Vixen Tube Acc. Plate, white

Vixen SX 125 mm tube ring pair, whiteAttaches telescope (e.g. the Vixen SD and ED 115) to the mountDovetail bar is recommended as optional accessoryFEATURESEnables stable installation of telescope on the mountFelt-lined interiorFor the Vixen SD 115/ED 115Weight: 500 gDELIVERY CONTENT2x Tube clampsScrews

​Vixen finder shoe for attaching a Vixen-profile finder bracket to your telescope (also works with many other finder brackets).PROPERTIESVixen standard connectionFixing with two screwsWHAT'S INCLUDEDVixen finder shoeFastening screws

The Vixen white tube ring pair is designed to support telescopes. The inner sides feature a felt coating to prevent your telescope from getting scratched. The tube rings can be used with the following telescopes: A80M, A80Mf, ED81S and SD81S.FEATURES Vixen SX 90 mm tube ring pair, white Felt-lined interior Compatible telescopes: A80M, A80Mf, ED81S and SD81S Weight: 350 g DELIVERY CONTENT Vixen SX 90 mm tube ring pair, white Mounting screws

This Herschel wedge is designed for superior White-Light solar observing and imaging. It can be used with refracting telescopes up to 102mm aperture, with 1.25'' focuser. This complete system comes with installed ND3.0 filter.Herschel Wedges are used to observe the sun in White Light. Around 95% of the Sun's light is suppressed by the wedge's ceramic prism. The remaining sun light is dimmed further by a factory-installed ND3.0 grey filter. Lunt Solar Systems Herschel wedges are installed in a fully closed housing with integrated heat trap. No stray light can escape from this, therefore it is very safe method of observing our nearest star.The difference between Herschel-wedges and normal front mounted filters is that the filtering takes place just before the eyepiece or camera. This provides better contrast and sharpness of the solar image - with more surface detail visible as a result.  Furthermore, a Herschel wedge is inherently safer than at a front mounted filter. A Herschel wedge can not rip or become punctured like a foil filter can be and it cannot become detached from the telescope objective accidentally.Only for use with refractor telescopes up to 102mm aperture:Because the full energy and heat of the sun inside the telescope, we advise solely using refractors for Herschel-wedge use. The refractor must not have corrector lenses at the back. Optical elements like corrector lenses, or secondary mirrors of reflecting telescopes, could suffer from thermal build-up by concentrated solar energy and could be permanently damaged.Tuning the brightness:Because the Herschel-wedge produces polarised light, you can use a normal polarising filter at the eyepiece, or camera-adapter. By turning the polarising filter the image brightness can be varied to the user's liking.This additional Polarising filter is not included. We recommend the BRESSER 1.25'' polarising filter, no: 4946464.FEATURESFor refractor telescopes up to 102mm apertureConnection to telescope: 1.25''Connection to eyepiece: 1.25''90° housing like star-diagonalEspecially high-quality optical surfaces for very good contrastFully closed housing with integrated heat trapNo stray light escaping - therefore it is very safeThe needed ND3.0 filter is fix installedWHAT'S INCLUDEDHerschel-wedge for 1.25'' focuserIntegrated ND3.0 filterTransport caseInstruction manual

Dovetail adapter base for SXP2, AXJ and AXD mounts.Enables attachment of Vixen standard dovetail bars to the mount.Also suitable for Guide Mount XYFEATURESFor SXP2, AXJ and AXD mountsFor Vixen standard dovetail bars Weight: 220 gDELIVERY CONTENTDovetail adapter baseFixing and locking screwMounting screwsMounting tool

Mounting head for securing Vixen standard dovetail bars. The unique friction control system enables you to move the telescope by hand without loosening the clamping lever. The included AP clamping lever allows the mount to be clamped more tightly if needed. The module is compatible with the AP mount head, but cannot be used with the AP Photoguider. The module has a hole in the centre to ensure the polar finder has an unobstructed view. FEATURES Type: Dovetail holder with slip clutch system with clamping and locking screwAxle clamp: Delivered with AP clamping lever Bearings: 1x ball bearing Dimensions: 78 x 56 mm without extrusion parts Weight: 345 gDELIVERY CONTENTAP mounting head moduleAP clamping lever Clamping screw for dovetail barLocking screw

Dovetail adapter with quick-release fastener for attaching various accessoriesEasy assembly and disassembly thanks to the quick-release fastenerThe adapter is compatible with thin mounting plates such as the ARCA-SWISS standard. The quick-release fastener of the mounting plate is clipped in from the side, making it easier to attach and remove small telescopes or camera accessories.Suitable for a wide range of different accessoriesThe M8 2-point attachment (35 mm spacing) makes it compatible not only with Vixen products, but also with many products from other manufacturers. The 1/4” standard camera thread in the centre allows for attachment to camera tripods and other equipment such as the SXP mount series.The long locking knob enables attachment to equatorial SXP mounts.Compatible equatorial mounts: SXP2 mount, SXP mountFEATURES    Low-profile mounting plate (ARCA-SWISS standard)    Screw: 1/4 inch screw hole    Screw holes: 2x M8 hole (35 mm spacing)    Can be used on: SXP, SXP2 equatorial mounts, VSD90SS    Material: Aluminum alloy    Dimensions: 87 x 55 x 15 mm    Weight: 67 gSCOPE OF DELIVERY    Dovetail adapter with quick-release fastener