Specialised studio gear for all your projects

Be fully prepared for every photo and video shoot

Clamps, clips and adapters

BRESSER BR-10 Metal Studio Clamps 5 pieces

This universal clamp can be attached to a shooting table, a shelf or a desk. Also very suitable to fix background paper and cloth.FEATURESsturdy metal clampstrong metal springremovable rubber lipswidth: 8 cmmax. opening: 6 cm SCOPE OF DELIVERY5x studio clamp

€12.50*

BRESSER B-11 large Metal Studio Clamp

This universal clamp can be attached to a shooting table, a shelf or a desk. Also very suitable to fix background paper and cloth.FEATURESsturdy metal clampstrong metal springremovable rubber lipswidth: 9 cmmax. opening: 6 cm SCOPE OF DELIVERY1x studio clamp

€3.75*

BRESSER BR-65 Tighteners for Background Cloths - Set of 10pcs.

This set of 10 BRESSER BR-65 tighteners for cloth backgrounds attaches to background systems via a hook and loop fastener. A small clip is attached to the cloth background, which can then be tightened with the elastic band. The tighteners ensure that your background is kept tight and crease-free. The set includes a total of 10 tighteners. FEATURES 10 tighteners Attaches to background system with hook and loop fastener Small clips for holding the cloth background Cloth background is tightened via elastic band Rubber band min. 20 cm long WHAT’S INCLUDED 10x tighteners

€14.50*

BRESSER JM-34 Double Pipe Clamp 35 mm and 50 mm

A strong double metal pipe clamp. This pipe clamp can connect 2 pipes with different thicknesses to each other. They stand at an angle of 90 degrees to each other.FEATURESsturdy double pipe clampconnection of two pipes in an 90° anglesuitable for pipe diameters: 25 - 35 mm and 35 - 50 mmSCOPE OF DELIVERY1x double pipe clamp

€26.00*

BRESSER BR-56 Background Clamp Deluxe

A practical, universal plastic clamp with a very strong spring to clamp background paper, background cloth or collapsible reflectors to a bar or a tube. With this clamp you can for instance prevent a background roll from unrolling. The clamps are provided with a movable top. This provides a stable fixation and uniform pressure on the object to be fastened.NOTE!These clamps are attached to the side of the background roll, the core of the roll and the crossbar of the background system (NOT onto the background roll itself)FEATURESplastic background clampmovable toplength: +/- 16.5 cmopening: +/- 6.5 cm weight: 100 gSCOPE OF DELIVERY1x background clamp

€4.75*

BRESSER Background Clamp

A handy and universal metal clamp to attach background paper, background cloth or collapsible reflectors to a rod or pipe. With this clamp you can for instance prevent a background roll from unrolling. NOTE!These clamps are attached to the side of the background roll, the core of the roll and the crossbar of the background system (NOT onto the background roll itself)FEATURESsolid metal background clamplength: ca. 15 cmopening: ca. 5,5 cmweight: 70 gSCOPE OF DELIVERY1x background clamp

€8.50*

BRESSER BR-16 Universal Clamp + Spigot Adapter

Universal clamp with a strong spigot adapter. The bracket can be clamped to a photo shooting table, shelf or table. Studio lamps or flashes with a tripod thread fit on the universal spigot adapter.FEATURESversatile clampstrong springreversible rubber lipsstable spigot adapter 1/4"max. opening: 6 cmsuitable for studio lights and flashesSCOPE OF DELIVERY1x Clamp with Spigot Adapter

€5.00*

BRESSER BR-53 Background Clamp DE LUXE 3" (5 pieces)

A practical, universal plastic clamp with a very strong spring to clamp background paper, background cloth or collapsible reflectors to a bar or a tube. With this clamp you can for instance prevent a background roll from unrolling. The clamps are provided with a movable top. This provides a stable fixation and uniform pressure on the object to be fastened.NOTE!These clamps are attached to the side of the background roll, the core of the roll and the crossbar of the background system (NOT onto the background roll itself)FEATURESplastic background clampmovable toplength: +/- 10 cmopening: +/- 4 cm weight: 25 gSCOPE OF DELIVERY5x background clamp

€11.00*

BRESSER BR-6 tiltable Support Clamp for collapsible Reflectors and Backgrounds

When there is no assistant around to hold the collapsible reflector for you during a photo shoot the BRESSER BR-6 clamp support offers the optimal solution. The metal clamp with a strong spring safely holds even larger reflectors. Thereby, the rubber lips protect the reflectors against any damages. This clamp is attached onto a tilt head, so you can position the reflector flexibly for an ideal illumination.The support clamp is equipped with a removable adapter with two different threads so it can be put onto any lightstand.FEATURESmetal clamp to attach collapsible reflectors to lightstandstilt headopening for studio umbrellasexchangeable tripod connectionSCOPE OF DELIVERYsupport clampspigot adapter (1/4" female, 3/8" female)

€12.00*

BRESSER Weighted Bar for Paper Backgrounds

Paper backgrounds often tend to roll up at the bottom end. This BRESSER weighted bar is designed to stop the paper from moving and ensure a tight background for your photographs. Simply attach the weighted bar to the end of the paper roll with the adhesive tape provided. Small spirit levels on both sides of the bar help to ensure that the background is mounted in a level position. FEATURES 280 cm long bar for weighting paper backgrounds Prevents unwanted rolling Spirit levels on both sides to ensure level installation Collapses into 3 parts for transport and storage WHAT’S INCLUDED 3-part weighted bar Adhesive tape

€19.95*

BRESSER BR-56 Background Clamp DeLuxe (4pieces)

€14.00*

BRESSER BR-56 Background Clamp Deluxe 6pcs.

€27.00*

BRESSER JM-01 Pipe Clamp 35mm

A strong pipe clamp made of metal which can be screwed onto a light stand thanks to the 3/8'' female thread on the lower side of the clamp. This way a crossbar with a thikness of 25 mm to 35 mm can be put onto the light stand.FEATURESsolid metal pipe clampdiameter: 25 - 35 mm3/8'' female thread on its lower sideSCOPE OF DELIVERY1x Pipe Clamp 35mm

€12.00*

BRESSER BR-52 Studio Clamp 6,5cm DeLuxe 5 pieces

The universal plastic studio clamps are very handy and have a very strong spring. The clamps can be used versatily in the photo studio, e.g. for the attachment of paper or vinyl to a table and for the securing of small accessories, rods or reflectors. There are moveable red clamp jaws at the end of the clamps which results in a secure grip and an equal pressure on the clamped object.FEATURESstrong springmoveable clamp jawssize: 6.5 x 5.5 cmopening (max.): 3 cmweight: 8 g eachSCOPE OF DELIVERY5x studio clamp 6.5 cm

€6.00*

BRESSER JM-01 Pipe Clamp 35mm - Set of 3 Pieces

€29.95*

BRESSER BR-13 U-Clamp with 1/4'' Thread

The U-clamp can be attached to a shooting table, a shelf or tables and a tube or rod. Photo accessories can be attached either directly or via an additional adapter using a 1/4'' thread. FEATURES Solid metal U-clamp Maximum opening: 4 cm 1/4'' connection thread SCOPE OF DELIVERY 1x U-clamp

€13.50*

BRESSER BR-26 Pipe Clamp with Ball Head

Universal pipe clamp with a ball head. The pipe clamp can be clamped on a tube of a tripod or background support. On the ball head fits a small lamp or a flash with tripod connector.

€8.75*

BRESSER BR-50 Multi Clamp Set 5 pieces

A practical, universal plastic clamp with a very strong spring to clamp background paper, background cloth or collapsible reflectors to a bar or a tube.With these clamps you can for instance prevent a background roll from unrolling. The clamps are provided with a movable top. This provides a stable fixation and uniform pressure on the object to be fastened.NOTE!These clamps are attached to the side of the background roll, the core of the roll or the crossbar of the background system (NOT onto the background roll itself)FEATURESBackground clamp made of plasticadjustable topLength: ca. 12 cmOpening: ca. 4 cmSCOPE OF DELIVERYMulti clamps 5 pieces

€11.50*

BRESSER BR-SC021 Multi Clamp with 12 kg Load Capacity

Flexible attachment options for greater freedom in the studio or when shooting on location – wherever there is insufficient space for a tripod. The solid, metal multi clamp allows you to securely attach your studio lamps, weighing up to 12 kg, or other accessories to table panels, shelves or pipes with a diameter of 2 to 10 cm. FEATURES Robust metal multi clamp Three 5/8’’ spigot adapter, one with ¼’’ threaded screw Maximum load capacity: 12 kg For attachment to poles, posts, pipes with a diameter of 2 to 10 cm WHAT’S INCLUDED 1x multi clamp

€35.00*

BRESSER JM-31 Screw Clamp

A strong metal screw clamp with 5/8" spigot adapter, which can easily be attached to the tube of tripod or a crossbar. On the lower side there is a 1/4" thread, on the backside a 3/8" thread. This screw clamp can be attached to pipes of a diameter up to 4.5 cm.FEATURESmetal screw clampmax. opening: 4.5 cm5/8" roundhead 1/4" and 3/8" threadSCOPE OF DELIVERY1x screw clamp

€19.50*

BRESSER JM-34 Double Pipe Clamp 35 mm

A strong double metal pipe clamp. With this pipe clamp you can connect 2 pipes at an angle of 90 degrees to each other.FEATURESsturdy double pipe clampconnection of two pipes in an 90° anglesuitable for pipe diameters: 25 - 35 mmSCOPE OF DELIVERY1x double pipe clamp

€21.00*

BRESSER BR-8 Pipe Clamp with Clamp

The pipe clamp can be screwed onto a tube with a maximum diameter of 3.5 cm, like the tube of a lightstand. With help of the clamp one can for example attach a collapsible reflector or other studio accessory. Very easy to use and versatile.FEATURESsolid pipe clamp with clamp made of metallstrong springmax. tube diameter: 3.5 cmclamp width: 7.5 cmmax. clamp opening: 5.5 cmremovable rubber lipsSCOPE OF DELIVERY1x pipe clamp with clamp

€8.75*

BRESSER BR-11 large Metal Studio Clamp 5 pieces

This universal clamp can be attached to a shooting table, a shelf or a desk. Also very suitable to fix background paper and cloth.FEATURESsturdy metal clampstrong metal springremovable rubber lipswidth: 9 cmmax. opening: 6 cm SCOPE OF DELIVERY5x studio clamp

€16.00*

Details

BRESSER BR-14 solid metal tube clamp

A solid metal tube clamp for attaching accessories. FEATURES Height: 14.5 cm Width: 9,5 cm Opening: 5,5 cm

€29.50*

Details