Vixen SXP2-SD103S-S-PFL Telescope Complete Set

SXP2 mount with R200SS reflector telescope. This telescope set has everything you need to observe the night sky.It includes a telescope, a mount with automatic tracking, a tripod and two eyepieces.The SXP2 mount comes with the new STARBOOK TEN control technology and the PFL polar viewfinder, which allows you to configure the mount quickly and easily via reference stars.The R200SS was designed for photography and produces a sharp and high-contrast image with a rapid aperture ratio of f4. Thanks to the fast focal ratio, you can obtain quick and stunning images of galaxies and nebula.The telescope set also offers outstanding visual performance and produces sharp images without chromatic aberration. It also produces impressive images of the moon's craters and Saturn's ring system.The mount can be operated fully automatically and finds celestial objects automatically.The SXP 2 mount in detailStrong mount housingCompared with previous models, the new SXP2 mount features larger bearings in order to increase the accuracy and load capacity.The mounting housing is made from a stronger material than the previous SX mounts.The equatorial head is clamped into a fork in order to increase the stability of the polar alignment wedge.Precise tracking with P-PEC functionThe SXP2 mount comes with the modern STARBOOK TEN control system. This includes a P-PEC function for precise tracking. PEC stands for ''Periodic Error Corrections'' and corrects errors in the mechanics which lead to periodic errors in the gear systems. The P-PEC function, which is based on the PEC function, is designed for the SXP2 equatorial mount. The P-PEC function saves the records of corrections, even after the power supply to the mount has been switched off. It is not necessary to re-enter the data each time, which enables a quicker setup and more precise tracking.The belt drive system minimizes backlash and noiseConventional motor-driven systems on equatorial mounts use gear wheels, which are driven by the motor. However, this design generates backlash under the gear wheels, which can lead to inaccuracies.To avoid these errors, the drive was converted to a belt drive system. This drastically reduces the backlash of the gear unit, as well as the noise generated by the drive system. It also ensures a quicker reaction when corrections are required.16 bearingsThe mechanical parts contain a total of 16 bearings.The SXP2 mount uses a set of tapered roller bearings for the RA axis in order to provide additional stability for more precise tracking.Stable polar alignment wedgeThe SXP2 mount uses the same fork as the heavy AXJ mount. This new construction enables a quick and stable configuration of the latitude setting.Simple and precise polar alignment via reference starThe 6x20 polar finder scope is pre-installed. This allows the user to configure the polar alignment (for both the northern and southern hemispheres). The polar finder scope has a variable illuminated reticle with an automatic power-off function. The brightness can be adjusted in 8 levels so that the user can configure the desired brightness.The polar finder scope can be configured directly via three reference stars and can reach an accuracy of up to 3 arc minutes.Variable mount headThe mount head has a diameter of 35 mm and features 8 threaded holes for M8 screws spaced at 45 degrees. An optional accessory tray can be attached to the mount head directly or in combination with an optional mounting wedge for dovetail plates. The threaded holes on the mounting head can also be used to mount rails from other manufacturers. Modern STAR BOOK TEN controller with high-resolution colour display and built-in star chartThe STAR BOOK TEN controller is a modern control system with a high-resolution colour monitor.The STAR BOOK TEN system contains more than 272,000 celestial objects, including 260,000 stars from the SAO catalogue, 109 Messier objects, 7840 NGC objects and 5380 IC objects, as well the soon, moon and planets. Objects can be accessed by name, and information such as images and data can be defined separately.A combination of innovative, elegant design and user-friendly featuresThe improved design of the stable and rigid mount body, which features precise tracking with a P-PEC function and STAR BOOK TEN control system, offers a highly precise, easy to use mount that is guaranteed to please astrophotographers and observers.Special motor mount for lighter counterweightThe heavy RA and DEC motor units are built into the bottom of the declination axis to ensure that the centre of gravity of the equatorial head is below the RA and DEC axis. This enables the declination body to function as a counterweight. Thanks to the flat mounting head, the mount can be balanced with a significantly lighter counterweight.Retractable counterweight barThe counterweight bar is made from solid stainless steel with a thickness of 20 mm, and enables the use of all counterweights from the SX and GP mount series. The counterweight bar is housed in the declination body.The Vixen R200SS reflector telescope in detailThe R200SS features very fast f4 200 mm optics with a parabolic primary mirror and produces extremely sharp images with no chromatic aberration. A special layer made using state-of-the-art technology provides an optimal surface for observing and photographing deep-sky objects.The large aperture and short size make this device ideal for astrophotography of nebulae, star clusters and comets. The use of an optional coma corrector provides a sharp image until the edges of the field of view. The focuser features a 60 mm thread to enable the use of 2-inch eyepieces with an adapter.Vixen has developed a unique aluminium vacuum evaporation system that produces extreme precision mirror surfaces. The revolutionary Vixen system allows for controlled coating of the primary mirror for greater accuracy. This coating is used on both the VC200L and the R200SS.FEATURES Mirror: 200 mm (8 inches) Focal length: 800 mm f4Resolution and limiting magnitude: 1.01 arc seconds; 13.3 magLight-gathering power: 816 xDimensions and weight: 232 x 600 mm, 6.9 kgAdapter and connections: 31.7 mm sleeve, 60 mm threadDELIVERY CONTENT SXG-HAL130 tripodSXG half-pier2 counterweights (1.9 kg and 3.7 kg)7x50 finder scopeCarrying strapDovetail barDovetail adapterFolding mirrorSLV 20 mm and SLV 5 mm eyepieceSXP2 GoTo mount with Star Book Ten controllerPolar Axis Scope PFL-2

The three-lens design of the EXPLORE SCIENTIFIC ED-Apochromats provides everything an amateur astronomer desires - at a reasonable price. The construction with Hoya FCD-1 ED glass has two air spaces and provides a level of correction so superior to the two-lens constructions, that are common in this price class, that you will see the difference immediately. This excellent optical performance teams up with a high precision mechanics - the result is a telescope on a level that is setting a new standard in it´s price class. Astrophotographers will love this telescope - a optional field flattner is available and makes the telescope perfect even for cameras with a large chip format.These very popular EXPLORE SCIENTIFIC Triplet ED APO Refractors we do offer in 3 different product lines:Essential Line: HOYA FCD-1 Glass lens, AL-Tube, 2.0" Rack&Pinion Focusser with 1:10, 2.0" Star Diagonal 99% Reflectivity (see Part No. 0112084(AL), 0112106(AL), 0112132(AL)), 0112155(CF + 3"FT)) Professional Line: HOYA FCD-100 Glas lens, AL/CF-Tube, 2.5" HEXAFOC Focusser with 1:10, 2.0" Star Diagonal 99% Reflectivity (see Part No. 0112086(AL), 0112108(AL), 0112109(CF), 0112134(AL), 0112135(CF))High-End Line: OHARA FPL-53 Glass lens, Carbon(CF) Tube, 3.0" Feather-Touch Focusser with 1:10, 2.0" Star Diagonal 99% Reflectivity (see Part No. 0112165(CF))FEATURESthree lens air-spaced ED-apochromatHoya FCD01-ED glasspolystrehl of above 0.9weight: 2,6kgbackfocus: 165mm above 2" adaptorSCOPE OF DELIVERYOptics with dovetail plate and finder slot 2" Star Diagonal 99% reflectivityDust caps for front-lens and focuser

SXD2 mount with SD103S telescope These telescope sets are ideal for beginner observers. The sets include a telescope, a mount with automatic tracking, a tripod and eyepieces. Featuring the STARBOOK TEN control system, the telescope locates celestial objects automatically so that you don't need to search for them manually. Even if you're not an expert, you can still give your friends an exciting tour through the night sky! The SXD2 mount comes with the new STARBOOK TEN controller and the PFL polar viewfinder, which allows you to configure the mount quickly and easily via reference stars. The SXD 2 mount in detail With a combination of the best features from the Sphinx series and the all-new STAR BOOK TEN manual controller, Vixen has developed a new generation of SX mounts for demanding observers and astrophotographers. The SXD2 mount comes with the new STAR BOOK TEN controller and can be operated manually or with a computer. Featuring the same precision stepper motors as the top-of-the range AXD mount, the SXD2 sets a new standard for performance in the Vixen mount range. Compared with the SX mounts, the SXD2 has a quieter tracking system, and the increased precision of the motors provides better performance for the long exposure times used in astrophotography. Precision stepper motors and micro-step motion control system The star feature of the SXD2 is the precision stepper motors, which offer better performance and responsiveness than previous models. The micro-step motion control system has powerful yet very quiet drive characteristics that offer both fine control and quick swivel movements. Built-in bearings The bearings of the RA and DEC axles and the worm shafts were significantly improved in order to reduce the load on the motors. The motors are much quieter than those on previous models. Robust RA and DEC axles High-precision and thick steel shafts in RA and DEC axles increase the robustness and stability of the SXD2 mount. High-precision worm gears High-precision processing technologies were used to rectify problems with the worm gear. The edges of both worms and worm gears are particularly smooth, which enables them to deliver very high precision. Declination axis functions as counterweight The sturdy motor units are located in the lower section of the declination axis to ensure that the SDX2's centre of gravity is below the intersection of the RA and DEC axis. As a result, fewer additional counterweights are required. The SD103S in detail A new apochromatic refractor with high-performance Super ED glass (=SD). The FPL53 glass reproduces an extremely clear and sharp image by eliminating residual chromatic aberration. Another advantage of these SD refractors is their short length and lightweight design. The SD glass is designed to focus all beams of violet, red, blue, yellow and green light exactly onto the same level. The special lens material reduces chromatic aberration across all colours. Together with the new optional SD Reducer HD Kit or SD Flattener HD, these refractors provide illumination with a 44 mm image circle for full-frame SLR cameras. The large focuser allows you to attach heavy cameras without the telescope tilting. The telescope also comes with a folding mirror for making observations in unfavourable conditions, as well as a T2 thread for connecting a DSLR camera. FEATURES Complete telescope set with numerous accessories SXD2 mount with 15 kg load capacity (photographic) Modern STARBOOK TEN control with 272,000 objects Automatic tracking with GoTo function 103 mm aperture and 795 mm focal length SD lenses for high contrast and sharpness Limiting magnitude: 11.8 Resolution: 1.13 Premium SLV eyepieces Total weight: 27.9 kg SCOPE OF DELIVERY SXG-HAL130 tripod SXG half-pier 2 counterweights (1.9 kg and 3.7 kg) 7x50 finder scope Polar Axis Scope Folding mirror Cigarette lighter cable Carry handle SLV 20 mm and SLV 5 mm eyepiece SXD2 mount with control SD 103S telescope

AP-series telescope set with 80 mm refractor and high-performance SD glass for the lens. The set comes with an exclusive travel bag for transporting and storing the optical lens barrel. STYLISH DESIGNThe AP mount features an ultra-smooth finish without any projecting parts.Simply place your telescope on the mount and move it to the desired celestial object without having to loosen any clamps!QUICK POLAR ALIGNMENTThe slip clutches allow you to adjust the telescope to your target object easily - no more searching for adjustment clamps in the dark! An optional polar meter is available, which enables you to locate the celestial pole when it is hidden by trees or buildings.OPTIONAL POLAR FINDER SCOPEThe innovative polar finder scope provides a new way to polar align your telescope. Simply align the stars in the crosshair reticle with the same stars in the night sky. Polar alignment is achieved using 3 reference stars. The polar finder is illuminated to facilitate orientation and switches off automatically after 3 minutes to save battery power.STAR BOOK ONE CONTROLLERThe STAR BOOK ONE is a multifunctional and intuitive controller that tracks in the RA and DC axis with a range of different speeds. The tracking options are designed for time lapse cameras at a wide range of speeds, including sidereal, lunar and solar rates. The controller also offers many useful functions such as backlash compensation, autoguider port, PEC and a built-in red LED light. The STAR BOOK ONE controller is designed for the AP-SM mount and is an integral part of the RA motor module.APP-TL130 tripod The compact APP-TL130 tripod is adjustable between 60 cm and 130 cm and combines the portability of a camera tripod with the strength of an astronomical telescope tripod. The tripod can be switched between rubber and metal spikes to prevent floor damage in indoor spaces.FEATURESIdeal for air travelCollapsible travel mount with RA motor and controlLightweight and portableUpgradable DC motorHigh-quality ED refractor with 80 mm lenses and 600 mm apertureResolution: 1.43Limiting magnitude: 11.3Light-gathering power: 134xVery high sharpness and contrastTotal weight: 14.6 kgDELIVERY CONTENTED80Sf ED refractor telescopeAP-SM mount with control/RA motorAPP TL 130 tripodFolding mirror9x50 mm finder scopeTube clampsDovetail adapter2 eyepieces: NPL20, NPL6Aluminium case

NEW - now including a high-quality aperture Solar-filter for safe observation of sunspots, eclipses and planet transits. Great telescope for night and solar observation.The MESSIER MCX-127 telescope is your own small observatory with GoTo computer control. Easy to operate, easy to transport and universally use.  Observe moon, planets, galaxies and nebulae through the proven BRESSER Maksutov-Cassegrain optics. The main features of this optics are a sharp and high-contrast image, as well as the very compact and sealed tube design. An all-round telescope for all fast spotting lovers ! Goto systems play an important role in the world of amateur astronomy as they ensure that users spend less time searching for celestrial objects and more time observing and photographing. The BRESSER Messier GoTo control, allows you to operate your telescope with the included computer handbox. After entering the basic data such as date, time and location, at least 1 known reference star is approached and confirmed. Afterwards, you can choose your favourite objects from the integrated database and let the MCX telescope move to and track them automatically. It couldn't be simpler! One of the outstanding features of the MCX telescopes is the very solid fork mount made of die-cast aluminium and the universal field tripod made of stainless steel. Both guarantee a safe stand and as little unwanted vibrations as possible during observation. In addition, the drives in both axes are equipped with precision ball bearings and precision worm gears made of steel and brass. This ensures smooth and quiet star tracking. Adapt your smartphone camera directly behind the SPL26mm eyepiece using the included smartphone holder or mount your camera on the M35 threaded connector and take astro photos of the moon and planets. The 90° flip mirror at the back of the telescope allows a quick and comfortable change between using an eyepiece or a camera.  You'll be amazed at what this MCX telescope can do with little effort.When it comes to tracking the stars with a telescope or camera, there is nothing comparable to the precision of a German equatorial or parallactic mount. It is important to follow the objects as precise as possible when they rise in the east and sink in the west. For observers it is very easy to keep their celestial object in the middle of the eyepiece for a longer time with a German equatorial/parallactic mount. This possibility of setup  (EQ mode) is already included in your new MCX telescope. The so-called polar wedge on the tripod head can be tilted accordingly and adjusted to the latitude of your location. You can therefore quickly switch between these two types of installation (AZ/EQ) - without having to buy extra accessories! Also a fast use of the MCX telescope without tripod only as a table device is possible !  This telescope combines so many good characteristics that the purchase is really worthwhile. You will be inspired! FEATURES Universal and compact entry-level telescope with GoTo function Easy operation and transport High-resolution and proven BRESSER Maksutov-Cassegrain optics Aperture diameter: 127mm , focal length 1900mm FMC fully coated optics for a brighter image Solid die-cast aluminium fork mounting with drive motors in both axes Proven Goto control for navigation in the starry sky Computer hand box with very large and illuminated display Multilingual menu navigation in DE, GB, FR, ES, IT Sturdy stainless steel tripod with polar wedge (AZ+EQ mode possible) Can also be used without a tripod as a table-top unit Flip mirror 90° - quick change between eyepiece and camera possible Battery compartment integrated in the base for 8 x AA batteries (Batt. not included) Integrated circular bubble for easy leveling Enlarged primary mirror (138mm) for a brighter image Precise worm gears made of steel/brass in both axes Manual gear clamps in both axes Smartphone holder included for photography through the telescope LED red dot finder with CR-2032 battery included BRESSER Super Plössl eyepiece 26mm (1.25") included (73x) Eyepiece shaft diameter: 31.7mm (1.25") Camera connection thread: M35 x 1 mm External connection for 12 Volt power supply: Yes Adjustable working height on tripod: 110 - 160cm Recommended magnifications: 36x - 204x Telescope for night and solar observationSCOPE OF DELIVERY Optical MCX Tube in Fork Mount GoTo Computer Handbox with Hand Strap Field tripod with polar wedge AZ/EQ Smartphone holder for photography through the telescope BRESSER Super Plössl eyepiece 26mm (1.25") LED red dot finderAperture solar-filterObjective dust capInstruction manual