECIFICATIONS Camera type: BRESSER / Touptek GPCMOS02000KPA color Sensor: SONY IMX290 CMOS color, backlit Image and video size: Full HD 1936 x 1096 pixels (video 15 FPS) Native sensor size in pixels: 1936 x 1096 Exposure times: 66µs to 16min Binning: YES, 2x2 Megapixel: 2.1 MP Sensor size in mm: 5.6 x 3.1 Pixel size: 2.9 µm x 2.9 µm Bit depth: 8/12 switchable ST-4 Compatible Autoguider: YES CNC milled housing made of aluminum Protective strap on the camera housing Camera tube diameter: 1.25 "(31.7 mm) Camera connection thread: C-mount + 1.25 "filter thread Computer interface: USB 2.0 C-mount extension tube with 1.25 inch filter thread included No IR cut filter installed Operating system: WINDOWS 10 + 11 ASCOM driver included Field of view for different focal lengths in mm (given in arc minutes): 400mm - 48.2 'x 27.3' 500 mm - 38.6 'x 21.8' 600 mm - 32.1 'x 18.2' 700 mm - 27.5 'x 15.6' 800 mm - 24.1 'x 13.6' 900 mm - 21.4 'x 12.1' 1000 mm - 19.3 'x 10.9' 1250 mm - 15.4 'x 8.7' 1500 mm - 12.9 'x 7.3' 1750 mm - 11.0 'x 6.2' 2000 mm - 9.6 'x 5.5' SCOPE OF DELIEVERY Full HD camera C-mount adapter USB 2.0 PC connection cable with a length of 200cm Interface cable for ST-4 autoguider port with 150cm length Dust cap for camera tube Software CD

The Vixen focal adapter can be used to connect your DSLR camera to your telescope via a 60-mm thread. The large internal diameter of the adapter prevents shadows at the edges of the image when using a full-frame DSLR camera. The focal adapter can also be rotated to rotate the field of view selection. Three locking screws are provided for clamping.Note: Vixen T2 ring also required for your Canon. In this case, the inner ring is removed from the T2 adapter and clamped using three small grub screws.FEATURES60-mm connection thread for OAZWeight: 56 gT-ring for Canon EOS also requiredPACKAGE CONTENTSVixen focal adapter for Canon EOS

The Vixen SX 60 mm to 50.8 mm adapter sleeve can be screwed on to the thread of a 60-mm focuser for connectionto a 50.8-mm (2") sleeveFEATURES Adapts 60-mm focusers for 50.8-mm eyepieces or flip mirrors. Compatibility: All Vixen OTAs with 60-mm connection Length: 10 mmWeight: 65 gPACKAGE CONTENTS60 mm to 50.8 mm adapter sleeve