The Vixen XY mount for guide scopes offers a secure and stable mounting of the guide scope and allows very precise fine adjustment of the telescope
- XY guide scope adjuster
- Stable telescope attachment for up to 5 kg
- Easy to adjust via set screws
- Connections for M6 and M8 screws
- Adjustment range of +/- 6.5 degrees
- Dimensions: 100 mm x 79 mm x 160 mm
- Weight: 750 g
Currently not available
Product information "Vixen XY Guide Scope Mount"
This protects the guide scope, as it does not need to be clamped in place as with guide scope rings.
The Guide Mount XY should be used in combination with a suitable mounting solution, such as the X002263 Accessory plate DX or X000266 Dovetail mounting block.
FEATURES
- Stable telescope attachment for up to 5 kg
- Easy to adjust via knurled screws
- Protects the optics better than guide scope rings
- Connections for M6x2 (35 mm clearance) and M8x2 (35 mm clearance)
- Adjustment range of +/- 6.5 degrees
- Weight: 750 g
DELIVERY CONTENT
- XY guide scope adjuster
- 2x M8x12 mm screws
- 2x M8x20 mm screws
- 2x M6x20 mm screws
- Hex key 5 mm, 6 mm
| Batteries required: | No |
|---|---|
| Colour: | black |
| Load capacity (kg): | 5 |
| Material: | Aluminium |
| Net Weight total (incl. accessories) (g): | 750 |
Product and safety instructions
Manufacturer:
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede
www.bresser.de
- General safety instructions DANGER Risk of suffocation! Improper use of this product can result in suffocation, especially for children. Therefore, carefully observe the following safety instructions. Keep packaging materials (plastic bags, rubber bands, etc.) away from children! There is a risk of suffocation! Keep cords, ribbons, and similar materials away from children! They could accidentally strangle themselves and suffocate! NOTE Risk of material damage! Improper handling can damage the device and/or accessories. Therefore, only use the device according to the following safety instructions. Do not dismantle the device! In the case of a defect, contact your dealer. They will contact the service center and may send the device in for repair.
- Never look at the sun through an eyepiece/telescope without a certified protection filter. A moon filter can never be used for solar observation. The moon filter is only suitable for moon observation. The solar filter must be mounted in front of the telescope opening, not at the eyepiece. Otherwise, the concentrated light beam through the optics will immediately destroy the filter foil, leading to severe eye damage, including permanent blindness.
- Never leave the optics unattended. Children and inexperienced adults could point the telescope at the sun without proper precautions and lose their eyesight.
- Do not expose the device to high temperatures.