The universal BRESSER BR-141 smartphone holder is designed for devices with a width of 5 to 15 cm. The smartphone clamps into the adjustable holder and can be turned to the desired position. The strong and sturdy clamp on the other side allows the holder to be attached to a table, shelf or bar. The maximum load is 400 g.
FEATURES
Fully flexible and adjustable smartphone holder
Designed for devices with a width of 5 to 15 cm
400 g maximum load
Strong clamp for securing the holder to a table, shelf or bar
WHAT’S INCLUDED
1x smartphone holder
Whether in the photo or film studio, or for camping and leisure, the BRESSER BR-21 gooseneck is always a good helper for attaching photo studio accessories and other utensils. With two different clamps, the flexible arm is quickly and flexibly attached to table tops or tripos.The stable and flexible component has a total length of 43 cm and can be stowed away quickly to save space. Books, reflectors, microphones, leisure equipment and much more - there is hardly anything that the BRESSER Gooseneck cannot hold. The rubberised screw clamp with an opening of 0,5 to 3,5 cm can also be mounted on tubes and rods, microphone stands or lamp tripods. The rubberised spring clamp with its robust width of 7,5 cm has a maximum opening of 5 cm. Conveniently, the BRESSER BR-21 can also be used in reverse. The spring clamp can be used as a table clamp and screw clamp can be used as a holder for tubes, rods ect.NOTE: The load capacity of approx. 1-2 kg depends on the angle of inclination and may therefore vary.PROPERTIESFlexible bendable arm 43 cm/ Ø 15 mmTotal length: 62 cmMetal clamp with strong spring on one side, screw clamp on the other sideRemoveable rubber lipsSpring clamp opnening: max 5,5 cmClamp width: 7,5 cmTube clamp width: 4 cm/ length: 5 cmScrew clamp opening: 0,5 cm - 3,5 cmLoad capacity: max 1-2 kg, depending on angle of inclinationSCOPE OF DELIVERY1x BRESSER BR-21 Flexarm
Whether in the photo or film studio, for camping or leisure activities, the BRESSER BR-20 gooseneck is always a good helper for attaching photo studio accessories and other utensils. With two sturdy spring clamps, the flexible arm is quickly and flexibly attached to table tops or tripods.The flexible part measures 43 cm in length and with a total length of 64 cm, the gooseneck can be quickly stowed away to save space. Books, reflectors, microphones, leisure equipment and much more - there is hardly anything that the BRESSER BR-20 Gooseneck will not hold. The rubberized spring clips with a width of 7,5 cm and an opening of up 5 cm can also be attached to tubes and rods, microphone stands and lamp tripods.NOTE: The load capacity of up to 1 kg depends on the angle of inclination and may therefore vary.PROPERTIESFlexible bendable arm: 43 cm/ Ø 15 mmTotal length: 64 cmRemovable rubber lipsSpring clamp opening: max. 5,5 cmClamp width: 75 mmLoad capacity: max. 1 Kg, dependig on angle of inclinationSCOPE OF DELIVERY1x BRESSER BR-20 Flex Arm
The practical BRESSER JM-46 lamp holder is suitable for both ceiling and wall mounting. A useful solution for confined spaces or small film or photo studios. The telescopic extension from 37 to 60 cm provides flexibility in lightning. The two-sided spigot connection with a 1/4" and a 3/8" thread makes it easy to attach LED panel lights, photo studio flashes, daylight lamps, monitors and also photo and video cams.PROPERTIESCeiling/ Wall lamp mountTelescopic extension from 37 to 54 cmSturdy mounting plate: 12 x 8 cm1/4" and 3/8" spigot connectionSCOPE OF DELIVERY1x BRESSER JM-46 wall arm1x Spigot adapter
With the flexible BRESSER BR-145 you just clamp the gooseneck to a table, bed or tripod and place the tablet, eBook or smartphone in the holder provided and have your hands free to film, to read or watch videos. Very popular with musicians to read notes and song lyrics on the tablet, when cooking to be able to follow recipes or videos instructions. The BRESSER BR-145 is used for simplified video conferencing and cool videos or photos by bloggers and vloggers. This gadget offers countless possibilities for use in leisure time as well as on the job. Sturdy yet flexible, the maximum carrying capactiy is 400g, and it fits in any pocket.PROPERTIESSuitable for smartphones/ tablets with a width of 12.5 to 25.5cmIndividually adjustableWith ball jointStable clamp for attachmentMaximum load capacity of 400gSCOPE OF DELIVERY1x Gooseneck tablet holder
A strong wall bracket of metal, which can be mounted on the wall or the ceiling. You can put a flash head or other accessories on the spigot adapter.FEATURESuniversal wall bracketsize: 6 cm highspigot adapter 5/8" without threadSCOPE OF DELIVERY1x universal wall bracket
The robust BRESSER BR-23B gooseneck can be quickly and easily attached anywhere to tables, tubes and tripods using the tube clamp. On the screwed-in spigot connection with a 1/4" screw thread, various daylight lamps can be mounted from LED lamps, panel lamps, light photo studio flashes. In addition, mini LED lights etc. can also be screwed on. The flexible part of the gooseneck has a length of 43 cm and has a load capacity of approx. 1 - 2 kg, taking into account the angle of inclination. With its total length of 59 cm, the practical BRESSER BR-23 gooseneck can be quickly stowed away in the photo studio equipment to save space.NOTE: The load capacity of approx. 1 - 2 kg depends on the tilt angle and may therefore vary.
FEATURESFlexible bendable arm: 43 cm/ Ø 15 mm
Total length: 59 cmScrew clamp opening (maximum): 35 mmScrew/ tube clamp: W: 4 cm x L: 7,5 cm x D: 6cmLoad capacity: max 1 - 2 kg, depending on angle of inclination
SCOPE OF DELIVERY
FlexarmSpigot adapter (1/4'' male / 3/8'' male)
The robust BRESSER BR-23 gooseneck can be quickly and easily mounted anywhere on tables or boards. LED lights, panel lights, light photo studio flashes and various daylight lights can be mounted on the screwed-in spigot connection with a 1/4" screw thread. In addition, mini LED lights etc. can also be screwed on. The flexible part of the gooseneck has a length of 44 cm and has a load capacity of approx. 1 - 2 kg, taking into account the angle of inclination. With its total length of 60 cm, the practical BRESSER BR-23 gooseneck can be stored quickly and space-saving in the photo studio equipment.Note: The load capacity of approx. 1-2 kg depends on the tilt angle and may therefore vary.PROPERTIESFlexible, bendable arm: 43 cm/ Ø 15 mmRubberised spring clamp with strong spring1/4" spigot adapterClamp opening: max. 55 mmClamp width: 80 mmLoad capacity: 1- 2 kgSCOPE OF DELIVERY1x Flex arm1x Spigot 2,5 cm
With the 32 cm long flexible arm with spigot adapter and spigot connection for mounting on lamp tripods, you get more flexibility for the alignment of photo studio accessories in a very uncomplicated way. Simply bring a ring light, LED surface light, daylight light or your camera into the right position with the stable Gooseneck, which can be loaded up to 2 kg. With the included spigot, both the 1/4" or 3/8" can be used to screw on accessories. The other side of the gooseneck is simply mounted on a lamp tripod with spigot.PROPERTIES
Very sturdy gooseneckTotal length: 32 cmLoad capacity: 2 kgBoth ends and sides with 5/8" openingsIncludes 1/4" and 3/8" spigot adapters (6,5 cm long without thread)SCOPE OF DELIVERY1x Gooseneck1x Spigot adapter (1/4" male, 3/8" male)
A strong Wall Bracket of metal, which can be mounted on the wall or the ceiling. You can put a flash head or other accessories on the Spigot Adapter.FEATURESUniversal Wall Bracketsize: 12.5cm highSpigot AdapterSCOPE OF DELIVERY1x Universal Wall BracketSpigot Adapter
A gooseneck with a length of 56 cm and a diameter of 18 mm. There is an 1/4" male thread on the one side and a 3/8" female thread on the other side. Hence, this gooseneck is perfect for connecting various accessories to each other.FEATURESstable gooseneckflexible connection of different accessoriesmale thread: 1/4"female thread: 3/8"SCOPE OF DELIVERYgooseneck 56 cm
A strong wall mount made of metal, which can be attached to a wall or the ceiling. On its spigot adapter a flash head or other studio accessories can be fixed.FEATURESstable metal bracket length: 16.5 cm 5/8" round head spigot adapterSCOPE OF DELIVERY1x wall bracket
The 121 cm long swivel arm with two hinges consists of two solid metal bars, each of which is 60.5 cm long.You can therefore choose to use only the front bar, which is equipped with a spigot adapter with a 1/4 external thread and one hinge.The swivel arm can be secured to a lamp stand with a spigot adapter and used as an extension or a boom arm. Thanks to the multi clamp that can support loads of up to 12 kg, it can also be secured to tabletops, shelves and pipes with a diameter of 2-10 cm.FEATURES OF SWIVEL ARMTwo-section swivel arm, can also be used individually2 hinges, adjustable in steps with safety latchCan be used as extension or boom arm for lamp standsSpigot adapter with 1/4 external threadSolid metal, 28 mm in diameterLoad capacity: 2.5 kgTotal length without spigot adapter 121 cmFEATURES OF MULTI CLAMPRobust metal multi clampThree 5/8 spigot adapter, one with 1/4 threaded screwMaximum load capacity: 12 kgFor attachment to poles, posts, pipes with a diameter of 2 to 10 cmDELIVERY CONTENT2-section swivel arm 1 multi clamp
€79.00*
Cookies
We use cookies to personalize and improve content and services, deliver relevant advertising, and provide a secure experience. You can review your cookie controls at any time. Learn more about the use and control of cookies in our Cookie Policy.
Functional cookies are absolutely necessary for the functionality of the web shop. These cookies assign a unique random ID to your browser so that your unhindered shopping experience can be guaranteed over several page views.
Google Pay payments
Amazon Pay
Stripe orig props:
Stripe referrer information.
Private machine identifier cookie:
Security token to identify the private machine.
Site auth:
Stripe authentication cookie.
Stripe csrf:
CSRF token.
PayPal payments
Cookie settings:
The cookie is used to store the cookie settings of the site user over several browser sessions.
Information on origin:
The cookie stores the referrer and the first page visited by the user for further use.
Payment provider (Stripe) session
Timezone:
The cookie is used to provide the system with the user's current time zone.
CAPTCHA integration
Payment provider (Stripe) session
Stripe:
The cookie is used by the payment provider to increase security when processing payments on the website.
Cache handling:
The cookie is used to differentiate the cache for different scenarios and page users.
Session:
The session cookie stores your shopping data over several page views and is therefore essential for your personal shopping experience.
Payment provider (Stripe) fraud prevention
Payment provider (Stripe) fraud prevention
CSRF token:
The CSRF token cookie contributes to your security. It strengthens the security of forms against unwanted hacker attacks.
Google Tag Manager debug mode:
Allows to run the Google Tag Manager in debug mode.
Activated cookies:
Saves which cookies have already been accepted by the user for the first time.
YouTube video
Location maps:
We use OpenStreetMap as tile provider to show you visually the location of our stores and merchants.
Recently viewed products:
The cookie stores the most recently viewed products in order to suggest them on further product pages.
Wishlist
Customers also viewed:
The cookie stores the most recently viewed products in order to suggest them to other customers on product pages.
Cookies used for statistics and shop performance metrics.
Conversion and usertracking via Google Tag Manager
Google Tag Manager:
Cookie from Google to control the advanced script and event handling.
Google Analytics:
Cookie from Google for website analysis. Generates statistical data about how the visitor uses the website.
Tracking cookies help the shop operator to collect and evaluate information about the behaviour of users on their website.
Matomo Tracking:
Tracking statistics for the optimization of user workflows. No personal data is stored.
Google Analytics:
Google Analytics is used for traffic analysis of the website. Thereby statistics about website activities can be created and read out.
Marketing cookies are used to display advertisements on the website in a targeted and individualized manner across multiple page views and browser sessions.
Google Advertising
Google Ads:
Advertising Targeting
Google AdSense:
The cookie is used by Google AdSense to promote advertising efficiency on the website.
Google conversion tracking:
The Google Conversion Tracking Cookie is used to track conversions on the website effectively. This information is used by the site operator to target Google AdWords campaigns.