Vixen T2 ring for Nikon

Connect your BRESSER Microscope or Telescope with a Nikon SLR camera and take images or videos of your observed object!The BRESSER T-Mount is the connecting piece between the camera adapter and SLR camera. To find out what T2-ring you need, look into the instruction manual of your camera.FEATURESConnecting piece between the camera adapter and Nikon SLR cameraHigh-quality and precise workmanship made of metalA corresponding camera adapter is neededSCOPE OF DELIVERYT2 Ring Nikon

The BRESSER Telescope Camera Adapter is the connecting piece between your 35 mm DSLR camera and the telescope. The connection to your camera can be achieved with the fitting T2-mount (T2-mount optional). For the focal fotography, you need to unscrew the bottom part of the adapter and attach the camera with the fitting T2-mount directly to the push-on contact. The eyepiece projection is possible when you put an eyepiece into the adapter and tighten the knurled screw. After that, you have to attach the T2-mount and the camera and you are ready to go.FEATURESEyepiece connection diameter: 31.7 mm (1.25")Eyepiece total diameter max. 35mm  SCOPE OF DELIVERYTelescope Camera Adapter 1.25"

This lightweight 5'' Newton is the perfect entry-level telescope. Thanks to its great light collecting ability, it produces bright and sharp images and offers outstanding value for money. As well as being ideally suited for observing the moon and the planets, it can also be used to observe other objects such as star clusters, nebulae or other galaxies. The T2 thread on the focuser can be used to connect a DSLR camera in combination with an optional T2 ring. FEATURES Newton reflector telescope with 130 mm diameter Lightweight design and very portable 31.7 mm (1.25’’) connection and 42 mm T-thread Focal length: 650 mm Aperture ratio: f/5 Limiting magnitude: 12.3 Weight: 5.3 kg DELIVERY CONTENT R130Sf telescope 6x24 finder scope 2 Plössl eyepieces (20 mm and 6.3 mm) Dovetail adapter 2 tube clamps

Filter Set 1 is recommended for Moon & Planets from 50mm (2'') Aperture Set 1 includes the following filters: Explore Scientific Filter 1.25" Light Yellow No.8 - 0310268 Watching the Moon surface through the filter, the contrasts will enormously increase. Same with planet Mars. On the huge planet Jupiter, when using the filter, you can even see the contrasts between the cloud-bands and a lot more details. Starting with a telescope diameter of 8“ and a clear sight, you even get to see various details of Saturn. Explore Scientific Filter 1.25" Orange No.21 - 0310273 This one really supports the detection of the dark areas on the planet Mars. The details of the clouds of Saturn and Jupiter are also so much more visible through the Filter. Explore Scientific Filter 1.25" Blue No.80A - 0310264 The color of light blue really supports watching the high clouds on Mars. The contrast increases. The dark red structures will be shown even darker, so this is the perfect filter for watching the big red Flecks on the gas planet Jupiter. The rings of Saturn will be accentuated, the structures of the Venus Atmosphere will be even finer. EXPLORE SCIENTIFIC 1.25" Filter Grey ND0.9 - 0310245 The neutral density filter transmits light uniformly across the entire visual spectrum. It serves as an excellent filter to reduce glare and irradiation when observing the Moon with any telescope 4"(10.2cm) and larger. The ND96 filter may also be employed in the splitting of close double stars where one of the binary pair significantly exceeds the other in brightness. What ist a color Filter for and do we really need it? Color Filters darken the light slightly, that reaches the eye or the sensor of the camera. This eliminates for instance stronger transitions. The result is that your picture turns out with more contrast which automatically shows more details. FEATURES Made from high-quality optical glass Filter glass is absolutely parallel All optical surfaces have anti reflex coatings Filter housing from black anodized aluminum Filter threads on both ends (female/male) Multiple filters usage is possible SCOPE OF DELIVERY 4pcs color filter 4pcs protection-case

Connect your BRESSER Microscope or Telescope with a Sony System camera and take images or videos* of your observed object!T-Mounts are the connecting piece between the T2 camera adapter and the system camera. Please read the instruction manual of your camera to find out which T-Mount you need, look into the instruction manual of your camera.The adapter will provide the necessary distance extension between the flange focal length of 18mm for E-Mount and 55mm for T2. The overall length is 37mm.For Sony NEX or ILCE cameras with E-Mount bajonet (e.g. Sony Alpha 6000, Sony A7S / A7R)SCOPE OF DELIVERYT2-Ring für Sony E-Mount camerasFor Sony NEX, ILCE Cameras (e.g. A7S, A7R)

High resolution deep sky camera with large SONY EXMOR IMX-571 APS-C CMOS sensor and active cooling. This camera's extreme sensitivity is achieved through SONYs backside illumination technology. This camera should appeal to both advanced users and those looking to move up from DSLRs for more serious deep sky imaging.Enter the world of astrophotography now. With the new EXPLORE SCIENTIFIC Deep Sky Astro camera you get a modern complete package for straightforward shooting of astro photos and videos. Finally, an easy-to-use camera for capturing galaxies, star clusters, the moon and even planets with high resolution and low sensor noise. Thanks to the fast USB 3.0 computer interface, all image data is transferred within a few seconds. Long waiting times for images are now history. Simply connect the camera to your telescope using the T2 female thread (M42, 0.75 mm) or the supplied 2" (50.8 mm) plug-in adapter and after installing the drivers and the included EXPLORE Capture recording and editing software, you are ready to take the first real astro photos with a highly specialized camera for your application.  The EXPLORE Capture Pro software included in this package not only offers the basic functions required for image and video capture, but also many helpful special functions for image post-processing and camera setup. Functions such as live image display, exposure settings, white balance, dark image subtraction, stacking, timelapse recording and much more can be configured individually. This very sophisticated software makes your entry into astrophotography really easy. With the automatic settings you can produce absolutely presentable results without any previous knowledge. As soon as you feel confident, simply switch off the automatic settings and gradually explore the software's more individual professional settings. The new EXPLORE SCIENTIFIC Deep Sky camera has a highly sensitive and very low-noise SONY EXMOR IMX-571 APS-C CMOS Sensor, which can be cooled down to 40 °C below ambient temperature by the two-stage thermoelectric cooling. In contrast to normal DSLR cameras, this guarantees much lower noise and fewer hot pixels in your shots. The images are not only much sharper and more brilliant, but also contain more usable image information. Through the carefully automatically-controlled setting of the desired camera temperature, the it's easy to create of dark frames which can be re-used under similar shooting conditions - speeding up your processing considerably. The large-format CMOS sensor with 28.3 mm diagonal also allows large image fields and simplifies the adjustment and centering of objects considerably. The secret to the high light sensitivity of this camera is SONY's new back illuminated EXMOR CMOS sensor. It increases the quantum efficiency to up to 80 % at 533 nm, which leads to an extremely high sensitivity and subsequently particularly bright and high-contrast photos.The camera has a built-in USB hub with 2 x USB 2.0 ports at the rear. Connect your additional autoguider camera or motor focus etc. via a short USB cable and reduce the risk of cable tangles and cable breaks. Separate cable connections between your accessories and your computer are no longer necessary. A sturdy hard case for the camera plus accessories is also included. IMPORTANT NOTES: Don't get confused by the megapixel data and the contrary price structure. In the field of astronomy, the key criterion is not the sensor resolution but the maximum light sensitivity. The main goal is to capture as much light as possible in a short time.DOWNLOAD latest camera software and drivers see download folder "Manuals" or here: https://www.touptek-astro.com/downloads Sample photos made by Lóránd Fényes in Hungary: https://fenyeslorand.hu/m31/https://fenyeslorand.hu/ic349_merope_nebula/https://fenyeslorand.hu/asztrofotok/Field of view for different focal lengths in arc minutes and degrees: 400 mm - 201´ x 135´  (3.4 x 2.3 degrees)500 mm - 161´ x 108´  (2.7 x 1.8 degrees)600 mm - 134´ x 90´  (2.2 x 1.5 degrees)700 mm - 115´ x 77´  (1.9 x 1.3 degrees)800 mm - 100´ x 67´  (1.7 x 1.1 degrees)900 mm -  89´ x 60´  (1.5 x 1.0 degrees)1000 mm - 80´ x 54´  (1.3 x 0.9 degrees)1250 mm - 64´ x 43´  (1.1 x 0.7 degrees)1500 mm - 53´ x 36´  (0.9 x 0.6 degrees)1750 mm - 46´ x 31´  (0.8 x 0.5 degrees)2000 mm - 40´ x 27´  (0.7 x 0.45 degrees)FEATURESCamera type: ASTRO Colour Camera 26.0MP ATR3CMOS16000KPA Data output: single pictures and video Image Sensor: SONY EXMOR IMX-571 CMOS Colour Sensor Adjustable resolution: 6224x4168 / 3104x2084 / 2064x1386 Adjustable binning: 1x1 / 2x2 / 3x3 Frame rate per second (FBS): 6.8 / 28 / 63 Physical sensor size in pixels: 6224 x 4168diaginal: 28.3 mmMegapixel: 26 MP Sensor size: 23.48 x 15.67 mm (APS-C format)Pixel size: 3.76 µm x 3.76 µm Bit depth: 8 Bit / 16 BitBackfocus: 17.5 mm  Shutter Type: rolling shutterInternal camera memory: 512MB DDR 3 RAMThermoelectric cooling with fan: yes, up to 40°C below ambient temperature Adjustable exposure times: 150µs to 60min Operating temperature: -10 to +50°C (30-80% RLH) Cable length USB 3.0: 150cm DC cable length power supply: 200cm CNC machined aluminium housing Camera diameter: 80mm; length: 102mm Camera weight: 0.53 kg Camera connection diameter: 2.0 inch ( 50.8mm) Camera connection thread: T2 (M42x0,75mm) Filter thread: Yes, 2.0 inch in receptacle Camera connection to PC: USB 3.0 Built-in USB hub with 2 x USB 2.0 ports Power supply: Power supply 12 Volt 3,0 Ampere included Software: EXPLORE Capture included Camera driver and ASCOM driver includedOperating system: WINDOWS 10 + 11 PC requirements: CPU Intel Core2 2.8Ghz or higher / 2 GB Ram / USB 3.0 WHAT'S INCLUDEDDeep Sky Astro Camera 26.0MP Telescope adapter T2 thread to 2.0" (50,8mm) USB 3.0 connection cable 150cm Power supply 230V/12V 3.0A Dust cap Software CD Hard case Instruction manual

The ASTRO R-LITE red light flashlight is the ideal companion at night to read star charts or make adjustments to the equipment without losing the dark adaptation of the eyes. The ASTRO R-LITE offers 3 functions: Continuous light bright / Continuous light dark / Flashing. The large diffusing lens results in a very large and evenly illuminated light cone, which can also be adjusted by a sliding mechanism. By using a power-saving LED lamp, the battery life (1 x AA-LR6) is up to 100 hours. Of course, the robust lamp housing made of aluminium is splash-proof according to IPX4 and therefore particularly well suited for outdoor applications. The side cutouts on the front of the ASTRO R-LITE provide a 360° signal function. The 50 cm long carrying strap with quick coupling and an extra belt clip included in the scope of delivery ensure that the flashlight is always quickly at hand. The ASTRO R-LITE should not be missing in any equipment. FEATURES ASTRO R-LITE Red Light Flashlight Reading star maps at night Dark adaptation of the eyes is retained Continuous light bright / Continuous light dark / Flashing 360° signal function Large diffusing lens produces a uniformly illuminated light cone Carrying strap and belt clip included Battery life up to 100 hours - Battery (1 x AA-LR6) Splash-proof according to IPX4Robust lamp housing made of aluminiumSCOPE OF DELIVERYASTRO R-LITE Red Light Flashlight Carrying strap Belt clip Battery (1 x AA-LR6)