Vixen T-C Ring for C Mount

The optics of the VMC260L are significantly better than the traditional Schmidt-Cassegrain telescope. Despite its high 3000 mm focal length, it is just 650 mm long. Featuring a large 260 mm aperture, the telescope collects large amounts of light for serious professional observations and photography of the planets and countless deep-sky objects. Thanks to the dielectric mirrors, the VMV260L guarantees razor-sharp images and maximum brightness. The open lens barrels cool the telescope quicker than conventional closed Cassegrain systems. The telescope can be used with an optional 0.62x focal reducer to reduce the aperture ratio to 1:7.1. This shortens the exposure times and allows you to photograph large objects. The telescope comes with a standard dovetail bar and a carry handle that doubles up as a camera holder for night sky photography. The Finder Scope and the Vixen Flip Mirror is not included in this version ! FEATURES Very short cool-down time thanks to open lens barrel Optimised system for photography Very transportable – only 650 mm long Lightweight design – only 12.1 kg Large 260 mm aperture Built-in correction lens in front of the secondary mirror Backfocus without Reducer: 149,4 mmBackfocus with Reducer: 63,5 mmTotal weight: 12.1 kg WHAT’S INCLUDED VMC 260 telescope/lens barrel Carry handle VIXEN standard dovetail barFinder Bracket ShoeEA60 mm to 50.8 mm SX

This adapter is intended to connect a MikroCam or other c-mount camera with the microscope. It fits microscopes with a 23.2mm trinocular tube (e.g. Advance ICD, Researcher Trino), or eyepiece tube with the same diameter (e.g. Erudit DLX, Researcher Bino).This adapter is already included with the MikroCam SP and MikroCamII series. It might be a useful addition to the MikroCam Pro HDMI series, if the microscope does not come with a direct c-mount connection.This adapter is also suitable for c- or cs-mount cameras of other brands and suppliers.

Discover the possibilities and forge new paths with the Nebula EXOS-2 Goto Mount!Mount and TripodThe BRESSER EXOS-2 is a stable mount with a high load capacity and precise tracking for visual observations and astrophotography. Double radial groove ball bearings in both axes ensure precise, smooth motion, and the RA axis bearing has been optimized to reduce backlash. Additionally, the tripod is reinforced to further suppress vibrations. The BRESSER EXOS-2 can be loaded with up to 13 kg of optics for purely visual use depending on the length and purpose!Nebula: the powerful and flexible Goto systemWith the new Nebula Goto system, set off for new astronomical shores. This system offers several control options. You can operate the mount directly via its own Nebula control interface using your smartphone or tablet (iOS and Android supported). Alternatively, you can also use a planetarium software such as SkySafari. Manual control remains an option as well. For this, a hand box for minor corrections or simple control commands is included.Furthermore, with the BRESSER Nebula Goto Kit, you can connect your laptop or PC directly via WIFI or LAN cable (recommended for faster data transfer) to the Nebula control unit. This not only gives you full control over the mount but also allows you to connect various devices such as cameras, motor focus, filter wheels, etc. directly to the control unit via various USB ports. This eliminates the need to connect each device to your computer via cables. The pre-installed program KStars / EKOS lets you comfortably control all devices from your PC or laptop. Electronic polar alignment or guiding can also be easily achieved with the Goto Kit, provided you have a camera connected. You are also not limited to the software of the Nebula control unit. Thanks to the installed ASCOM Alpaca driver, you can use your own programs on your computer to control the mount - whether it's Stellarium or N.I.N.A. The two stepper motors with a belt drive ensure a smooth, direct drive of the two axes. It's only important to have a good balance. FEATURES EXOS-2 MOUNT Stable parallactic mount with fine drive in both axes Ball bearings in both axes for more precise movements Sturdy height-adjustable stainless steel tripod (Min. 69 cm / Max. 109.5 cm) Load capacity of up to 13 kg Spirit level for easy horizontal alignment Polar height scale for setting the latitude Polar scope with optional lighting (item no. 4964212) Tripod weight: 4.7 kg Mount weight: 5.6 kg (without counterweight) Total weight including counterweight: 14.8 kg Batteries: not included FEATURES GOTO SYSTEM Belt drive for a more precise, quieter tracking Stepper motors with high resolution (0.36´/microstep) Hand control box for direct control of the mount Virtual hand control box for smartphones and tablets PC control – ASCOM compatible USB ports for cameras, motors, filter wheels etc. SCOPE OF DELIVERY BRESSER EXOS-2 Mount Polar finder scope with optional illumination Stainless steel field tripod with accessory tray 1x 4.5-kg counterweight 2 stepper motors for the axes (RA and DEC) Raspberry Pi control unitBasic handbox 230V / 12V / 3 A power adapterConnection cableManual for download