This high-performance outdoor temperature and humidity sensor is the perfect extension for your BRESSER weather station. The sensor transmits measurement data over an ultra-long wireless range of to 150 metres at a frequency of 868 MHz. There are seven different wireless channels available to choose from. Thanks to the built-in display, you can also use the precision thermo-hygro sensor as a standalone solution without a weather centre.
Compatible with the following BRESSER weather stations:
7003200, 7003210, 7003220, 7003230, 7002580, 7002585, WSX1001, 7902535, 7902534, 7002541, WSX3001, 7003500, 9080600, 7002586, 7006300, WSH4102, 7003600, 7003300, 7003510, WSX5003, 7003100
FEATURES
Temperature measurement function
Humidity measurement function
7 available channels
Built-in display, can also be used as a standalone solution without a weather centre
Temperature range: -20 ~ 60℃
Wireless frequency: 868 MHz
Ultra-long range of up to 150 m
Battery-operated with 2x AA batteries (not included)
DELIVERY CONTENT
Outdoor sensor
Instruction manual
Remote sensor for measuring of temperature and humidity. Seven channels settable. With extra long radio range of 150 meters on a radio frequency of 868 MHz.
Good news for Smarthome owners: The sensor can be connected to the system of the market leader Tuya.
Suitable for the following BRESSER weather stations: 7902535, 7002541, WSX3001, 7003500, 9080600, 7002586, 7006300, WSH4102, 7003600, 7003300, 7003230, 7003210, 7003200, 7003220, 7003510, WSX5003, 7002531, 7002571, 7003100
Compatible with the following BRESSER weather stations, but exclusively with firmware version V1.11 or higher (download available on the product page of the BRESSER homepage): 7002580, 7002581 und 7002585/WSX1001
FEATURES
Temperature measuring
Humidity measuring
7 channels settable
RC frequency: 868 MHz
Extra long radio range of 150 meters!
Suitable for smarthome systems by Tuya
Powered by battery; 2x AA (LR6) (not included!)
SCOPE OF DELIVERY
Remote sensor
Falling under the car when moving, taking a knock from a child's football, simply slipping from your hand during installation - even the most robust 7-in-1 wireless sensor is not immune to everyday misadventure. But, even if your outdoor sensor is permanently damaged beyond repair, there's no need to buy a whole new weather station simply to keep an eye on the weather. Your base station can continue to function perfectly. This sensor is the perfect replacement part for your 4-day 4CAST WiFi weather centre. The device is operated in much the same way as you are used to: Start by inserting the batteries (not included). Then, fit the replacement sensor in your preferred location using the installation material supplied. Once everything has been tightened up, all you need to do is connect to your base station (not included). With a replacement sensor, this is not an automatic process; you will needed to press the WiFi/SENSOR button on the console. The console will then start to search for the signal from the sensor. Connected? Then you're done, and you can start enjoying up-to-date and local weather data from your sensor for outdoor temperature and humidity, wind speed, wind direction, precipitation, UV level and light intensity.
Rehabilitate your 4-day 4CAST WiFi weather centre with the replacement sensor.
FEATURES
Measures the temperature and humidity
Measures the wind speed, wind direction and rainfall
Measures the UV level and light intensity
Solar power for longer battery lifespan
Range: up to 150 m
Power supply: 3x AA batteries (not included)
Dimensions: 420 x 170 x 213 mm
DELIVERY CONTENT
Wireless sensor with installation material
Base station not included!
Instruction manual
Living room, bedroom and children's room, kitchen and of course the bathroom - all benefit from a regular room climate check to ensure optimal comfort. So, enhance your weather station with this BRESSER Thermo-Hygro Sensor, allowing you to monitor conditions at an additional location. The sensor sends data over a significant distance of up to 80 meters, instantly displaying it on your base station's screen.
Wondering if it's really that warm? The sensor includes an LCD display for immediate, on-site verification of current readings. This feature also enables this temperature and humidity meter to function as a standalone thermo-hygrometer.
Compatible with these BRESSER weather stations:
7000023, 7007201, 7004200, 9604200, 7007511, 9600028, 7000012CM3000, 7000012GYE000, 7000013, 9070600, 7000028, 7007402, 9070700, 9604210, 7004210, 7006500, 9604100, 9070300, 9070110, 7007520, 9070710, 7000030, 7007610, 7000002, 7000004, 7000020QT5000, 7000020CM3000, 7000020GYE000, 7001800QT5000, 7001800CM3000, 7001800GYE000, 7007550CM3000, 7007600QT5000, 7000022CM3000, 7007500, 7007501, 9080600, 8020210GYE000, 8020210CM3000, 7004330, 7004340, 7006310, 7000020QT5000, 7000020CM3000, 7000020GYE000, 7004220, 7000027, 7000029, 7000060, 7004350, 7004360, 7004370, 7004380, 7006510, 7007350, 7007620, 7000012CM3000, 7000012GYE000
FEATURES
Measures temperature and humidity
Easy-to-read LCD display
Functions as an independent solution, or as a replacement or supplementary sensor for select BRESSER weather stations
Maximum range of up to 80 meters
IP Protection Class: IP44
Dimensions: 71 x 65 x 23 mm / weight: 44 g
Powered by 2x 1.5V AAA batteries (not included)
SCOPE OF DELIVERY
Thermo-Hygro Sensor
Instruction manual
This additional sensor allows you to take two additional practical measurements with your BRESSER weather station. In addition to the soil temperature, the sensor can also measure the soil moisture – ideal for plant lovers and gardeners. Measurements are sent to the base station at 60 second intervals. The soil moisture meter can be positioned up to 150 metres away from the base station. There are also 7 different channels to choose from. And thanks to the weatherproof housing, the wireless sensor is able to withstand adverse weather conditions.
Compatible with the following BRESSER weather stations:
7003200, 7003210, 7003220, 7003230, 7002580, 7002585, WSX1001, 7902535, 7902534, 7002541, WSX3001, 7003500, 9080600, 7002586, 7006300, WSH4102, 7003600, 7003300, 7003510, WSX5003, 7003100
FEATURES
Wireless and compact soil sensor
Measures the soil humidity
Measures the soil temperature
Transmission interval: 60 seconds
Extra-long range of up to 150 metres
7 available channels
LED indicator for data transmission
Weatherproof housing
Battery-operated with 2x AA batteries (not included)
DELIVERY CONTENT
Soil sensor
Instruction manual
Want to cool off in your pool? This wireless and floating pool thermometer from BRESSER will tell you whether the water is at an optimal temperature. Measurements are shown on the built-in LCD display. You can also connect the pool thermometer to your BRESSER weather centre so that you can check the pool temperature from the comfort of your own home.
The pool sensor is compatible with the following BRESSER weather stations:
7003200, 7003210, 7003220, 7003230, 7002580, 7002585, WSX1001, 7902535, 7902534, 7002541, WSX3001, 7003500, 9080600, 7002586, 7006300, WSH4102, 7003600, 7003300, 7003510, WSX5003, 7003100, 7002531
FEATURES
Floating pool sensor for measuring the water temperature
LCD display for displaying the temperature (°C/°F)
Wireless frequency: 868 MHz
Wireless transmission range of up to 30 m to optional base station
7 available channels
Waterproof (IPX7)
Powered by 2x AA batteries (not included)
DELIVERY CONTENT
Pool thermometer
Instruction manual
BRESSER Thermo/Hygro RC transmitter, compatible with all weather stations with 433 MHz transmission frequency.This sensor is compatible with the following articles:7001001, 7001030, 7001101, 7002500, 7003101, 7004000, 7004001, 7004002, 7004110, 7004250, 7004300, 7004301, 7007000, 7007300QT5000, 7007300CM3000, 7008000, 7008001, 7009000.The appropriate outdoor sensor for other weather stations can be found under the article numbers 7009994, 7009995 or 7009996.
It's easily done: you've just moved house and want to move your 7-in-1 professional sensor for your BRESSER Wi-Fi Comfort weather centre to a new location. While attempting to move the sensor, you accidentally drop it and the sensor stops working. If this sounds like you, this 7-in-1 wireless sensor is just what you need for your weather station. The setup is the same as usual: simply insert the batteries (not included) and install your replacement sensor in the desired location using the mounting materials provided. Once you've installed the sensor, all you need to do is connect it to your existing base station (not included). Simply press the Wi-Fi/Sensor button on the base station, and the base station will search for the signal from your new outdoor sensor. The two devices will then automatically connect to each other. The local data from your sensor, including the outdoor temperature, humidity, wind speed, wind direction, rainfall, UV level and light intensity will appear on your elegant colour display.
Restore full functionality to your Wi-Fi Comfort weather centre with the 7-in-1 replacement sensor.
FEATURES
Replacement wireless sensor, transmits data to the Wi-Fi Comfort weather centre
Measures the outdoor temperature and outdoor humidity
Measures the wind speed, wind direction and rainfall
Measures the UV level and light intensity
Transmission range of up to 150 metres
Place in an unobstructed location in order to obtain accurate sunlight and rain data
Power supply: 3x AA batteries (not included)
DELIVERY CONTENT
Wireless sensor
Mounting materials
Base station is not included!
Instruction manual
The BRESSER lightning detector keeps you informed during stormy weather. It displays a light signal when it detects a lightning strike within a range of approximately 40 kilometres. To get the most out of the lightning detector, you can connect it to your BRESSER weather centre: from there, you can view the time since the last lightning strike, including the estimated distance, as well as the number of lightning strikes per hour. And to ensure that the lightning sensor is configured to your surroundings, you can choose from 3 different sensor sensitivity levels.
The lightning detector is compatible with the following BRESSER weather stations:
7003210, 7003220, 7003230, 7003240
FEATURES
Lightning sensor for measuring lightning strikes
Displays a light signal when a lightning strike is detected
The following data can be viewed when connected to a compatible BRESSER weather centre:Time since last lightning strike, including estimated distanceNumber of lightning strikes per hour
LED indicator for data transmission
Range of up to 100 metres
Adjustable sensor sensitivity (high/medium/low)
Power supply: 2x AA batteries (not included)
DELIVERY CONTENT
Lightning sensor
Instruction manual
One moment of inattention and it’s happened: The 7-in-1 solar outdoor sensor of your 4CAST PRO weather station by BRESSER didn't survive the move or the installation at its new location. A replacement is needed! However, since the base station is still working perfectly, you don’t want to buy a whole new weather station. That’s why this 7-in-1 solar wireless sensor is the spare part you’re looking for. You can install it as usual: Simply fit the wind vane and the rain gauge funnel, insert backup batteries, and—most importantly—position the solar panel according to your location. Only with the perfect spot in the sun will eco-friendly solar power flow all year round for reliable weather measurements through your solar wireless sensor.
Once you’ve fixed the sensor in place and aligned it with the sun, you’re ready to connect it to the base station of your weather centre. The connection can be set up in no time: simply press the sensor/Wi-Fi button to enable synchronisation mode. Once the base station has paired with the sensor, your local measurements for the outdoor temperature, humidity, wind speed, wind direction, rainfall, UV level and light intensity will appear on the display.
Clear skies or adverse weather – restore full functionality to your 4CAST PRO weather centre with this replacement solar-powered sensor.
FEATURES
Powered via a large movable solar panel
In case of insufficient sunlight operation via 3x AA batteries (not included)
Measures the temperature and humidity
Measures the wind speed, wind direction and rainfall
Measures the UV level and light intensity
Power supply: solar panel, 3x AA batteries as back up (not included)
Range: up to 150 m
Dimensions: 390 x 174 x 465 mm
DELIVERY CONTENT
Solar-powered outdoor sensor
Mounting materials
Base station is not included!
Instruction manual
Has your 5-in-1 external sensor for your BRESSER WiFi colour weather centre succumbed to the impact of your child’s football or your last house move? Then it’s time for a replacement. And you don’t need to buy the whole product! This 5-in-1 external sensor is the perfect replacement part for your weather centre. It takes no time to install: Establish the power supply, take the mounting materials from the packaging and fit the wireless sensor at your preferred spot as normal. The existing base station will connect to the replacement external sensor automatically as normal. And if the two devices can’t find one another? You can manually intervene: Simply press the WiFi/SENSOR button on the base station and it will start to search for the new wireless sensor. Once connected, the local measured values for wind speed, wind direction, humidity, temperature and precipitation will be transmitted via 868 MHz to your colour display.
Good prospects again: Get the full functionality from your WiFi colour weather sensor again with the 5-in-1 external sensor.PLEASE NOTE: This outdoor sensor is only compatible with weather centres with item numbers 7002510, 7002511, 7002512 and 7002513 that have LOT number 1156743 or higher. For all units with a lower LOT number, you need the sensor with item number 7802510. You can check the LOT number on your unit as well as on the packaging.
FEATURES
Replacement wireless sensor, transmits data to the WiFi colour weather centre
Measures wind speed, wind direction, humidity, external temperature and precipitation
Transmission frequency: 868 MHz
Power supply: 3x AA batteries (not included)
SCOPE OF DELIVERY
Multifunctional external sensor
Mounting materials
No base station included
Instruction manual
In bedrooms, study rooms, living rooms, bathrooms, and even kitchens – continuously monitoring the room temperature is beneficial in many areas of the house to ensure a pleasant living climate. Therefore, you can enhance your weather station with this precise BRESSER Thermo Outdoor Sensor for another measurement location. The temperature data is quickly and reliably transmitted to the display of your base station from a distance of up to 80 meters.
How warm is it really here? The sensor has its own LCD display, so you can read the current temperature values directly on site. This makes the thermometer also ideal as a standalone thermometer.
Compatible with the following BRESSER weather stations:
7004200, 9604200, 7004210, 9604210, 9070300
FEATURES
Measurement of temperature
Clear LCD display
Suitable as a standalone solution, replacement, or additional sensor for some BRESSER weather stations
Range: up to 80 m
IP protection class: IP44
Dimensions: 71 x 64 x 22 mm / Weight: 44 g
Battery operated: 2x 1.5 V AAA batteries (not included)
SCOPE OF DELIVERY
Thermo radio sensor
Instruction manual
Remote sensor with temperature and humidity measuring. Eight channels settable.
Suitable for the following weather stations: 7007900000000, 7007910000000, 7008000000000, 7008001000000
FEATURES
Temperature measuring
Humidity measuring
8 channels settable
RC frequency: 433 MHz
Powered by battery; 2x AA (LR6) (not included!)
SCOPE OF DELIVERY
Remote sensor
Whether it’s the washing machine in your basement or the dishwasher in the kitchen, old appliances are susceptible to water leaks. The BRESSER water detector triggers a 90 dB alarm tone when it detects a leak. If the sensor is connected to your BRESSER weather station, a symbol will also appear on the display of your base station, allowing you to take action before the water causes serious damage.
Also a handy helper in aquaristics, where leaks occur frequently, for example when the sealing gasket on the external filter needs to be changed.
The water detector is compatible with the following BRESSER weather stations:
7003200, 7003210, 7003220, 7003230
FEATURES
Water sensor for detecting water leaks
Loud 90 dB alarm tone
Range of up to 150 m
7 available channels
Wireless and compact design
Power supply: 2x AA batteries (not included)
DELIVERY CONTENT
Water detector
Instruction manual
Radio controlled thermo/hygro sensor, suitable for the ClimaTrend WF weather station, new version (7007500GYE000 + 7007500HZI000).PLEASE NOTEThe sensor can only be used for the new version of the ClimaTrend WF weather station! You can check which version you have with help of the article number on the back of the weather station. For the models of the old version (article numbers 7007500 and 7007501) you need the remote sensor with the reference 7009996.FEATURESAdditional or spare sensor for ClimaTrend WF weather stations (ONLY NEW VERSIONS!)Remote sensor for temperature and humidityFold-out stand for table-top useAlso suitable for wall mountingSCOPE OF DELIVERY1x remote sensorFor remote sensors for other BRESSER weather stations please see the references 7009993 or 7009994 or 7009995.
If there’s something in the air, it’s probably not very good for us. This could be formaldehyde (HCHO) or Volatile Organic Compounds (VOC), which can enter our ambient air through things like furniture, materials, tobacco smoke, paints or adhesives. With the BRESSER HCHO + VOC Sensor, you can keep an eye on the air quality and take targeted measures to improve the situation. The integrated LC display of the sensor displays precise formaldehyde readings as well as the VOC level in the air.
Already have a compatible weather station from BRESSER? Then you can quickly connect the HCHO + VOC sensor and start to display the readings there as well.
Use the BRESSER HCHO + VOC Sensor as a stand-alone solution to keep an eye on your air quality, or as an extension for your weather station.The sensor is compatible with the following weather stations: Art.-No. 7003700 and 7003240 (you will find the Art.-No. on your weather station and the packaging).
FEATURES
Sensor for formaldehyde measurement (HCHO) with VOC content (Volatile Organic Compounds)
Can be used alone or with select BRESSER weather stations
Integrated LC display (37 x 21 mm) for displaying HCHO values and VOC content
With battery level indicator
4 available channels
Range: up to 150 m
Power supply: USB connection and/or 3x AA rechargeable batteries, 1.2 V (included)
Size: 82 x 120.5 x 43 mm
SCOPE OF DELIVERY
HCHO + VOC Sensor
3x AA rechargeable batteries, 1.2 V
USB cable
Weather station not included
Instruction manual
Living room, bathroom, kitchen, cellar – there are many rooms where it can be useful to monitor the indoor climate. If you’re in need of more temperature and humidity sensors for your home, this practical thermo-hygro sensor allows you to expand your existing BRESSER weather station for an additional measurement location. The sensor sends data to your base station over a frequency of 433 MHz at a range of up to 30 metres. What’s more, it also features a clear LCD display so that you can read the measurements directly from the device or use the sensor as a discreet standalone solution.
Compatible with the following BRESSER weather stations:
7004320, 7004310
FEATURES
Measures the temperature and humidity
Clear LCD display
Can be used as standalone solution or as an additional sensor for select BRESSER weather stations
Wireless transmission range: 30 m
Dimensions: 60 x 22 x 60 mm / Weight: 39 g
2x 1.5 V AAA batteries (included)
PACKAGE CONTENTS
Wireless thermo-hygro sensor
2x AAA batteries (1.5 V)
Instruction manual
This BRESSER soil sensor can be used as an add-on or replacement part for your Smart Garden watering system, and provides all the data you need to ensure your garden receives just the right amount of water. Ideal for flower beds, vegetable plots or lawns, it can be placed at a distance of up to 60 metres from your Smart Garden water timer. Once you've positioned the soil sensor, you can connect it to your weather station (not included), add it to the HomGar app and pair it with your water timer (not included) to obtain an overview of the soil moisture and temperature in the app interface or on the colour display of your Smart Garden station (not included). Based on these precise measurements, your Smart Garden watering system can optimise the flow of water - for example, if you connect a water timer (not included), you can use the app to configure the desired soil moisture and automatically stop your watering schedules when the preset soil moisture is reached.* Discover the BRESSER soil sensor and keep your garden in shape with precise measurements for your Smart Garden watering system!
FEATURES
Soil sensor for the BRESSER smart home watering systemProvides data for automatically adjusting your watering schedules in order to avoid overwatering*
Measures the soil humidity and temperature
Range for connection with water timer (not included): up to 60 metres
LED display of different moisture levels to help you save water
Data refresh frequency: 5 mins
Power supply: 3x AAA batteries (not included)
Dimensions: 135 x 135 x 95 mm, Weight: 175 g
DELIVERY CONTENT
Smart Garden soil sensor
Base station and water timer not included!
Instruction manual
*NOTE: Only use this function under supervision.
€39.99*
Cookies
We use cookies to personalise and improve content and services, deliver relevant advertising and provide a secure experience. You can review your cookie controls at any time. Learn more about the use and control of cookies in our privacy policy.Imprint
Functional cookies are absolutely necessary for the functionality of the web shop. These cookies assign a unique random ID to your browser so that your unhindered shopping experience can be guaranteed over several page views.
Google Pay payments
Amazon Pay
Stripe orig props:
Stripe referrer information.
Private machine identifier cookie:
Security token to identify the private machine.
Site auth:
Stripe authentication cookie.
Stripe csrf:
CSRF token.
PayPal payments
Cookie settings:
The cookie is used to store the cookie settings of the site user over several browser sessions.
Information on origin:
The cookie stores the referrer and the first page visited by the user for further use.
Payment provider (Stripe) session
Timezone:
The cookie is used to provide the system with the user's current time zone.
CAPTCHA integration
Payment provider (Stripe) session
Stripe:
The cookie is used by the payment provider to increase security when processing payments on the website.
Cache handling:
The cookie is used to differentiate the cache for different scenarios and page users.
Session:
The session cookie stores your shopping data over several page views and is therefore essential for your personal shopping experience.
Payment provider (Stripe) fraud prevention
Payment provider (Stripe) fraud prevention
CSRF token:
The CSRF token cookie contributes to your security. It strengthens the security of forms against unwanted hacker attacks.
Google Tag Manager debug mode:
Allows to run the Google Tag Manager in debug mode.
Activated cookies:
Saves which cookies have already been accepted by the user for the first time.
YouTube video
Location maps:
We use OpenStreetMap as tile provider to show you visually the location of our stores and merchants.
Recently viewed products:
The cookie stores the most recently viewed products in order to suggest them on further product pages.
Wishlist
Customers also viewed:
The cookie stores the most recently viewed products in order to suggest them to other customers on product pages.
Cookies used for statistics and shop performance metrics.
Conversion and usertracking via Google Tag Manager
Google Tag Manager:
Cookie from Google to control the advanced script and event handling.
Google Analytics:
Cookie from Google for website analysis. Generates statistical data about how the visitor uses the website.
Tracking cookies help the shop operator to collect and evaluate information about the behaviour of users on their website.
Matomo Tracking:
Tracking statistics for the optimization of user workflows. No personal data is stored.
Google Analytics:
Google Analytics is used for traffic analysis of the website. Thereby statistics about website activities can be created and read out.
Marketing cookies are used to display advertisements on the website in a targeted and individualized manner across multiple page views and browser sessions.
Google Advertising
Google Ads:
Advertising Targeting
Google AdSense:
The cookie is used by Google AdSense to promote advertising efficiency on the website.
Google conversion tracking:
The Google Conversion Tracking Cookie is used to track conversions on the website effectively. This information is used by the site operator to target Google AdWords campaigns.
To watch videos, you need to accept third-party cookies: