Specialised studio gear for all your projects

Be fully prepared for every photo and video shoot

Studio accessories

BRESSER BR-LP20 Cleaning kit 4-piece

The BRESSER BR-LP20 cleaning kit is designed for thoroughly cleaning equipment and lenses. This set contains four handy cleaning tools: Rubber blowerWith this, you can blow dust and small particles off the lens or camera without touching it. This prevents scratches or damage that can occur from direct contact. BrushA soft brush for removing more stubborn dirt that is not easily blown away. It is designed to be soft enough to avoid causing scratches. Cleaning fluidSpecial fluid for cleaning the lens without leaving streaks or residue. Although the fluid is not harmful, it is advised to avoid inhalation and contact with eyes and skin. Microfiber clothA soft cloth used in combination with the cleaning fluid to wipe the lens or camera clean. Microfiber is ideal for absorbing grease and fingerprints without scratching the surface. This set is an essential toolkit for photography enthusiasts who want to keep their equipment in top condition. Using the right cleaning tools like these helps to extend the lifespan of your equipment. SCOPE OF DELIVERY 1x Rubber blower 1x Brush 1x Bottle of cleaning fluid 1x Lint-free cloth

€4.95*

Details

BRESSER BR-141 flexible Gooseneck Smartphone Holder

The universal BRESSER BR-141 smartphone holder is designed for devices with a width of 5 to 15 cm. The smartphone clamps into the adjustable holder and can be turned to the desired position. The strong and sturdy clamp on the other side allows the holder to be attached to a table, shelf or bar. The maximum load is 400 g. FEATURES Fully flexible and adjustable smartphone holder Designed for devices with a width of 5 to 15 cm 400 g maximum load Strong clamp for securing the holder to a table, shelf or bar WHAT’S INCLUDED 1x smartphone holder

€7.00*

BRESSER BR-21 Gooseneck with table clamp/ tube clamp and spring clamp

Whether in the photo or film studio, or for camping and leisure, the BRESSER BR-21 gooseneck is always a good helper for attaching photo studio accessories and other utensils. With two different clamps, the flexible arm is quickly and flexibly attached to table tops or tripos.The stable and flexible component has a total length of 43 cm and can be stowed away quickly to save space. Books, reflectors, microphones, leisure equipment and much more - there is hardly anything that the BRESSER Gooseneck cannot hold. The rubberised screw clamp with an opening of 0,5 to 3,5 cm can also be mounted on tubes and rods, microphone stands or lamp tripods. The rubberised spring clamp with its robust width of 7,5 cm has a maximum opening of 5 cm. Conveniently, the BRESSER BR-21 can also be used in reverse. The spring clamp can be used as a table clamp and screw clamp can be used as a holder for tubes, rods ect.NOTE: The load capacity of approx. 1-2 kg depends on the angle of inclination and may therefore vary.PROPERTIESFlexible bendable arm 43 cm/ Ø 15 mmTotal length: 62 cmMetal clamp with strong spring on one side, screw clamp on the other sideRemoveable rubber lipsSpring clamp opnening: max 5,5 cmClamp width: 7,5 cmTube clamp width: 4 cm/ length: 5 cmScrew clamp opening: 0,5 cm - 3,5 cmLoad capacity: max 1-2 kg, depending on angle of inclinationSCOPE OF DELIVERY1x BRESSER BR-21 Flexarm

€18.00*

BRESSER BR-TP440R PRO-1 Aluminium Tripod 440 cm

The BRESSER BR-TP440R PRO-1 lamp tripod is the ideal basic equipment for photography and videography. The light stand is equipped with spring damping and can bear loads of up to 5 kg. The spigot connection with 1/4" and 3/8" inch thread can be used to quickly attach an LED panel light, a photo studio flash, a ring light and a reflector.The 105 cm footprint ensures a stable stand even outdoors and on uneven ground, even with the centre column fully extended to a maximum height of 440 cm.PROPERTIES3 section aluminium lamp tripodFolded height 120 cmMaximum stand width 105 cmTube diameter of stand feet approx. 23 mmMinimum height: 135 cmMaximum height: 440 cmRemoveable 1/4" and 3/8" inch spigot adapterMaximum load 4-5 kgSCOPE OF DELIVERY1x BRESSER BR-TP440R PRO-1

€55.00*

Details

BRESSER BR-LP10 Lens Cleaning Pencil

When cleaning high quality optical lenses, you have to be very careful. After all, it would be very annoying to successfully remove the dust but leave a scratch behind. With the BRESSER BR-LP10 lens cleaning pen you can safely clean optical and coated glass. With the brush on one side you can remove coarser dirt before polishing the lenses with the other side. FEATURES lens cleaning pencil for safe cleaning of optical and coated glass brush to remove dust on one sidepolishing pad on the other side SCOPE OF DELIVERY 1x lens cleaning pencil

€2.75*

BRESSER B-RS-180 Trolley for ceiling rail system

With the BRESSER B-RS 180 trolley, the BRESSER CR-1 ceiling rail system can be extended to attach further photo studio accessories or pantographs.The metal bracket allows the trolley to be pushed into position on the rails and serves as a damper and brake.PROPERTIESSpigot adapter for various accessoriesDamper with metal bracketVariable useMaximum felxibilty thanks to the spigot adapterSCOPE OF DELIVERYSingle trolley for ceiling track

€11.00*

BRESSER B-11 large Metal Studio Clamp

This universal clamp can be attached to a shooting table, a shelf or a desk. Also very suitable to fix background paper and cloth.FEATURESsturdy metal clampstrong metal springremovable rubber lipswidth: 9 cmmax. opening: 6 cm SCOPE OF DELIVERY1x studio clamp

€3.75*

BRESSER BR-10 Metal Studio Clamps 5 pieces

This universal clamp can be attached to a shooting table, a shelf or a desk. Also very suitable to fix background paper and cloth.FEATURESsturdy metal clampstrong metal springremovable rubber lipswidth: 8 cmmax. opening: 6 cm SCOPE OF DELIVERY5x studio clamp

€12.50*

Details

BRESSER BR-B98 Padded Studio Bag 98 x 29 x 29cm

Well-packed and quickly shouldered - here everything finds its placeThe BRESSER BR-B98 studio bag is a perfect and handy companion for photo studio equipment with variable inner walls. The high-quality material ideally protects sensitive photo studio equipment such as lamp tripods, flash heads and studio umbrellas from dust and light moisture. Everything can be quickly stowed and shouldered in the well-padded transport bag with its large opening and parallel zip.There is enough space in the outer compartment for smaller accessories such as cables, filters or radio triggers. With the adjustable tension straps of the BRESSER BR-B98 studio bag, everything can be lashed down securely, even if the space is not fully used.FEATURES Large, spacious carry bag for studio equipment Parallel zip with large opening for easy packing and unpacking Fully padded Includes dividers (24 x 24 cm) to create separate inner compartments Additional exterior compartment for small accessories Handles and length-adjustable shoulder strap Integrated compression straps Made from water-repellent nylon WHAT’S INCLUDED1x Studio bag 3x Dividers (24 x 24 cm)

€38.00*

Details

BRESSER BR-20 Gooseneck with clamps

Whether in the photo or film studio, for camping or leisure activities, the BRESSER BR-20 gooseneck is always a good helper for attaching photo studio accessories and other utensils. With two sturdy spring clamps, the flexible arm is quickly and flexibly attached to table tops or tripods.The flexible part measures 43 cm in length and with a total length of 64 cm, the gooseneck can be quickly stowed away to save space. Books, reflectors, microphones, leisure equipment and much more - there is hardly anything that the BRESSER BR-20 Gooseneck will not hold. The rubberized spring clips with a width of 7,5 cm and an opening of up 5 cm can also be attached to tubes and rods, microphone stands and lamp tripods.NOTE: The load capacity of up to 1 kg depends on the angle of inclination and may therefore vary.PROPERTIESFlexible bendable arm: 43 cm/ Ø 15 mmTotal length: 64 cmRemovable rubber lipsSpring clamp opening: max. 5,5 cmClamp width: 75 mmLoad capacity: max. 1 Kg, dependig on angle of inclinationSCOPE OF DELIVERY1x BRESSER BR-20 Flex Arm

€16.00*

BRESSER TR-688V video tripod with 2-way tilt

he BRESSER TR-688V is a solid video tripod at a small price! The three tripod legs can be individually adjusted in length thanks to the practical quick-release buckles. The rubber feet can be angled as required. So you can find stable stand even on slopes and on uneven ground. Ideal for photographing outdoors! 360 ° shots are not a problem with the 2-way tilt. With the help of the handgrip, the tripod head can be rotated 360 ° smoothly. In addition, the camera can be tilted up to 90 ° over two axes. An integrated water scale and canister bubble ensure the required precision. Want to quickly switch between cameras with different lenses and settings? With the quick-release plate is no problem! FEATURES especially lightweight and transportable suitable for cameras and spotting scopes up to a total weight of 3 kg infinitely height adjustable from 63.5 cm to 171 cm 2-way tilt with quick-release plate 1/4 "photo screw two integrated circular levels individually adjustable tripod legs for uneven terrain by hand crank extendable column Hook for attachment of a counterweight for more stability SCOPE OF DELIVERY Video tripod with 2-way tilt Quick release plate Tripod bag with shoulder strap

€58.00*

BRESSER BR-LP15 Cleaning kit - 3 parts

With the 3-piece lens cleaning set you not only clean camera or binocular lenses, but also spectacles glasses and displays and screens of smartphones, laptops, tablets, etc. thoroughly and safely. When cleaning high quality optical lenses, you have to be very careful. After all, it would be very annoying to successfully remove the dust but leave a scratch behind. With the lens cleaning pen you can safely clean optical and coated glass. With the brush on one side you can remove coarser dirt before polishing the lenses with the other side. Just blow away fluff with the bellows. FEATURES complete set for safe cleaning of camera lenses bellows for removing coarse dirt particles and fluff without scratching the lens lint-free microfibre cloth approx. 14,5x14,5cm lens cleaning pencil for safe cleaning of optical and coated glass SCOPE OF DELIVERY 1x bellows 1x lens cleaning pen 1x microfiber cloth

€4.95*

Details

BRESSER B-RS-185 Cable Runner for Ceiling Railsystem

What does a ceiling railsystem do if the power cables hang around in the way? The BRESSER B-RS-185 cable runner provide a remedy here!

€4.50*

BRESSER BR-65 Tighteners for Background Cloths - Set of 10pcs.

This set of 10 BRESSER BR-65 tighteners for cloth backgrounds attaches to background systems via a hook and loop fastener. A small clip is attached to the cloth background, which can then be tightened with the elastic band. The tighteners ensure that your background is kept tight and crease-free. The set includes a total of 10 tighteners. FEATURES 10 tighteners Attaches to background system with hook and loop fastener Small clips for holding the cloth background Cloth background is tightened via elastic band Rubber band min. 20 cm long WHAT’S INCLUDED 10x tighteners

€14.50*

BRESSER BR-TP400R Lightstand 400cm

A strong and stable aluminium light stand which can be folded easily to compact dimensions. There is an air suspension system in the tripod, which can stabilize any vibration caused by lowering the flash head. To prevent any reflection the aluminium is provided with a black powder coating.FEATURESaluminium light standair suspension system for shock absorptionblack powder coating to prevent undesired reflections adjustable height: 134 - 400 cmSCOPE OF DELIVERY 1x light stand1x spigot adapter (1/4" male, 3/8" male)

€45.00*

BRESSER B-RS-170 Mounting Plate + Screws for Rail System

The BRESSER B-RS-170 mounting plate allows you to secure the rails of the BRESSER ceiling rail system to your ceiling. Two 1/4" screws are included for securing the mounting plate.FEATURESMounting plate for ceiling2x 1/4" screws for ceiling railsCompatible with BRESSER ceiling rail systemDELIVERY CONTENT1x Mounting plate 2x Screws for ceiling rails

€3.50*

Details

BRESSER BH-52MT Ball Head up to 15 kg

Flexibility and precision, that's what BRESSER ball heads stand for.By means of the 360° rotatable and additionally 90° tiltable ball joint the camera can easily be brought into any desired position. For panoramic photos the ball head is also equipped with a 360° rotatable base plate. Both, the ball joint as well as the panoramic base plate can be moved smoothly and jerk-free and locked in place securely with the corresponding knobs. The integrated circular bubble level and the angle scale help with the exact positioning.The quick release plate allows for a quick and uncomplicated exchange of cameras. The BH-52MT ball head is suitable for all heavy DSLR and medium format cameras up to a total weight of 15 kg. FEATURESsturdy metal ball head for cameras up to 15 kgrubber coated quick release plate (6 x 4,8 x 1 cm) for shock absorption1/4'' photo screwintegrated circular bubble level360° rotatable base plate with angle scale3/8'' tripod threadSCOPE OF SUPPLYBall headQuick release plateManual

€38.00*

Details

BRESSER JM-34 Double Pipe Clamp 35 mm and 50 mm

A strong double metal pipe clamp. This pipe clamp can connect 2 pipes with different thicknesses to each other. They stand at an angle of 90 degrees to each other.FEATURESsturdy double pipe clampconnection of two pipes in an 90° anglesuitable for pipe diameters: 25 - 35 mm and 35 - 50 mmSCOPE OF DELIVERY1x double pipe clamp

€26.00*

BRESSER BR-56 Background Clamp Deluxe

A practical, universal plastic clamp with a very strong spring to clamp background paper, background cloth or collapsible reflectors to a bar or a tube. With this clamp you can for instance prevent a background roll from unrolling. The clamps are provided with a movable top. This provides a stable fixation and uniform pressure on the object to be fastened.NOTE!These clamps are attached to the side of the background roll, the core of the roll and the crossbar of the background system (NOT onto the background roll itself)FEATURESplastic background clampmovable toplength: +/- 16.5 cmopening: +/- 6.5 cm weight: 100 gSCOPE OF DELIVERY1x background clamp

€4.75*

BRESSER BR-23 Gooseneck with tube clamp and Spigot

The robust BRESSER BR-23B gooseneck can be quickly and easily attached anywhere to tables, tubes and tripods using the tube clamp. On the screwed-in spigot connection with a 1/4" screw thread, various daylight lamps can be mounted from LED lamps, panel lamps, light photo studio flashes. In addition, mini LED lights etc. can also be screwed on. The flexible part of the gooseneck has a length of 43 cm and has a load capacity of approx. 1 - 2 kg, taking into account the angle of inclination. With its total length of 59 cm, the practical BRESSER BR-23 gooseneck can be quickly stowed away in the photo studio equipment to save space.NOTE: The load capacity of approx. 1 - 2 kg depends on the tilt angle and may therefore vary. FEATURESFlexible bendable arm: 43 cm/ Ø 15 mm Total length: 59 cmScrew clamp opening (maximum): 35 mmScrew/ tube clamp: W: 4 cm x L: 7,5 cm x D: 6cmLoad capacity: max 1 - 2 kg, depending on angle of inclination SCOPE OF DELIVERY FlexarmSpigot adapter (1/4'' male / 3/8'' male)

€14.95*

BRESSER Background Clamp

A handy and universal metal clamp to attach background paper, background cloth or collapsible reflectors to a rod or pipe. With this clamp you can for instance prevent a background roll from unrolling. NOTE!These clamps are attached to the side of the background roll, the core of the roll and the crossbar of the background system (NOT onto the background roll itself)FEATURESsolid metal background clamplength: ca. 15 cmopening: ca. 5,5 cmweight: 70 gSCOPE OF DELIVERY1x background clamp

€8.50*

BRESSER BR-16 Universal Clamp + Spigot Adapter

Universal clamp with a strong spigot adapter. The bracket can be clamped to a photo shooting table, shelf or table. Studio lamps or flashes with a tripod thread fit on the universal spigot adapter.FEATURESversatile clampstrong springreversible rubber lipsstable spigot adapter 1/4"max. opening: 6 cmsuitable for studio lights and flashesSCOPE OF DELIVERY1x Clamp with Spigot Adapter

€5.00*

BRESSER BR-53 Background Clamp DE LUXE 3" (5 pieces)

A practical, universal plastic clamp with a very strong spring to clamp background paper, background cloth or collapsible reflectors to a bar or a tube. With this clamp you can for instance prevent a background roll from unrolling. The clamps are provided with a movable top. This provides a stable fixation and uniform pressure on the object to be fastened.NOTE!These clamps are attached to the side of the background roll, the core of the roll and the crossbar of the background system (NOT onto the background roll itself)FEATURESplastic background clampmovable toplength: +/- 10 cmopening: +/- 4 cm weight: 25 gSCOPE OF DELIVERY5x background clamp

€11.00*

BRESSER JM-46 Telescopic Wall Arm 37 to 60 cm

The practical BRESSER JM-46 lamp holder is suitable for both ceiling and wall mounting. A useful solution for confined spaces or small film or photo studios. The telescopic extension from 37 to 60 cm provides flexibility in lightning. The two-sided spigot connection with a 1/4" and a 3/8" thread makes it easy to attach LED panel lights, photo studio flashes, daylight lamps, monitors and also photo and video cams.PROPERTIESCeiling/ Wall lamp mountTelescopic extension from 37 to 54 cmSturdy mounting plate: 12 x 8 cm1/4" and 3/8" spigot connectionSCOPE OF DELIVERY1x BRESSER JM-46 wall arm1x Spigot adapter

€21.00*