Light and robust case for SX mounts with storage space for the STAR BOOK ONE control
- Case for the SX mount series (not compatible with the SXP2 mount)
- Made from durable and lightweight Plapearl material
- Lightweight and sturdy housing material (made in Japan)
- Additional storage space for Starbook controller
- Dimensions: 39 cm x 50.5 cm x 22 cm
- Weight: 3.3 kg
Product number:
12056
Former product no.:
X089226
Note: Our item numbers have been updated.
You can continue to search for products using either the previous or the new item number.
EAN:
4955295892266
WEEE-Reg.-Nr.:
DE 34323861
Help & Service for your product
Here you will find quick help, answers to frequently asked questions, and the direct path to support.
Service Portal
Please use our product help search to find answers to your questions. Simply enter the item number or EAN and open the appropriate help page directly.
Service PortalGuides & Tips
Telescopes - Optics and mechanics
The ultimate guide to the ideal microscope for examinations of koi parasites.
Read now
FAQ - Frequently Asked Questions
That is normal. Finder scopes are only used to make objects easy to locate. The image orientation does not matter for observation.
- Alt-azimuth: easy to use, moves horizontally and vertically
- Equatorial: enables precise tracking of objects with only one axis – ideal for high magnifications and astrophotography
- Moon: from 30 mm
- Planets: from 100 mm
- Deep sky: from 150 mm
Product information "Vixen SX carry case"
Case for the SX mount series (except the SXP2 mount).
This case is designed for the SX mount series and accessories (excluding the SXP2).
It contains additional space for counterweights, a Star Book TEN controller, Star Book cable and the power adapter.
The parts are stored in made-to-measure foam inserts.
The case is very robust and protects your mount against impacts and environmental influences.
The case is made from a durable and lightweight material called Plapearl, which is more flexible and significantly lighter than aluminium.
The case weighs approximately 50% less than a conventional SX aluminium case.
Plapearl is a type of plastic made from polyolefins and is manufactured by Kawakami Sangyo in Japan.
Its advantages include a low weight, durability, high flexibility and resistance against dents.
The case provides reliable protection for your equipment.
FEATURES
DELIVERY CONTENT
This case is designed for the SX mount series and accessories (excluding the SXP2).
It contains additional space for counterweights, a Star Book TEN controller, Star Book cable and the power adapter.
The parts are stored in made-to-measure foam inserts.
The case is very robust and protects your mount against impacts and environmental influences.
The case is made from a durable and lightweight material called Plapearl, which is more flexible and significantly lighter than aluminium.
The case weighs approximately 50% less than a conventional SX aluminium case.
Plapearl is a type of plastic made from polyolefins and is manufactured by Kawakami Sangyo in Japan.
Its advantages include a low weight, durability, high flexibility and resistance against dents.
The case provides reliable protection for your equipment.
FEATURES
- Made from special Plapearl material
- Highly robust and lightweight
- For the SX mount series
- Dimensions: 39 cm x 50.5 cm x 22 cm
- Weight: 3.3 kg
DELIVERY CONTENT
- SX carry case
- Foam inserts
- Key for case
| Colour: | silver/white |
|---|---|
| Material: | Aluminium |
| Net weight (without access.) (g): | 3300 |
| Total height (mm): | 505 |
| Total length (mm): | 39 |
| Total width (mm): | 22 |
Product and safety instructions
Manufacturer:
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede
Contact:
www.bresser.de
www.bresser.de
Warning notes
- General safety instructions DANGER Risk of suffocation! Improper use of this product can result in suffocation, especially for children. Therefore, carefully observe the following safety instructions. Keep packaging materials (plastic bags, rubber bands, etc.) away from children! There is a risk of suffocation! Keep cords, ribbons, and similar materials away from children! They could accidentally strangle themselves and suffocate! NOTE Risk of material damage! Improper handling can damage the device and/or accessories. Therefore, only use the device according to the following safety instructions. Do not dismantle the device! In the case of a defect, contact your dealer. They will contact the service center and may send the device in for repair.
- Never look at the sun through an eyepiece/telescope without a certified protection filter. A moon filter can never be used for solar observation. The moon filter is only suitable for moon observation. The solar filter must be mounted in front of the telescope opening, not at the eyepiece. Otherwise, the concentrated light beam through the optics will immediately destroy the filter foil, leading to severe eye damage, including permanent blindness.
- Never leave the optics unattended. Children and inexperienced adults could point the telescope at the sun without proper precautions and lose their eyesight.
- Do not expose the device to high temperatures.
Skip product gallery
Customers also viewed
Vixen Carrying Case for SXP2 Mount
€599.00*
The Vixen carry case is specially designed for secure storage and transport of the SPX2 mount. It also has space for the StarBook TEN controller, the StarBook cable and the AC adapter. The housing is new from a newly developed material called Plapearl, which is highly weather-resistant and lightweight. The special design featuring two plastic plates with vacuum-moulded cylinders reduces the weight by 36% compared with conventional aluminium materials.
FEATURES
Stable case for the SXP2 mount
Material: Special polypropylene and aluminium alloy
Colour: White
Dimensions: 47.5cm x 49cm x 22.5cm
Weight: 4.1 kgDELIVERY CONTENTCarry case for SXP2 mountKey for locking the case
Currently unavailable
EXPLORE SCIENTIFIC Twilight I telescope mount with tripod
€299.00*
The Twilight I is a light-to-medium-duty alt-azimuth mount and tripod designed to quickly and easily accept small to medium sized refractors, such as the AR102 + AR127s or ED102mm + ED127, and of course, the ED80mm. Lightweight, fast Newtonians will also match up nicely with the Explore Scientific Twilight I mount. As long as your telescope does not exceed 18 pounds and has a Vixen-Style Universal Dovetail bar for mounting the telescope to the mount head, you are good to go. The Twilight I alt-azimuth mount head is made of powder-coated aluminum and there are worm gears on both axes. The adjustable angle head can be tilted forward or back at a 45° angle to allow more clearance for your telescope so you can point it straight up for viewing at the zenith. The Allen hex wrench for doing the mount head adjustment can be safely stored at the integrated magnetic holder. Slow-motion control cables are attached on the vertical and horizontal axes, and are easy to turn during the night, even with gloves on, due to the over-sized knurled knobs that are attached to the end of each cable. They can be attached to either side of each axis to accommodate right or left-handed users, or different types of telescopes (e.g. refractors vs. Newtonian reflectors) for ease of adjustment. The stainless steel tripod that comes standard with the Twilight I mount has adjustable legs and a wide foot print of 42 inches, which makes the tripod more stable. A spreader bar locks against the inside of the legs to secure the tripod even further, and keep vibrations to a minimum. SCOPE OF DELIVERTwilight I Telescope MountStainless Steel Field tripod
Available
%
EXPLORE SCIENTIFIC Precision AZ Adjuster for iEXOS-100 Mount
€69.00*
€105.00*
(34.29% saved)
The Azimuth Adjuster Adapter is designed for use on the iEXOS-100 tripod, but requires slightly modification of the tripod base. See the manual for details of the required modification. This device allows iEXOS-100 users to make fine azimuth adjustments for precise polar alignment. Customer comment: I tried it out for the first time last night. It's now even easier to get polar aligned (using Sharpcap).... It's an easy installation with the newly included parts to install the post and the clear instruction manual. Thanks ES! - Jay Sanchez (USA) FEATURES Allows iEXOS-100 users to make fine azimuth adjustments Quick and comfortable adustment for polar alignment Full aluminum design - no plastic Only slightly modification necessary (one hole to be drilled) SCOPE OF DELIEVERY Precision AZ Adjuster Installation manual
Available
