Vixen universal T2 focal adapter, 60 mm

The Wide Photo Adapter 60DX connects your Nikon DSLR camera to your telescope via a 60 mm thread. Thanks to the use of new materials and an improved design, Vixen was able to significantly improve the precision and load capacity compared with conventional adapters. The adapter's large interior diameter prevents shadows at the edges of the image when using a full-frame DSLR camera.FEATURESIncreased material strength for additional stability6 screws hold the camera in position (compared with 4 on most conventional adapters)Screw tips with Delrin inserts prevents the camera from tilting and minimizes distortion.Large interior diameter prevents shadowingBlack interior prevents scattered lightCompatible with 60 mm accessories when the camera adapter is removed2 screw sets (L and S) prevent scratches on the camera housing2 screw sets for adjusting the rotation resistanceDELIVERY CONTENTVixen Wide Photo Adapter 60DX for Nikon cameras2 screw sets (L and S)

Converts the FL55SS into a high-performance astrograph The kit consists of a high-performance flattener lens, a reducer and the EX TUBE 66 connection ring, which was developed for the FL55SS Fluorite Apochromatic Refractor and improves photographic performance by dramatically flattening the surface. Ultra-sharp image over the entire field of view of the DSLR full-frame sensor The Flattener HD for the FL55SS reduces the change in the focal length of the FL55SS to a minimum and improves the evenness of the surface for prime-focus photography. The 44 mm image circle covers the entire field of view of a full-frame DSLR camera. When used in combination with the HD5.5 Reducer, the focal length is reduced by 0.79x (from f5.5 to f4.3) and the image circle retains a diameter of 44 mm, which significantly improves the sharpness across the entire field of view of DSLR cameras with a full-frame sensor. 96% light volume to the edge of the field of view The Flattener HD was specially developed for the FL55SS refractor to reduce loss of light to a minimum across the entire 44 mm image circle of full-frame DSLR cameras. Exceptionally high contrast The same anti-reflective AS coatings used on our high-end VSD 100 f/3.8 astrograph are used to provide an outstanding light transmission of 99.9% per lens surface. Thanks to the matte black surface of the Reducer HD kit, loss of light, ghosting and scattered light and largely prevented. FEATURES Ultra-sharp image over the entire field of view Designed for full-frame cameras Illuminates 44 mm image circle Cutting-edge AS coating DELIVERY CONTENT Flattener HD kit for FL55SS 66 mm extension tube Dust caps

This adapter ring enables you to take colour and nebula filters with M48 and M52 thread.The M56 thread of the filter adapter is screwed into the Wide Photo Adapter AD 60DX, for example, and then offers an adaptation to M52 and M48 filter threads for various nebula filters for photography. The adapter has each one 48 mm and 52 mm thread. The adapter ring can be used on the Wide Photo Adapter 60DX, Wide Photo Adapter 60 mm, 60 mm ring with T-thread adapter or the EA60mm up to 50.8mm.The adapter ring can be used on the telescopes A81M, A105M II, SD81S, SD115S, AX103S, FL55SS, VC200L, VMC200L, VMC260Lin combination with the optionally available adapters described above.IMPORTANT NOTE: The Corrector PH, the Extender PH and the Coma Corrector 3 cannot be used with this Adater when used with the R200SS OTA in combination with the EA 60mm to 50.8mm.FEATURESInternal thread M48 (diameter 48 mm, thread pitch = 0.75 mm)Internal thread M52 (diameter 52 mm, thread pitch = 0.75 mm)External thread M56 (diameter 56 mm, thread pitch = 0.75 mm)Applicable adapters: Wide Photo AD 60DX, Wide Photo AD 60 mm, 60 mm ring with T-thread AD, EA60 mm to 50.8 mmDimensions: 56 x 7 mmWeight: 7gMade in JapanSCOPE OF DELIVERYFilter adapter for M48mm and M52mm filter thread

Convert your FL55SS fluorite refractor into a high-performance astrograph The kit includes a high-performance reducer, flattener and the ''EX TUBE 66'' extension tube, which was developed for the FL55SS Fluorite Apo Refractor and improves the photographic performance by flattening the image right up to the edges. Ultra-sharp image over the entire field of view of the DSLR full-frame sensor Designed for prime-focus photography with the FL55SS, the Flattener HD flattens the entire field of view of full-frame DSLR cameras. The 44 mm image circle covers the entire field of view of a full-frame DSLR camera. When used in combination with the HD5.5 Reducer, the focal length is reduced by 0.79x (from f5.5 to f4.3) and the illuminated area retains a diameter of 44 mm, which significantly improves the sharpness across the entire field of view of the DSLR camera. 96% illumination to the edges of the field of view The Flattener HD was specially developed for the FL55SS refractor in order to reduce light loss to a minimum. The field of view is fully illuminated up to the edges. Exceptionally high contrast The same anti-reflective AS coatings used on our high-end VSD 100 f/3.8 astrograph are also used here to provide an outstanding light transmission of 99.9% per lens surface. In addition, the matte black surface of the Reducer HD kit eliminates loss of light, ghosting and scattered light. FEATURES Ultra-sharp image over the entire field of view Reduces the focal length and flattens the image Very high light transmission (approx. 96%) AS coatings with 99.9% light transmission per lens surface Also suitable for full-frame DSLR cameras Includes 66 mm extension Reduces the aperture ratio to f4.3 Distance to chip: 63.5 mm Dimensions: 58mm x 30mm / 68mm x 45.3mm Weight: 107g / 237g DELIVERY CONTENT Reducer HD Flattener HD Extension tube Dust caps

High-performance flattener and reducer set connection rings for Vixen telescopes SD81S, SD103S and SD115S, as well as the ED predecessor series. High-performance flattener and reducer set The kit consists of a high-performance flattener, a reducer for reducing the focal length, and connection rings (distance ring SD81, EX Tube 66), which were developed for prime-focus astrophotography with the SD81S, SD103S and SD115S telescopes. The flattener and the 0.79x reducer deliver a significant increase in telescope performance and image quality. You obtain a flat and sharp image until the edges, including with a full-frame DSLR camera. Ultra-sharp image over the entire field of view of the DSLR full-frame sensor The SD flattener improves the image quality to the edge of the field of view without changing the original focal length of the telescope. The field of view of the DSLR camera with a full-frame sensor is fully illuminated (44 mm), ensuring that stars appear sharp until the edges of the image. When used in conjunction with the Reducer HD, the focal length is reduced by a factor of 0.79 (f/7.7→6.1) whilst maintaining the 44 mm illumination. High-contrast AS coating The anti-reflex AS coating, which is also used on our high-end VSD 100 f/3.8 astrograph, delivers a high light transmission of 99.9% per lens surface. Loss of light, ghosting and scattered light images are virtually eliminated thanks to the completely matte interior coating. FEATURES Reduces the focal length by a factor of 0.79 Designed for full-frame cameras High-contrast AS coating Ultra-sharp image over the entire field of view Designed for full-frame DSLR cameras Illumination: 44 mm Correct distance to chip: 63.5 mm Designed for the SD81S, SD103S and SD115S Also suitable for the ED81S, ED103S and ED 115S DELIVERY CONTENT SD Flattener HD Reducer HD Adapter ring for SD81 66 mm EX extension tube Dust caps

This Barlow lens doubles the focal length of your telescope. It allows you to make astronomical observations with a higher magnification than a conventional eyepiece. Thanks to the Barlow lens between the eyepiece, you can obtain a greater magnification whilst maintaining a comfortable interpupillary distance.This Vixen 2x Barlow lens is ideal for observing and photographing lunar landscapes and details on the brighter planets. The Barlow lens also features a T2 connection for photography with DSLR cameras. With T2 extension tubes, it can also be used as a camera projection adapter.With a deflecting prism, the Barlow lens enables you to obtain a magnification factor of 3.3x.FEATURES2x Barlow lenses with T2 thread2-lens optical systemDoubles the magnification factorAlso suitable as a camera adapter31.7 mm sleeveWeight: 80 gDELIVERY CONTENT 2x Barlow lenses Dust caps

Set of 5 extension tubes with T2 thread on both sides for exact distances and secure hold of cameras for astrophotography. Also comes with SC to T2 thread adapter.In astrophotography, most cameras are connected to a telescope via a T2 thread (M42x0.75), the most popular international standard. However, in many cases, T2 and T2-ring adapters for connecting telescope focusers to a camera are not sufficient, as specific distances must also be observed. This is especially important when using correctors, reducers or flatteners. This extension tube set, which consists of 5 mm, 7.5 mm, 10 mm, 15 mm and 30 mm tubes, will allow you to obtain almost any distance using the corresponding combination. Each tube has a T2 interior thread on one side and a T2 exterior thread on the other side.Most telescopes either include a T2 thread adapter, or the eyepiece can be used with a simple T2 thread adapter with a 2” plug-in diameter (item no. 0510365).However, Maksutov-Cassegrain, Schmidt-Cassegrain, ACF or Ritchey–Chrétien telescopes may use a so-called SC thread. To allow you to use this extension tube set with these telescopes, the set also includes an SD to T2 thread adapter.FEATURES5 T2 tubes with lengths from 5 mm to 30 mmCombination of tubes allows you to obtain distances of 5 mm to 67.5 mmFor exact camera distances in astrophotographyDELIVERY CONTENT5x T2 extension tubes (5/7.5/10/15/30 mm)1x SC to T2 thread adapter