Vixen Viewfinder 7x50, with illuminated reticule

Thanks to the large aperture of 50 mm, the Vixen 7x50 finder scope immediately reveals many objects that are not visible in smaller viewfinders. This makes it easy to adjust the telescope to the target object. The red illumination of the finder scope can be dimmed to different levels.The eyepiece is detachable (31.7 mm diameter) so that a CMOS camera with 31.7 mm diameter (available separately) can be attached and used as an autoguider. The eyepiece unit with crosshairs is also removable in order to use 31.7 mm diameter eyepieces (sold separately) with different focal lengths. This allows the finder scope to be operated with various magnifications.The lens is designed to be compatible with CMOS cameras. The distance between the bottom of the 31.7 mm sleeve on the camera side and the sensor surface should be approximately 17 mm. However, the focus position may vary depending on the camera, so you should adjust the guiding camera for focus before use. The focus of the optics is adjusted by rotating the lens. First, the black lock ring on the main optics must be loosened. Then, the focus can be adjusted by turning the lens mount. Please also read the operating instructions for the viewfinder and the CMOS camera used.If the focus of the viewfinder has been adjusted, the focus position must be readjusted when using the eyepiece unit.FEATURESMagnification: 7xAperture: 50 mmLenses: coatedCrosshairs: illuminated in red, dimmableDimensions: 220 mm × Ø 58 mmWeight: 467 gSCOPE OF DELIVERY7x50 viewfinderEyepiece unit with illuminationCR2032 batteryInstruction manual

Top viewfinder telescope with upright field, illumination, 90° view and pole viewfinder engraving - image sharpness and viewing behavior raise this viewfinder significantly above the level of the usual 8x50 viewfinder telescopes. The upright image field facilitates orientation. Multi-Coating on all surfaces. This polar finder is mainly intended for the observer with a transportable telescope. The 90° view facilitates operation, and with the help of the pole scale and the lighting, a telescope can be quickly and safely aligned to the celestial pole. The upright field of view makes the handling together with the high image sharpness a pleasant experience. The lighting is powered by two LR41 button cells.

Universal 50mm viewfinder and guide telescope with a focal length of 220mmExcellent 8x50 viewfinder telescope with removable eyepiece unit and crosshairs with adjustable red illumination. The precise helical focuser and the 1.25 inch /31.7mm plug-in connection, as well as the T2 camera connection thread (M42x0.75mm), allow the autoguiding required for long time exposure to obtain a point-shaped star image. It can also be used as a mini travel telescope.High quality 8x50 viewfinder telescope with adjustable crosshair illuminationImage sharpness and viewing characteristics lift this viewfinder well above the level of the usual 8x50 viewfinder scopes. The visible image is bright and crisply sharp. Furthermore, this viewfinder has a very large field of view (FOV) of 6.96 degrees. This makes finding and adjusting objects much easier. The existing scale markings (pitch=1 degree) on the crosshairs are a good reference for estimating distances, and the open centre markings also make it easier to centre objects precisely. All lens surfaces are protected against weathering by multi-coating and guarantee a bright viewfinder image due to the high light transmission values. The adjustable red LED illumination unit is powered by two LR41 coin batteries. The main lens and the crosshairs can be focused independently of each other, giving you perfect focus for your eyes.Compact tracking unit for autoguidingOne of the main applications for this telescope is the so-called autoguiding. Here the usually larger photo-taking optics are actively corrected by a smaller guiding telescope with a second tracking camera. This means that the mechanical fluctuations in the tracking accuracy, which are present in all astronomical telescope mounts, are measured by the tracking camera and compensated accordingly. This is necessary in order to obtain a point-shaped star image on the astrophotos during long time exposures and to avoid unwanted star trails. For this purpose, the guiding telescope is inserted into the existing viewfinder shoe of the photo-taking optics and aligned parallel. If the existing viewfinder shoe is not compatible, a suitable viewfinder shoe is also included. With the 1.25 inch / 31,7mm plug connection at the rear end or via T2 thread connection (M42x0,75mm), a tracking camera can be mounted afterwards. This is held securely by a brass ring clamp and 3 clamping screws. Please note the required back focus for your tracking camera. The focal plane (backfocus) is approx. 22mm behind the T2 thread. The sensitive focusing on the guiding star is done by a large knurled wheel of the mechanically precise manufactured helical focuser. For easy reproduction of the point of focus, this has a white millimetre scale from 0 to 28mm, which is attached by laser engraving. After the tracking camera has been connected directly or via computer to the telescope mount and the necessary basic settings have been made, the first astrophotos with long time exposure can be taken.Use as mini travel telescopeThis viewfinder and guide telescope can also be used quite simply as a mini travel telescope. With the optional eyepieces, a magnification of 8x to 40x can be achieved. Nearly all eyepieces with a focal length of 5 to 26mm and 1.25 inch/31.7mm plug connection are suitable. Especially recommended are the EXPLORE SCIENTIFIC eyepieces of the 52 degree (Art. 02195xx) and 62 degree (02196xx) LER series. Note: Only straight view use is possible.Metal viewfinder holder and viewfinder shoeThe mount of this viewfinder and guide telescope is completely made of aluminium and is a stable base. The viewfinder mount is suitable for many common types of telescopes, such as EXPLORE SCIENTIFIC, BRESSER MESSIER etc. If the existing viewfinder shoe is not compatible, a matching viewfinder shoe is also included. This can be attached to the telescopic tube by means of four M5 screws. The bore distances of the viewfinder shoe are 31.7mm on the longitudinal and transverse axis. The six large adjustment screws with non-slip knurling make it easy to align the viewfinder, even with clammy fingers. All adjusting and clamping screws have plastic tips that effectively prevent the viewfinder housing and viewfinder mount from being scratched.FEATURESExcellent 8x50 viewfinder and guiding telescopeCan also be used as mini travel telescopePerfect image sharpness and good viewing comfortFMC Multi-coated lens surfacesLens focal length: 220mmMax. possible camera weight: 550gRemovable eyepiece/cross hair unitCamera connection via 1.25 inch / 31.7mm plug connection or T2 threadT2 thread: M42 x 0,75mmPrecise helical focuser for focusing the visible imageFocuser travel range: 28mmClose focus distance: 3 mLaser engraved millimetre scale from 0 to 28mm on the focuserFocal plane (backfocus) is approx. 22mm behind the T2 threadSeparate focusing of the crosshair at the eyepieceVery large field of view FOV of 6.96 degreesWith adjustable red cross-hair iillumination Scale markings crosshair with 1.0 degree graduationPower supply of illumination unit: coin battery type LR41 (2pcs)Brass ring clamp and 3 clamping screws on the 1.25 inch plug connectionWith optional eyepieces magnifications from 8x to 40x can be achievedSuitable are almost all eyepieces with 1.25 inch/31,7mm shaftMounting of the viewfinder telescope is completely made of aluminiumViewfinder mount with 6 large adjustment screws with knurled head for easy gripFinder shoe suitable for EXPLORE SCIENTIFIC, BRESSER MESSIER etc.Additionally a suitable viewfinder shoe is includedBore distances of the viewfinder shoe are 31.7mm on the longitudinal and transverse axisAdjusting and clamping screws have plastic tipsSCOPE OF DELIVERY8x50 viewfinder/guiding telescopeEyepiece unit with crosshairCrosshair illumination unit incl. batteriesViewfinder holder with viewfinder shoeInstruction manual

Explore Scientific 8x50 illuminated finder scopes (available in straight-thru and right angle versions) produce images that are right-side-up and left-to-right corrected views, which makes it easier to find objects in the sky. The Explore 8 X 50 Straight-Thru Erect Image Illuminated Finder Scope, with its scale markings and open Center, not only helps you center objects precisely, but gives a reference of the exact field of view in Degrees. The deep red Illumination can be adjusted to just the right brightness. The eyepiece has comfortable eye relief and produces a 6,97 degrees field of view. Both the eyepiece and the main objective can be focused independently so that you can obtain perfect focus for your eyes. The straight-thru finderscope weights just under a pound (450gr), and measures 216mm" x 63mm" x 58mm". FEATURES High quality 8x50 upright viewfinder With adjustable crosshair lighting with scale markings Perfect image sharpness and good viewing behaviour Large field of view FOV of 6.96 degrees Focusing of lens and crosshair separately possible.  Multi-coated lens surfaces. Power supply by 2 pcs coin battery type LR41.FEATURESHigh quality 8x50 upright viewfinderWith adjustable crosshair illumination and with scale markingsPerfect image sharpness and good viewing behaviourLarge field of view FOV of 6.96 degreesFocusing of lens and crosshair separately possibleMulti-coated lens surfacesSCOPE OF DELIVERYFinder scopeFinder bracket

The Vixen VA225C autoguider camera is designed to tackle common challenges in astrophotography, such as atmospheric interference and minor tracking errors that can cause star trails during long exposures. When paired with an optional guide scope, this highly sensitive colour CMOS camera continuously monitors star positions and automatically adjusts your equatorial mount in real time to correct for any deviations. This allows you to capture sharp, long-exposure images — especially useful when using telescopes with longer focal lengths. Beginner-friendly operation The VA225C makes it easy for newcomers to get started with autoguiding. Simply connect the camera to your telescope mount using the included ST4 cable for fully automated tracking control. The dedicated “Vixen Autoguider” PC software offers three preset guiding modes — City, Suburban, and Dark Sky — tailored to different viewing conditions. You can also fine-tune the settings to suit specific locations and atmospheric conditions if needed. Accurate polar alignment — without a polar finder With its built-in plate solving functionality, the VA225C allows for precise polar alignment without the need for a separate polar finder. You can check the alignment accuracy in real time via the software interface and make direct adjustments on the spot. This feature simplifies your setup process and ensures optimal conditions for successful astrophotography sessions. Exceptional sensitivity and flexible connectivity Thanks to its excellent light sensitivity, the VA225C can reliably detect suitable guide stars even with very short exposures. The camera comes with a 1.25" nosepiece for connection to guide scopes or off-axis guiders, a 1.25" filter thread (M28.5x0.6), and a C-mount thread (1" x 1/32"). We recommend the Vixen 7x50mm Finder Scope II (sold separately, item no.: X086161) as a guide scope. Its parfocal design ensures the focus remains consistent when switching between an eyepiece and the camera — so your guide star stays locked in view. FEATURES Highly sensitive SONY IMX225 colour CMOS sensor (1/3 inch) Plate solving for precise polar alignment without polar finder User-friendly Vixen Autoguider software Resolution: approx. 1.2 megapixels Pixel size: 3.75 µm x 3.75 µm ST4 autoguider port (6-pin modular socket) 1.25" nosepiece (31.7 mm) for guide scopes and off-axis guiders 1.25" filter thread (M28.5x0.6) C-mount thread (1" x 1/32") USB Type B port Powered via USB 2.0 (from PC) Compatible with Windows 7, 8, 10, 11 SCOPE OF DELIVERY Autoguider camera ST4 connection cable USB cable Instruction manual

This Vixen 90° mirrored Star Diagonal, with 1.25” / 31.7 mm nosepiece connection, makes observing objects higher up in the sky much more pleasant and also allows the user to revolve an eyepiece to a more comfortable observing position. This star diagonal is a good quality option and compatible with a large array of refractors and Cassegrain design instruments. It will accept 1.25” / 31.7mm eyepieces and accessories and also has a threaded nosepiece, into which can be fitted 1.25” filters, or Barlow elements, saving you the bother of having to keep swapping these when using different eyepieces. The inside of the diagonal is blackened to minimise internal reflections and light scatter and the body has a pleasingly well-engineered feel to it, without being too weighty. Eyepieces and other accessories are held in place by a simple-to-operate knurled set screw. As this is a mirrored diagonal, it also corrects the up/down orientation of image in astronomical refractors and Cassegrain telescopes, but please note that left and right will still be inverted within the field of view. Not suitable for use with Newtonian telescopes. FEATURES Nosepiece diameter: 1.25” / 31.7 mm Weight: 124g Accessories: Protective dust capsWHAT'S INCLUDED1.25"/31.7mm Star Diagonal Protective dust caps

​Vixen S 50mm finderscope bracket short, for 50mm findersFor attaching a 50 mm finderscope to the standard Vixen finder shoe, found on many designs of telescopes (not just Vixens)PROPERTIES50mm finderscope bracket shortFor attaching a 50 mm finderscopeCompatible with standard Vixen finder shoeWeight: 195 gWHAT'S INCLUDED50mm finderscope bracket short