Specialised studio gear for all your projects
Be fully prepared for every photo and video shoot
Studio accessories
.webp)
BRESSER BR-LP10 Lens Cleaning Pencil
€2.75*
When cleaning high quality optical lenses, you have to be very careful. After all, it would be very annoying to successfully remove the dust but leave a scratch behind. With the BRESSER BR-LP10 lens cleaning pen you can safely clean optical and coated glass. With the brush on one side you can remove coarser dirt before polishing the lenses with the other side.
FEATURES
lens cleaning pencil for safe cleaning of optical and coated glass
brush to remove dust on one sidepolishing pad on the other side
SCOPE OF DELIVERY
1x lens cleaning pencil
BRESSER BR-21 Gooseneck with table clamp/ tube clamp and spring clamp
€18.00*
Whether in the photo or film studio, or for camping and leisure, the BRESSER BR-21 gooseneck is always a good helper for attaching photo studio accessories and other utensils. With two different clamps, the flexible arm is quickly and flexibly attached to table tops or tripos.The stable and flexible component has a total length of 43 cm and can be stowed away quickly to save space. Books, reflectors, microphones, leisure equipment and much more - there is hardly anything that the BRESSER Gooseneck cannot hold. The rubberised screw clamp with an opening of 0,5 to 3,5 cm can also be mounted on tubes and rods, microphone stands or lamp tripods. The rubberised spring clamp with its robust width of 7,5 cm has a maximum opening of 5 cm. Conveniently, the BRESSER BR-21 can also be used in reverse. The spring clamp can be used as a table clamp and screw clamp can be used as a holder for tubes, rods ect.NOTE: The load capacity of approx. 1-2 kg depends on the angle of inclination and may therefore vary.PROPERTIESFlexible bendable arm 43 cm/ Ø 15 mmTotal length: 62 cmMetal clamp with strong spring on one side, screw clamp on the other sideRemoveable rubber lipsSpring clamp opnening: max 5,5 cmClamp width: 7,5 cmTube clamp width: 4 cm/ length: 5 cmScrew clamp opening: 0,5 cm - 3,5 cmLoad capacity: max 1-2 kg, depending on angle of inclinationSCOPE OF DELIVERY1x BRESSER BR-21 Flexarm
BRESSER BR-LP15 Cleaning kit - 3 parts
€4.95*
With the 3-piece lens cleaning set you not only clean camera or binocular lenses, but also spectacles glasses and displays and screens of smartphones, laptops, tablets, etc. thoroughly and safely.
When cleaning high quality optical lenses, you have to be very careful. After all, it would be very annoying to successfully remove the dust but leave a scratch behind. With the lens cleaning pen you can safely clean optical and coated glass.
With the brush on one side you can remove coarser dirt before polishing the lenses with the other side. Just blow away fluff with the bellows.
FEATURES
complete set for safe cleaning of camera lenses
bellows for removing coarse dirt particles and fluff without scratching the lens
lint-free microfibre cloth approx. 14,5x14,5cm
lens cleaning pencil for safe cleaning of optical and coated glass
SCOPE OF DELIVERY
1x bellows
1x lens cleaning pen
1x microfiber cloth
BRESSER BR-20 Gooseneck with clamps
€16.00*
Whether in the photo or film studio, for camping or leisure activities, the BRESSER BR-20 gooseneck is always a good helper for attaching photo studio accessories and other utensils. With two sturdy spring clamps, the flexible arm is quickly and flexibly attached to table tops or tripods.The flexible part measures 43 cm in length and with a total length of 64 cm, the gooseneck can be quickly stowed away to save space. Books, reflectors, microphones, leisure equipment and much more - there is hardly anything that the BRESSER BR-20 Gooseneck will not hold. The rubberized spring clips with a width of 7,5 cm and an opening of up 5 cm can also be attached to tubes and rods, microphone stands and lamp tripods.NOTE: The load capacity of up to 1 kg depends on the angle of inclination and may therefore vary.PROPERTIESFlexible bendable arm: 43 cm/ Ø 15 mmTotal length: 64 cmRemovable rubber lipsSpring clamp opening: max. 5,5 cmClamp width: 75 mmLoad capacity: max. 1 Kg, dependig on angle of inclinationSCOPE OF DELIVERY1x BRESSER BR-20 Flex Arm
BRESSER BR-LP20 Cleaning kit 4-piece
€4.95*
The BRESSER BR-LP20 cleaning kit is designed for thoroughly cleaning equipment and lenses. This set contains four handy cleaning tools:
Rubber blowerWith this, you can blow dust and small particles off the lens or camera without touching it. This prevents scratches or damage that can occur from direct contact.
BrushA soft brush for removing more stubborn dirt that is not easily blown away. It is designed to be soft enough to avoid causing scratches.
Cleaning fluidSpecial fluid for cleaning the lens without leaving streaks or residue. Although the fluid is not harmful, it is advised to avoid inhalation and contact with eyes and skin.
Microfiber clothA soft cloth used in combination with the cleaning fluid to wipe the lens or camera clean. Microfiber is ideal for absorbing grease and fingerprints without scratching the surface.
This set is an essential toolkit for photography enthusiasts who want to keep their equipment in top condition. Using the right cleaning tools like these helps to extend the lifespan of your equipment.
SCOPE OF DELIVERY
1x Rubber blower
1x Brush
1x Bottle of cleaning fluid
1x Lint-free cloth
BRESSER TR-672AN Traveler Tripod 170cm
€35.00*
Are you looking for a compact, lightweight, and versatile tripod for your photography or video projects? The BRESSER TR-672AN Traveler Tripod is the ideal travel companion for anyone seeking quality and ease of use. Thanks to its clever design and sturdy construction, this tripod is perfect for both photo and video applications—and even for lightweight spotting scopes.
Stable shooting on any surface
The three aluminum tripod legs are individually adjustable and equipped with convenient quick-lock clamps. This allows you to easily set up the tripod on uneven terrain—ideal for outdoor use and travel photography. The minimum working height is 62 cm, and it extends to a generous 170 cm.
Precise positioning with 3-way pan head
With the multifunctional 3-way pan head, you can position your camera smoothly and accurately. The integrated spirit level helps you take perfectly aligned shots, while the Quick Release plate ensures fast equipment changes—whether it's a photo camera, video camera, or spotting scope.
Compact and portable
With a folded length of just 63 cm and a weight of only 1.38 kg, this tripod is easy to carry on hikes, excursions, or vacations. Thanks to the sturdy carry handle and the included carrying bag with shoulder strap, transport is especially comfortable. The hook under the center column allows you to hang your camera bag for extra stability.
FEATURES
Maximum height: 170 cm
Minimum height: 62 cm
Folded length: 63 cm
Load capacity: up to 5 kg
Material: aluminum & plastic
Weight: 1.38 kg
3-way pan head with spirit level
Quick Release plate for fast mounting
Individually adjustable legs with quick locks
Carry handle & hook on center column
PACKAGE CONTENTS
BRESSER TR-672AN tripod with 3-way pan head
Quick Release plate
Carrying bag with shoulder strap
BRESSER BR-141 flexible Gooseneck Smartphone Holder
€7.00*
The universal BRESSER BR-141 smartphone holder is designed for devices with a width of 5 to 15 cm. The smartphone clamps into the adjustable holder and can be turned to the desired position. The strong and sturdy clamp on the other side allows the holder to be attached to a table, shelf or bar. The maximum load is 400 g.
FEATURES
Fully flexible and adjustable smartphone holder
Designed for devices with a width of 5 to 15 cm
400 g maximum load
Strong clamp for securing the holder to a table, shelf or bar
WHAT’S INCLUDED
1x smartphone holder
BRESSER TR-688V Video Tripod 170cm
€58.00*
Are you looking for a robust and lightweight video tripod for on the go? The Bresser TR-688V combines mobility, precision, and ease of use – everything you need for razor-sharp images and smooth video recordings. This lightweight video tripod is designed for anyone who needs both stability and flexibility while on the move. With a maximum working height of 171 cm, individually adjustable tripod legs, and a smooth-operating 2-way video head, this tripod is the ideal companion for both amateur and advanced users.
Perfect for on-location shoots
Thanks to its low weight of just 2 kg and compact transport length of approx. 70 cm, the Bresser TR-688V is easy to take along on hikes, outdoor shoots, or trekking tours. The sturdy handle provides additional carrying comfort, and the hook under the center column allows you to hang a counterweight or camera bag for added stability.
Professional functionality
The quick-release plate and stepless height adjustment from 63.5 to 171 cm make it easy to work quickly and vibration-free. Ideal for video recordings, but also suitable for photography or use with a lighter spotting scope. Thanks to the 2-way panhead, you can position your camera precisely and follow movements smoothly – ideal for dynamic shots or tracking subjects.
FEATURES
Suitable for video and photo, also for lighter spotting scopes
2-way panhead for smooth horizontal and vertical movements
Load capacity: up to 3 kg
Stepless height adjustment: 63.5 – 171 cm
Individually adjustable tripod legs with quick-release clamps
Folds down compactly to just 70 cm
Weight: approx. 2 kg
INCLUDED IN DELIVERY
Bresser TR-688V tripod with 2-way video head
Quick-release plate
Carrying bag with shoulder strap
BRESSER B-11 large Metal Studio Clamp
€3.75*
This universal clamp can be attached to a shooting table, a shelf or a desk. Also very suitable to fix background paper and cloth.FEATURESsturdy metal clampstrong metal springremovable rubber lipswidth: 9 cmmax. opening: 6 cm SCOPE OF DELIVERY1x studio clamp
BRESSER Weighted Bar for Paper Backgrounds
€19.95*
Paper backgrounds often tend to roll up at the bottom end. This BRESSER weighted bar is designed to stop the paper from moving and ensure a tight background for your photographs.
Simply attach the weighted bar to the end of the paper roll with the adhesive tape provided. Small spirit levels on both sides of the bar help to ensure that the background is mounted in a level position.
FEATURES
280 cm long bar for weighting paper backgrounds
Prevents unwanted rolling
Spirit levels on both sides to ensure level installation
Collapses into 3 parts for transport and storage
WHAT’S INCLUDED
3-part weighted bar
Adhesive tape
BRESSER BR-10 Metal Studio Clamps 5 pieces
€12.50*
This universal clamp can be attached to a shooting table, a shelf or a desk. Also very suitable to fix background paper and cloth.FEATURESsturdy metal clampstrong metal springremovable rubber lipswidth: 8 cmmax. opening: 6 cm SCOPE OF DELIVERY5x studio clamp
BRESSER B-RS-180 Trolley for ceiling rail system
€11.00*
With the BRESSER B-RS 180 trolley, the BRESSER CR-1 ceiling rail system can be extended to attach further photo studio accessories or pantographs.The metal bracket allows the trolley to be pushed into position on the rails and serves as a damper and brake.PROPERTIESSpigot adapter for various accessoriesDamper with metal bracketVariable useMaximum felxibilty thanks to the spigot adapterSCOPE OF DELIVERYSingle trolley for ceiling track
BRESSER BR-BS1 Sandbag Counterweight
€9.50*
This sandbag ​can be filled with sand or weights and be hung on a boom arm. It also can be used to weigh down a light stand in order to give it more stability.FEATURESfillable sandbag2 separate compartmentscounterweight for boom armsdimensions (open): 45 x 24 cmSCOPE OF DELIVERY1x sandbag1x carabiner
BRESSER BR-B98 Padded Studio Bag 98 x 29 x 29cm
€38.00*
Well-packed and quickly shouldered - here everything finds its placeThe BRESSER BR-B98 studio bag is a perfect and handy companion for photo studio equipment with variable inner walls. The high-quality material ideally protects sensitive photo studio equipment such as lamp tripods, flash heads and studio umbrellas from dust and light moisture. Everything can be quickly stowed and shouldered in the well-padded transport bag with its large opening and parallel zip.There is enough space in the outer compartment for smaller accessories such as cables, filters or radio triggers. With the adjustable tension straps of the BRESSER BR-B98 studio bag, everything can be lashed down securely, even if the space is not fully used.FEATURES
Large, spacious carry bag for studio equipment
Parallel zip with large opening for easy packing and unpacking
Fully padded
Includes dividers (24 x 24 cm) to create separate inner compartments
Additional exterior compartment for small accessories
Handles and length-adjustable shoulder strap
Integrated compression straps
Made from water-repellent nylon
WHAT’S INCLUDED1x Studio bag
3x Dividers (24 x 24 cm)
BRESSER BR-TP400R Lightstand 400cm
€45.00*
A strong and stable aluminium light stand which can be folded easily to compact dimensions. There is an air suspension system in the tripod, which can stabilize any vibration caused by lowering the flash head. To prevent any reflection the aluminium is provided with a black powder coating.FEATURESaluminium light standair suspension system for shock absorptionblack powder coating to prevent undesired reflections adjustable height: 134 - 400 cmSCOPE OF DELIVERY 1x light stand1x spigot adapter (1/4" male, 3/8" male)
BRESSER TR-682AN Traveler Tripod 180 cm
€40.00*
Whether you're photographing in the city, exploring nature, or heading out on your next adventure – with the Bresser TR-682AN Traveler Tripod, you always have a sturdy, lightweight, and functional tripod at hand. The Bresser TR-682AN Traveler Tripod is the ideal choice for photographers and videographers looking for a compact, lightweight, and reliable tripod for on-the-go use. Thanks to its smart design, versatile features, and low weight of only 1.66 kg, this travel tripod is easy to take along on hikes, city trips, or trekking adventures.
Perfect for on-the-go – Compact and portable
With a folded length of just 71 cm and a comfortable grip, this tripod is perfect for mobile use. The included carrying bag provides extra convenience during transport.
Accurate positioning – 3-way pan head with bubble level
The 3-way pan head makes it easy to precisely position your camera or spotting scope – ideal for panoramic shots, video recordings, or wildlife observations. The built-in bubble level helps you set up the tripod evenly, even on uneven terrain.
Easy operation – Quick-lock clamps & Quick Release
Thanks to the quick release plate, you can securely and quickly mount your photo camera, video camera, or lightweight spotting scope. The quick-lock clamps on the three-section legs make adjusting the height fast and effortless.
Flexible height – Adjustable up to 180 cm
With the rotatable center column, you can precisely adjust the working height up to 180 cm – ideal for both low and high-angle shots.
FEATURES
Maximum load capacity: 2.7 – 5 kg
Maximum height: 180 cm
Folded size: 71 cm
Weight: 1,660 g
Leg segments: 3
Leg diameter: from Ø23 mm to Ø30 mm
Material: aluminum
SUITABLE FOR
Photo cameras
Video cameras
Spotting scopes (lightweight)
Compact telescopes
INCLUDED IN DELIVERY
Bresser TR-682AN Traveler Tripod
Quick release plate
Carrying bag
BRESSER BR-6 tiltable Support Clamp for collapsible Reflectors and Backgrounds
€12.00*
When there is no assistant around to hold the collapsible reflector for you during a photo shoot the BRESSER BR-6 clamp support offers the optimal solution. The metal clamp with a strong spring safely holds even larger reflectors. Thereby, the rubber lips protect the reflectors against any damages. This clamp is attached onto a tilt head, so you can position the reflector flexibly for an ideal illumination.The support clamp is equipped with a removable adapter with two different threads so it can be put onto any lightstand.FEATURESmetal clamp to attach collapsible reflectors to lightstandstilt headopening for studio umbrellasexchangeable tripod connectionSCOPE OF DELIVERYsupport clampspigot adapter (1/4" female, 3/8" female)
BRESSER JDD-9 LED Buzzel E27/1W Effect Spotlight for Product Images
€3.50*
While product photographers usually try to avoid light reflections, a purposeful set of sparkles can be deliberately used in articles such as watches and jewelery in order to lend the product pictures a certain shine.
FEATURES
spotlight with 18 LEDs
ideal for effective product photos of glossy articles such as watches, jewelery, etc.
fits into common versions with E27 thread
SCOPE OF DELIVERY
1x spotlight E27
BRESSER BR-16 Universal Clamp + Spigot Adapter
€5.00*
Universal clamp with a strong spigot adapter. The bracket can be clamped to a photo shooting table, shelf or table. Studio lamps or flashes with a tripod thread fit on the universal spigot adapter.FEATURESversatile clampstrong springreversible rubber lipsstable spigot adapter 1/4"max. opening: 6 cmsuitable for studio lights and flashesSCOPE OF DELIVERY1x Clamp with Spigot Adapter
BRESSER JM-10 Wall Bracket 6 cm
€9.50*
A strong wall bracket of metal, which can be mounted on the wall or the ceiling. You can put a flash head or other accessories on the spigot adapter.FEATURESuniversal wall bracketsize: 6 cm highspigot adapter 5/8" without threadSCOPE OF DELIVERY1x universal wall bracket
BRESSER BR-50 Multi Clamp Set 5 pieces
€11.50*
A practical, universal plastic clamp with a very strong spring to clamp background paper, background cloth or collapsible reflectors to a bar or a tube.With these clamps you can for instance prevent a background roll from unrolling. The clamps are provided with a movable top. This provides a stable fixation and uniform pressure on the object to be fastened.NOTE!These clamps are attached to the side of the background roll, the core of the roll or the crossbar of the background system (NOT onto the background roll itself)FEATURESBackground clamp made of plasticadjustable topLength: ca. 12 cmOpening: ca. 4 cmSCOPE OF DELIVERYMulti clamps 5 pieces
BRESSER Pantograph for Ceiling Rail System
€99.00*
The BRESSER Pantograph is suitable for extending the BRESSER ceiling rail system or for fixed ceiling mounting with corresponding, optionally available accessories. Photo studio equipment, photo studio flashes, photo studio daylight lamps and also LED lights and panel lights are attached to the pantograph with an extension range of 40 - 200 cm using the spigot adapter included in the scope of delivery.A trolley for mounting on the ceiling rail system or single rails, as well as wire safety rope and cable guides, ensure a smooth workflow.FEATURES
Facilitates all photographic work in the studio
no interfering cables and tripods on the groundflexible working by sliding and pulling out scissorsExtension range of the scissors from approx. 40-200cmScissors can be loaded up to max. 6000gSCOPE OF DELIVERY1x Pantograph / shears for ceiling rail system1x Safety wire rope1x Spigot 5,5 cm/Ø 2 cm1x Trolley8x Cable clips
BRESSER BR-TP380 Heavy Duty Lightstand 380cm
€49.00*
A strong and sturdy aluminium lightstand which can easily be folded to a compact size. The lightstand is equipeed with an air suspension system, which prevents eventual shocks when lowering the flash head. The tripod comes with a detachable spigot adapter for the attachment of studio flashes and lamps. In order to reduce reflections the aluminium is provided with a black powder coating.FEATURESsturdy lightstand made of aluminiumair cushioning4 sectionsmax. height: 380 cmfolded height: 113 cmmax. thickness: 33 mmSCOPE OF DELIVERY1x lightstand1x detachable spigot adapter
BRESSER JM-01 Pipe Clamp 35mm
€12.00*
A strong pipe clamp made of metal which can be screwed onto a light stand thanks to the 3/8'' female thread on the lower side of the clamp. This way a crossbar with a thikness of 25 mm to 35 mm can be put onto the light stand.FEATURESsolid metal pipe clampdiameter: 25 - 35 mm3/8'' female thread on its lower sideSCOPE OF DELIVERY1x Pipe Clamp 35mm
