Weather station accessories and spare parts

Find the perfect sensors and base units for your system

Accessories

BRESSER 5-in-1 Outdoor Sensor for Weather Stations 7002510/7002511/7002512/7002513 from LOT Number 1156743 and 7002580

Has your 5-in-1 external sensor for your BRESSER WiFi colour weather centre succumbed to the impact of your child’s football or your last house move? Then it’s time for a replacement. And you don’t need to buy the whole product! This 5-in-1 external sensor is the perfect replacement part for your weather centre. It takes no time to install: Establish the power supply, take the mounting materials from the packaging and fit the wireless sensor at your preferred spot as normal. The existing base station will connect to the replacement external sensor automatically as normal. And if the two devices can’t find one another? You can manually intervene: Simply press the WiFi/SENSOR button on the base station and it will start to search for the new wireless sensor. Once connected, the local measured values for wind speed, wind direction, humidity, temperature and precipitation will be transmitted via 868 MHz to your colour display. Good prospects again: Get the full functionality from your WiFi colour weather sensor again with the 5-in-1 external sensor.PLEASE NOTE: This outdoor sensor is only compatible with weather centres with item numbers 7002510, 7002511, 7002512 and 7002513 that have LOT number 1156743 or higher. For all units with a lower LOT number, you need the sensor with item number 7802510. You can check the LOT number on your unit as well as on the packaging. FEATURES Replacement wireless sensor, transmits data to the WiFi colour weather centre Measures wind speed, wind direction, humidity, external temperature and precipitation Transmission frequency: 868 MHz Power supply: 3x AA batteries (not included) SCOPE OF DELIVERY Multifunctional external sensor Mounting materials No base station included Instruction manual

€99.00*

BRESSER Precision Thermo-Hygro Sensor

This high-performance outdoor temperature and humidity sensor is the perfect extension for your BRESSER weather station. The sensor transmits measurement data over an ultra-long wireless range of to 150 metres at a frequency of 868 MHz. There are seven different wireless channels available to choose from. Thanks to the built-in display, you can also use the precision thermo-hygro sensor as a standalone solution without a weather centre. Compatible with the following BRESSER weather stations: 7003200, 7003210, 7003220, 7003230, 7002580, 7002585, WSX1001, 7902535, 7902534, 7002541, WSX3001, 7003500, 9080600, 7002586, 7006300, WSH4102, 7003600, 7003300, 7003510, WSX5003, 7003100 FEATURES Temperature measurement function Humidity measurement function 7 available channels Built-in display, can also be used as a standalone solution without a weather centre Temperature range: -20 ~ 60℃ Wireless frequency: 868 MHz Ultra-long range of up to 150 m Battery-operated with 2x AA batteries (not included) DELIVERY CONTENT Outdoor sensor Instruction manual

€34.95*

BRESSER Thermo-Hygro Sensor 3CH - Suitable for BRESSER Thermo-Hygrometer

Thermo/Hygro sensor suitable for the BRESSER Thermo/Hygrometer weather station with the article numbers: 95-01200, 95-01201, 95-01202 & 70-07400This outdoor sensor for weather stations, article numbers: 7009993, 7009995 or 7009996.FEATURESSuitable for the following BRESSER weather stations: 9501200, 9501201, 9501202 & 70074003 channel available433 MHz transmitting frequencyFoldable standIntegrated hole for easy wall mountingRequires 2x AAA batteries (not included)SCOPE OF DELIVERYThermo/Hygrometer

€19.99*

BRESSER Thermo-Hygro Sensor

Living room, bedroom and children's room, kitchen and of course the bathroom - all benefit from a regular room climate check to ensure optimal comfort. So, enhance your weather station with this BRESSER Thermo-Hygro Sensor, allowing you to monitor conditions at an additional location. The sensor sends data over a significant distance of up to 80 meters, instantly displaying it on your base station's screen. Wondering if it's really that warm? The sensor includes an LCD display for immediate, on-site verification of current readings. This feature also enables this temperature and humidity meter to function as a standalone thermo-hygrometer. Compatible with these BRESSER weather stations: 7000023, 7007201, 7004200, 9604200, 7007511, 9600028, 7000012CM3000, 7000012GYE000, 7000013, 9070600, 7000028, 7007402, 9070700, 9604210, 7004210, 7006500, 9604100, 9070300, 9070110, 7007520, 9070710, 7000030, 7007610, 7000002, 7000004, 7000020QT5000, 7000020CM3000, 7000020GYE000, 7001800QT5000, 7001800CM3000, 7001800GYE000, 7007550CM3000, 7007600QT5000, 7000022CM3000, 7007500, 7007501, 9080600, 8020210GYE000, 8020210CM3000, 7004330, 7004340, 7006310, 7000020QT5000, 7000020CM3000, 7000020GYE000, 7004220, 7000027, 7000029, 7000060, 7004350, 7004360, 7004370, 7004380, 7006510, 7007350, 7007620, 7000012CM3000, 7000012GYE000 FEATURES Measures temperature and humidity Easy-to-read LCD display Functions as an independent solution, or as a replacement or supplementary sensor for select BRESSER weather stations Maximum range of up to 80 meters IP Protection Class: IP44 Dimensions: 71 x 65 x 23 mm / weight: 44 g Powered by 2x 1.5V AAA batteries (not included) SCOPE OF DELIVERY Thermo-Hygro Sensor Instruction manual

€24.95*

BRESSER Thermo-Hygro Sensor 7 Channel 868 MHz

Remote sensor for measuring of temperature and humidity. Seven channels settable. With extra long radio range of 150 meters on a radio frequency of 868 MHz. Good news for Smarthome owners: The sensor can be connected to the system of the market leader Tuya. Suitable for the following BRESSER weather stations: 7902535, 7002541, WSX3001, 7003500, 9080600, 7002586, 7006300, WSH4102, 7003600, 7003300, 7003230, 7003210, 7003200, 7003220, 7003510, WSX5003, 7002531, 7002571, 7003100 Compatible with the following BRESSER weather stations, but exclusively with firmware version V1.11 or higher (download available on the product page of the BRESSER homepage): 7002580, 7002581 und 7002585/WSX1001 FEATURES Temperature measuring Humidity measuring 7 channels settable RC frequency: 868 MHz Extra long radio range of 150 meters! Suitable for smarthome systems by Tuya Powered by battery; 2x AA (LR6) (not included!) SCOPE OF DELIVERY Remote sensor

€34.95*

BRESSER Soil Temperature and Moisture Meter

This additional sensor allows you to take two additional practical measurements with your BRESSER weather station. In addition to the soil temperature, the sensor can also measure the soil moisture – ideal for plant lovers and gardeners. Measurements are sent to the base station at 60 second intervals. The soil moisture meter can be positioned up to 150 metres away from the base station. There are also 7 different channels to choose from. And thanks to the weatherproof housing, the wireless sensor is able to withstand adverse weather conditions. Compatible with the following BRESSER weather stations: 7003200, 7003210, 7003220, 7003230, 7002580, 7002585, WSX1001, 7902535, 7902534, 7002541, WSX3001, 7003500, 9080600, 7002586, 7006300, WSH4102, 7003600, 7003300, 7003510, WSX5003, 7003100 FEATURES Wireless and compact soil sensor Measures the soil humidity Measures the soil temperature Transmission interval: 60 seconds Extra-long range of up to 150 metres 7 available channels LED indicator for data transmission Weatherproof housing Battery-operated with 2x AA batteries (not included) DELIVERY CONTENT Soil sensor Instruction manual

€39.00*

BRESSER Spa and Pool thermometer

Want to cool off in your pool? This wireless and floating pool thermometer from BRESSER will tell you whether the water is at an optimal temperature. Measurements are shown on the built-in LCD display. You can also connect the pool thermometer to your BRESSER weather centre so that you can check the pool temperature from the comfort of your own home. The pool sensor is compatible with the following BRESSER weather stations: 7003200, 7003210, 7003220, 7003230, 7002580, 7002585, WSX1001, 7902535, 7902534, 7002541, WSX3001, 7003500, 9080600, 7002586, 7006300, WSH4102, 7003600, 7003300, 7003510, WSX5003, 7003100, 7002531 FEATURES Floating pool sensor for measuring the water temperature LCD display for displaying the temperature (°C/°F) Wireless frequency: 868 MHz Wireless transmission range of up to 30 m to optional base station 7 available channels Waterproof (IPX7) Powered by 2x AA batteries (not included) DELIVERY CONTENT Pool thermometer Instruction manual

€39.00*

BRESSER 7-in-1 Outdoor Sensor for 7003300

It's easily done: you've just moved house and want to move your 7-in-1 professional sensor for your BRESSER Wi-Fi Comfort weather centre to a new location. While attempting to move the sensor, you accidentally drop it and the sensor stops working. If this sounds like you, this 7-in-1 wireless sensor is just what you need for your weather station. The setup is the same as usual: simply insert the batteries (not included) and install your replacement sensor in the desired location using the mounting materials provided. Once you've installed the sensor, all you need to do is connect it to your existing base station (not included). Simply press the Wi-Fi/Sensor button on the base station, and the base station will search for the signal from your new outdoor sensor. The two devices will then automatically connect to each other. The local data from your sensor, including the outdoor temperature, humidity, wind speed, wind direction, rainfall, UV level and light intensity will appear on your elegant colour display. Restore full functionality to your Wi-Fi Comfort weather centre with the 7-in-1 replacement sensor. FEATURES Replacement wireless sensor, transmits data to the Wi-Fi Comfort weather centre Measures the outdoor temperature and outdoor humidity Measures the wind speed, wind direction and rainfall Measures the UV level and light intensity Transmission range of up to 150 metres Place in an unobstructed location in order to obtain accurate sunlight and rain data Power supply: 3x AA batteries (not included) DELIVERY CONTENT Wireless sensor Mounting materials Base station is not included! Instruction manual

€119.00*

BRESSER Lightning Detector

The BRESSER lightning detector keeps you informed during stormy weather. It displays a light signal when it detects a lightning strike within a range of approximately 40 kilometres. To get the most out of the lightning detector, you can connect it to your BRESSER weather centre: from there, you can view the time since the last lightning strike, including the estimated distance, as well as the number of lightning strikes per hour. And to ensure that the lightning sensor is configured to your surroundings, you can choose from 3 different sensor sensitivity levels. The lightning detector is compatible with the following BRESSER weather stations: 7003210, 7003220, 7003230, 7003240 FEATURES Lightning sensor for measuring lightning strikes Displays a light signal when a lightning strike is detected The following data can be viewed when connected to a compatible BRESSER weather centre:Time since last lightning strike, including estimated distanceNumber of lightning strikes per hour LED indicator for data transmission Range of up to 100 metres Adjustable sensor sensitivity (high/medium/low) Power supply: 2x AA batteries (not included) DELIVERY CONTENT Lightning sensor Instruction manual

€45.00*

BRESSER Thermo-Hygro Sensor 3CH for ClimaTrend MC/TB and most products of the ClimaTrend Series

Remote sensor with temperature and humidity display. Three channels settable.Suitable for the following weather stations:7004400, 7004400CM3000, 7004400GYE000, 7004401, 7004401CM3000, 7004401GYE000, 7004401HZI000, 7004402, 7004402CM3000, 7004402GYE000, 7004402HZI000, 7004403, 7004403CM3000, 7004403GYE000, 7004403HZI000, 7004404, 7004404CM3000, 7004404GYE000, 7004404HZI000, 7005000, 7005400, 7005404, 7005402, 7006400, 7006401, 7006402, 7006403, 7006404BRESSER ClimaTrend MC - Art. No. 70-07100BRESSER ClimaTrend TB - Art. No. 70-07200BRESSER Tendence FSX - Art. No.7060200FEATURESTemperature displayHumidity display3 channels settableRC frequency: 433 MHz SCOPE OF DELIVERYRemote sensorRequired batteries: 2x AA (LR6) (not included)

€29.99*

Battery Compartment Cover with Rubber Ring for 5-in-1 sensors

With this high-quality spare part, your BRESSER Multi outdoor sensor will be up and running again in no time.

€1.99*

BRESSER Additional / Spare Base Station for Weather Station 7002520

Please note that this item is a replacement item. The 5-in-1 sensor in not included! The base station from the 5-in-1 weather station - now also available individually - for an overview of measured values in multiple rooms. Place one base station in the living room and one in the bedroom to give you an ideal overview whichever room you're in. The BRESSER base station works with the BRESSER 5-in-1 Weather Station 7002520 as well as many other BRESSER weather station. (For compatibility, see below). The clearly structured display on the base station also displays a range of historical data. It enables internal storage and evaluation of the measured data over a 24-hour period. Using the measured data, the weather station calculates a very reliable local weather trend forecast for the next 12 hours, which is indicated on the display by six graphical symbols. There is a programmable alarm function for maximum and minimum values, which can emit an acoustic alarm and light signal if either value is reached. A special frost/ice warning alarm can also be configured for outdoor temperatures below -3 °C. A poor indoor climate can pose a particular health risk for children and the elderly. The BRESSER 5-in-1 Weather Station offers a smart feature to help tackle this. The indoor climate indicator uses symbols to visualise the current status of the indoor climate. In addition, the BRESSER 5-in-1 Weather Station also offers radio-controlled time and date setting (DCF time signal). The current central European time (CET) and date with day will be displayed within a few minutes of the device being switched on. A wake function with snooze function is also included. This weather station also features a new display that changes colour based on the outdoor temperature. Depending on the colour, you can decide whether you'll need a jacket or a T-shirt. Compatible with the following weather stations: 7002510 Bresser 5-in-1 Weather Station, black 7002511 Bresser 5-in-1 Weather Station, white 7002512 BRESSER WTW 5-in-1 Weather Station with wooden look 7002520CM3000 BRESSER 5-in-1 professional Weather Station with 256-colour display 7002550CM3000 BRESSER 5-in-1 Comfort Weather Station with colour display - available in black, white (7002550GYE000), or grey (7002550QT5000) FEATURES Base station for 5-in-1 multi-sensor and other weather stations Indoor temperature (°C/°F) and humidity Graphical weather trend display (12 hours) Beaufort index (scale for measuring wind speed) Rainfall with history (day/week/month) Air pressure with history (24 hours) Heat index Dewpoint Radio-controlled time and date settings Display changes colour based on outdoor temperature Alarm function Ice/frost warning Min./max. memory (up to 24 hours) DELIVERY CONTENT Base station Stand Power adapter

€39.99* €99.00* (59.61% saved)

BRESSER 7-in-1 Outdoor Sensor for 7003210/7003220/7003230/7003510 4CAST PRO Weather Station

One moment of inattention and it’s happened: The 7-in-1 solar outdoor sensor of your 4CAST PRO weather station by BRESSER didn't survive the move or the installation at its new location. A replacement is needed! However, since the base station is still working perfectly, you don’t want to buy a whole new weather station. That’s why this 7-in-1 solar wireless sensor is the spare part you’re looking for. You can install it as usual: Simply fit the wind vane and the rain gauge funnel, insert backup batteries, and—most importantly—position the solar panel according to your location. Only with the perfect spot in the sun will eco-friendly solar power flow all year round for reliable weather measurements through your solar wireless sensor. Once you’ve fixed the sensor in place and aligned it with the sun, you’re ready to connect it to the base station of your weather centre. The connection can be set up in no time: simply press the sensor/Wi-Fi button to enable synchronisation mode. Once the base station has paired with the sensor, your local measurements for the outdoor temperature, humidity, wind speed, wind direction, rainfall, UV level and light intensity will appear on the display. Clear skies or adverse weather – restore full functionality to your 4CAST PRO weather centre with this replacement solar-powered sensor. FEATURES Powered via a large movable solar panel In case of insufficient sunlight operation via 3x AA batteries (not included) Measures the temperature and humidity Measures the wind speed, wind direction and rainfall Measures the UV level and light intensity Power supply: solar panel, 3x AA batteries as back up (not included) Range: up to 150 m Dimensions: 390 x 174 x 465 mm DELIVERY CONTENT Solar-powered outdoor sensor Mounting materials Base station is not included! Instruction manual

€169.00*

BRESSER Thermo-Hygro RC Transmitter 5CH

BRESSER Thermo/Hygro RC transmitter, compatible with all weather stations with 433 MHz transmission frequency.This sensor is compatible with the following articles:7001001, 7001030, 7001101, 7002500, 7003101, 7004000, 7004001, 7004002, 7004110, 7004250, 7004300, 7004301, 7007000, 7007300QT5000, 7007300CM3000, 7008000, 7008001, 7009000.The appropriate outdoor sensor for other weather stations can be found under the article numbers 7009994, 7009995 or 7009996.

€19.99*

BRESSER 7-in-1 Outdoor Sensor for 7003200 4-Day 4CAST Wi-Fi Weather Station

Falling under the car when moving, taking a knock from a child's football, simply slipping from your hand during installation - even the most robust 7-in-1 wireless sensor is not immune to everyday misadventure. But, even if your outdoor sensor is permanently damaged beyond repair, there's no need to buy a whole new weather station simply to keep an eye on the weather. Your base station can continue to function perfectly. This sensor is the perfect replacement part for your 4-day 4CAST WiFi weather centre. The device is operated in much the same way as you are used to: Start by inserting the batteries (not included). Then, fit the replacement sensor in your preferred location using the installation material supplied. Once everything has been tightened up, all you need to do is connect to your base station (not included). With a replacement sensor, this is not an automatic process; you will needed to press the WiFi/SENSOR button on the console. The console will then start to search for the signal from the sensor. Connected? Then you're done, and you can start enjoying up-to-date and local weather data from your sensor for outdoor temperature and humidity, wind speed, wind direction, precipitation, UV level and light intensity. Rehabilitate your 4-day 4CAST WiFi weather centre with the replacement sensor. FEATURES Measures the temperature and humidity Measures the wind speed, wind direction and rainfall Measures the UV level and light intensity Solar power for longer battery lifespan Range: up to 150 m Power supply: 3x AA batteries (not included) Dimensions: 420 x 170 x 213 mm DELIVERY CONTENT Wireless sensor with installation material Base station not included! Instruction manual

€69.00* €149.00* (53.69% saved)

BRESSER Soil Sensor for 7510100 / 7510200 Smart Garden Smart Home Irrigation System

This BRESSER soil sensor can be used as an add-on or replacement part for your Smart Garden watering system, and provides all the data you need to ensure your garden receives just the right amount of water. Ideal for flower beds, vegetable plots or lawns, it can be placed at a distance of up to 60 metres from your Smart Garden water timer. Once you've positioned the soil sensor, you can connect it to your weather station (not included), add it to the HomGar app and pair it with your water timer (not included) to obtain an overview of the soil moisture and temperature in the app interface or on the colour display of your Smart Garden station (not included). Based on these precise measurements, your Smart Garden watering system can optimise the flow of water - for example, if you connect a water timer (not included), you can use the app to configure the desired soil moisture and automatically stop your watering schedules when the preset soil moisture is reached.* Discover the BRESSER soil sensor and keep your garden in shape with precise measurements for your Smart Garden watering system! FEATURES Soil sensor for the BRESSER smart home watering systemProvides data for automatically adjusting your watering schedules in order to avoid overwatering* Measures the soil humidity and temperature Range for connection with water timer (not included): up to 60 metres LED display of different moisture levels to help you save water Data refresh frequency: 5 mins Power supply: 3x AAA batteries (not included) Dimensions: 135 x 135 x 95 mm, Weight: 175 g DELIVERY CONTENT Smart Garden soil sensor Base station and water timer not included! Instruction manual *NOTE: Only use this function under supervision.

€39.99*

Black Wind Vane

With this high-quality spare part, your BRESSER Multi outdoor sensor will be up and running again in no time.

€1.99*

BRESSER Additional / Spare Base Station for Weather Station 7002510

The base station from the 5-in-1 weather station – now also individually – for an overview of measured values in multiple rooms. A base station in the living room and one in the bedroom, giving you an ideal overview whichever room you’re in. The BRESSER base station works with the BRESSER 5-in-1 weather station 7002510 as well as many other BRESSER weather stations. (For compatibility, see below). The clearly structured display on the base station also displays a range of history data. It enables internal storage and evaluation of the measured data over a 24-hour period. Using the measured data, the weather station calculates a very reliable local weather trend forecast for the next 12 hours, which is indicated on the display by six graphical symbols. There is a programmable alarm function for maximum and minimum values, which can emit an acoustic alarm and light signal if either value is reached. A special frost/ice warning alarm can also be configured for outdoor temperatures from -3 °C. A poor indoor climate can pose a particular health risk for children and the elderly. The BRESSER 5-in-1 weather station offers a smart feature to help tackle this. The indoor climate indicator uses symbols to visualise the current status of the indoor climate. In addition, the BRESSER 5-in-1 weather station also offers radio-controlled time and date setting (DCF time signal). The current central European time (CET) and date with day will be displayed within a few minutes of the device being switched on. For the moonstruck, the display also indicates the various phases of the moon. A wake function with snooze function is also included. Compatibility with the following weather stations: 7002510 BRESSER 5-in-1 Weather Station black7002511 BRESSER 5-in-1 Weather Station white7002512 BRESSER WTW 5-in-1 Weather Station WTW7002520CM3000 BRESSER 5-in-1 Professional Weather Station with 256 Colour Display black7002550CM3000 BRESSER 5-in-1 Comfort Weather Station with Colour Display black FEATURES Base station for 5-in-1 multisensor and other weather stations Indoor temperature (°C/°F) and humidity Graphical weather trend display (12 hours) Beaufort index (scale for measuring wind speed) Rainfall with history (day/week/month) Air pressure with history (24 hours) Heat index Dewpoint Radio-controlled time and date settings Phases of the moon Alarm function Ice/frost warning Min/max memory (up to 24 hours) LED backlight, amber-coloured with removable stand and suspension device Requires 3x AA batteries WHAT’S INCLUDED Base station Stand

€69.00*

Grey Wind Cups

With this high-quality spare part, your BRESSER Multi outdoor sensor will be up and running again in no time.

€2.89*

BRESSER Water Detector

Whether it’s the washing machine in your basement or the dishwasher in the kitchen, old appliances are susceptible to water leaks. The BRESSER water detector triggers a 90 dB alarm tone when it detects a leak. If the sensor is connected to your BRESSER weather station, a symbol will also appear on the display of your base station, allowing you to take action before the water causes serious damage. Also a handy helper in aquaristics, where leaks occur frequently, for example when the sealing gasket on the external filter needs to be changed. The water detector is compatible with the following BRESSER weather stations: 7003200, 7003210, 7003220, 7003230 FEATURES Water sensor for detecting water leaks Loud 90 dB alarm tone Range of up to 150 m 7 available channels Wireless and compact design Power supply: 2x AA batteries (not included) DELIVERY CONTENT Water detector Instruction manual

€19.99* €45.00* (55.58% saved)

BRESSER Additional / Spare Base Station for Weather Station 7003100

If you have a 7-in-1 ClimateScout Weather Station, this additional base station allows you to access the full range of functions and weather data in an additional room. For example, by placing the additional base station in your bedroom, you can view the measurements from your outdoor sensor and decide what to wear for the day based on the weather conditions. The original base station can then be kept in your living room to give everyone in your household an overview of the outdoor temperature, outdoor humidity, wind speed, wind direction, rainfall, UV and light intensity. With this additional base station, you can see what the weather is doing from both rooms! The base station also has a sleek, elegant design that was designed specially for BRESSER and fits in with all interior styles. Monitor your indoor climate with an additional ClimateScout base station In addition to the data from your outdoor sensors (not included), the additional base station also shows you indoor measurements. Is mould likely to develop in your bathroom? Is the air in your baby's bedroom too dry? Simply place the additional station in the corresponding location and the built-in sensor will show you the indoor temperature (°C/°F), humidity and air pressure. Happy or sad smiley, with or without drops: Thanks to the graphical indoor climate indicator, you can quickly ascertain the current comfort level and take appropriate action to improve your indoor climate. There is also a weather alarm, which allows you to set your desired maximum and minimum weather values independently of your other base station. Your additional base station will inform you when the temperature, humidity, rainfall, wind speed and other values reach your preset limits. Radio-controlled clock In addition to a modern design, the weather console also features a radio controlled clock that syncs the time via a DCF signal and automatically switches between winter and summer time. If you need an early start, the base station also has a built-in alarm. If you need a few extra minutes in bed, simply press the snooze button to silence the alarm for 5 minutes. During the winter, you can enable the frost alarm, which makes the alarm go off 30 minutes earlier when the outdoor temperature drops below -3 °C. The intuitive display also shows The day of the week, date and phases of the moon at the top of the screen. View your weather data in an extra room with this additional base station! BASE STATION FEATURES Receives weather data from 7-in-1 outdoor sensor for ClimateScout Weather Station via 868 MHz RF transmission frequency Clear, professional display with time and comprehensive weather information Integrated sensor for indoor temperature (°C/°F), humidity and air pressure with air pressure trend (24 hours) Room climate indicator Maximum and minimum value alarm Automatic cycle mode displays the different channels from additional sensors (not included) in 4-second intervals DCF time synchronisation (Central European Time, time delay can be set for use in other time zones), automatically switches between winter and summer time Alarm with snooze function and frost warning Time, calendar, day of the week and moon phase display Min./max. memory (up to 24 hours) Backlight Displays the graphical weather trend (12 hours) Displays the outdoor temperature (°C/°F), humidity, air pressure, UV index and light intensity (Klux, Kfc, W/m2) Displays the Beaufort index (scale for measuring wind speed) Displays rainfall data: hourly, daily, weekly, monthly, total precipitation (in/mm) - with indicator Weather index display for dewpoint, windchill factor and heat index Displays day of the week and wind direction in 5 languages EN/DE/FR/ES/IT) Can be wall-mounted or placed on desktop Base station dimensions: 180 x 135 x 22 mm (W x H x D) Display size: 125 x 77 mm (W x H) Power supply: 4x AA (not included) DELIVERY CONTENT Additional base station External sensor not included! Instruction manual

Colour

black grey silver white

€19.99* €69.00* (71.03% saved)

BRESSER HCHO + VOC Sensor

If there’s something in the air, it’s probably not very good for us. This could be formaldehyde (HCHO) or Volatile Organic Compounds (VOC), which can enter our ambient air through things like furniture, materials, tobacco smoke, paints or adhesives. With the BRESSER HCHO + VOC Sensor, you can keep an eye on the air quality and take targeted measures to improve the situation. The integrated LC display of the sensor displays precise formaldehyde readings as well as the VOC level in the air. Already have a compatible weather station from BRESSER? Then you can quickly connect the HCHO + VOC sensor and start to display the readings there as well. Use the BRESSER HCHO + VOC Sensor as a stand-alone solution to keep an eye on your air quality, or as an extension for your weather station.The sensor is compatible with the following weather stations: Art.-No. 7003700 and 7003240 (you will find the Art.-No. on your weather station and the packaging). FEATURES Sensor for formaldehyde measurement (HCHO) with VOC content (Volatile Organic Compounds) Can be used alone or with select BRESSER weather stations Integrated LC display (37 x 21 mm) for displaying HCHO values and VOC content With battery level indicator 4 available channels Range: up to 150 m Power supply: USB connection and/or 3x AA rechargeable batteries, 1.2 V (included) Size: 82 x 120.5 x 43 mm SCOPE OF DELIVERY HCHO + VOC Sensor 3x AA rechargeable batteries, 1.2 V USB cable Weather station not included Instruction manual

€189.00*

BRESSER Thermo Outdoor Sensor

In bedrooms, study rooms, living rooms, bathrooms, and even kitchens – continuously monitoring the room temperature is beneficial in many areas of the house to ensure a pleasant living climate. Therefore, you can enhance your weather station with this precise BRESSER Thermo Outdoor Sensor for another measurement location. The temperature data is quickly and reliably transmitted to the display of your base station from a distance of up to 80 meters. How warm is it really here? The sensor has its own LCD display, so you can read the current temperature values directly on site. This makes the thermometer also ideal as a standalone thermometer. Compatible with the following BRESSER weather stations: 7004200, 9604200, 7004210, 9604210, 9070300 FEATURES Measurement of temperature Clear LCD display Suitable as a standalone solution, replacement, or additional sensor for some BRESSER weather stations Range: up to 80 m IP protection class: IP44 Dimensions: 71 x 64 x 22 mm / Weight: 44 g Battery operated: 2x 1.5 V AAA batteries (not included) SCOPE OF DELIVERY Thermo radio sensor Instruction manual

€24.95*

BRESSER Thermo-Hygro Sensor

Living room, bathroom, kitchen, cellar – there are many rooms where it can be useful to monitor the indoor climate. If you’re in need of more temperature and humidity sensors for your home, this practical thermo-hygro sensor allows you to expand your existing BRESSER weather station for an additional measurement location. The sensor sends data to your base station over a frequency of 433 MHz at a range of up to 30 metres. What’s more, it also features a clear LCD display so that you can read the measurements directly from the device or use the sensor as a discreet standalone solution. Compatible with the following BRESSER weather stations: 7004320, 7004310 FEATURES Measures the temperature and humidity Clear LCD display Can be used as standalone solution or as an additional sensor for select BRESSER weather stations Wireless transmission range: 30 m Dimensions: 60 x 22 x 60 mm / Weight: 39 g 2x 1.5 V AAA batteries (included) PACKAGE CONTENTS Wireless thermo-hygro sensor 2x AAA batteries (1.5 V) Instruction manual

€24.95*

Accessories for Weather Stations

With the right accessories for your Bresser weather station, you can get even more out of it. A wireless sensor to measure humidity and temperature, or a wireless sensor that allows the transmission of temperature, humidity, and time information via Bluetooth to your smartphone. Here, you'll find what you're looking for.